AUX Switch Installation of the Triple LED Fog Light Kit by Oracle Lighting - 2021+ Ford Bronco

In this video I go through a step by step install of the Oracle Lighting Triple LED Fog Light Kit, using the factory installed Auxiliary Switches on a 2021+ Ford Bronco.
Here's a link to the (WHITE) Oracle Triple LED Fog Light Kit: www.oraclelights.com/collecti...
Here's a link to the (YELLOW) Oracle Triple LED Fog Light Kit: amzn.to/3rmM4n1
Chapters:
0:00 - Intro
0:16 - Overview
0:29 - Fog Light Installation
1:50 - Fog Light Wiring Installation
6:08 - Auxilliary Switch Wiring
12:33 - Powering Them On
13:20 - Outro
Hopefully you found this video useful, if so, like, comment and subscribe for more content!
Enjoy!
#fordbronco #bronco #2021 #2022 #2023 #2024 #oraclelights #sponsoredbyoraclelights
Oracle Lighting triple LED fog light installation on the full size Ford Bronco.

[@JonathanLPierce]

Incredible video. Couldn’t have done it without your input and directions.

[@CUPRADESIGN]

Thank you so much for the compliment, I appreciate it! Really glad that the video helped you out!

[@mikkibakken]

I agree . The demonstration was wonderful.

[@CUPRADESIGN]

@@mikkibakken Thank you so much for the feedback, I really appreciate it! Glad you found it useful!

[@user-bw8uk6hm4h]

Thanks for the video. I got the same lights and there wasn’t even an install manual in the box. This helped me out. Appreciate your video. Thanks

[@CUPRADESIGN]

Awesome! Really glad that the video helped you out! That’s why I do these, just to help people out. Enjoy!

[@DaggaSous]

Really clear and clean presentation! Thank you

[@CUPRADESIGN]

Thanks very much, I appreciate it! Thanks for watching and glad you found it helpful!

[@AdamHillikerLikesRobots]

Thanks for the video; definitely considering picking up a set of these. Will be following this video step by step when it's time for the install!

[@CUPRADESIGN]

Thanks for the feedback, so glad you found the video useful! Good luck with the install, we love them!

[@scottdulock386]

Excellent video. Thanks so much. Made my installation so much easier. Keep up the good work.

[@CUPRADESIGN]

Thank you so much for the feedback, I appreciate it! And I’m so glad you found the video useful! Enjoy your lights! We love ours!

[@richardsavidge942]

Thank you for your video. I used your video to connect my lights. Very easy to follow.

[@CUPRADESIGN]

Thanks Richard, really appreciate the feedback and so glad to hear that you found the video useful! Hope you enjoy your lights as much as we do!

[@patricktalbert4913]

Thanks for the video! You did a wonderful job explaining the process of hooking up to the auxiliary switch.

[@CUPRADESIGN]

Thank you so much for the feedback, I really appreciate it and I’m so glad that you found the video useful!

[@davejoss6324]

Great video + clean looking install All I need now is for my lights to show up from Oracle!

[@CUPRADESIGN]

Thank you, I appreciate the feedback! Hopefully you’ll get your lights soon and be able to get them installed. Glad you found the video useful!

[@jayhodes7135]

Great and very detailed video for instructions every step of the way. Well done!!

[@CUPRADESIGN]

Thank you so much! Really appreciate the feedback. Glad you found the video useful! Thanks for watching!

[@ChrisKirwan-fx1jm]

Great Lights ! Perfect Fit ! Brilliant Tutorial !

[@CUPRADESIGN]

Thank you so much! So glad you found the video useful! Enjoy your lights!

[@j.g3823]

Thank you. Just installed on my 2 Door. Sharpens up my Base. Now to find some new wheels.

[@CUPRADESIGN]

You’re welcome! Thank you for watching and glad that the video helped you get them installed. I have to agree with you, they really make a difference to the front end while keeping an almost OEM+ look to them. How do you like them so far?

