Automatic Hand Sanitizer Dispenser | Homemade | Wall Mount

[@manojnair7793]

The real sound of malayali

[@BehindTheClutter]

😂 yeah, but it will get better .

[@srinathsathyanath7435]

@@BehindTheClutter great job man. More you practice better it gets

[@laleethapa2098]

V÷÷-

[@akhile1833]

കണ്ട് പിടിച്ചല്ലേ 😁

[@guntiradha298]

Hi bro how much volt of water pump did you used

[@BehindTheClutter]

It's rated as 3-6V input. I gave it 5V as input.

[@warmexpression]

An another introverted talent!!

[@BehindTheClutter]

Thank you for the support 😀

[@khousalyap3182]

Attach 5v dc motor and check it is working or not sir

[@BehindTheClutter]

how old are you bro?

[@BehindTheClutter]

Contact me on instagram @behindtheclutter

[@khousalyap3182]

12

[@BehindTheClutter]

You are so young, keep on learning.👌

[@khousalyap3182]

I made an smart dustbin seeing KZbin and an light following robot without arduino and without motor driver and i made ldr darkness and ldr brightness sir and now i am going to make an object following robot without using microcontroller using transistor only

[@ardurinocreater8529]

But in may videos they are using 5v battrey is it good

[@BehindTheClutter]

Acutelly, 5V batteries or chargers are more suitable for this project. But it will work fine with 9V battery, I used 9V batteries here because it's easily available everywhere.

[@riteshpanchal7677]

Can I use tip420 transistor instead of bd140 please please reply bro

[@riteshpanchal7677]

Pla reply sir

[@BehindTheClutter]

I think it's TIP42C, if so you can use it. But you have to modify the circuit according to the pins of TIP42C.

[@riteshpanchal7677]

How can I modify its circuit my suggest me sir....please reply

[@BehindTheClutter]

Bro, Try this circuit, use TIP42C instead of TIP32C, drive.google.com/file/d/15becIFcnI_VXTKnoECD585Nyn0Gw8RIh/view?usp=sharing

[@BehindTheClutter]

The difference between both circuit is that in BD140 pins are in the order emitter collector base and in TIP42C it's in the reverse order.

[@khousalyap3182]

Sir what does the transistor does in the circuit what purpose

[@BehindTheClutter]

The transistor is used as a switch. When you show your hand the IR sensor send a 0V at the base of the transistor then the transistor will conduct and the switch is turned On and your pump will work.

[@khousalyap3182]

For that we need to cut the transistor or not

[@BehindTheClutter]

No you don't have to cut the transistor

[@khousalyap3182]

May we directly attach waterpump to ir sensor without any rely or transistor and without arduino does it work

[@BehindTheClutter]

No it won't

[@prateeksharanjan2204]

What is the apparatus and it's specifications?

[@BehindTheClutter]

What do mean by that ? Everything I used is detailed in the video itself. Then main components are BD140 transistor IR module 1kohm resistor 3-6V water pump Tube 9V battery Sanitizer

[@girishsharma3241]

I didi it with big body. Using gravity but it still dripping. Cam o use solenlid valve? But how to convert 24v solinood with 5v semsor

[@BehindTheClutter]

You will need a different circuit. You can add a voltage regulator like LM7805 to supply 5V to Sensor and another transistor like TIP32C to switch the higher power for the solinoid. Better use 12V solinoid.

[@hrishi3780]

Hi

[@hrishi3780]

You can simply cut the pipe inside and put it in another larger diameter pipe , so larger diameter pipe would come outside of box for dispensing. Let smaller pipe hang inside that large pipe to avoid air seal. So that siphoning would be avoided. Don't change circuit. It works.

[@BehindTheClutter]

@hrishi I'll try that, thank you for the feedback.

