Automated Manufacturing Robots - FABTECH

[@kummer45]

Flawless video. No irrelevant music, no intro, no distractions. Just the machines, their work, the computers and their tasks. 10/10.

[@BobbyIronsights]

Agreed.

[@thesteelrodent1796]

hardly flawless. Most the video is in double speed for no reason

[@daaave2142]

This factorio update looking fresh as hell

[@XeLYoutube]

stop it i wish

[@UltraNyan]

2:38 I just found a new stepper for my 3d printer

[@oxaile4021]

Are you gonna 3d print a ship?

[@communistthanos3642]

@@oxaile4021 nah he’s gonna print your mom

[@backinyourcommentsectionag3191]

LMFAO

[@Parkskiingftw]

Great idea, you will just have to remember to cut the power to your house before you can even get it spinning. Alternating current, DC current, who cares! They both transfer energy, those are just buzz words anyways.

[@michaelumstead2473]

Anyone know where this is and what it’s called

[@walula]

2:41 has an Aperture Science vibe to it

[@shitsmith9877]

I think it was on purpose

[@xxmrspudgunsxx161]

My words exactly

[@Flec2507]

I was confused when Wheatley didnt pop up on screen

[@cortex8185]

Cave Johnson, we're done here.

[@TheNamesArif]

Panels

[@josuelservin2409]

Is just mind boggling the way robotics has evolved just in the past couple of decades. Thanks for sharing those awesome demos!

[@erikseuranen6197]

😊

[@tumblevveed3586]

I don’t know what’s more fascinating... The robots or the software that controls them. This is awesome stuff.

[@MrTjp420]

the day robots write their own software, will that day be a blessing or a curse?

[@jsgames6843]

The hardware is always more impressive, software is just a set of instructions that can't exist without the hardware

[@aleksandersuur9475]

The hardware definitely, the software behind it is almost universally a steaming pile of fecal matter, it's almost enforced by available toolchains and development environments. The root of the evil is that everything is proprietary to a piece of hardware you buy. If you buy a robot, it'll come with it's own proprietary programming language nobody else in the world uses and of course the entire toolchain is proprietary too. It's a curse of small closed ecosystems, there are so many carpets to hide some shit under and all of them are used to maximum capacity. It doesn't help that a hardware company is unlikely to be also good at software and vice versa, yet all vendors insist on trying to do both.

[@godofdestructiondiecast6756]

These machines been around for many decades I remember when I was in high school in the early 2000s I went in the gm plant these machines been doing these jobs for many years and that was then I can only imagine now what they're capable of doing and the sad part is a lot of jobs are going to be lost

[@XathosPvP]

2:50 That thing is terrifying xD

[@Logical_Controls]

This video is essentially pornographic material for engineers. Are we sure this won't get taken down by KZbin? 😂

[@ProtoG42]

😂

[@SwarthySkinnedOne]

Yeah, I guess in the way of mass production robotics and mechatronics. Impressive but which makes the future look a bit bleak for the blue collars yet to come of age.

[@ProtoG42]

@@SwarthySkinnedOne I think there is room for both. I manage a sheet metal manufacturing facility in Florida and I do not see these machines competing with us for quite a while. I can make 100 parts or enclosures that I've never made before much faster compared to the time it takes to set up and program something like this. Even with a somewhat complex enclosure, I can go from a drawing to a finished part in an hour from getting the model. A local job shop will be much cheaper and faster most of the time for a run of 100-200 parts compared to a much larger automated facility. A large automated plant will not want to run prototypes or small runs for you without a contract for thousands of parts.

[@SwarthySkinnedOne]

Proto G Engineering I'm not so sure about that. Seems the only folks fairly immune to automations replacements are folks like you - Management, Executives, IT pros, and maintenance folks - the guys needed to stick around to make sure some mechamakeitnoid don't crash or bite the dust from some data hickup......and WD-40 heartburn:) ha ha. The systems are rather fascinating I have to admit shown in this vid and similar ones, however the intimidation of it all kind of makes me feel I should have in college taken up industrial one-arm robo laborers and production mechanisms...instead of the teachers time. Pah ha ha:) But for folks like us with limited career talents.... Geez I just don't know man. I've a whisper of an unsettling hunch telling me it's gonna be increasingly slim pickings for us keep body and soul together as time marches on. I mean as they are these machines, in my book, are slick and sophisticated enough, and Goddamn!! no telling how much more super dynamic they'll become 10 years from now, what with systems and cybernetics evolution knowing no end. It's like some of us laborers will have to pack up and move to a different planet, like see if the Martians are hiring, pah ha ha ha:) Well, nice speaking with you pal.