[@mazeman01]

Thanks for the great instructions. I just finished successfully installing a set. They look great! Took me longer than you stated, but that's true of EVERY project I undertake. LOL

[@CUPRADESIGN]

You’re welcome, glad you found the video useful! Any of these projects take waaaay longer than I plan, mainly because I’m recording them these days too! Thanks for watching, I’ve got a lot more content coming out this year for the Bronco! Stay tuned!

[@samsilverman4654]

Thanks for the video! Just installed a pair yesterday

[@CUPRADESIGN]

Awesome! Glad you found the video useful and hopefully you are loving the fog lights. Still one of the best looking sets out there for the Bronco!

[@fretless05]

Love those and they're VERY reasonably priced compared to others I've seen.

[@CUPRADESIGN]

Yes, absolutely, they are really nicely made and are so much more sensibly priced than others. Love how they look when installed, definitely have an OEM+ look to them. Now, when mine arrived there were some chips in the powder coating from the packaging, which I believe they have rectified now. I went over them with some black Krylon paint. And also be aware that they are designed as fog lights and not ditch/spot lights, so they aren’t quite as bright as those style lights. They are fantastic tho and exactly what I wanted! Thanks for watching!

[@VADERR7]

Very informative video. Thanks.

[@CUPRADESIGN]

Thanks very much, I really appreciate the feedback!

[@RoadRushNation]

Great instructions thanks for sharing

[@CUPRADESIGN]

Thanks very much, I appreciate the feedback! Glad you found them useful, and thanks for subscribing!

[@williswilla2346]

Thanks so much for this. I already have the grill lights hooked up to the aux using the grill wire. Gonna need to run another wire and figure that out to add these. I have the Amber ones sitting in a box right now.

[@CUPRADESIGN]

Thank you! I will be in the opposite boat, if I order the grill lights, that I'll need to extend the wires for them up to where the AUX wires are, being as I used the purple grill wire. I guess, alternatively, I could just tap into that wire as well if I got lazy! But it makes sense to be on a separate switch! You'll just have to extend the wires in your situation from the harness to the AUX switches near the firewall, should be a simple process, and will actually give you more options for grounding them. Good luck, the amber lights look nice too, hope everything goes well for you!

[@KIckAssPinball]

Kit looks great!!

[@CUPRADESIGN]

Yeah, we love it. It’s nice and bright too!

[@sherrygaff5798]

Looks amazing!!!

[@CUPRADESIGN]

Thank you! I have to agree, makes a huge difference to the front of the Bronco!

[@anyanascom]

thanks for the video !!!

[@CUPRADESIGN]

You’re welcome! Thanks for watching!

[@anyanascom]

Thanks for the video !!!

[@CUPRADESIGN]

Awesome, you’re welcome! Glad you found it useful. Check out my channel for many more Bronco product installs and reviews. Thanks again!

[@lce1111]

Great Video and complete instructions! thank you!!🙂

[@CUPRADESIGN]

Hey, you’re welcome, so glad you found the video useful! Thank you for watching, I appreciate it. Good luck if you’re going to be installing a set any time soon!

[@lce1111]

@@CUPRADESIGN this weekend in the cold of Ohio! Thanks!

[@CUPRADESIGN]

@@lce1111 Ahhh, awesome! Good luck! I’m adding a light bar this weekend and recording several other videos this week! Again, good luck!

[@mawage666]

This is exactly the video I was looking for. The camera work and editing was brilliant too.

[@CUPRADESIGN]

Fantastic, thank you so much for watching, I really appreciate it. Glad you found it helpful. That’s my goal! I’ve got a lot more videos in the works! Thanks again!

[@mawage666]

Well I just got you from 714 to 715 subscribers.

[@CUPRADESIGN]

@@mawage666 Thank you very much, it's really appreciated!

[@mawage666]

Just got mine in the mail yesterday. So rewatching this video and about to install them now.

[@CUPRADESIGN]

@@mawage666 Awesome! Good luck with the install, and if you have any questions, feel free to reach out!

[@robertwright2311]

Great video

[@CUPRADESIGN]

Thanks for watching Robert, appreciate it! Glad you liked it!

[@jamespondy0]

Thank you. I work for Ford, and they don't tell us about how to do stuff like this.

[@CUPRADESIGN]

Hey, no problem! Thank you for watching and I’m glad you found the video useful!