[@miteshlakhwani]

@@hrishi3780 hi can you please explain with a simple diagram? I was looking for something like this without solenoid valve

[@ardurinocreater8529]

Sir how many volt it gives in the collector pin of the transistor

[@BehindTheClutter]

Depending up on the input you can get up to 80V. Here in this circuit it's 9V

[@aparnasuresh3512]

Exactly right... 👍 !!!!! Keep going 😍

[@BehindTheClutter]

Thank you 😀

[@khousalyap3182]

Sir the bd140 transistor is not in stock sir

[@BehindTheClutter]

You can use TIP32C

[@khousalyap3182]

Sir but tip32c is not good than bd140 transistor

[@BehindTheClutter]

TIP32C is a more powerful transistor than BD140 with a higher current and voltage rating

[@suneilnevgi8386]

can it be connected with ultrasonic sensor as it is. or can you suggest a way to connect to ultrasonic sensor.

[@BehindTheClutter]

Ultrasonic Sensors can be used for making the circuit. but I don't think it can be used without a processor. IR sensor is a proximity sensor it will only see if there is something in its path, so we can use it directly. In case of ultrasonic sensors it's used for measuring the distance from the object and is having more range than IR sensor. so we need something to recognize the distance and switch on pump. I have created a circuit that work on Ultrasonic sensor with the help of Arduino. check the link below for the circuit. drive.google.com/drive/folders/1BzQ4o-z5-o_cx9E8OY1FcO6Gne6xiPHy?usp=sharing

[@sangeethakr5963]

Good job👍

[@BehindTheClutter]

Thank you 😀

[@nissie7838]

Super video.

[@BehindTheClutter]

Thank you 😀

[@khousalyap3182]

I want to do this circuit on breadboard work and say whether we can do this in by or not without cutting the transistor

[@BehindTheClutter]

You can connect it directly no need to cut the transistor.

[@khousalyap3182]

Is there any capacitor in the water pump

[@BehindTheClutter]

Nope

[@mainalisaraswoti6837]

Which valve should be used to avoid dropping of sanitizer due to gravity

[@BehindTheClutter]

You can use a solenoid valve instead of pump.

[@prasadben1335]

after you remove your hand, the flow will not stop, because of siphon effect. i.e. outlet end of pipe is held lower than the inlet end. therefore the tank will be emptied. (liquid passes freely through inlet to outlet within the motor too, . i suggest you need an solenoid valve too, to stop the flow. anyways good work, Cheers ;-)

[@BehindTheClutter]

It was a problem in the begining. After that I installed a valve to reduce the flow, but even after that it was dripping. So I cut a pen refiller and insert it inside the outlet tube. Now the problem is fixed. The fluid won't come out due to back pressure form air and surface tension. Thank you for the feedback and support.😀

[@mainalisaraswoti6837]

@@BehindTheClutter can you please suggest me which valve should be used .

[@khousalyap3182]

How to check bd140 transistor is working or not

[@BehindTheClutter]

Check the continuity between base and the remaining 2 pins with negative prob on base, using a multimeter. You should get a value between 500-800 ohms

[@khousalyap3182]

Sir do we compolsorey need to cut the 2 pins of the transistor on doing this in breadboard also

[@BehindTheClutter]

That is not at all necessary.

[@umiishetty3118]

If you want to cut otherwise as your requirement you can cut .

[@khousalyap3182]

Sir the bd140 transistor is not available in robu please give some other online link which is in stock and it will work please give the link

[@BehindTheClutter]

Bro, try Amazon www.amazon.in/Transistors-Combo-BD139-10Pieces-Pieces/dp/B07LGBKSHT/ref=sr_1_2?crid=2JMXRC94QNWZO&dchild=1&keywords=bd140+transistor&qid=1595961244&sprefix=BD140%2Caps%2C853&sr=8-2

[@khousalyap3182]

Does the transistor uses as a power increaser

[@BehindTheClutter]

Transistors can be used as an amplifier, but in this case it's a switch.

[@manshi_0411]

Can you please tell me all the things name used in making electrical hand sanitizer...!!

[@BehindTheClutter]

3-6V water pump BD140 or TIP32C transistor 1k resistor 9V battery SPST switch IR sensor module or TSOP sensor module Aquarium tubes Tapes Wire Container These are the components needed to make this project.

[@vijayauukannann2797]

Can we use bc547 transistor ?

