Smart Irrigation Using Blynk 2.0 | Control Water Pump Using Blynk 2.0 | Home Automation | Blynk 2.0

Smart Irrigation Using Blynk 2.0 | Control Water Pump Using Blynk 2.0 | Home Automation | Blynk 2.0 Projects
Required Components
==================
1. NodeMCU
2. Relay
3. DC Water Pump
Components Link
===============
1. NodeMCU - robu.in/produc...
2. Relay - robu.in/produc...
3. DC Water Pump - robu.in/produc...
4. Connecting Wires - robu.in/produc...
Software Required
===============
1. Arduino IDE - www.arduino.cc...
2. Programming Language - C Language
Source Code
===========
github.com/Tec...
Reference Video of Arduino Experiments
======================================
1. Control LED using Arduino IOT Cloud and ESP8266 | Arduino IOT Cloud Projects
• Control LED using Ardu...
2. Control LED using Blynk 2.0/Blynk IOT using Simple Program | Blynk 2.0 Projects | Node MCU Projects
• Control LED using Blyn...
3. Temperature and Humidity Monitor using Arduino IOT Cloud and ESP8266
• Temperature and Humidi...
4. How to Display Current Date and Time in LCD
• How to Display Current...
5. Top 10 Arduino GSM module projects
• Top 10 Arduino GSM mod...
6. How to interface MPU6050 Accelerometer and Gyroscope Sensor with Arduino Nano
• How to interface MPU60...
7. How to store Temperature data in Google Spreadsheet
• How to store Temperatu...
8. How to Display Temperature, Pressure, Altitude Display in LCD
• Temperature, Pressure,...
9. Rain Alert Call and SMS in Mobile using GSM SIM 800 Module | Arduino Projects
• Rain Alert Call and SM...
10. Live Streaming using ESP32 CAM and Blynk App
• Live Streaming using E...
11. How to store temperature data in SD card | Arduino Projects
• How to store temperatu...
12. Object Detection Alert Call and SMS in Mobile using GSM SIM 800 Module | Arduino Projects
• Object Detection Alert...
13. Distance Measurement in OLED Display
• Distance Measurement i...
14. ESP32 Cam Setup | Face Detection | WiFi Camera
• ESP32 Cam Setup | Face...
15. Temperature Display in OLED | Arduino Projects
• Temperature Display in...
16. How to get the Temperature Alert Call and SMS in Mobile using GSM SIM 800 Module | Arduino Projects
• How to get the Tempera...
17. How to get the Theft Alert Call and SMS in Mobile using GSM SIM 800 Module | Arduino Projects
• How to get the Theft A...
18. How to get Gas Leakage Alert Call and SMS | Arduino Projects
• How to get Gas Leakage...
19. How to get Fire Alert Call and SMS in Mobile
• How to get Fire Alert ...
20. Control LED by Phone Call
• How to Control LED by ...
Music: www.bensound.com
♥ Facebook: / techtrendsshameer
♥ Instagram: / tech_trends_shameer

[@gameshi123]

Thank you for the video.... I was able to complete my project because of your Video 😃😃

[@TechTrendsShameer]

Great. Thank you. Keep supporting

[@fouadmadridi3662]

What did I do I couldn't complete it with blynk despite all the methods like the video

[@lou5400]

it works great thank you so much sir, bless you

[@TechTrendsShameer]

Thank you

[@user-pg3eh4zf5g]

Once we dump the code the motor keeps on running continuously and i am unable to controll it through blynk app whats the problem please help

[@sphoorthi557]

Same problem

[@sreejayanthn7894]

thank you so much...it helped me a lot

[@TechTrendsShameer]

Glad it helped!. Please subscribe.

[@thetechlife1253]

Does it work over the mobile data for long distance controlling? Or on only wifi network at home?

[@PWfanpage357]

Sir , i want to just connect it with normal black relay not the relay module, what should i do please help me sir i have my school project on 2 January

[@sandhyabiradar8509]

I have made the same connection as you shown into the video but whenever I switch on and off from blynk app it does not effect the motor ..?how can it possible.. I have tried so many ways ..but it is not controlling the motor

[@TechTrendsShameer]

Instead of pump, can you please try with an LED and do the same steps and make sure it is working fine. Then replace with the water pump. It would be easy to find the problem

[@shubhamsaptasagare7957]

PROJECT is very Good 👍 Suppose if I use ac motor(18w) then sir what changes we have to make ? Please guide me sir !

[@TechTrendsShameer]

You need to use relay. Please refer this project and replace the bulb with the A.C Motor kzbin.info/www/bejne/aKPZfqt7ZtF5i5I Please be careful while using A.C devices and relay.

