Automatic Light Switch Timer Installation | Defiant Timer Light Switch

[@mariano4617]

It’s June 2024 and this video is still helping us that enjoy making upgrades to our homes! Thank you! Appreciate you!😊

[@MichaelThomas-py5qy]

That was the most explanatorial version of setting that up that I've run across😊

[@didequen3339]

Guys most important feature you need to check is if the timer holds the settings in event of power outage. You might want to pay a bit more for those with such capability. You wont regret doing the reprogramming every time your house experience an outage :)

[@VerdoThomas]

Your tip on the electrical tape ultimately solved my problem. I was transposing the Line & Load. The tipoff was the tape the contractor electrician left on the Line wire. Thanks for pointing that out.

[@careyedwards5662]

Great video. Best explanation of how to install a wall timer switch. Was just about to call an electrician, when I came upon your video. You really save me some money. Thank you.

[@HowToHomeDIY]

Awesome! Glad it was helpful. Thank you for the feedback!

[@e.b.6766]

Thanks… needed this to explain it to the wife. She messed up the settings while attempting to change the On/ Off times. I know how to set it, but I have to be in front of it pressing the buttons; can’t explain it over the phone. This video touches on the subject enough for me to guide her through it.

[@HowToHomeDIY]

She messed up the settings? Dont let her see this haha. Awesome! I am really glad to hear it was able to help yall out!

[@suavobeme]

KZbin content makers to the rescue again! Thank you

[@dianapowers9950]

Thank you so very much for this instructional video. It was explained very carefully and slowly so that I could follow along and reset my timer. Thank you again.

[@2aalways362]

👍Great Job!!! Lot easier than the written instructions they sent with the switch😁

[@HowToHomeDIY]

Hey Eric, yeah those instructions are not worded the best haha. Glad it was helpful! Thank you for the feedback!

[@Kinshin84]

I just bought one like this and a complete noob at installing this. You made it very clear and easy for me.

[@HowToHomeDIY]

Hey Mister J, I am really glad to hear that it helped you. You will really like having it installed. I currently have 3 setup around my home. Thank you for that feedback!

[@mickcharlesbeaver4331]

Thanks a million! I didn't know what to do with the neutral wires and this was very clear.

[@casseymont1990]

I want to try this at my house. Thank you for sharing this video.

[@pjames4413]

Thanks Adam... I needed clarification on setting dusk dawn. Perfect.

[@HowToHomeDIY]

You are very welcome. Glad it was helpful. Thanks a lot for the feedback!

[@rguiliano39]

Thank you. Video definitely helped with my timer switch install. I would have never known to find the neutral wire hookup in back of the box.

[@snaptwain]

I have the GE SunSmart Digital Timer - looks to be exact same device. Great directions - was able to very quickly install - worked great. Many thanks!

[@maureenwhalen3505]

Thanks for the help

[@wassimkattan5552]

Hi Adam very simplified video thank, the only thing is i'm do not have natural wire connection in that box and not sure where to connect the jumper. it's only 1 socket switch for the porch with 3 wire, ground, load and line. ground, black and white. any tips on what to do. i connected everything like u did without the jumper and light didn't go on. thank you.

[@007yankeesrule]

Your video helped me install a light switch with a timer for some outdoor security lights. My timer is on the far left, but the wiring is the same. I wish I could send some pictures. Thank you for the help.

[@keithmurphy3021]

This was excellent and in plain english I could understand for my single switch. now I need to do my two location switch,

[@HowToHomeDIY]

Awesome! Really glad to hear that you liked it. Thanks for the feedback Keith, and good luck on the installs!

[@MichaelAarons1701]

Now this was helpful. I’m gonna need one of those custom plates because mine are the flip switches not the teeter switches that you can barely tell which way they are at a distance.

[@susanwelton4824]

This was perfect!! we got new light fixtures outside and wanted to change the setting on the timer...Worked exactly as you directed! THANKS!!

[@HowToHomeDIY]

Excellent! Really glad to hear it was able to help you! Thanks a lot for the feedback and enjoy those new lights!

[@rajaramrao4161]

Great instructions, easy to follow. Thanks.

[@stevejohnston2916]

will this method work on an outside light switch that is controlled by two different light switches? I hope that makes sense! One switch is in the house and the other is in the garage!

[@allenr265]

astronomical setting does what exactly instructions don't say. Thanks Mate. 😊👍

[@robertjardine1885]

This is a very organized and well crafted how to video. I only wish that the author would have discussed the installation of the switch in a 3 way switch application which this product is capable of. Otherwise thumbs up on this video.

[@HowToHomeDIY]

Hey Robert, yes unfortunately where I was installing it was not for a 3 way. I did talk about how to use it in a 3 way application which is super easy as you would just need the traveler wire that is connected at the other switch and connect the other end of it into the traveler port on this timer. Thank you for the feedback, I really appreciate it!

