PORSCHE CAYENNE COOLANT PIPE REPLACEMENT COOLANT LEAK FIX

[@AutoRepairGuys]

⛐ Check out our Garage to see what tools we use and recommend: www.amazon.com/shop/worldmechanics ⛐ Subscribe and hit the notification bell by the subscribe button for new videos: kzbin.info ⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys

[@kelvincs]

Before starting my coolant pipe swap, I pulled fuses 13/14 (fuel pumps) and started the vehicle until it stalled. This will relieve the pressure from the fuel system.

[@Calebtheboss]

For the three that disliked, he did what he promised and he did it good. So why did you dislike? Because you had no idea what you were doing?

[@8094799]

he did a perfect job that save me from breaking my porche and all plastic clip GG well played bro

[@Junkman2008]

You need to invest in some hose clamp plies. They will make your life SO much easier when it comes to working on engines.

[@wassim737]

Amazing video. Thanks a lot. I was going to buy a cheap one today. I saw your video and now I've changed my mind.

[@tcartiar]

😂🤣😂🤣😂🤣 me too !!!

[@janantoni3604]

I've been watching your videos on many occasions.You are very intelligent, clear easy to follow instructions. I appreciate.Thank you guys. God bless.

[@ExTrumpet]

Perfect time to change an old starter while you're in there!

[@ryan9847]

Such a heavy job , but you have made it possible

[@MrOmgfreak]

all i can say is thank god i bought the 3.6 vr6.....a fun engine thats easy to mod and work on. this is crazy! vr6 soo much ez to work on.

[@ravejunkie]

I just did my valve cover seals and my starter, I was going to do the coolant line "while I was in there" but decided not to after watching this. Great guide thought and subscribed. 04 S

[@scotturich]

Regardless if you need it or not best to replace the starter at that point

[@javierricoquintero]

So the aluminium pipes are leaking too?

[@mikefody2764]

Great job! Thank you for taking the time to make these videos! Not the easiest cars to work on, let alone with a camera in your hand... haha

[@blakslee720]

My dad is looking at 955 cayenne s's. Is there enough room to get a borescope under the manifold and look for coolant?

[@willieyac]

Sooo. You replaced a the aluminum replacement pipe with aluminum replacement. Why did the "original" aluminum replacement fail. this is the 3rd time getting fixed.

[@guillermoclass1381]

Is it normal for temperature gage to go over a bit from middle on temperature gage , when activate a/c it stays in the middle thanks

[@MikeHudson-px2gc]

Good to see you post the links to the parts to see the prices.

[@commissionerhigh8058]

Great job guys. RESPECT.

[@raymondp.kotiiesq.5934]

Having dis-assembled that far, wouldn't it be wise to replace the starter motor? Unless the starter was replaced in the last year or two, it seems like that would be wise part to replace given how much work it takes to access it.

[@petersawadalla]

he did. you can see at the end of the video its out. he has a separate video on it.

[@nyc-brooklyngirl8340]

Omg 😱this is a big job

[@ryanlemmey2191]

Why lie, those pipe have to come out to get starter out. You know this but is previous video state you can leave in place.

[@stuntdrvr]

@42:00 slide hammer from middle of the screwdriver?

[@danielfranco1843]

Do i have to remove those pipes to take out the starter? Wont come out with it connected

[@JayDee-xj9lu]

If you wanted to remove the starter you have to do all this as well?

[@jamalkhan7436]

thank you fro the video

[@estebano2930]

Hey guys so i believe I'm leaking oil by the driver side turbo/ intercooler pipe. It's a common issue do you think you might be able to do a video

[@samuelvincentvella]

Excellent video guys thanks! But where was the leak in the first place?? And you already had the metal coolant pipes - so how did they fail? I thought you were replacing plastic coolant pipes??

[@koro287]

Exactly! ripped off

[@lalitkishore2979]

I'm guessing but perhaps it's just the sleeves that are plastic, but they should be replaced with aluminium ones otherwise your engine may be destroyed. Perhaps they were just replacing the pipes because they can deteriorate too, that I don't know.

[@a.s.4135]

Hi. Your instructions were great! I followed your instructions to replace the coolant pipes. While at it, I replaced the thermostat, starter (since it got soaked by the failing plastic pipes), water pump, belt and belt pulley. However, after I put things back together, the PSM light came on and the car idles rough (revs to 1200 then drops to 800 continuously). Any idea what it could be?

[@markymark-r]

Wow. Looking to buy one of these cars but I’m scared this job hasn’t been done. Is there an easy way of checking before I buy? Thanks guys.

[@MrOmgfreak]

sure there is away to check.....buy a 2009 model problem solved.

[@aliwarraich5332]

@@MrOmgfreak 2008 also had this problem?

[@0wn1nwc]

6 months late but if you look at the bottom on the bell housing on the transmission, the coolant will come out a tiny hole in it. Also the starter might make some noise too, the coolant gets in it.

[@0wn1nwc]

@Umut MISIRLI just like its worn out or struggling to turn the flywheel/thrust plate, the coolant gets in it and dries up.

[@koro287]

No

[@nickmantzoros]

So why did the pipes need replaced if they are already the metal ones?