[@SwarthySkinnedOne]

Proto G Engineering Alright man, If I put my foot into it (as it seems I've lost you here) well...oh well. It's just that thad to say what I did. I'm a thinking man you know.

[@Cheppy44]

I was just at Pack Expo in Chicago a couple weeks ago and it was amazing seeing all the the automation equipment some of these companies are producing. Thanks for the awesome videos!

[@geekim242]

GIA ĐÌNH BẠN CÓ THỂ TIẾT KIỆM ĐIỆN TỪ 80-100% LÀ CHUYỆN TRONG TẦM TAY CÔNG TY NĂNG LƯỢNG XANH GEE có cung cấp thiết bị hệ thống điện mặt trời hòa lưới và lưu trữ, giúp cho tất cả mọi nhà ở, nhà máy, khách sạn, chung cư, siêu thị, bệnh viện... với các ưu điểm nổi bậc như sau: 1. Không bao giờ bị mất điện ngay cả khi EVN cúp điện. 2. Tiết kiệm điện từ 80-100% cả ban ngày lẫn ban đêm tùy qui mô sử dụng, lắp đặt trên toàn quốc. 3. Bán điện thừa lại cho EVN. 4. Hạn chế được sử dụng điện lưới giờ cao điểm =>tiết kiệm chi phí tiền điện so với giờ thấp điểm. 5. Hạn chế được sử dụng điện lưới giờ bình thường =>tiết kiệm chi phí tiền điện so với giờ thấp điểm. Ngoài ra bên Công Ty GEE chúng tôi còn có các giải pháp giúp tiết kiệm năng lượng cho hệ thống điều hòa không khí trung tâm như : Chiller , VRV, VRF, Heat pump, tiết kiệm năng lượng từ 10-30% so với hiện tại. Mọi chi tiết xin liên hệ: HCM 0906685447 0962790447 0903878447 0398079447 Email: [e-mail] CC [e-mail] www.gee.com.vn Buổi hội thảo công nghệ BMS KMC Controls với IOT & Cloud tại Hà Nội kzbin.info/www/bejne/d6OkiH-Lpb6mj80 Hệ thống điện mặt trời hòa lưới và lưu trữ kzbin.info/www/bejne/n3WYmmuJi8pmhJY

[@andrewQueDeLlee]

I object! This Moscow - made tools&machines.. We r the first in this universe!

[@atrocious_pr0xy]

these robos are flexing on us, man. lookin' all suave.. the bit where there were monitors attached to the heads of those four robots was cool.

[@simpleasliam657]

Love watching robots making stuff especially for the automotive industry

[@PodeCoet]

My favorite robot is at 2:40 - Such a cute dance!

[@ProtoG42]

Mine too and I really liked the 4 robots behind it moving the TVs around.

[@DreitTheDarkDragon]

Totally not inspired by Portal 2

[@xXYannuschXx]

2:37 Holy mother of stepper motor!

[@GypsyBackwards]

am I the only one drooling?

[@TheYavy]

I was shocked when i saw that too

[@smokemirrors1531]

this video is truly amazing and makes me feel like i've been in a time warp. And Kawasaki makes lots of these. lol

[@AThreeDogNight]

Really nice to see all of that, we have come a long way. Thanks for the Vid.

[@ProtoG42]

Thanks for watching!

[@angeloyanke150]

I really have no idea what is happening but this is just tremendously impressive stuff. Go humans!

[@Budabaii]

shhh, you'll anger the robots.

[@BrunoPOWEEER]

Wooowwww I’ve been to some automation expo but nothing like that with all this ACTION everywhere hahaaa this is just AWESOME ohhh yeaaahhh

[@antiprotonnewnewenergyco.l1582]

In China u may find same machine but cheaper price than them [e-mail], any intrest contact me

[@jackielim4458]

Amazing work these engineers who designed the machine deserve respect more than those who bully three little children to cheat for money in Malaysia. Can't compare

[@TestSubject173]

2:41 Gotta get one of these for my monitor if I ever get rich.

[@deavman]

The best part is at the end... 7:30 when machines are finally turned off, lights are switched off and it's time to go home to wife and kids.

