Automation and Control Technology Final Year Project

Level 7 final year project at LIT. Conveyor sorting line (aluminium and nylon parts).
Design and built by Andrej Slabov and Donal Hogan.
2014

[@diegopiscoya4318]

If this was made from scratch: holy shit hats off

[@oliverbritnell7588]

very cool. good job. I'm looking for ideas for my very own final year project.

[@shaun7156]

Hello. I'm a second year electrician with some experience in PLCs and mechatronics, but still have a lot to learn. Could you recommend any good books or resources for engineering/ mechatronics?

[@apurvadange8423]

amazing work!!!!!

[@RohanBhandare-vc8gy]

what is the price of total project

[@htdthoisu]

Very good 💚💚💚💚💚💚

[@SudarshanHebbarMR]

Great job!

[@jackibanez6445]

nice project..can you give me plan for made this project..because I'm sduent want to made this final project level 4

[@bachxuanquang2837]

can you explain the working principles of this model?

[@heahjoseph3190]

hi can u give more details for this project

[@garthcusters3380]

Very cool project. You got skillz!

[@m.shemul9362]

Is this a final year project?? How many times you got for projects?

[@mohammedfayaz3676]

What could be the price range for this project can u give me the deatils of this project

[@albertusandriechristian3826]

Sounds like how it's made lol. But anyway nice project mate!

[@MikaelWittlock]

Couldn't be better music.

[@achong767]

please possible pdf for this project bcoz im looking for idea to do final project . tq

[@jasonamosco318]

I know the background music: How it's made

[@kh_manithchenda7148]

Hi! Your project is very cool. I'm a newbie. Can you list down the sensors using in this project? Thank you in advance :D

[@Hardworkingas]

+Manith Chenda Hi, 1. Inductive for sensing aluminium parts. 2. Capacitive for detecting aluminium and nylong parts at the end of conveyor line. 3. Infrared sensors for detecting parts on two slides.

[@kh_manithchenda7148]

Nice. Thank you!

[@diegoc8425]

DID you need a relay to connect a dc motor ?

[@Hardworkingas]

No, DC motor was controlled with PWM using NMOSFET

[@williamhuang5329]

Hanzhen harmonic drive gear , robot gear joint, over 30 years experience

[@huyveloc629]

Thanks you. verry good.

[@selvarajpandurangan3018]

drill the cylinder( size of the cylinder 50mm dia and 50mm height) drill depth 5mm and drill size 5mm and 7mm two drill same part different place distance between two hole 10mm . thanks and pls send design

[@Ysutra]

Can we use Nodmcu as a controller?

[@Hardworkingas]

It won't have enough I/O pins. I used PIC microcotroller with 40 pins

[@Ysutra]

@@Hardworkingas Ya sir its true, Thank you sir.. .

[@subodhmone]

fantastic.........

[@NexTreasures]

What is the name of project

[@donboi9378]

Programming language used to program the PIC ?

[@Hardworkingas]

C

[@ronaldandriecorado2982]

how much does it cost in total?

[@Hardworkingas]

Won't be able to say that as most of the materials were provided by the college and the rest was custom made.

[@ronaldandriecorado2982]

oh i see, we're planning to propose this mechatronics idea for our final year project, but we're thinking about the cost, anyway thank you for the response.

[@surajbhoite3452]

Cam you send me the pdf and ckt diagram of these project

[@charlesoluwaseuntennyson9954]

Hello, How did you interface the LCD display with the plc and where did you get the conveyor belt. Thanks very much! Woww you didnt use a PLC but something like Arduino

[@Hardworkingas]

+Charles Tennyson Hi, I used PIC 16F88 to talk to LCD display. The belt was made from 1.3 mm standard gasket material

[@charlesoluwaseuntennyson9954]

+Hardworkingas Thanks very much God bless. Have you ever the gospel of the Lord Jesus Christ. God offers you the gift of eternal salvation because he loves you and sent his son to pay the penalty of our sins DEATH. God created us to be with him Our sins separate us from God Sin cannot be removed by good deeds Paying the price for sin Jesus died and rose again Everyone who trust in him alone has eternal life Life with Jesus starts now and forever Romans 6:23 The wages of sin is death but the gift of God is eternal life through Jesus Christ our Lord. John 3:16 For God so loved the world he gave his only son, that whosoever believeth in him should not perish but have everlasting life. Jesus Loves you!!