[@BehindTheClutter]

No, BC547 is an NPN transistor with low current rating. Here I'm using a PNP transistor.

[@ardurinocreater8529]

Sir are you using 9v battery

[@BehindTheClutter]

Yes, it will work fine.

[@gopigovind956]

Sir...sencer light glows but liquid outside not coming.pls support

[@BehindTheClutter]

I think you have connected it wrong. Did you use the same components?

[@balaabirami6948]

Is it will on sunlight otherwise darkroom only ah...

[@BehindTheClutter]

It will work anywhere, but it will have difficulties if you expose it to direct sunlight.

[@balaabirami6948]

Then how it can be rectified

[@BehindTheClutter]

In this project it's placed at the bottom portion, so it won't get direct exposure to sunlight.

[@vijayauukannann2797]

I am a school student...i wanna try this project ...can u pls tell me how the transistor acts as a switch in this case..??

[@BehindTheClutter]

Here the IR sensor is having +Ve 5V as default output and is supplied to the base, in this time there won't be any current flow inside transistor. When you show your hands IR module sense it and supply 0 volt as output, when the base is having a voltage drop the current flows from emitter to collector of the transistor and as the collector is attached to the motor, it will run the motor.

[@anilaali6610]

How much is this

[@BehindTheClutter]

This one is not for sale, you can make one own your own.😀

[@anilaali6610]

@@BehindTheClutter ok I don't want it

[@asejaseasejase7007]

Hi bro Good job good idea

[@BehindTheClutter]

Thank you for the support 😀

[@kavitaraut8542]

Can i use BD139 transistor?

[@BehindTheClutter]

BD139 is an NPN transistor while BD140 is PNP so you can't use it with this Circuit. But you can use any other PNP transistors with similar properties.

[@classicsalted]

Nicely done

[@BehindTheClutter]

Thank you 😀

[@suneilnevgi8386]

Please make one with ultrasonic sensor as it is more reliable. Thanks for your video and nice work

[@BehindTheClutter]

good suggestion, thank you for the support!

[@9544751399]

Can I use 547bc?

[@BehindTheClutter]

No, it's an NPN transistor with low current ratings, here I'm using PNP. So it it's not compatible.

[@ridhimabhardwaj1176]

can you please tell the names of material with price and also pls tell if we don't have that device to join (steel Melter one) then what can we use instead?

[@BehindTheClutter]

For this project you need:- a mini water pump, 1k resistor, IR module, 9V battery and some tubes. The melting device is called soldering iron and it's melting 'lead'.

[@BehindTheClutter]

There is no alternatives, but if you want you can make one using pencil, still it won't be as efficient as the original. if you are interested check that out from the link below. kzbin.info/www/bejne/h4GVoap_aquel9E

[@ridhimabhardwaj1176]

@@BehindTheClutter Thank you so much, It will surely help😊

[@BehindTheClutter]

You are welcome 😃

[@nagarjunr4061]

Does it work in sunlight plz comment

[@BehindTheClutter]

No, if it's exposed to direct sunlight it will run continuously by detecting the IR rays present in sunlight, but still you can use it during daytime of its not directly exposed. I recorded this video at 2 pm outside my house and I didn't experience any problem. But next day morning when sunlight strike directly it stated working continuously.

[@nagarjunr4061]

@@BehindTheClutter thank u for u r reply , I also faced same problem I will place it in shady place

[@khousalyap3182]

May we use 3v - 5v dc motor

[@BehindTheClutter]

You can make a pump using normal dc motor, but I can't be submerged in normal sanitizer. You have to place the pump outside the bottle.

[@khousalyap3182]

Sir does this circuit work on bc547 transistor

[@BehindTheClutter]

No it won't. BC547 is an NPN transistor with low current rating and BD140 is PNP .

[@saching9746]

Nice👍

[@BehindTheClutter]

Thank you

[@abhinandpk120]

How did you prevent suction

[@BehindTheClutter]

Sorry, I didn't get you. What suction should I prevent?

[@gakwavudavid1394]

Great Job! Can you list down all materials used sir?

[@BehindTheClutter]

Thank you, I have listed everything in the discription , with online links. But it will be cheaper if you buy it ofline .