[@williehill5891]

The video was well done it made it easy for me to set up my light switch for my vacation thank you

[@HowToHomeDIY]

Awesome! Really glad to hear it was helpful. Thanks a lot for the feedback Willie and enjoy your vacation!

[@angeltaboada5471]

Thank you for sharing your knowledge that’s very helpful to me Man God blessed you

[@farooqquadri6987]

Very helpful and easy to understand and was able to program first time. Great job

[@HowToHomeDIY]

Thanks for the feedback! Enjoy it handling your lights for you!

[@stevek1527]

This video was an awesome video!!!! It was easy to \understand and I put the switch in less than 1/2 hour. Thank you!

[@HowToHomeDIY]

Awesome! Glad to hear you liked it and found it helpful. Thanks a lot for the feedback Steve and enjoy not having to remember to turn your lights on and off 😎

[@domingocastillo982]

Hi your video is very handy easy to do but I want how install a timer into 3 ways switch

[@GreggAnderson-c3s]

Adam, I've tried 3x to install this Defiant timer. Seems I have a mixed up incoming power or something. I can connect & program, but it doesn't do anything but stay running 24x7 or I can do the manual on off. I'm no electrician, but seems it should be working unless the box itself has screwed up in/out wiring.

[@rm8281]

Great video. You have the same type of 3-gang switch box that I have. This was perfect. Thanks.

[@HowToHomeDIY]

Awesome! Glad it helped!

[@ronnieday1601]

I just replaced a Defiant DTM-0024 timer switch with their model 32648. The older switch is a countdown timer that can be programmed up to 24 hours in one minute increments. I replaced it with the 32648 because I was under the impression that in manual mode the 32648 would bypass the timer/program modes completely and function as a regular SPST switch. However I noticed that when I put the switch in Manual mode it functions as a countdown timer, the same as my old switch. I've read through the instruction and searched online to see if I can get a definitive answer, but I'm afraid the 32648 won't do what I want. I haven't been able to find a customer support number or website, either. Thoughts? Thanks

[@stanschoeppey9396]

Thank you, Sir! Very helpful as usual.

[@davidkleiner284]

This was very helpful and well explained!

[@HowToHomeDIY]

I am really glad to hear you found it helpful. Thank you for the feedback David!

[@claralee4767]

Great, detailed video...crystal clear. Thank you.

[@HowToHomeDIY]

Hey Clara, thank you very much for the feedback! I am glad you found it helpful.

[@6736ccc]

How do you wire Defiant timer switch with 3 way will the standard switch still turn off lights when timer is on or off?

[@anonymousyoutuber7935]

Was that a stranded neutral wire

[@TheOgbojuode]

What time Zone do you set for California. The options sre NOR, CENT, SOU, & PRI. So, which one for California?

[@nitinrao6399]

Great video! Two questions: 1. What if you don't have a multimeter? Any other way to confirm no power? Not a big DIYer, so don't have a lot of tools. 2. I want to install the timer on a 3-way switch controlling two different light fixtures between the switches. Does it matter that there are two fixtures?

[@HowToHomeDIY]

Hey, if you shut the circuit breaker off that supplies the electricity to that light and then go inside and flip the switch on and off and the lights don’t come on like they usually do then you can be pretty sure that the power is off. There are some rare circumstances though where this might not be an accurate way to do it, for example the switch is broken or a wire came loose. The only way to know for sure is with a multimeter or voltage tester. As long as the two different light fixtures are currently being controlled by two 3 way switches then this should work. Just make sure to follow the instructions and diagram in the instructions as they won’t be wired exactly like your typical 3 way switch. I hope this helps! Thank you for the feedback!

[@anthonydemaio2873]

Better than the instructions Question if there is a power outage do you have to program it all over again?

[@HowToHomeDIY]

No there is an internal battery. But now that I’ve had mine about 4-5 years, the batteries seem to be wearing out and I have had to reprogram some of them.

[@1953joed]

I set up my Defiant timer light switch. After I set up the Dusk to Dawn for my area and set that up for my area, do you stop there and will my lights turn off and on with dusk and dawn settings? Or do you have to program the lights as well for the days of the week in that setting?

[@Louey5161]

Can I replace a thermostat using it's wires to turn the heat on and off as scheduled?

[@yumboi]

What do you do if you have no ground wire?

[@joshmcgrain9926]

Is there a way to add a dimmer function to a timer switch?

[@jefftilley1779]

Do you lose the function of one of the switches in a 3 way application? Would it only be operated by the timer and manual override location?

[@supermariolover5063]

What is Random mode does?

[@kennethnegaard7599]

Good job Adam. Thank you!

