Automatic Water Tank Overflow Control | Pump OFF System | Arduino | ESP32 | Blynk IoT

In this video, we will see how we have set Arduino, ESP32, Ultrasonic Sensor (JSN-SR04T) based automatic water tank overflow control, level monitoring and automatic motor or pump control system using Blynk IoT (internet of things) mobile application in our home.
Coding link for two tanks and one motor is available here:
github.com/hom...
Automatic garden irrigation system for 25 plants using Blynk app, ESP32 board, Blynk local server, Solenoid valve & Relay:
• Automatic Garden Irrig...
How to install Arduino IDE in Windows 10 OS:
• Install Arduino IDE on...
How to install Arduino library in 3 different ways:
• How to Install a Libra...
How to add ESP32 & ESP8266 boards to Arduino IDE:
• Install ESP32 ESP8266 ...
We have used the following components for this project;
Blynk mobile application with local server
ESP32 Dev board
Waterproof Ultrasonic Sensor JSN-SR04T
1-Channel 5V Relay
5V Power Supply
Wires
I have used customized coding for my use case, please share your doubts in the comments section related to coding & this project.
#ESP32 #Blynk #Arduino #IoT #Automation #UltrasonicSensor #Waterproof #TankLevelController #AutomaticWaterLevel #AvoidTankOverflow #AvoidMotorDryRun #JSN-SR04T #Tamil
Fully automatic water tank control system
Fully automated water tank controller
Automatic water level controller
I Need You by LiQWYD / liqwyd
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/3jOruYf
Music promoted by Audio Library • I Need You - LiQWYD (N...
Thanks for watching this video and visiting our channel!
Please subscribe to our "Techie Hobby" "techiehobby" KZbin channel for more videos:
youtube.com/@t...
bit.ly/techieh...

[@techiehobby]

Playlist in our Channel: Travel VLog: kzbin.info/aero/PLHN19ybbdCN1Cc0j1XP7SEO8_9CEY5KMt Hills Ride VLog: kzbin.info/aero/PLHN19ybbdCN34SG5XgAiSX3M9gt2dV3Vg Automation Projects: kzbin.info/aero/PLHN19ybbdCN3L4Fkz9KMKKnn8o6rQXB0M Arduino Tutorials: kzbin.info/aero/PLHN19ybbdCN0SD1QI1fzweegOuF83zT19 Baking, Cooking & Food Recipes: kzbin.info/aero/PLHN19ybbdCN2mN-F_laFkox2zSjJ3U2NC Networking Tutorials: kzbin.info/aero/PLHN19ybbdCN1R4teMCE4aTdwFYjLLAtTS VMware Tutorials: kzbin.info/aero/PLHN19ybbdCN0K2A0dJtwriwq8_PKoIIT0

[@nrk260566]

Ver good

[@techiehobby]

Thanks

[@ArunKumar-rk8we]

Great project, useful for everyone 🙂

[@techiehobby]

Thanks 😊

[@aleokennedy5779]

Great effort Arun 👏👏👏

[@techiehobby]

Thanks 😊 Leo

[@ajayakumarvv3010]

Hi brother , I like to build this project for my home , but I required overhead tank only , no ground tank required , kindly guide me in this matter , advise me for any changes in the circuit . waiting for your reply.

[@Karthikeyan.Jayakumar]

Super arun good work keep it coming

[@techiehobby]

Thank you so much

[@franciscapriya1791]

can u pls simplify using bred board for school project

[@techiehobby]

Yes, sure

[@SanjuManMaharjan]

Can you add OLED Display also? Because it is better with or without internet. If the internet is out of reach, it is not possible to check water levels (must need mobile n internet). Isn't it? Hoping some details video of this project (step by step, wiring with diagram, coding without error, parts components).

[@tusharjambhekar]

Very informative video Arun. Glad if you can share the links to buy online all these components like from Amazon etc.

[@techiehobby]

Sure, I will update the links in the description.

[@adambeedle]

Great project 👍

[@techiehobby]

Thanks 😊

[@gajendranr.c7807]

Great Brother

[@techiehobby]

Thanks 😊

[@gajendranka6323]

bruh isn't that JSN-SR04T has a blind spot of 25 cm? how did you manage that?

[@madhukeshwar3947]

How accurate is it in terms of %? When you close the lid there is condensation, how do you take that into your calculations?

[@techiehobby]

I am getting 100% accurate values after changing 10ms to 20ms and median filter library. Without these 2 techniques, earlier I used to get wrong value and fluctuations. Now that issue is not there.

[@techiehobby]

I have updated the code in the description, please check and let me know if there are any issues.

[@hasandemirdirek2905]

Can this sensor positioned to out of the tank without any hole?

[@techiehobby]

Yeah possible by making the pvc pipe arrangement to support it.

[@tamilpuretech0852]

sir how to set value parameter in blynk app pls

[@techiehobby]

Please email your questions with contact details @[e-mail]

[@tirupurpatel]

DEAR BOR WHERE ESP32 Dev board CODE PROGRAM LIST IN U R DISCRTION ? I WANT MAKE THIS FOR MY USE. GIVE THE DETAILS THANK U.

[@techiehobby]

Sure, I will add the link to the code in the description this weekend.

[@techiehobby]

I have updated the code in the description, please check and let me know if there are any issues.

[@ranjithamkumarasamy9777]

can you provide me for two tank water level indicator using esp8266

[@techiehobby]

Sure, please share your requirements in the below email [e-mail]

[@ranjithamkumarasamy9777]

@@techiehobby i sent the requirements to email

[@techiehobby]

I have updated the code in the description, please check and let me know if there are any issues.