[@khousalyap3182]

Sir may we make this in breadboard does it work

[@BehindTheClutter]

Yes, we can make this on breadboard.

[@anilkrishnaraj9512]

Good work

[@BehindTheClutter]

Thank you

[@anilaali6610]

I want it

[@anilaali6610]

Yes, I want it to

[@BehindTheClutter]

You can make it 😃

[@anilaali6610]

@@BehindTheClutter l want it because I love it

[@BehindTheClutter]

Thank you for the support 😍

[@khousalyap3182]

Sir does it really work for everyone

[@BehindTheClutter]

Means?

[@khousalyap3182]

Sir how to identify the pins of the transistor

[@BehindTheClutter]

You can check for datasheet on that particular transistor in Google

[@josejpuli]

Nice video.👍👍 Can you introduce about yourself in one video!! We subscribers are eagerly waiting to know more about you. It would be better if you come live for a Q&A session!!

[@BehindTheClutter]

Why not, I'll do it one day. Thank you for your support 😀

[@amarvangani7585]

How long will the battery last

[@BehindTheClutter]

Battery life depends on the usage. with continues usage it will dain out in 2-3 days. To avoid that you can replace the battery with a 6V power adaptor.

[@nityasrivastava574]

Do you take orders to make this on huge scale?

[@BehindTheClutter]

I would like to take orders and mass produce it. But currently I don't have the machineries or man power to do so.

[@nityasrivastava574]

Okay thankyou so much!

[@BehindTheClutter]

Acutally, How many units do you need ?

[@nityasrivastava574]

Behind The Clutter 250-350

[@BehindTheClutter]

Bro, it will take more than 2 months to buy components and manufacture. If you only need the same circuit with a cardboard case it will cost you around 150. And if you need a circuit using microcontroller. It will cost much more than that.

[@surennakarmi9714]

Can I use 4202BD instead of 140BD plz reply fast

[@BehindTheClutter]

BD140 is a PNP transistor and 4202BD is an NPN transistor and is for higher voltage . So you will need a different circuit to use that transistor.

[@surennakarmi9714]

Thank you

[@ardurinocreater8529]

Sir it is not working with battery what can i do

[@BehindTheClutter]

Check whether the component you are using are working properly ?

[@robleeandroid]

Awesome! How do you add a 555 timer to this?

[@BehindTheClutter]

You have to make a seperate circuit for the 555 IC as per your required time delay and attach it to transistor output.

[@zionalexis2876]

You prolly dont care at all but does anyone know a tool to log back into an Instagram account..? I stupidly forgot the account password. I appreciate any tips you can give me.

[@romankaiden3645]

@Zion Alexis instablaster =)

[@zionalexis2876]

@Roman Kaiden thanks so much for your reply. I got to the site through google and im waiting for the hacking stuff now. Takes a while so I will get back to you later with my results.

[@zionalexis2876]

@Roman Kaiden It worked and I now got access to my account again. Im so happy! Thanks so much, you really help me out !

[@ambur0007]

Great work bro

[@BehindTheClutter]

Thank you 😀

[@irfansalim6179]

Useful video👍🏻

[@BehindTheClutter]

Thank you 😀

[@mdmoieez6646]

Bro can you help to project

[@bhappy877]

I made it by using Arduino and ultrasonic sensor bt i m facng two prblms.. 1) prblm with a coding: As i want a code or instruction so that in one cycle only 1 or max. 2 doze of disinfectant comes & one has to move away the hand to start next doze. 2) i want to use smal submersible motor with rechrgng module but when we outlet the pipe frm bottom side it leaks the liquid ofcrse bcx of gravity so can u plz help me out with this.

[@BehindTheClutter]

1) Try using this circuit and the code and see if it works. drive.google.com/drive/folders/1BzQ4o-z5-o_cx9E8OY1FcO6Gne6xiPHy?usp=sharing 2) To prevent dripping, use an aquarium flow control valve or simply use 2 washers like I did in this video. If the problem persists then cut a pen refiller and insert it inside the tube, Then it will stop dripping due to surface tension.