[@popocart5304]

The large stepper made me laugh

[@beachboardfan9544]

Daaaamn fabtech looks awesome! Went to one in Florida like 12ish years ago and it wasnt like this!

[@ProtoG42]

It was my first time going and the machines there were incredible. I didn't film everything as there were over 1500 exhibitors in the 3 large buildings of the convention center!

[@beachboardfan9544]

What city was this one at?

[@ProtoG42]

@@beachboardfan9544 Atlanta

[@beachboardfan9544]

Also the matte black 👌

[@crazystuffproduction]

would of enjoyed this if you didnt speed everything up 2x, i enjoy hearing the background convos and what people are presenting at these things

[@IonRoux]

Some of the shorter clips were just too fast at 2x as well

[@ProtoG42]

You can watch at half speed. There were no conversations worth hearing in the clips I sped up.

[@ProtoG42]

@@IonRoux you can watch at half speed. I didn't want the video to be over 10 minutes long.

[@ProtoG42]

I didn't speed up the first few minutes.

[@IonRoux]

@@ProtoG42 That is what I ended up doing

[@cwang4ever]

Amazing technology. Amazing people who invented them.

[@movax20h]

2:37 That is madness.

[@UpcycleElectronics]

2:45 that is straight up DoF p0rnagraphic. This thing needs an audio amplifier on board as I bet someone could/would manage to program it to dance to the beat while working at the same time. That's certainly the most complex freedom of movement I've ever seen on a robotic arm. Thanks for the upload. -Jake

[@ProtoG42]

Thanks for watching!

[@bentahipolito5237]

Essas imagens que estão aparecendo no video faz parte do conserto do microondas que pedi?

[@MagikEh]

Wow! that was super cool man! Thanks for taking us along for the ride here ;D

[@ProtoG42]

Thanks for watching!

[@AmaiPerry]

Woww.. great 😍 greetings from AmaiPerry 🌺 Indonesia

[@sky173]

Awesome stuff! ..and thanks for not adding some crappy music to it.

[@tuskiomisham]

2:37 ah yes, the elusive NEMA128 stepper motor

[@Concrete_Jake]

This is just amazing, I love everything.

[@geekim242]

GIA ĐÌNH BẠN CÓ THỂ TIẾT KIỆM ĐIỆN TỪ 80-100% LÀ CHUYỆN TRONG TẦM TAY CÔNG TY NĂNG LƯỢNG XANH GEE có cung cấp thiết bị hệ thống điện mặt trời hòa lưới và lưu trữ, giúp cho tất cả mọi nhà ở, nhà máy, khách sạn, chung cư, siêu thị, bệnh viện... với các ưu điểm nổi bậc như sau: 1. Không bao giờ bị mất điện ngay cả khi EVN cúp điện. 2. Tiết kiệm điện từ 80-100% cả ban ngày lẫn ban đêm tùy qui mô sử dụng, lắp đặt trên toàn quốc. 3. Bán điện thừa lại cho EVN. 4. Hạn chế được sử dụng điện lưới giờ cao điểm =>tiết kiệm chi phí tiền điện so với giờ thấp điểm. 5. Hạn chế được sử dụng điện lưới giờ bình thường =>tiết kiệm chi phí tiền điện so với giờ thấp điểm. Ngoài ra bên Công Ty GEE chúng tôi còn có các giải pháp giúp tiết kiệm năng lượng cho hệ thống điều hòa không khí trung tâm như : Chiller , VRV, VRF, Heat pump, tiết kiệm năng lượng từ 10-30% so với hiện tại. Mọi chi tiết xin liên hệ: HCM 0906685447 0962790447 0903878447 0398079447 Email: [e-mail] CC [e-mail] www.gee.com.vn Buổi hội thảo công nghệ BMS KMC Controls với IOT & Cloud tại Hà Nội kzbin.info/www/bejne/d6OkiH-Lpb6mj80 Hệ thống điện mặt trời hòa lưới và lưu trữ kzbin.info/www/bejne/n3WYmmuJi8pmhJY

[@chrisdabrit123]

This video is as impressive as it is SCARY !!!

[@garagelab_lucas_gongora]

yo llegue a trabajar con KUKA y FANUC, y me anamoré de la robotica industrial mas aun!!!

[@jordirosales42]

Sabes cuál es minuto 7 gracias

[@thenervousmechanicofficialpage]

Holy crap....is that a fully automated brake!!!!!