[@chingchang5005]

Can you please share what is the PLC and other electric board that you use for this project ?

[@J0rkata]

Great project, man! Cheers! You have the exact sirname as me Andrej. What kind of PLC did you use here?

[@Hardworkingas]

We have not used the PLC, it is completely based on PIC microcontrollers. PLC inputs and outputs were left there for the future system development.

[@muhammadusama2093]

kamal ker ditta. i am working with PLC

[@conorhealy6082]

Hi, Just wondering where about you got the conveyor belt? Thanks

[@Hardworkingas]

It is made from 1.3 mm standard gasket material used in industrial application for sealing around panel doors or motor housings

[@dominikcislak8427]

PVC?

[@georgealbo]

what PLC are you using

[@Hardworkingas]

PLC part was not imlemented. The project is controlled only by PIC uC.

[@asmaadnan254]

Sir supar

[@ravikumarhanji2971]

Plz send this project information in pdf

[@ndrsg3013]

You used some custom micro-controller to replicate PLC, how did you program those and why did you decide to use them instead of a PLC?

[@Hardworkingas]

Initially it was planned in such a way that it could be controlled by PLC or uController. By the time when project was halfway through it was obvious that there is too much work involved, so we decided to drop the PLC part. Although, we left all the connections available for PLC interface (future project expansion). Basically, we ended up with three uConrollers: 1: for LCD control, 2: stepper motor driver/controller, and 3: main system controller. These three were program with C.

[@sensitiveheart2553]

What was the intention to upload on KZbin if you wish not to disclose any details on the project

[@issecret1]

To present their finished work. What, did you want them to write your paper too?

[@TheMdkhalid23]

Awesome work !!! Can i have the source files for this project ? Thanks in advance .

[@alejandroperez5368]

NO, you can't.

[@theinspirething]

What plc did u use

[@Hardworkingas]

I used two: 16F88 and 18F4480

[@theinspirething]

Hardworkingas why didnt u use 1 modular plc?

[@Hardworkingas]

The idea here was to be able to switch from PIC control to PLC control. The two 16F88 PICs were used to control stepper motor and LCD screen separately because the basic PLCs do not have this option, and it would just send some high/low signal to 16F88 to perform some action. The whole process was controlled by 18F4480 which could be disabled by switching on the PLC conrol option. Unfortunately, we did not have enough time implement the PLC part into this project.

[@johnchristopherjurado78]

Sir can i know All the materials needed in this project ? pls ? thanks :)

[@暒諸葛]

Can I have this things flow charts? I have to try to do :)

[@sirsharmemon9132]

Can you share me the main circuit diagram of this whole project with readings of parameters used in it?

[@chosam3722]

Nice bgm. Should have had a woman voice over it

[@mohammadnedal9255]

how can I get a cod

[@praytherosaryeveryday2709]

Go fishing

[@axelbluetupaz7821]

what kind of sorter do you used?

[@Hardworkingas]

The blocks were sorted using inductive sensor. Blocks made of aluminum and nylon.

[@praytherosaryeveryday2709]

@@Hardworkingas did you find this course to be hard, I'm thinking about starting it at some point

[@Hardworkingas]

@@praytherosaryeveryday2709 If you are good at maths then you'll find it relatively easy. Programming is a big part of it too. At the end, just like in any other course you'll have to study hard in order to get good marks. The good thing about this course is that there are plenty of job opportunities at the end of the tunnel :)

[@tusharsaini2176]

@@Hardworkingas hii, i am thinking to work on this project. Would it be difficult 4 u to share some PDF, blueprint for the project or the coding & connection portion.. anything regarding this project.

[@mohammadaminuddin4031]

what kind of sensor you use near the center of the conveyor for nylon and aluminum parts?