HYUNDAI BAD TRANSMISSION, REPLACE SHIFTING SOLENOID FIX TRANSMISSION

[@AutoRepairGuys]

Products that we use and recommend: ► Transmission Solenoid: amzn.to/2ZytZYu ► Transmission Oil Pan Gasket: amzn.to/3pQKASc ► Transmission Filter: amzn.to/3BzrAdq ► Transmission Oil Pan: amzn.to/3mqbXQW ► Transmission Fluid: amzn.to/3mqlDuM ► Panel Removal Set: amzn.to/3YiMADu ►Torx Set: amzn.to/2hbyWgd ► Tool Set: amzn.to/3p5MM6t ► Screwdriver Set: amzn.to/3XRB28Q ► Engine Oil: amzn.to/3xBc8B9 ► Oil Filter: amzn.to/3w0Ulme ► Torque Wrench: amzn.to/32qyRwg ► Liqui Moly Engine Flush: amzn.to/3IiDBID ► OBD Scanner that we use most often: amzn.to/3I4MQfe ► Check out our Amazon Store for the tools and parts that we use: www.amazon.com/shop/worldmechanics

[@rondapierson9313]

No long drawn out video short simple and straight to the point thank you great video 👍🏽

[@markcooley8571]

Thank for making this videos for hyundai cars. I had to change out a bad fuel injector, your video helped me accomplish that task. So thanks and please keep posting. Update, if you change out any parts in your transmission, you will need to reprogram your car with a scanner. Speed sensor or valve body ribbon connector. Otherwise you will have problems with your transmission shifting.

[@tarkusnj3]

Good video but I want to know how to determine which solenoid to replace and the method/procedure to figure that out.

[@shark70007000]

Of course, the thumbnail picture is at the end, where 4 links for other videos come up, so I can't see it in the video. But those look similar to the VVT solenoid for my 5.7 Hemi. The original screen broke apart on my engine. Then the Dorman replacements keep having one of the new style screens pop loose. It then slaps around at the edge of the valve, causing it to malfunction. I've discovered that the Dorman is junk. I've had to replace that solenoid on my VVT 5.7 Hemi, 4 times already. Since it's under warranty, I keep using the same replacement. But I put a retaining ring over the screens this time, similar to the new replacement from MOPAR. The thumbnail picture, just made me want to share about the Dorman garbage, that I have had to deal with. Guess I should have gone to the dealership and ordered the right part. LOL

[@richardshalla]

That is very helpful. I am thinking on doing this job on my 2010 santa fe sport AWD. On occasion I get a high Rev hard shift into I believe 2nd to 3rd. Seems to happen when I am coasting along not if I'm hard accelerating. I am looking for videos that will show me the way and helpful tips and info. Thanks for your help.

[@aliciahill7482]

Very thorough video Thank you

[@chicagoui9299]

Auto repair guys, can I do this cleaning to the VVT selenoid on the exhaust side as well? I replaced the intake vvt selenoid and I'm still getting an engine light for bank b. Any help would be amazing. I have a 2010 Santa Fe v6 3.5

[@poonhandler520]

No one wants to take off the front end and radiator. To fix their vehicle transmission problem. However informative content. Might convince my coworker to do this on a weekend. His car has been having issues. Too bad Hyundai didn't design the sensors on the outside of the transmission. So you could easily access them

[@DragonThruster]

Is this accessible from underneath the car? Or do I need to remove the engine and everything to replace the solenoids?

[@thomasrivera1557]

Hello guys I got a A6FM1 4WD. My transmission has problems on 3rd gear shifting to 4th. It’s does not shift on time and the rpms go up and once goes into gear will bump hard but if I let go of the pedal will shift almost normal. Which solenoid do I need to replace ? What would you guys recommend for repairs ?

[@petervanhaeften]

I have the same issue I wonder what the solution is

[@islamahmadi]

Hello. Have you found the problem? My mechanic replaced the part but the problem is still there. I can't find a good mechanic who can fix it.

[@franciscogotay8748]

Hello, my name is Francisco Gotay, I'm from Puerto Rico, I have a 09 hyundai accent and it has problems with the transmission solenoid, code p0760.the car when it stays in gear 3 but you turn it off and on and it takes all the gears until it detects the problem

[@markflo2842]

did you find out what it was?

[@williammahan3838]

i need to replace the lowest solenoid on the valve body as it sits in the transmission but cant find it on amazon with your link can you help

[@williammahan3838]

after you clean and check each solenoid should you hit the valve body with the same cleaner

[@jjbogart37330]

Do you know the torque specs for 2013 2.4 gdi bellhousing bolts

[@bigkingdresavage]

Did this work or did the light come back on???

[@randykelly1595]

With the row of solenoids which ones or the shift selenoids

[@jouaxiong1989]

What does it mean when stuck on 4th gear. I cant recall the code. I'll look it up again

[@vibin_headbanging]

P0741, I have the same issue.

[@markflo2842]

Bad speed sensor, im going thru the same. did you find a fix?

[@crystalanderson2456]

My car is going in drive n first then second then third it’s like I’m driving a automatic stick shift. Is it the soloneid

[@abdulrahmansalim9773]

Hyundai amica 2002 automatic 1L. No movement drive or reverse symptoms? Shift lever smooth ok 😁

[@nalsulimani]

good day my friend i have sonata 2009 gls 2.4l with transmission problem on D not working properly Fails when switching form first to the second gear but its working with tiptronic properly SHIFTING SOLENOID make this problem?

[@kushmeetsingh-v9n]

Sir i am from INDIA I got a TATA HARRIER front wheel drive automatic torque converter transmission and one day it was running and the car got hold to reverse in drive mode now it is hold in reverse mode. The car moves properly in the reverse gear but when change it to any mode except reverse the engine begins to shake heavily ? 1.I have changed transmission control module no effect 2.Opened the gear looked for damaged nothing there 3. Changed valve body still same problem So can u help me with whats wrong in that actually the automatic transmission is manufactured by HYUNDAI and it is bought by TATA So i dont know whats wrong with this transmission can u suggest me so ican repair Also, can the torque converter can be faulty Or oil pump in the transmissioncan be faulty

[@ericseddon4573]

Okay so how do you add the fluid you took out theres no dipstick in mine?

[@jeffkovene4420]

What if that ground wire was for the transmission control solenoids?

[@k2par]

Which one controls 1,3,5 7 gears? My transmission for my 2016 is only working in 2nd, 4th, and 6th gears (and Park and Reverse). Or is that a different problem?

[@thabangmaphutha6673]

Did you get it sorted cause mine is taking 3,5,7 and park

[@k2par]

@@thabangmaphutha6673 not yet and it looks like this guy doesn't respond anymore to his channel

[@chinaboss6683]

Check and replace solenoid or wire harness.

[@ejusdem_generis]

I’ve a Santa Fe which only goes in reverse..

[@k2par]

@@ejusdem_generis Sorry to hear that. Mine transmission just went out 2 weeks ago and is probably not worth replacing :(. You won't see me ever owning a Hyundai again

[@topshottadondada6805]

Cant find your video that has the diagram that explains which is which. NOTHING on the internet is showing me either

[@psychomaniac189]

you have to take the engine out to do this?

[@chinaboss6683]

No.

[@yvonnesurls5720]

Does this apply to 2007 Elantra?

[@thomasedwards3372]

Slow down😉

[@josechi.6560]

thank you for the video but the accents just wont let me pay attention, sorry

[@Top_Cop]

Rude

[@dustineckford7563]

You talk to much at the beginning get to the meat & potatoes