What Did You Buy? Toyota A750- JUNK eBay "Rebuilt" Valve Body

[@iptperformancetrans]

We specialize in high performance Toyota automatics, as well as many other models. Find Us: www.importperformancetrans.com/ 973.406.7000 Instagram - @IPTperformancetransmission Facebook - Import Performance Transmissions Tik Tok - IPT_Transmission

[@Yotalayne]

You guys should do a teardown on an A750F transmission! Would be super helpful!

[@iptperformancetrans]

I’m working on an A761 and will produce a teardown video in the near future, they are pretty similar

[@UZ-T4R]

Hey John we spoke on the phone Thursday 1/4/24, this is my valve body in your video. I just want to let people know that this chinese rebuild came with solenoids that DID NOT MATCH my wiring harness. So we do run a high risk of fitment and QC issues with these products. Very Glad I had you go through it. Great Work and Thanks for all your Help John!!!

[@iptperformancetrans]

Thank you. If it turns out to be incompatible, we’ll get it sorted out ⚙️

[@UZ-T4R]

@@iptperformancetrans Just went for a 25 mile cruise, so far so Good!!

[@arianjee2841]

Awesome content, even if im not working on valve bodies. Its good to know :)

[@Yotalayne]

Awesome video! I can’t find where the guide tools are for the reamers. Do you have a link to the tool by chance or are they tools a local shop might have?

[@iptperformancetrans]

It’s several hundred dollars, maybe a thousand for all that stuff. I’ll put a link to Sonnax in the description when I get a chance.

[@Yotalayne]

Great thanks!

[@antoniobarber8650]

A750e I have drives in reverse and neutral. Is this a common issue? Someone told me b1 and c1 possibly welded together. What are your thoughts and what should I look for to test. Not an expert but I have rebuilt a few transmissions.

[@iptperformancetrans]

@@antoniobarber8650 I’m impressed, sadly you are absolutely correct about having a welded clutch pack. I definitely see that particular failure on occasion in these transmissions⚙️

[@antoniobarber8650]

@@iptperformancetrans thank you. If I need any hard parts what’s a good reliable website or place to buy from?

[@alexking3335]

i need 1 valve body but idk if i can buy it on ebay

[@asimwahab2000]

Hey, which vehicle is this valve body from? I have an 06 Lexus Gx470 which needs a valve body repair or replacement, does it also require 8850 cast?

[@alexzamora8550]

I have a 2007 Toyota Tundra 4.7 with the A750F transmission. What would cause a delay when shifting into drive on a cold start? Once my truck has been warmed up or driven for a while, the delay goes away. Any info would be greatly. appreciated

[@cwang6951]

My A760e is fine at 210000kms but for some reason I'd love to rebuild a valve body, looks like fun.

[@ovidiolibreros9323]

He gay, repaired a 2011 toyota a750e, repaired converter, they changed seals, discs don't have codes, when it goes 2 to 3 hits, it happens in upshifts, tried a valve body, but continued problem. Greetings from colombia

[@iptperformancetrans]

@@ovidiolibreros9323 What is it doing on the 2-3 exactly?

[@G0dyo]

@@iptperformancetrans My 2008 sequoia is having a problem with 2-3 too only when cold. I changed the solenoids, I replaced the fluid, I cleaned the contacts with electrical cleaner, I ohm checked all other solenoids, and I installed a transgo shift kit. Still having the same problem. 2-3 does not shift when atf fluid is cold, once it warms up it has no problems.