[@bhappy877]

Frstly Thnk u so mch fr kind reply..i give a try fr ur suggestn and .sir, i used aduino nano kit

[@BehindTheClutter]

Ok 👍

[@khousalyap3182]

I have subscribed to your channel

[@BehindTheClutter]

Thank you so much 😃

[@hrishi3780]

Hi buddy, you can use fish tank's air pipe flow control to control flow, available at 10 RS only. And too lightweight. I used same.

[@BehindTheClutter]

Yeah Bro, thank you for the feedback.

[@khousalyap3182]

I mean does it work every time 100%

[@BehindTheClutter]

Yes, it will work everytime, if all components are good.

[@khousalyap3182]

How to check bd140 transistor is working or not

[@chitraranjan6626]

Please share the working for the same!

[@BehindTheClutter]

Sorry I didn't get you. Are you asking for the Circuit diagram or do you want me to explain the working?

[@BehindTheClutter]

Here the circuit diagram. It's the same you only need to replace the transistor with bd140. drive.google.com/file/d/15becIFcnI_VXTKnoECD585Nyn0Gw8RIh/view?usp=sharing

[@chitraranjan6626]

Behind The Clutter I was asking you to explain the working

[@BehindTheClutter]

Here we use the PNP transistor as a switch. When you show your hand infornt of the IR sensor, it detects your hand and send 0V to the base of the transistor. then the transistor will conduct and the switch is turned on and connect the battery to the pump and the pump will work.

[@manunair9535]

good video!!

[@BehindTheClutter]

Thank you

[@jolin950]

Poli sanam🥰

[@BehindTheClutter]

Thank you Bro 😀

[@NareshVTS]

Hi bro, you are using sanitizer or water? Please study about pump submersible suitable for alcohol? Because alcohol is the flammable content better give another solution.

[@BehindTheClutter]

Bro, alcohol is flammable, but it's a bad conductor of electricity. So it's completely safe to use a motor/pump inside an alcohol container. Thank you for the feedback 😀.

[@syamp.s8382]

great...👏👏

[@BehindTheClutter]

Thank you 😀

[@shashwatjain5294]

What if we use 139 ?

[@BehindTheClutter]

Yes, you can use BD139, but it's an NPN transistor. BD140 is a PNP. So you have to modify the circuit. In NPN current flow will be in the opposite direction.

[@alanjohndavid5462]

Nice

[@BehindTheClutter]

Thank you 😀

[@AbnuCPaul]

കൊള്ളാം bro 👏

[@BehindTheClutter]

Thank you

[@shahbazkhandiamandcoolrefr8422]

Transistor ka kay number hai

[@BehindTheClutter]

BD140 PNP transistor

[@muhsinali4952]

Sunlight problem!? Bro aaa tube angna vechal motor one time trigger aayi kaynja pinna waterlevel thaazhe ayond sanitizer flow cheyth konde irkille!?

[@BehindTheClutter]

Adiyil ayondu sunlight problem undavilla, flow adjust cheyyan washers use cheythu pipe tight cheythu. Cheriya opening anu ullathu so airinte back pressure karanam stop flow akum. Ennittittum drip akunnu enkil hose opening narrow akkanam, for that you can cut an empty refiller and insert inside the hose, pinne drip cheyyilla.

[@athulkrishna3606]

Sunlight proof ir sensor kzbin.info/www/bejne/aHfVd3lniauBf68

[@nityasrivastava574]

Please share the circuit diagram.

[@BehindTheClutter]

Here is the Circuit diagram. It's the same but using a different transistor. drive.google.com/file/d/15becIFcnI_VXTKnoECD585Nyn0Gw8RIh/view?usp=sharing

[@nityasrivastava574]

Behind The Clutter thankyou so much

[@nityasrivastava574]

Behind The Clutter but USB is used here. i was looking forward to the circuit diagram consisting of the battery.

[@BehindTheClutter]

@@nityasrivastava574 here is the circuit diagram using Battery. But it's better if you use USB. drive.google.com/file/d/1hSJtVT1B9PG6yBv22bDTami3Doqpmb3F/view?usp=sharing

[@nityasrivastava574]

Behind The Clutter thankyou sir

[@deegeeenterprises1019]

well worked but without batter, instead using mobile charge..