[@anthonygallo3576]

Sadly for me i was unable to get the modular bumper on my wildtrac., Which means alot of stuff i will be missing out on. A company called M&R makes a double for the capable bumper which is about $500. Still looking for a brushguard. Thanks for another great video

[@CUPRADESIGN]

That’s a shame. It was a no contest option when we ordered ours, it was a must have option! You might get lucky and fine one on the Bronco forums or on eBay that you could snap up for a decent price. That’s what I did for a set of rock rails. I purchased set that are pretty much brand new, in case I need to review or promote products that attach to the rock rails. Got them for a good price!

[@adamwebber9547]

Easy to follow demo - thanks! I have Oracle's spare tire ring 3rd brake light for mine... when it gets here. Why did you choose the Aux1 switch? Is it because of the amps of the fuse? Thanks

[@CUPRADESIGN]

Thank you, I appreciate it and thanks for watching! I've been contemplating the 3rd Brake Light Ring and also the Light Up Front Letters too. So - the reason I chose AUX1 is because as you rightly state, there's a 30A fuse in the harness that comes with the fog light kit, but also, I don't have plans for anything else with a high draw, I am already using AUX2 for my Rigid Ditch Lights, so having the two close to each other was what I wanted. The beauty is, that you can change their locations really easily, if our plans change in the future.

[@jacemagna]

Hi, great video but I was wondering about the light up letters for the grill. I ordered both through oracle and am waiting for them to arrive. My question is basically if you have done that yet and if the 30amp aux 1 can handle all that.

[@CUPRADESIGN]

Hi, thanks for asking, at this time, I haven’t installed the ORACLE letters for the front. It’s something I’ve been considering, but just haven’t gotten round to them. And yes, AUX 1 is more than sufficient. You can actually put them on AUX2 - AUX5 without issue. Hope that helps.

[@steverendon9842]

Great video. Followed the steps. For some reason I keep blowing the Aux/30amp fuse. Cut off relay and switch because I have the auxs. Any ideas on what it may be. - both Reds to purple wire - both blacks to ground bolt close to battery - purple to yellow. Once I turn on switch it blows fuse

[@CUPRADESIGN]

I just rewatched my video being as I did that install over a year ago. I’ve not had any issues in that time with the lights at all. The only thing that I can suggest is that the lights are maybe not being grounded properly. You might want to double check the two black wires, how you connected them and make sure that they are both truly grounded at that point. Otherwise I’m really not sure why you would be having issues like that.

[@gregh258]

Love your videos, extremely concise and well done. I plan on getting these same lights but read on the Bronco6G forum that they may not be street legal due to how high the beams are in relation to the headlights. Some user added nylon spacers to the bottom screw of each light to point them down (lowering the beam). Have you had any issue with blinding oncoming traffic or do you only use these when off road. Thanks.

[@CUPRADESIGN]

Hey Greg, thank you so much for the feedback, I really appreciate it. So, they lights themselves are DOT Compliant, so there is no issue with legality there. However there have been instances of people being flashed by oncoming vehicles when they have the fog lights on. There are a couple of different things you can do. 1) There are tiny washers that you can buy, and insert them in the lower mounting screws to effectively push the bottom of the light further away meaning they angle down more. 2) If you take the butt of a hammer, you can rest it on the light housing from the front and actually push the frame slightly to angle the individual lights down slightly. 3) When mounting the lights you can add a small shim to the front edge of the mounting bracket, essentially pointing them down slightly. I have been flashed once or twice, but haven’t driven a lot at night yet. However, if it continues, I have a couple of rubber gaskets left over from installing a light bar, so I will add them to the front of the lights. Hope that helps! And thank you again for watching!

[@gregh258]

@@CUPRADESIGN Thanks for the info! I'll just add the spacers before installing the lights. All I need now is the truck to put them on. Still in limbo as far as delivery goes, I was converted to a 23MY. Thanks again for the installation video, will make it a breeze.

[@CUPRADESIGN]

@@gregh258 You’re welcome, and hopefully it helps out. Good luck with the delivery of your Bronco, I know the anticipation well. This time last year we were still waiting on a target build week. And this year, I’ve had a 2023 Camaro SS Convertible on order since April! It finally got built last week, waiting on delivery now. Good luck with the Oracle fog lights install, and if you have any more questions, feel free to reach out. Thanks again!

