i did. i dropped the pan again, and disconnected and reconnected all the electronic connections, making sure they were all connected properly. then i turned the key on and selected reverse, neutral, and drive. i slid the shiftlever over and was able to upshift the transmission manually from 1st to 2nd. At that point i was reasonably sure that i had corrected my issue. i put the pan back on, filled the transmission back up with atf, and testdrove the car. It shifted perfectly. Praise the LORD!
@Jrgruter659 жыл бұрын
Hi Hiram, first time I'm writing a comment on your videos. Just want to thank you for all the things you have done on educating people with your knowledge on the automotive industry. You are really confident on what you do an I can feel the passion you have for what you do. Thanks again!!!
@CleverOwl-t8j Жыл бұрын
This guy is seriously one of the best transmission rebuild KZbinrs I've found.
@patrickwarden2933 Жыл бұрын
i wish you showed a lil more on solenoids and explained more. I did shift kit and new solenoids and fixed the issues. runs smooth now
@nassermotamed83789 жыл бұрын
you are really perfect one ,,,very well you explain every things ,,,thanks Hiram ...I have all your clips and watched them so many times ,,,,,I have to say your explanation is like some jewelry for me ,,,,,you are perfect
@mkl3opt11 жыл бұрын
No One can do a job like you do - well done!
@peten64456 жыл бұрын
Wow, I do not know how you remember everything.
@nassermotamed83789 жыл бұрын
that is much much better .............only problem, when is warmed (after 10 minutes driving)the 2nd gear is bumping , most of the time for downshifting 3rd to 2nd ,otherwise that is ok and that is quite better after repairing valve body as you explained on your clip. thanks a lot and apologize for my bad English.
@hybridorbital856 жыл бұрын
Just wanted to thank you for a great video. Most comprehensive one yet. BTW, this is the same transmission as the Mini Cooper and Clubman R55 and R56. I'll be doing this exact thing very soon as mine is shift hunting from 3-4 gears and shifting hard. Lifetime fluid MY A$$!
@maxim852112 жыл бұрын
Thanks to you! Very much to me helped! Hello from Moscow:)
@Василийвеселый-з8я8 жыл бұрын
хоть в английском совсем не силен,но видео реально помогло понять некоторые детали
@dawidsharif99576 жыл бұрын
Thank you very much , Mr.Hiram I fix my valve.
@gustavohernandez82006 жыл бұрын
im taking this as a project for the next few days ! wish me good luck lol
@imquattro9 жыл бұрын
Thanks for the video! How did you cap the solenoids after assembly? I see the caps in the kit, do they just press fit on or did you use any sealer or thread locker? Thanks!
@andybrown69812 жыл бұрын
Good question. Any answer?
@ronaldgiron26339 жыл бұрын
Great video and very tutorial keep it coming bro. Thanks
@justinellisii2326 жыл бұрын
Hello Hiram, I realize your busy and I hate to bother you. If you can tell your audience the torque specs for the valve body bolts we would appreciate it. Alldata says 8 - 11Nm plus an additional 1/4 turn (90°) . ATSG manual says 8-11 Nm . read online 20)Ft.LBS. what do you recommend?
@JohnThorpIreland3 жыл бұрын
Hi, Hiram, amazing videos. Can I ask what the torque is on the 09G Valve Body TransGo Shift Kit Intall
@cassieknight91299 жыл бұрын
This is an excellent video! Thank you very much
@javiermartinez55188 жыл бұрын
great video brother keep up the good work keep them rolling.
@realitycheque65297 жыл бұрын
Wow. You clearly have done this before!
@420fmlbro916 жыл бұрын
Just so you know, WD-40 is a solvent, not a lubricant. In other words- don’t use WD-40 on your valve body unless you clean it all off before reinstalling it on the transmission.
@phillipvaldez17795 жыл бұрын
Hello Hiram, I really enjoy all your videos and helpful hints on rebuilding the 09g valve body. I have a 2005 Mini Cooper S. I purchased the TransGo shift kit from our local transmission parts store,in Kansas city, MO. Ive been an auto technician for 31 years. Mainly Engine performance. I have a problem, with my valve body.I'm sure it would be pretty remedial for you. Unfortunately, not for me... I'm scared of it now. my question to you is are you familiar, of any reputable "09g" person I can ask for help. I will ship the valve body if necessary. thank you
@macthompson81925 жыл бұрын
Is this the best bet when trying to fix a jerky/harsh shifting transmission or should i shell out the extra cash to just buy a new set of solenoids?