[@ranjithamkumarasamy9777]

@@techiehobby how to set up blynk app for two tank

[@techiehobby]

Are you using local Blynk server or cloud Blynk server? Do you want support on adding the buttons, other widgets?

[@jeevanantham_s]

Very nice work... 👏 I need some clarification about your project.. How can I contact you bro....

[@techiehobby]

[e-mail]

[@gajendranr.c7807]

Brother. How long wire we can use from tank to control room ?

[@techiehobby]

Keep the ultrasonic sensor pcb board near to tank, because ultrasonic probe has 2m wire only.

[@gajendranr.c7807]

@@techiehobby Thanks Brother

[@gajendranr.c7807]

@@techiehobby Brother. How long wire we can use from "ultrasonic sensor pcb board" to "control room" ? How long you Used that wire from "ultrasonic sensor pcb board" to "control room" of this Project.

[@techiehobby]

I have used more than 30m from esp control board to ultrasonic pcb board. 4 wires - 5v, gnd, trigger, echo wires

[@gajendranr.c7807]

@@techiehobby Thank you for valuable answer Brother

[@NareshKumar-gk9lz]

I like your project. How far is your tank from the control board? I want to control the microcontroller and sensor from the ground floor to the 3rd floor. Are there any issues if the sensor pin wires are too long from the control board?

[@techiehobby]

Thank you that you liked our project. To answer your question: Tank is in 2nd floor and control board is in ground floor portico section. Distance is more, if we use proper gauge wires then there won’t be any issues.

[@NareshKumar-gk9lz]

@@techiehobby May I know the size of your gauge wire that you were used for this project?

[@techiehobby]

I initially had problems with thin aluminum wires, but later I replaced them with good-quality copper wires, which solved the problem. I am not sure about the gauge size.

[@creativeelectronicchannel7647]

Pls make this video blynk configuration of this project

[@techiehobby]

Do you want to see blynk app step by step configuration of each widget?

[@creativeelectronicchannel7647]

@@techiehobby yes bro pls make it for me

[@techiehobby]

Sure, I will upload it soon.

[@creativeelectronicchannel7647]

@@techiehobby ok bro thank you bro

[@creativeelectronicchannel7647]

Bro I make this water tank level indicator but tank full it notify me tank full notification but it is continuously notify to me irritating I want only 2 or 3 time message notifying me me how to set that function

[@AnwarHossain-ge8xq]

please make a new video for new blynk app

[@techiehobby]

Sure, will post it soon...

[@muhammadzaini1227]

I have trouble with my another sensor

[@techiehobby]

How can I help you?

[@muhammadzaini1227]

First sensor is working normally, but second sensor error, its stuck 23 cm

[@techiehobby]

Blind space is 20 to 25 cm, so keep your sensor 25 cm away from the object.

[@suheniachinthyamalawige5461]

Hi there could you please let me have the code and the schematic?

[@techiehobby]

Thanks for watching, circuit diagram is available in the video. As I mentioned, this project is used for automatic tank and automatic 25 plants irrigation. So there is 2000 lines of coding in ESP32 and 200 lines of coding in Arduino mega2560. Please email us your requirement and we will share the coding for your use case.

[@techiehobby]

kzbin.info/www/bejne/iGG5cputocaohNE This video is automatic irrigation for 25 plants using same components.

[@techiehobby]

I have updated the code in the description, please check and let me know if there are any issues.

[@shandradm911]

working with new blynk?

[@techiehobby]

This video is based on old Blynk. We need to modify the code slightly for new Blynk.

[@ibrahimhamid8129]

do you have code for new blynk

[@techiehobby]

Yeah I have

[@AmitJyoti_Vlog]

Can u please share code of this program

[@techiehobby]

Sure, i will add in the description next week.

[@techiehobby]

I have updated the code in the description, please check and let me know if there are any issues.

[@makeiteasy612]

gg how to mack blynk cod. pls expline

[@techiehobby]

Code link is available in the description

[@makeiteasy612]

Home MKR build method gg

[@techiehobby]

Sure, will upload new video for tank monitoring alone in few days.

[@mrandhir]

Hi Arun, Sent an email please respond 🙂

[@techiehobby]

Okay 👍

[@karuvarakkalsidharth1133]

Bro i have send you a mail regarding this project please do check... Name is karuvarakkal Sidharth

[@techiehobby]

I have checked your email and replied.

[@vandanasinghvlogs1770]

Please share code

[@techiehobby]

Sure, please email us.

[@sasageo2723]

can you send the code please

[@techiehobby]

Sure, will upload the code in the description. Due to health issues, no able to add it on time.

[@techiehobby]

I have updated the code in the description, please check and let me know if there are any issues.

[@047karunakaran.m3]

​@@techiehobby Code has error

[@rojitjohncy6150]

Bro, have sent you an email for help. Could you please check and respond when you are free. Thanks in advance!

[@techiehobby]

Thanks for your message, I just replied to your email.

[@veriteprogramming5369]

Thanks for sharing your knowledge.. Great work.. Can i have your email our mobile id to contact.. As i have some doubts.. Thanks for helping

[@techiehobby]

Sure, please email to [e-mail]

[@veriteprogramming5369]

@@techiehobby thanks..Will contact soon

[@techiehobby]

I have updated the code in the description, please check and let me know if there are any issues.

[@TechTamilIOT]

@@techiehobby i have some boubt

[@techiehobby]

Please email me [e-mail] your phone number, I will contact you.

[@paragjambhekar]

hats up to you arun. I will contact on u r mail id

[@techiehobby]

Sure, thanks for watching and supporting