[@miggut1980]

@cupra How do you like the light output from these fog lights? Curious how bright they are and well they have performed.

[@CUPRADESIGN]

As you may have seen from my channel I’ve checked out many different fog lights but these still remain my go-to set that are installed on the Bronco. Partly due to being directly hooked to my AUX but also because I love the light output. Super bright in fact I had to record a second video in order to aim them better so as to not blind people. They have lasted well, only issue I’ve had is a little paint issue from new which I just masked and painted. And then I do have some condensation in one of them. Reached out to Oracle and they said that they are vented and the water would dissipate and true enough, it did. Hope that helps. Still love them over a year on.

[@charliealpha11f3b2]

Nicely done. Have you had the opportunity to drive at night and use them as intended (in foggy conditions)? So much debate on fog lights when it comes to lens diffusion, color, etc.

[@CUPRADESIGN]

Thanks, I appreciate it. I actually only installed them last night, so I haven't driven with them at night apart from pulling back into the garage. According to Oracle, they are 'DOT Compliant' as fog lights, but that pretty much states the they aren't too bright to annoy other road users. And it's been 100ºF+ every day for a long time now, so we're not going to have fog for quite some time!

[@mikkibakken]

@@CUPRADESIGN We're coming into winter right now in Northern NY State. I drove my vehicle home from Maine after purchasing it in a whiteout. It was very difficult to see with the LEDs for sure. Im hoping the yellow lights help cut through the snow without reflecting. We shall see.

[@CUPRADESIGN]

@@mikkibakken Wow! Glad you made it home safe. I’m down in Texas, so if we’re going to get snow, it won’t be much, and won’t be till February! These fog lights are one of the best decisions I’ve made for the Bronco, they really look great! Good luck!

[@marioruiz8028]

Hi. Great video. Was wanting to ask why you used the yellow 30 amp on the fog lights? Would three through six switches at 10 amp be enough? Best.

[@CUPRADESIGN]

Hey Mario, thanks for watching and great question! So, I have two reason as to why I did it this way. First reason is personal, I don’t have plans to install a winch or anything with a high draw, my ditch lights are on AUX2 so for me AUX1 made sense. The second reason is that the harness that I cut had a 30A fuse in it, so figured with AUX1 also rated at 30A it makes sense. Now, I’m also no electrician, so take my next comment with a pinch of salt, but I have seen a video where they show the draw of both fog lights and it’s nowhere near the 30A threshold, so you should be fine using one of the AUX4-6 switches. As I say, I don’t have plans (currently) for additional lights, but that could change, and the switch over to a different AUX switch would be really simple. Really appreciate you watching, and keep an eye out for more videos coming real soon!

[@loudefonzo7106]

First let me say this ai well done video. Thanks. I screwed up my first reply. Oracle states that the maximum draw for the lights is 3.6A @12V DC. Not sure why they provide a 30 Amp fuse in their wiring kit but if their 3.6A draw number is correct then Aux 3 - 6 fused @ 10 Amps should be more than enough.

[@toma6109]

The Oracle site said there is a way to wire the lamps such that you can illuminate a single emitter (light) on each side for on-road and illuminate all emitters for off road. How is this done?

[@CUPRADESIGN]

In order to do that you would have to look at the harness and separate the wires from each light and wire them up to the individual AUX switches. Eg, at this time in the video, I have both light (both sets of three lights) hooked to one switch using the harness provided. You would need to pair back the harness for example to the two outermost bulbs and wire just those two bulbs (one in each fog light) to a single AUX switch. That will give you a single light on each side. Then you could wire the remaining 4 together (2 on each side) to another AUX switch and that would give you control over the other 4 bulbs. Another work around is in my other Oracle video which is to aim the lights down just slightly so that you don’t blast oncoming vehicles with excess light, while maintaining the great light output from the Oracle lights. Here’s a link to that video: kzbin.info/www/bejne/bHO7mKKmotdrd8ksi=fPtBOwwJfrl5z750 Hope this helps.