@jonathanholm63119 жыл бұрын
It would be great to see how you put the valve body in. Is it very difficult? I am thinking about changing out the valve body in my daughters 2005 2.5 Jetta.
@tradarrrecords3 жыл бұрын
Great video. I am going to try doing this. Here goes nothing.
@popoqwer11 жыл бұрын
after you cutoff the solenoid end and put the metal cap on... How does the metal cap stay fixed? thanks.
@andrewbaynham67317 жыл бұрын
Hi all, my beetle with this gearbox has difficulty changing gear when its hot but perfect when cold is this a solenoid problem ... do they need servicing like on the video.. love the videos what great knowledge ...
@juanceballos84237 жыл бұрын
Thanks for the video !! it help me a lot
@rubenrivera19329 жыл бұрын
gr8 video is the valve body on this video the same as the one used on a 2003 vw beetle 2.0L
@hoonstan19 жыл бұрын
Hi Haram great video just wondering how different is the 2003 V^ Touareg transmission from the one in your video.? others are showing the vcalve body removed from the touareg without removing the transmission. Transgo say the same. i have the commonly reported problem of 5th down to 4th bad clunk which it seems are caused by the valve body. What do you think. Cheers mike from Aus
@kmuschamp764811 жыл бұрын
I have a 2005 beetle with the 09G trans. It use to shift hard when warm while driving. From a stop when warm when shifting from Park to Drive it would shift very hard also. Would the trans-go shift repair kit help. Your videos are great! You should have a tech-line!
@SrBugDj11 жыл бұрын
Great Video , you pointed the solenoids backwards at the end, also N282 not N228, N88 & N89 were pointed backwards too. whats the difference in shifting after this kit is done if there were no shift issues to start with? Thank You for sharing your knowledge .
@jimbuford41479 жыл бұрын
Hiram, why were you enlarging some of the holes? Is that what the shift kit you purchased called for? Thanks, good video.
@djjoep1008 жыл бұрын
hi when do you know when you have to do a valve body transgo shift kit install. I do all the work my self but not the valve body I just did my atf and runs good I do my tune up every year thank you for the help
@fhengpasaway10 жыл бұрын
how do you put end caps on solenoid,and where can i order that?
@johnlucas89782 жыл бұрын
Very good presentation. My 09G problem (2007 Rabbit 2.5L 6 speed auto) is a loud clunk and can feel a jerking, when up and downshifting between 1-2, only happens when transmission hot after driving about 20-30 mi. Higher gears seem to be fine. I am guessing that it is a sticky solenoid valve but not sure which one or if a combination of solenoids. Any suggestions would be greet.
@Mrsolomatov10 жыл бұрын
Hello! Thank's for video. I own VW Jetta 2005, 2.5l. And i have hard shifting between 1st and 2nd gear, and it's doesn't matter if the engine is hot or cold. So, will this kit help me? I can not take apart all the transmission, but i can do this kit with my valve body. Thank you!
@newhogwartsprofessor8 жыл бұрын
WOW! This is so clear and well done. I learned a lot and am now considering trying the valve body replacement/rebuild before I try a new transmission. My big worry is damaging the electrical connections and causing more problems. QUESTION - how did you get the new caps mated the solenoids? Did it involve a press?
@Noel1276 жыл бұрын
wanda rodriguez the cables can be replaced. Order a new set if you're worried about breaking it.
@Oden2u8 жыл бұрын
Hiram, Im just about to take the valve body out of my sons 2007 Rabbit to do the Transgo job.. Are they any tips and tricks and precautions for removing the electrical connectors...I dont want to break them Many Thanks
@josueharo84698 жыл бұрын
buen video hiram, una pregunta los cuerpos de valvula de la VW TIGUAN que tiene el mismo cuerpo de valvulas pero con solenoid cans mas pequeños tambien se les da servicio a estos? de antemano agradeseria tu respuesta saludos gracias...