[@HowToHomeDIY]

You're welcome Kenneth! Glad you liked it!

[@gabrielucros9616]

What brand would you recommend I like your videos a lot Thanks

[@HowToHomeDIY]

Hey Gabriel, I really like mine. It is made by Defiant and can be found at one of the big box home improvement stores. I included a link in the description to one that is almost identical that is made by GE if you want to check it out as well. Hope this helps. Thank you for the feedback!

[@gabrielucros9616]

@@HowToHomeDIY thanks, I'll check it out at Home Depot

[@RSGANTA]

Hi tried the follow the instructions. Somehow my lights are not lighting up even manually. I have put all line, load neutraland ground wire as well. Any idea?

[@Steve_in_Texas]

Interesting and very useful video, thanks for taking the time to upload!! This unit is for a light but could it be used for an an "ordinary" circuit? What I'd like to do is to have a couple of sockets permanently rigged up to be operated by a timer for outdoor holiday lights. That way, I can avoid having several timers and running lots of leads, and have a just a few leads running to the same outlet which would be on a timer. Thanks, and keep up the great videos!!

[@franksilva3302]

My old switch only has 2 cables hooked up to it (2 blacks) which I’m guessing one is the line and one is the load. My grounds are all tied up together as well as my neutrals. Does this mean i have to jump my ground as well?

[@MattGulick-t7k]

My Defiant timer is another model with more buttons. How can I find the setup and programming instructions for it?

[@brianhersh8236]

Hi Adam. Is there a way to install a timer switch to be a timed off instead of on?

[@curteskridge5451]

Can you do a follow up after the sense has been running for a while.

[@EngTecher]

I am adding a Defiant programmable #32648, but the light switch has only a black wire (hot) and a white. The ground copper bare wire is not connected to the light. There are no neutral or common wire on any of the 3 light switches: 1 to the porch lights, 2 to dining room chandelier, & 3rd to ceiling foyer light. Went to Home Depot to ask what to do, was asked to just add a common wire hooked up to either a electrical outlet or ceiling light. I am not clear to where i add the common wire to the digital programmable Defiant?

[@izbiz671]

Does the "load" wire connect directly to the light?

[@marconotarianni2007]

I did everything that you have said. However, when I connect the neutral jumper to all the neutrals in the wall, my circuit breaker does not turn on the panel. When I remove the jumper from the switch the breaker now works and the display is on but I cannot turn on/off the light outside. Any suggestions?

[@ra78100]

Great video! Thanks

[@HowToHomeDIY]

Really glad to hear you liked it. Thanks a lot for the feedback!

[@maudefarrington8102]

Thank you for this video.

[@steveec9704]

If the load and line wire sometimes are different colors would the red wire be the line wire or the other way?

[@aakksshhaayy]

Use a multimeter to measure voltage

[@KoarngeSound]

incredible channel man

[@HowToHomeDIY]

Appreciate it! Thanks for the feedback!

[@glennsinner5986]

What if I forgot to label the line wire? How do I determine which of 2 black wires is the load and line wires?

[@rays8102]

Awesome! thank you!

[@HowToHomeDIY]

You're welcome! Glad you liked it. Thanks a lot for the feedback!

[@cindyrsdu5555]

We installed this unit in June 2022, but when the power goes out, it loses everything and have to reprogram it. It’s was installed to turn on the front porch light. Can you please tell me why it doesn’t keep the program when we lose power. This United is only almost 3 months old. Thank you, Cindy

[@raulruelas9443]

Thank you for making this video!

[@HowToHomeDIY]

You are welcome! I am glad you liked it. Thanks for the feedback Raul!

[@shedroids]

Awesomely explained, thank you!

[@johnpicard4909]

Thank you. Keep up the good work! I’m enjoying the learning.

[@HowToHomeDIY]

Thank you! I am glad you are enjoying it.

[@charlesreeves2737]

What do you do if you don’t have a ground wire On the switch in the box already and only have 2 black wires ??

[@raysharplessjr]

I have just purchased a timer switch that tells me i need 4 wires to connect it. I only have 3 wires in the box. White, black and ground. My voltage tester only goes off near the white wire, not near the black. Did i buy the wrong switch?

[@Janus5691]

Hello. I have a GE inwall digital timer #15806. I programed it and it works fine but it keeps flashing the word "timer" next to the clock display. It had never done that before and the instruction sheet says nothing about why it would be doing this. Can you explain this to me and how to fix it. Thank you.

[@maureenwhalen3505]

Thanks for the help

[@HowToHomeDIY]

Happy to help

[@demoll78]

Does the electric saver 1200 really works

[@michaelt7396]

I definitely learned something.

[@5086nashua]

Great video. Helped out a lot!

[@HowToHomeDIY]

Awesome! Glad it helped! Thanks for the feedback Steve.