[@ScottMcEwen1]

This guy's good. Very detailed. Thanks

[@bruceshaw145]

quick question - please - I have a 04 Cayenne S 4.5 V8 - I purchased used and have the leak problem - I bought the "aluminum repair kit" for this fix - it appears way above my skill level - I know a few people have asked - but what is the time/labor/hours a consumer can expect at a Porsche service center? Any ideas? Has anyone had this done at a service center? I'm just trying to figure out a ballpark estimate? can this be a one-day or less job? thanks for answering - really appreciate the video and any input from Cayenne Porsche owners with the year/model for this problemo.

[@Keith-vacuums]

Love the videos keep up the good work

[@eddiesgsr]

How would you go about changing the rubber hoses that attached to the aluminum pipe

[@jamalkhan7436]

talking about hard and long job .. I ask my self with wonder , how they have designed and build from the zero >> such great minds + how they have put everything together and then sell it from the show room >> WOW

[@JayDee-xj9lu]

My god what a fiddly job. Thank god I don't work as a mechanic any more. I was considering getting a Cayenne but I might get the V6 Instead. What a shit place for a starter motor. A couple of suggestions. Run a wire from the starter solenoid to a spot near the battery and tape it of. That way you can hot wire the starter if you need to. Second, please don't wear a metal watch band or rings. A friend of mine got welded onto a starter positive when changing a oil filter. Ow. Great video. Thanks. I think I will make up stainless steel pipes when I buy mine.

[@rb6491]

Or be sensible and disconnect the battery.

[@TheHomeRenovator]

You guys are awesome, thanks for the videos!

[@dontejohnson8946]

How do you push the thermostat housing into the cooling pipes

[@chrisdelgado3530]

Excellent videos

[@GHOST1996ps3]

Do you guys have a video on every car I have questions about

[@Zionfarm]

I am guessing this is the same for 08 Cayenne S?

[@D.Rothchild]

Wow. Good job.

[@suwiwu]

I have offer for a 2004 4.5cayenne S its mixed oil and water has not be driven since the incident..is that possible to save?

[@RriReyy]

What are the tools you use

[@countmarlo]

Can you do a video on freeze plugs for the cayenne

[@playeradelaideduo9953]

Thank You for the Video, I enjoyed it very much. Can you please advise man hours to do the job? Also would it cost more for a Cayenne Turbo S 4.8 litre?

[@4581-z8w]

The 4.8 litre engine has the metal ones from factory

[@RafeMeOhwee]

Please tell me (respond to this comment) how many flat rate hours the time guide allows for this repair of replacing coolant pipes. Thanks very much!

[@Luvsmusic909]

Wow what a fricken job . Do you think I should replace the starter at the same time ? And what else may have been damaged from the coolant leaking everywhere? this is not something I want to have to go thru again . 04 turbo kicker Posche canada says no recall for mine. Sucks

[@Outsourcer]

Its a must have, to replace the starter at this point

[@HarryFromTheNorthSide]

God bless you

[@josephhe5315]

Excellent video with so many details. Which year of the cayenne and how many mileage? What is the highest mileage have you seen on Cayenne?

[@ПавелПетренко-у7щ]

Прикольно, особенно акцент. Ай вил спик фром май харт))) Если серьезно спасибо за работу.

[@norbertulrich4776]

Sehr gut

[@Saywhatohno]

How can I spot coolant leak in this car

[@Dougf610]

6 cylinder replacement?

[@Mvpbug]

Under that last pipe there’s chords I think one of mine popped off

[@scotten34]

Cool.. Thanks

[@stuntdrvr]

thank you thank you!

[@nabule]

Very helpful thanks a lot appreciate it

[@Dougf610]

3.6 alternator replacement

[@8love87]

This O ring are big sh*t...If you change just them will cost less.good job guys! How much will cost (parts + work) at 3.2 v6 2004? Regards!

[@0wn1nwc]

its pays 12 hours just to pull the pipes and replace.

[@thex8027]

Why are you removing the ALUMINUM pipes to replace them with ALUMINUM pipes? I watched an actual fix and the bad pipes were plastic not aluminum.

[@kellypeterson3660]

It does look like a big job unless you work on mercedes. Everything is very intuitive on a Porsche. MUCH easier than the s600

[@DanielMezacar]

Excelente vídeo amigo, muito bem explicado Um grande abraço .. 👊🇧🇷 Brasil - Sao paulo

[@ptzish]

This is a great video. Thank you. You just convinced me to never buy one of these. Jesus Christ! What a clusterfuck!

[@jameshughes3241]

HOLY SHIT what a job i thought about buying one now i know why so many are sitting in used car lots STAY AWAY

[@mostafahabibi9922]

❤❤

[@MrOmgfreak]

you can always buy a 2009 and up model...that way no worries about this problem.

[@samuelvincentvella]

time traveler are we there yet wasn’t fixed fully with later models I think

[@kkellerk23]

957 models 08 and up are good, but have other coolant issues lol.

[@killabee623]

What's with German engineering.

[@graemelliott3942]

What a pain in the ass. I would put a new starter in there too.

[@mcguirejack0]

Strongly recommended! I'm having to go back and do the starter 5 months after the pipes were done...

[@RriReyy]

What are the tools you use