@stephensirengo84959 жыл бұрын
Thanks for the good videos Hiram Gutierrez. i have i vw golf plus fsi 2005 it has rough change of gears when it warms up epecially 2nd and 3rd and when going down gears....when you put it into drive and reverse it really shakes ...last month was driving for a long distance the PRNDS light came on, i packed the car for a few minutes then when i started again the light had gone..changed the ATF but the problem persists...could the valve body have issues? please reply
@josemoca69677 жыл бұрын
H Hiram, excellent explanation & Material, how much torque do you apply on the bolts on the final assembly?, thanks
@pedrocarloscastillo14852 жыл бұрын
Muchas gracias jefe
@emmanuelenriquez48724 жыл бұрын
Currently have my valve body removed, and was ready to replace it with the valve body I ordered but USPS broke it some how 😑😑 so now I'm not trying to wait another 5 weeks to get another for 350$ and easy wondering how much a rebuild would be or would I be better off waiting for ever for a new one? Apreciate it
@Clrwatrtom11 жыл бұрын
thanks Hiram, great video. i would have liked to see you install the vb on the trans housing though. i'm changing out a vb on my 03 TT this afternoon and i was curious about the 2 springs and shock absorber piston. i will be installing it in the car and i was hoping for any tips you might have. Thanks, tom
@rickrod83583 жыл бұрын
what affect does transgo kit have on the shifting of the transmission is firm or shortyer gear shit over lap. Thanh PS great video
@ssrello11 жыл бұрын
Hi Hiram. Great videos
@noelreyes69004 жыл бұрын
Question why dint you just open it up upgrade the bushings . second youre just checking for ohms how about pressure test ? Is it holding its pressure ?
@laohantun74048 жыл бұрын
Thanks buddy, I dare to buy used VWs....now.
@demon345058 жыл бұрын
What you need to install new solenoids? You need special equipment to insert the coils with the unit?
@nassermotamed83789 жыл бұрын
thanks again ,,,,,,,,,,,,,,,,,,why you are enlarging those holes?why are you changing only one of those valves (ATSG says that you have to change 3 valves)? by the way I have done today exactly as you said so tomorrow I am going to test that (that is 09K trans. for VW transporter )how can I get more explanation about that job. you are perfect one ,,,,,,,,,,,,,,,,thanks
@mzperiksz7711 жыл бұрын
What if my reading on all the solenoids are 10 Ohms? All meaning all of the solenoids including the last two as well. Just for the record this is a 04 Beetle 2.0 4cyl. 6 speed automatic transmission.
@Mekanico4x410 жыл бұрын
grasias por el video hiram me ayudo mucho.
@tonytrilex25556 жыл бұрын
Wouldn't it be better to check the resistance solenoids outside of the valve body?
@jedediahbc2 жыл бұрын
I've got a 2008 vw rabbit and the trans is slipping want even move what do you suggest please?
@dp-ho6kf10 жыл бұрын
how do you put end caps on soleniod? you need little press?
@gregroles69 Жыл бұрын
FYI I saw "90" on his torque wrench at 23:29. That will be 90 inch pounds or 10.2nm, which isn't that tight.
@Clrwatrtom11 жыл бұрын
Hi Hiram, i got my valve body installed and your videos were a great help. Unfortunately, now i have a P0798 pressure control solenoid DTC. i installed a valve body i bought from a company in North Carolina called Revmax. my installation went well but i'm not sure what i did wrong.The transmission will let me select park and reverse, but when i put in drive, the transmission selects 5th gear.Any suggestions you might have would be b greatly appreciated. Thanks and God Bless! tom
@daviddowney3122 Жыл бұрын
I have this valve body that some one removed the solenoids there are six all have black connectors and one gray connector how do I know where to put them in corectly im lost only one of them look different at the top please help
@peps_views38109 жыл бұрын
Hi, I have 2005 jetta and done the shift kit install following this video bc of transmission issues that I have. This kit helped but I am still getting hard shifting when the car has been running for thirty minutes or more. My next steps are to reset the transmission control module and with some researh I have gotten to think that it could be the transmission temp sensor. Any comments or suggestion would greatly help. Thanks for your videos
@atikovi13 жыл бұрын
These valve bodies are known for wearing out the internal bores, so this kit which addresses the solenoids, won't help much there.
@dksob19818 жыл бұрын
What problem were you having that lead you to rebuilding the Valve Body? I have a 2006 Beetle that I am working on now. After it warms up, about 10 miles, it has a shudder/harsh shift into 3rd gear.