[@mikelambert7715]

Looking to “sync” two of them. Any suggestions other than getting the times as close as possible?

[@HowToHomeDIY]

I also have more than one of these installed. There is no way to sync them perfectly, outside of setting the time on one of them and then timing out a minute and then setting the next one. It probably won't be perfect but it can be darn close. Good luck!

[@raymondcolon4198]

Great help thank you

[@HowToHomeDIY]

You're welcome! Glad it helped. Thanks for the feedback Raymond!

[@TheRockIsHere1982]

Very helpful!! Thank you sir!!

[@christinewidmer1653]

I have out side led lights around my eves I have it on a dimmer switch right now but I also want it on a timer how can this be done and the product I need to buy Please some info

[@HowToHomeDIY]

In order to be on a timer and a dimmer, you would probably need to buy a smart switch that can be programmed on your phone.

[@tudo8412]

Great Video…Thank you so much 👍

[@HowToHomeDIY]

You are welcome! Glad you liked it!

[@SignorLuigi]

I believe this switch is the same as the GE SunSmart digital switch. Same hardware and design, same functionality. The only difference I can see is that the Defiant model sells for about $10 less than the GE unit. Also, I'm not sure if it was clear how to determine which black wire is line and which is load. The black LINE wire is HOT when tested with a multimeter. The black LOAD wire is NOT HOT. Of course, this is before you turn off the circuit breaker.

[@stevenordstedt2535]

Is the load wire the power?

[@HowToHomeDIY]

The load wire is the wire going from the switch to the light or whatever you are wanting to power so it only sends power when the switch is on. The line is the wire supplying power all of the time from the panel.

[@johnfrederick6152]

Is the switch rated for outdoor use too?

[@HowToHomeDIY]

This particular one is rated for indoor only.

[@thegeneral5716]

Thank you for that very detailed and easy to follow instructions.

[@KDMeowmmy]

Super video!

[@HowToHomeDIY]

Thank you very much!

[@wayneguy6043]

Will it work if you reversed the line load lines?

[@HowToHomeDIY]

No, the line wire needs to be attached to the line terminal and the load wire to the load terminal. If reversed it just won’t work. I hope this answered your question.

[@HowToHomeDIY]

No it just won’t work until the wires are wired correctly.

[@AsianBlackR3501]

Thank you.

[@ramonstallings1027]

I installed the timer and it works but my lights are very dim and when I push the on and off button, the lights come on really dim. And go off but stays on. I use led lights for my out side lights

[@yelenasandler2358]

If I have a duplex light switch for a hallway and for outside and I want this to control only outside light, does it mean I have to have 2 switches for each light, inside and the outside? Also, the window is not lit up as yours. Do I have to have a switch in ‘on’ position at all times? Someone installed it, I will have to let them know. Many thanks!

[@HowToHomeDIY]

Yes you would need 2 separate switches in that case. If it is not lit up then more than likely the wiring was not done correctly.

[@semmes5342]

Can I wire 3 switches into that timer? In other words can the other 2 switches be wired in with the timer

[@HowToHomeDIY]

Hey, yes you could, but you would want to make sure you don't go over the amperage that the timer switch is rated for. In this case the one in the video is rated for 15 amps so just keep that in mind. Hope this helps!

[@JaguarDieCast]

My old light switch doesn’t have a ground. Is that okay?

[@givergislazar3679]

Thank you

[@HowToHomeDIY]

You're welcome

[@prosperikesinachi6902]

This is so great

[@HowToHomeDIY]

Glad you liked it! Thanks for the feedback!

[@AntonioCastillo-qs9qf]

Awesome video!!

[@HowToHomeDIY]

Hey Antonio, really glad you liked it! Thanks for the feedback!

[@lukewilson2548]

What if it's an older home and there is no neutral wire in the box

[@itsthechad1970]

Question… I installed this. The display comes on and you can program but lights won’t come on. What am I doing wrong? Yes the line is good and the bulbs are good.

[@HowToHomeDIY]

Does the display turn blue?

[@FranciscoAlvarez-ez4jw]

Does it have a back up battery?

[@HowToHomeDIY]

I am not sure if it has an actual battery but I do know that after a power outage, none of the 3 of mine that I have installed, have reset and lost their settings. They have always kept the time and their settings once power was restored. Hope this helps. I assume that is why you were asking.

[@bpearson42]

Great video... Thanks for the assistance. 👍🏻

[@HowToHomeDIY]

Glad it helped! Thanks for the feedback! 👍

[@sarndall]

Thank you so much!!!

[@Ano_Ba_Girl]

Switch only has two wires… will this not work with this unit?

[@doowopuncle]

great video

[@HowToHomeDIY]

Glad you liked it. Thank you for the feedback!