[@shubhamsaptasagare7957]

@@TechTrendsShameer Thank you sir. I have one doubt that 9v battery is compulsory ? I not have bread board. So what I do know?

[@TechTrendsShameer]

@@shubhamsaptasagare7957 9v is not compulsory. My board is not supporting with DC supply from laptop. So I used 9V battery. If your board support, then no need

[@shubhamsaptasagare7957]

@@TechTrendsShameer can I connect directly all wires with each other ? Because I does not have breadboard. Please Guide me sir !

[@TechTrendsShameer]

Yes you can. Follow the circuit and connect the wires

[@Dean.Michael.Winchester]

Just wondering if this will work if we use the power from USB instead of the battery

[@TechTrendsShameer]

Yes it will work. But my board is not supporting the power from USB. Please give a try.

[@ZARDYT_OFFICIAL]

Sir can you give me its circuit diagram

[@TechTrendsShameer]

Please message me in Instagram

[@prernakhambhayata5537]

Your video is very good but when i click off motor is should stop working but it's still working continuously can solve my issue why this is happening

[@TechTrendsShameer]

Check the relay

[@prernakhambhayata5537]

@@TechTrendsShameer i have checked relay it's 5 volt relay and working fine I have checked output and input voltage through the multimeter

[@TechTrendsShameer]

Ok

[@c.s.naveenelectroniclab5330]

We can use normal relay module (single channel) is blue colour😊

[@TechTrendsShameer]

Yes you can

[@arenmosadmustafa3106]

Hello I did the project but it doesn't work on the battery only the usb

[@AmicoKuwait]

Hello Shameer, i have to monitor and maintain water level in a tank and i want to log those datas. Also based the on the water level datas the controller should trigger the pump to maintain the particular water level. Do you have any suggestions please..

[@TechTrendsShameer]

Yes. We can do that. Let me think how we can do.

[@manishkulkarni3128]

how to control dc motor (FWD, REV, LEFT, RIGHT)using blink app can you please make a video on it or can you give me some ideas

[@TechTrendsShameer]

I will make a video and let you know.

[@wondelfworld8149]

Hye, may I know, does that 9V battery can support two water pump and with adding another sensor which is TDS sensor?

[@TechTrendsShameer]

I don't think so bro. But just give a try.

[@mritunjaykumar1356]

Can we use l298n instead of relay module?

[@muhammadbinhairolnizam7929]

hi just wondering can you make the pump automatic. So if water level is less than 30%, pump will on. If water level is 70%, pump is off.

[@hackerjindahai6221]

Thank u

[@TechTrendsShameer]

Welcome. Please subscribe.

[@tasrifajannat8421]

I did the same thing you've shown in the video. But my pump start automatically when I give it connection with the relay module. [Pump's positive to relay common and battery positive to relay NO]. And the blynk app's switch does not work

[@TechTrendsShameer]

May I know the type of relay you are using?

[@tasrifajannat8421]

@@TechTrendsShameer JQC3F-5VDC

[@TechTrendsShameer]

Please send the photo of the relay to me in Instagram

[@rijuthaa2207]

@@TechTrendsShameer the same thing is happening to me as well...what should i do ?

[@muhammadramadanicikalanand6937]

sorry for bothering, i wonder if you found any solution regarding this problem, same thing happen to me too

[@abhinavrathi9369]

it is saying that Compilation error: 'Blynk' was not declared in this scope

[@TechTrendsShameer]

Please install the Blynk Library

[@Annuriman123]

may i know how to add library for esp32

[@TechTrendsShameer]

1. Please go to File -> Preferences and copy the below URL raw.githubusercontent.com/espressif/arduino-esp32/gh-pages/package_esp32_index.json 2. Then go to Tools -> Board -> Boards Manager and install ESP32 Board.

[@Annuriman123]

@@TechTrendsShameer thankyouu!!

[@Annuriman123]

@@TechTrendsShameer why the coding 'D4' was not declared in this scope; did you mean 'V4'?

[@TechTrendsShameer]

@@Annuriman123 Its declared in the code. please check.

[@bhandary4531]

Sir can u put in the description about how the this project works (in 100 words)plzzz sir

[@abhinavrathi9369]

and codes are uploaded but no light in rellay and no response from motor

[@TechTrendsShameer]

Please recheck the circuit connection

[@muhsinbinalwi1079]

hi, how to make the blynk online? I already follow the steps but it is only show offline.

[@TechTrendsShameer]

Please check the circuit connection and the wifi.

[@purplegirl6103]

Sir I’m using ESP32 GPIO 27 and 16 pins so what should I give as the data stream

[@chinku2679]

Can we add soil moisture and dht11 sensor with it !