@dksob19818 жыл бұрын
+Nigel Loller I replaced the entire valve body (with a remanufactured unit) and it took care of the issue.
@MyTigre779 жыл бұрын
Hi Hiram I have a 02 jetta automatic 2.0 it shifts hard goin into 2nd, all other gears are good. Should I do a oil drain n fill before anything else it only has 124000 miles on it, im thinking its low on fluid? Thank you
@LynxStarAuto10 жыл бұрын
Hiriam why did you enlarge the port on the valve body gasket? I did a similar job on this same unit, but did not perform that procedure.
@верамелещук8 жыл бұрын
спасибо.очень хорошее видео. Thanks.
@demon345058 жыл бұрын
Зачем он отверстия сверлил в прокладке?
@cameoforestine719710 жыл бұрын
wow you are a boss
@elcolin_2 жыл бұрын
Did this improve performance or make any difference at all?
@MrCcrespo889 жыл бұрын
Ok I have a mk5 jetta 2.5l non dsg... I have the g195 output speed sensor and I know I have to take out the tranny pan and it's somewhere in the valve body... my issue is I removed all bolts and it hasn't popped off
@vicentevalle40729 жыл бұрын
Hello from México!! I like your video!! I have a question? You have a kit of reparation for valve solenoid 090 for tiptronic transmison jetta sport 2013? Or you have a solenoid valve, and you can send the valve or the kit for reparation to México? Thanks!!!
@3kingkool11 жыл бұрын
Nice meter.
@franciscocasarez474910 жыл бұрын
What problems this shift kit prevents or fix i would like to know Thanks
@demon345058 жыл бұрын
Why the holes in the strip drill?
@joecote52617 жыл бұрын
I lost a piece in the valve body called the lube limit valve. Where can I buy this part?
@geojor9 жыл бұрын
thank you...
@kellyspeppers9 жыл бұрын
Hi Haram very good video. I have a question about the Primary Pressure Regulator Boost Valve Sleeve. What do you find is the normal setting on a valve body that is used in a Jetta 2.5L? Edit: I took a before disassembly photo of the valve body. Using that photo I found that the boost valve sleeve was set to the middle step of 5 possible positions. Giving two steps lower or two steps higher possible for adjustments.After installing the TransGo kit and setting transmission to basic default values with VAG COM, the 09G is back shifting great! For the DIY people, you must reset the 09G back to Basic Setting. If you don't the transmission will not shift good with all the bad learned settings.
@rik88110 жыл бұрын
I have a 2004 Porsche Cayenne, will this work same way for my valve body?
@themagarmuch11 жыл бұрын
Did you ever solve the P0798 code, if yes how did you manage this? I also have a 03 TT with hard shifting problems, thinking of replacing the VB. But now I am not sure I want to do this bacause of the P0798 code you mention.
@jorgealejandre62929 жыл бұрын
Hey buddy I see you do great work. Where's your shop located I need a transmission rebuilt or will like to buy one from you plz get back at me thanks vato
@cisco188fr9 жыл бұрын
hi i just wanted to know can you clean the solenoids with carb cleaner or just the drill bit
@edussabe4 жыл бұрын
limpeza do corpo de vaulvulas vw 010 tem video? SE TIVER BOTA AI NO CANAL.
@galebyassin162410 жыл бұрын
thank you for this video . i dont understand why do you make enlargment of the bores ???
@bobbiewheeler208111 жыл бұрын
i recently rebuilt the 09g transmission, the reverse clutch pack was destroyed ant the front pump was bad. completly rebuilt transmission. installed reman valve body and the transmission engages reverse hard and when it shifts mainly 2nd to 3rd it revs up and then goes in gear. and sometimes on all other gears real rough hard supshift and down shift. please help. o I used global transmission fluid, im flushing it out and seems to still do the same thing.
@scottderuyter38125 жыл бұрын
Is brake cleaner the best for getting the parts clean??
@asaphmdza11 жыл бұрын
Hello Hiram, your explanation is so helpful. Bro I really need your help. My friend's dad is a mechanic working with 09G transmission for years, the point is that he knows how to clean the solenoids and make the change and repair the valve body using the TransGo pieces. But he always have a problem with the second gear, when the car starts and wants to pass from 1st to 2nd it's kinda forced and we don't know why. I wonder if you know which is/are the solenoid valve that make works the 2nd gear..