[@BehindTheClutter]

👌, Thank you for trying it out

[@nityasrivastava574]

Kindly share the working.

[@BehindTheClutter]

I'm sorry, i didn't get you. Do you want me to explain the working? Or Are you asking for the Circuit diagram?.

[@nityasrivastava574]

Behind The Clutter both.

[@BehindTheClutter]

Here we use the PNP transistor as a switch. When you show your hand infornt of the IR sensor, it detects your hand and send 0V to the base of the transistor. then the transistor will conduct and the switch is turned on and connect the battery to the pump and the pump will work.

[@nityasrivastava574]

Behind The Clutter thankyou so much

[@roshnianair458]

👌👌👌

[@BehindTheClutter]

Thank you 😀

[@alanjohndavid5462]

The resistor is connected with the Collector of the transistor

[@BehindTheClutter]

No bro, In BD140, 3rd pin is base.

[@anandhavishnup.m4211]

Super bro

[@josejpuli]

Nee thiriche Chennai pokunnille??? Free aayitte Corona kittum

[@BehindTheClutter]

Thank you

[@shailendranaruka4559]

Brother upload also circuit diagram

[@BehindTheClutter]

Here you go bro, drive.google.com/file/d/15becIFcnI_VXTKnoECD585Nyn0Gw8RIh/view?usp=sharing

[@kumarson1]

Is it 150 rs. As you said

[@BehindTheClutter]

Yes, you can make it for just Rs150

[@kumarson1]

Can you please share the rates for each parts used ,😊🙏

[@BehindTheClutter]

I have provided links in the discription.

[@BehindTheClutter]

Motor-99 Sensor-39 Transistor - 5 Resistor- 2

[@sindhusuresh8122]

👍👍👍

[@BehindTheClutter]

Thank you

[@S.raj3740]

Ir sensor not works in sunlight

[@BehindTheClutter]

Yeah, sometimes IR sensors recieves false signals under direct exposure to sunlight as the sunlight is already having IR light. Still it will work fine in shades. But there are IR Sensors available in the market that can differentiate between sunlight and acutal signals. Thank you for the feedback 😀

[@TRAVELOFOODIES]

Waah adipoli

[@BehindTheClutter]

Thank you

[@Aswin_Abraham]

Sound malayali pole und malayali aano?

[@BehindTheClutter]

Athe. Malayali anu 😃

[@rakeshrocky658]

I see more videos how to connect it adaptor

[@BehindTheClutter]

Cut a data cable in half and connect the positive and negative wires (usually red and black) inside the cable to the IR module instead of the 9V battery adaptor. Connect the cable to a 5V 1A Power Supply/ Charger. It works better with 5V than 9V

[@Abhi0kallath]

ഹായ് ബ്രോ.. 😊 9v ബാറ്ററി വെച്ചുള്ള ഡിസ്പെൻസർ നോക്കി നടക്കുവാരുന്നു ഞാൻ..😉..കോഴപ്പം ഒന്നും ഇല്ലല്ലോ ല്ലേ..9v use ചെയ്യുന്നത് കൊണ്ട്..അതോ 7805 വെക്കണോ കൂടെ..???

[@BehindTheClutter]

9V Direct vekkunnathil kuzhappam illaa, But sensornte rated specified voltage 5V anu. So 7805 use cheyathal kure koode safe ayrikkum. Normal 9V batterikku capacity kurvanu, So use cheyyunne anusirichu pettennu thernnu pokum. So long term use anekil, it will be better if you use a changer or powerbank.

[@Abhi0kallath]

@@BehindTheClutter 6v nte cheriya battery kittuvo rechargable..like this 9v battery ?

[@BehindTheClutter]

6V Camera batteries undu but athu expensive anu, elladom kittukayum illa. Pinne emergency light nu varunna 6V lead acid batteries kittum but athu size valuthanu.