[@TB1611]

2:00 that's straight up the machine that replaces Charlie's dad in Charlie and the chocolate factory

[@ericlotze7724]

lol

[@ericlotze7724]

Wait was it the old one, or the new one?

[@moofymoo]

2:41 - does this robot pause his program and start showing off every time it detects that someone is looking at it?

[@famscrow]

Chemical Brothers - Believe * INTENSIFIES !!!!*

[@StuHaightVideo]

Are things like these open for the general public to come walk around and look at? Are there similar conventions at the convention center in DC?

[@funy0n583]

2:41 anybody else notice how the video on the monitors looks just like an aperture science animation

[@brodobroggins]

Is it safe for them to be welding on the show floor without any visual protection?

[@ProtoG42]

There was no real welding in any of these clips. Just going through the motions. They did have some robots welding behind welding curtains but it doesn't make for good video. There was some unshielded plasma cutting going on that I thought was a little unsafe but I didn't see any unprotected welding.

[@ChrisTrunek]

ahh came to comments because the motions just seemed insanely fast, like they would break the fixtures or shake like crazy. I didnt realize some were sped up. Made me think they needed tails, or some type of equally articulated counterweight that could be controlled to help prevent vibration artifacts in the movements.

[@automatedfigment]

A student doing a homework in front of their parent or teacher: 0:45 When they are not being watched: 0:27

[@sweetspot8011]

full automation... no complaints, just add few drops of grease and electric power please, maybe tuneups and some software updates

[@omaralejandroagundisgarcia8817]

What a beautiful material. Thank you very much for share it. Regards!!

[@Hgulix62]

That moment when you realize we already live in the future, but you are not part of it. Kinda make me realize how a fcked up my education .. maybe it's time to go back and do what i am passionate about Or maybe it's the generic 2am urge to take drastic changes

[@michaelumstead2473]

Where is this and what was it called I wanna go! In boca raton?!?!?!?

[@AndreOliveira-yr6kt]

Beautiful Automation!!

[@sverduijn1]

I was thinking about a car polishing robot, seems it already exists :( at 3:41 ..

[@Silvontavares]

So what can you make to improve the existent ideia and offer another solution.

[@jdawson6045]

To hell with the others, build that car polishing robot, build that robot and let it rule you, let it dominate youre entire life, since resistance is futile to the new android race you must succumb and feed to it, this is your destiny.

[@tchaikovskygoss7410]

Who makes the automated tube bending cell at 3:21?

[@DarkMatterLP1]

2:40 some real appertrue science stuff there with the tv-s xD

[@hoosky1143]

1:47 such a sick beat

[@haryomukarnadi3282]

Amazing mechatronic & automatic technic exibition, Where is this (country and city)? The axles of robot make it very agil and move very accurate. How about operating hours of it, any maintenance?

[@Kolenment]

Are we finally reaching that "future" world everyone fantasizes about?

[@rusticagenerica]

Stunning video.

[@k7y]

0:33​ when Asian level workers start flexing.

[@nebucadneza1914]

Damn i miss going to those events... factorio 2.0 looking good

[@krilaksh69]

May I know where this automation exhibition was held? And when will be next?

[@JohnJaggerJack]

Is that supposed to be a stepper motor? For what?

[@JuniorMazzon]

02:41 This is Aperture Laboratories

[@that-one3408]

Thats so cool!

[@mallikali6344]

0

[@linkspyder]

how much for the one to polish my car (3:40)?

[@vibrion121]

Intrigued by the toolmaster machine. An automatic bender tool exchange?

[@ProtoG42]

Yeah, there were a few machines like that from different companies that each had their own way of changing the forming tools. I preferred the machines that had the tooling behind the machine vs. a large carousel to the side of the machine. The press brakes that automatically set up the tooling for you were starting at around $500,000.00 including tooling.

[@izafas]

Anyone know who makes the bender at 3:20? That thing is damn nice.

[@khanch.6807]

KAWASAKI Robotics

[@akrep289]

This is great ❤️❤️

[@andrewpraytor7994]

Does anyone know the name of the type of conveyor at 2:10 to 2:19 in the vid?

[@nodescriptionavailable3842]

Nice quick work without any awareness of quality Robots

[@user_Francisco]

In minute 01:24 ,Does someone know what kind of steel is used in that work?