@Noel1276 жыл бұрын
Alonso Mendoza when this happens the solenoid needs to be adjusted in increments of 1.5 turns. The mechanic will have to gradually adjust to fine tune the shift point.
@abdelmouh49765 жыл бұрын
Hi, It's verry good job Any thinks for you
@nathansmith181012 жыл бұрын
Great video! I bought my daughter an '03 beetle with 09G that shifts very hard when it warms up, but OK when cold. 125K miles. Two questions: (1) would a valve body rebuild fix the hard when warm shifting? (2) Can valve body be removed with tranny in car? Thanks!
@shockerc094 жыл бұрын
Yes you can remove VB from beneath car. You have good access after removing trans fluid pan.
@tcautossteve9 жыл бұрын
Hi if its a valve body solinoid issue i have, would it register a fault code. Mine will reverse but when in drive you have to rev it hard then it goes slow like its stuck in a high gear. I fitted a new k1 clutch just in case.
@tenerifesonia10 жыл бұрын
can you please post the valve body torque settings please. great video
@fhengpasaway10 жыл бұрын
8Nm + 90degree
@AlejandroMartinez-lq9oi10 жыл бұрын
hi Hiram i have a question about a honda civic B4RA ,it has no reverse, what cut it be a possible cause .Iit,works perfectly in Drive but i can make work it in reverse.
@MrSteved100011 жыл бұрын
I have the 6F21WA out of a 2006 mini cooper. The car drives for about 10 minutes and then acts like its in neutral. I don't mind diving into this, i just wonder if it could be VB or software computer issues? It does seem to have a wind to it and throwing code p0734 any help would be awesome
@edgarcastaneda90866 жыл бұрын
Hola Hiram una pregunta tengo el codigo 17117 3rd gear incorrect ratio, de acuerdo a tu experiencia, crees que sea un problema mecanico overhaul necesario? o sera problema con valvebody. Mi tansmision es de un vw Passat '01 4 motion 5HP19. El carro en superficie plana tengo que acelerarlo bastante para que empiece a mover, ya con velocidad los upshift son buenos solo de 3 - 4 se revoluciona mucho y bang entra Hope you can help
@davidhuynh220210 жыл бұрын
2007 Lexus LS 460. Transmission problem. Code set P0771.P0796.P2714 How can I fix it. The Trans aleady been rebuilt. But the code pop up the same
@cameoforestine719710 жыл бұрын
hey hiram i would like to know how much it cost total to repair that VW valve body?? please
@noelreyes69004 жыл бұрын
Nothing like Sunbelt Valve bodies videos. Sorry folks.
@pauldaysmusic9 жыл бұрын
Hi Hiram, I just wrote you over Google+. I just ordered this kit, my 2007 VW Jetta is having a thump when shifting to 2nd. What ATFs do you recommend. Please state a couple for I dont believe where I live I have many. Thank you for your instructional video. Have a great 2015!
@tonytrilex25556 жыл бұрын
Shouldn't you use new gaskets?
@ecnamrofrepikol7 жыл бұрын
What are the torque values for the 09g valve body. I saw one person say 8nm + 90 degrees. Is this correct.
@gtkenderjian12 жыл бұрын
its a very nice video! how you open the solenoids ?
@edoedigarov149510 жыл бұрын
and if I cleaned them as shown it help? diagnosis but shows nothing
@markbarrett60955 жыл бұрын
Ok I have one specific question for you. Which solenoid is related to pressure solenoid D electrical. Replaced a valve body now I get limp mode upon startup. One code. #P2716
@todddanielson31049 жыл бұрын
Hello Hiram,Thanks for your videos and sharing your tips. I'll be repairing my 2003 09G VW Beetle convt. The codes i have are,01045-168 Tiptronic switch/sporadic/008-Implausible,17118-163 Ratio=P0734 sporadic/003-Mechanical,17224-163 SAE:Transmission fluid pressure sensor/swtich 1:P0840.I;ll be ordering valve body Trans-Go Shift kit and check shift solenoids.If you read this and have any imput on my problem i would very greatful. Thanks again.you have been very helpful. Todd Danielson