[@randyvires9576]

is the purple wire the only one supplied up front? If installing fogs and running lights I'll need to run one all the way up to firewall?

[@CUPRADESIGN]

So yes, up front there is only the one purple wire. And in this instance I used it for my fog lights. I have however since installed a light bar as well up front, and in the video I show you how I ran the harness for it separately. Hope that helps. kzbin.info/www/bejne/qqCymGWbgqZsZ9k

[@Jpulido91]

What was the first purple wire you tapped into? Great videos!

[@CUPRADESIGN]

Thank you Johnathan, I appreciate the feedback on the video! The purple wire at the front is a pre-wire for the AUX switches. It's basically a wire pre-routed through the engine to make it easy to wire up to the grill area. You don't have to use that if you want to, but it's there to make it easier to wire up to the AUX switches. That wire has no power to it as it stands. It is just a length of wire from the grill to the far right corner. Once you wire your Oracle lights to that purple wire, there is still no power to them. When you go up to the far right corner of the engine bay, you then connect the other end of the purple wire to whichever one of the AUX switch wires you decide to use (I chose the 30A switch #1, but you can choose whichever one you want). Once you join those two together, and also connect your ground wire, you have a full circuit, providing power from your AUX switch. I promise you, it's really easy this way - if I can do it, anyone can do it! Again, thanks for watching, I really appreciate it!

[@Jpulido91]

Ah okay got it! Yes I will be doing this install. Super clean! Thank you

[@CUPRADESIGN]

@@Jpulido91 No problema at all, and thanks again. If you have any questions, feel free to reach out, I made this video just to help people out, it's not perfect, but it's useful!

[@neverendingweekend]

Thanks for the video. How come you don’t need the fuse anymore?

[@CUPRADESIGN]

Thanks for watching, I appreciate it. When you are wiring up to the AUX switches in the Bronco - they have fuses already built into the wiring (different rating for the individual switches, 30A, 15A, 10A, 10A, 10A, 10A). In the owners manual on the head unit, it shows each AUX switch 1-6 and their corresponding rating. So there is no need for an additional fuse. Hope that helps: www.bronco6g.com/forum/attachments/revised-aux-ratings-png.194709/

[@neverendingweekend]

Ahh. Awesome. Thanks! Good luck in the channel!

[@CUPRADESIGN]

@@neverendingweekend Thanks very much, I appreciate it! Check out my other videos, and I have many more videos in the pipeline!

[@rickwagstaff7710]

@@CUPRADESIGN Cool video !thanks! what color is the 15 amp number2 auxiliary wire? Later I want to get off-road lights so I’m gonna use 1 for that Thanks

[@CUPRADESIGN]

@@rickwagstaff7710 Thank you, I appreciate it. The AUX 2 wire is Green/Brown. Here is a guide from Bronco Nation which is essentially a Ford Monitored forum: thebronconation.com/accessories-n.136/upfitter-switches-t.7931/ Look down the page to the second major chart in Post #5. That has the most recent information in it, with the 30A fuse for AUX 1 and the 15A fuse for AUX 2. Hope that helps! Good luck!

[@OutHereOnTheFlats]

Hey buddy is it required to cut the cords? i didn't see that in the instructions.

[@CUPRADESIGN]

Hey Cole, it’s not necessary to cut the harness at all, if you are using the switch that comes with the lights. The reason I cut the harness up was to hook them up to the AUX switches, as that’s how I wanted to control them. But if you want to use the switch that came with the lights then there is no need to cut the harness at all.

[@stephenreal2794]

Why am I missing where you hooked anything up to the battery? Does this power by the switch???

[@CUPRADESIGN]

Hey Stephen, the AUX switches are already hooked up to the battery. They literally turn on and off the power. So all you have to do is wire the power wire (red) from what you are hooking up to the AUX switch wire and then the black wire is the ground. They’ve made it so easy using the AUX switches. That’s why you didn’t see me hook up to the battery at all. The AUX wire IS essentially your battery connection hope that makes sense. The AUX connection runs from the battery, and also has its own fuse as well. Thanks for watching, I appreciate it!