[@shinasshinu2148]

One week work cheyumo,,bro😀😀

[@BehindTheClutter]

battery will last only for few days, but if you connect it to a mobile charger, you can run it as long as you want.

[@candybaby5282]

Are u Malayali

[@BehindTheClutter]

Yes, I'm a Malayali 😊

[@subbyrahmed5756]

In 5:30sec in ur video u show block water like this way.. But its doesn't work always, so please fix this problem and make a video,, water drop can't control dude...

[@BehindTheClutter]

In 5:30 I only meant it can reduce the flow rate, otherwise it will empty the Sanitizer in minutes. If it's dripping, then cut a pen refill and insert it inside the the outlet tube. Then it will stop dripping. Thank you for the feedback 😀

[@sreejithshankark2012]

Accent typical malayali accent

[@BehindTheClutter]

😂 thats because I'm a malayali

[@831989sam]

It's for indoor use only it doesn't works in sunlight

[@BehindTheClutter]

Bro, first of all this video is shot outside. If you extend the bottom portion surrounding the sensors, then you can use it outdoor. The problem is that if you are using it under sunlight it will pump continuously. As the sunlight is having too much IR light and it will give false information to the reciever.

[@nirajkumar-wm5et]

I just made it but its not working at all...pls give your no or fb , insta anything ..pls need help..i just wanted to make it

[@ratsrc]

same

[@ratsrc]

same problem wid me

[@BehindTheClutter]

Did you had components as per the video? You can contact me @defender.scb on instagram.

[@nirajkumar-wm5et]

Yes we have same as your video...connected also the same

[@BehindTheClutter]

Send me a picture of your circuit. We will figure that out 👍

[@balabrahmamvelpula1037]

Total cost 580 you given parts price

[@BehindTheClutter]

IR Sensor:Rs 30 Pump:Rs 80 Transistor: Rs 5 Switch:Rs 5 Resistor:Rs 1 Hose: Rs 10/m Battery: Rs18 Buy it offline from a nearby electronics stores. If you buy it online, it will be expensive and most of the time they won't sell as single unit and you have to pay extra for shipping.

[@BehindTheClutter]

Or you can also try electronicscomp.com you can get the app from playstore. they have reasonable prices and are reliable. I use to buy from them. They will give free shipping on placing order above 999.

[@Ezra6012]

Malayali pwoli alle✌️

[@BehindTheClutter]

Athe 😀😀😀

[@crusssshhhh]

Contanor

[@BehindTheClutter]

Means? 🙄

[@progamerdk6825]

My Motor is already working before sensor senses

[@BehindTheClutter]

That's because the one you are using is a normal IR sensor. Our sunlight is already having plenty of IR rays. So it will give false signal to the senor and it wills start working. The solution are 1. Keeping the set up inside the room, ie, is away form sunlight. 2. Or you can use a TSOP ir sensor instead of normal IR sensor

[@srinathsathyanath7435]

Malayali alle???

[@BehindTheClutter]

Athee 😀

[@sindhumohan6141]

Malayali alle

[@BehindTheClutter]

Yes 👍

[@dancreation1634]

Try well in malayalam language you will lead to success you are talented boy

[@BehindTheClutter]

I would love to do it in Malayalam, but in this way I can improve my English over time. And someday I'll get a good accent too. Thank you for the support 😀.

[@guruprasathr1675]

Don't put wrong prices in template to increase your views

[@BehindTheClutter]

It not fake. You can make it at that price point. IR Sensor:Rs 30 Pump:Rs 80 Transistor: Rs 5 Switch:Rs 5 Resistor:Rs 1 Hose: Rs 10/m Battery: Rs18 Buy it offline from a nearby electronics stores. If you buy it online, it will be expensive and most of the time they won't sell as single unit and you have to pay extra for shipping.

[@BehindTheClutter]

Or you can also try electronicscomp.com you can get the app from playstore. they have reasonable prices and are reliable. I use to buy from them. They will give free shipping on orders above 999.

[@guruprasathr1675]

If you are true place me order for 5 sets of circuit

[@guruprasathr1675]

If you can give in that price I will promote your channel in my what's app and Instagram nd all