[@carrillominjares342]

Omg the machines are dope

[@ProtoG42]

I know, right!? I was disappointed that I couldn’t go last year to make an updated video but I will try my best this year!

[@Stallnig]

2:41...GLaDOS *heavy monotone snthetic breathing*

[@temmietemmieson6756]

Stallnig totally. Sadly I thought that was the speed in real time but it’s multiplied by 2...

[@dmitriyking1998]

@@temmietemmieson6756 just change speed to .5

[@temmietemmieson6756]

Dmitriy King No! I meant I wished it moved THAT fast in reality whereas it doesn’t.. it’s slower in reality as I can see by slowing down the video to 0.5.

[@beanieteamie7435]

The panels in the back are something straight put of Portal.

[@andrewQueDeLlee]

Oooooo! Made in Mascow RF.... & working thruough the solar sistem!

[@HardKore5250]

Can it do electrical retrofitting?

[@mab7727]

What controller/Program does it use ?

[@keeler1160]

Are all these clips at a convention center? If so what convention is this? I would love to go to a convention where I can see all kinds of different robots.

[@pandoxno3]

anybody know the manufacturer @1:15 ? Or @3:50 ?

[@HardKore5250]

Can it do skilled trades?

[@ProtoG42]

Sheet metal forming and welding are skilled trades so yes, some skilled trades can be automated.

[@HardKore5250]

Will they all be automated in the future? How powerful is artificial intelligence and automation?

[@Vlad_4572]

What is the purpose of speed X2???

[@smilu97]

I like that outro

[@megawolf75]

Wow....robots are the future ... at least in performance

[@TriangleBox]

*Heaven For Engineers*

[@justinchang6763]

does anyone know what course and path I need to take in college in order to make these amazing machine?

[@oceanman3804]

Mechanical engineering, electrical engineering, robotics engineering might be some of the options you want to look into.

[@Unfinished_Projects]

Does anyone know what that enormous thing between 2:37 and 2:40 is or the name of the manufacturer? Looks like a big stepper but I doubt its really that...

[@ProtoG42]

A giant servo motor. AIDA servo motors are used in stamping presses that range in capacity from 80 tons to 3000 tons.

[@Unfinished_Projects]

@@ProtoG42 Thank you so much for the fast response! Really like your channel. ESP32 Delta brought me here 👍

[@TheYavy]

@@ProtoG42 damn i was so impressed when i ve saw that 3k huh? I would never expect that its crazy!

[@yudirudiat6499]

1:49 good beat , add some music instrument would be awesome

[@ahmadfaizbinidris94]

This is fixed automation, right?

[@ghostintheroom]

0:46 great now do it with ammo production

[@АндрейПетров-е8ц4у]

7:27 - Купил такой же мячик-глобус в пятёрочке. Можно зажать его под монитором, и во время работы представлять, что управляешь всем Миром, как какой-нибудь злой гений. Или добрый.. В зависимости от настроения :))

[@aiccapitaniotailoredautoma5095]

Great video!

[@inbakumaran794]

4m30sec what machine....? Which brand?

[@nequals151]

Looks like it's being fast forwarded? The people in the background seem to be moving too fast?

[@道法自然-b6z]

2:13的凸轮机构设计的挺好的,好紧凑

[@SouthernHerdsman]

1:47: "my hy-press brings all the boys to the yard, they're like, it's better than uars damn right, it's better than uars.."

[@xenontesla122]

That's hilarious!

[@TechnokidYT]

Now that's AWESOME!

[@notube5496]

Can i make some of these at home by my self ? 😅

[@testiclestoshirleycles5755]

how much money is a robet?

[@sanjuking3836]

MY WISH TO HUG THESE MACHINES

[@thw1852]

Very interesting and good material. But the 2x speed makes it unrealistic. Usually on events like this the company's are trying to show the max possible. That's what I would like to see. Just sayin'

[@ProtoG42]

Thanks. I spent time clearly labelling at the top of the video which clips are real time speed and which are sped up. You can change the playback speed to 0.5x very easily for the clips that you're interested in see real time.

[@sum2automation]

Yup, totally awesome. Programmmmmmmmmming

[@hambiscuit4048]

1:29 does anyone know what that is I am thinking it’s a trof

[@IcanCwhatUsay]

What convention/show is this from?

[@ProtoG42]

Fabtech. It's a yearly fabrication technology trade show. Usually switching locations between Atlanta and Chicago.

[@pulppunk7936]

6:44 rdj?