[@TechTrendsShameer]

Yes you can. Need to modify the code

[@subhasishdutta5628]

Make a project where dht11 and soil mosture sensor and esp 8266e connected together and with a dc water motor and we can control the water pump from a local wifi webserver and monitor everything from the webpage

[@princetk1977]

Can i set timer in this project like 6 a.m automatic on the pump

[@TechTrendsShameer]

yes you can.

[@princetk1977]

@@TechTrendsShameer how??

[@sivakishore7603]

My project is done...but motor is not controlled..why sir can you give solution

[@TechTrendsShameer]

Please check the circuit connection and power supply

[@GameRider805]

getting error , D4 was not declared in this scope , did u mean v4 ?? how to fix

[@TechTrendsShameer]

Its D4. Its already declared in the program. Can you please check whether your template id and auth token is correct?

[@GameRider805]

@@TechTrendsShameer nvm .. I figured it out .. i used 2 instead of d4 ...

[@TechTrendsShameer]

@@GameRider805 Great ❤

[@deanardiyanto1670]

Mine blynks off but the water pump stays on?

[@deanardiyanto1670]

can you give me more info

[@madhurinarlapati7698]

Can we use Arduino Uno insted of Arduino nano

[@TechTrendsShameer]

If you are using with Blynk then you need NodeMCU Board either ESP8266 or ES32

[@andreabeaquirante425]

My relay has vcc, gnd and in. Can I use this?

[@TechTrendsShameer]

Yes. You can use.

[@andreabeaquirante425]

​@@TechTrendsShameer how can I indicate which is the positive, negative and signal from the vcc, gnd and in?

[@andreabeaquirante425]

​@@TechTrendsShameercan I have your Instagram username sir? Only if it's okay so that I could ask some questions. Thank you!

[@TechTrendsShameer]

VCC - positive GND - Negative

[@TechTrendsShameer]

instagram.com/tech_trends_shameer/

[@fouadmadridi3662]

Can you put on an electric chart?

[@TechTrendsShameer]

You mean add a chart in blynk app ?

[@Telugu_wala]

Bro what about code I want code to paste the authentic after saving

[@TechTrendsShameer]

Code is in video description.

[@edmundgubalane1105]

Please make this using arduinodriod an Android app pls🙏

[@TechTrendsShameer]

Sure. Will try.

[@yugahasini15]

Sir how can i get the circuit diagram??

[@TechTrendsShameer]

Its in the video. Please watch full video.

[@mohammedsadiqahmad2886]

hi can I open this ip from another network, if I was away from home

[@TechTrendsShameer]

For this project, you no need any IP

[@mohammedsadiqahmad2886]

@@TechTrendsShameer sorry sir, can you tell me, can I open this app from another network and control this switch from away?

[@TechTrendsShameer]

@@mohammedsadiqahmad2886 yes. You can

[@mohammedsadiqahmad2886]

@@TechTrendsShameer Ok sir, I will do this project and I will see, will it success? Thank you

[@TechTrendsShameer]

@@mohammedsadiqahmad2886 ok

[@analentoco5104]

Can you share code sir...paste on this comment

[@TechTrendsShameer]

github.com/Tech-Trends-Shameer/Blynk-2.0-Projects/tree/main/Smart-Irrigation-Using-Blynk-2.0

[@edmundgubalane1105]

Can i use that code in arduinodroid an Android app?

[@TechTrendsShameer]

Yes. You can use.

[@edmundgubalane1105]

Thanks! I can't open your source code? Can you give me a copy?

[@TechTrendsShameer]

@@edmundgubalane1105 github.com/Tech-Trends-Shameer/Esp-8266-Projects/tree/main/Smart-Irrigation-Using-Blynk-IOT

[@mindgamessoftwaredevelopme7726]

can I connect this without board

[@TechTrendsShameer]

you mean without nodemcu board? that is not possible

[@mindgamessoftwaredevelopme7726]

@@TechTrendsShameer I mean bread board

[@TechTrendsShameer]

@@mindgamessoftwaredevelopme7726 Yes. You can. But you need to do some soldering if the connections are using the common pin.

[@learnspeak3312]

Arduino code sir plz

[@TechTrendsShameer]

Please check video description.

[@mueezsaeedchishti3739]

not working help pls

[@TechTrendsShameer]

What is the error?

[@adis7081]

I need the circuit diagram

[@TechTrendsShameer]

Circuit diagram is included in the video. Please check the full video.

[@fouadmadridi3662]

Do all the ways, Blynk wouldn't work

[@TechTrendsShameer]

Are you getting any error message?

[@fouadmadridi3662]

No٫Although I'm Blynk contact