[@mikkibakken]

If you have ANY plans of installing options like a winch, air compressor, higher intensity lighting etc, you will want to NOT use the yellow wire, and opt instead maybe for the green wire, which is aux 2. I'm thinking most wouldn't want to go too much farther away than that for something you're going to use that often, but thats just me .

[@CUPRADESIGN]

Yes, when installing, I took that into consideration. I don’t have plans to install a winch or anything like that at this time. If I do determine that I want to, I plan to add quick disconnects to the AUX wires so I can plug and play and move items around quickly and easily if I do choose. But at this time, with the fog lights, ditch lights and light bar, I’m done for now.

[@ryanritchie9455]

perhaps a novice question, but couldn't you connect this to any of the aux switches? Product is 3.6A draw and minimum fuse is 5A (switches 4-6).

[@CUPRADESIGN]

@@ryanritchie9455 - technically you could tie them into AUX 2-6 no problem, they are 15A, 10A, 10A, 10A, 10A. I chose to use AUX switch 1 as it is a) the closest to me, b) the fuse that was on the harness for the Oracle Fog Lights was a 30A fuse, and c) at this time, I don't have plans for anything with a higher draw necessitating the need for that location. That's why I chose the switch I did. I will be adding quick disconnects in the future, should I change my mind!

[@edsmith202]

Will the leds work on one of the four 10 amp switches? Or do we need to use the 30?

[@CUPRADESIGN]

Ed, as I understand it, yes, they will work with the other switches. I didn’t at the time have any plans to add something with larger draw and the fuse in the harness that came with these was a 30A fuse. That’s why I did it this way but from what I’ve read they don’t draw anywhere near that so you should be good.

[@edsmith202]

@@CUPRADESIGN Thanks!

[@CUPRADESIGN]

@@edsmith202 No problem at all! Good luck!

[@Carl-vx9ws]

What’s the amp rating for these lights? I believe Aux 1 is rated for 30 amps and is overkill for this application. 👍🏼✌🏼

[@CUPRADESIGN]

The fuse that came with these lights (which I subsequently cut off) was 30A. Agreed that is overkill in this instance but I don’t currently have any plans for anything rated for that switch, so I chose to wire the fog lights to AUX 1 as that’s the one I’ll use all the time. Ditch lights are on AUX 2 and the light bar is on AUX 3.

[@Carl-vx9ws]

@@CUPRADESIGN That seems odd they included a 30 amp fuse because I subsequently went and looked for specifications on their website; Total Amp Draw: 3.6A @12V DC. That seems to be 7.2A for both, so 10 amp switch would likely be sufficient. Thanks for the content, as this helps me make some decisions. ✌🏼👍🏼

[@CUPRADESIGN]

@@Carl-vx9ws I actually just went out into the garage to confirm. I still have the remnants of the Oracle wiring harness after I cut it off, and also the wiring harness that I cut off from the Lasfit LED Light Bar I installed too (pretty much identical -generic- harnesses) and they BOTH have green 30A fuses in them.

[@georgeniksich1152]

What is purple wire for? Don't get it. Clear as mud.

[@CUPRADESIGN]

The purple wire is the pre installed power wire for the auxiliary switches that sits behind the grill. If you have the auxiliary switches, there are power wires run throughout the vehicle. This meant that I didn't have to run wire all over the engine bay, I could use the wiring that was provided by Ford. You then connect that to the power wire up by the cowl and you have a nice clean installation. This information might help too: www.bronco6g.com/forum/threads/2021-bronco-aux-switches-wiring-diagram-video-discussions.13485/

[@gregrowland2778]

Where does the purple and yellow wire come from?

[@gregrowland2778]

Found it. I assumed the aux switches were 1 wire from switch to a certain location.

[@CUPRADESIGN]

It would be nice if that were the case, but Ford ran ‘pieces’ of wire that you get to join together around the vehicle. Glad you got it taken care of and thank you for watching! I appreciate it!

[@steviehernandez158]

Is that a stock bumper?

[@CUPRADESIGN]

Hey Stevie, it’s an OEM bumper, it is the optional ($800) modular steel bumper available from Ford when ordering. I’ve also got the optional steel bash plates as well.