Avanti dryer blower belt replacement.

It's my first time doing this, I was looking for some videos that could've helped me fixing my Avanti dryer, but I couldn't find any. that's why I took the time to make a video while I was figuring how to fix this, for people like me. I'm not a professional so please bare with me. I hope this help you in any way. Thank you for watching!
Here is where you can get the belt:
www.ebay.com/i...

[@jomiranda2993]

Suleika, I can't thank you enough for this! Here I was, newly single mom, trying to rebuild my life, during covid, and I decided to treat myself to a small dryer to lighten the laundry workload. But the new dryer was defective! Home Depot refused to take it back because they have a 48-hour policy on appliances! As if I had nothing better to do than drop what I was doing in the middle of the week to test it! I feared I had blown a chunk of my savings on something that was supposed to help 😔 Home Depot washed its hands clean, and the manufacturer(Magic Chef) never returned my messages. Google said it sounded like the dryer belt. But your video was the ONLY demo I could find. It gave me the courage to give it a go! I changed the belt 2 months ago, and it's still running. Thanks to your video! Thank you!!!

[@Akielus1987]

I'm glad that my video helped you 😊

[@yarismabaez9289]

​@@Akielus1987 usted me podría decir cuál es el tamaño de la polea de tambor Gracias anticipadas 🙏

[@Akielus1987]

@@yarismabaez9289 tendrías verificar el modelo de la secadora.

[@rubyam1]

Thank you for the video!

[@dclark0426]

Thanks Suleika! I was able to fix my Magic Chef dryer with your help!

[@Akielus1987]

You're welcome! I'm glad my video helped many people 🤗

[@glorialuviano72712]

Hey what was wrong with your magic chef? Mine is moving slow

[@609PEBBLES]

@@glorialuviano72712 hey were u able to fix your dryer mines running slow and not drying the clothes

[@glorialuviano72712]

@@609PEBBLES I did end up fixing the belt. But it broke again. So I had to buy a new machine.

[@Firan25]

Its pretty much the same with a Magic chef dryer except there is 2 extra steps. There is a gray wire going from the bottom of the dryer all the way to the top and connecting to the fan exhaust. At the top it is being held by Zip ties, and at the bottom the wire is tied to the bottom of the metal bar, and other wires with twist ties. To get the belt from the top you have to also take off the clear/white ish vent (only two phillips head screws.) and pull the belt behind it to clear the gray cord. From the bottom its a bit more tricky. You have to undo the twist ties, and then CAREFULLY unplug the gray cord from the mother board looking thing. At which point you can move the wire out of the way for the belt to clear it. Make sure the cord is plugged back into the mother board before you start reassembling things. :)

[@SGarts23]

Thank you so much for these extra steps for the magic chef. I took apart the whole dryer just to get belt on. It broke again the other day so I found this video and your extra instructions and got it done in five minutes!!!! Thank you!!!

[@Leilaniiiiiii]

Thanks to you and Suleika! This video is still helping people - just fixed my Magic Chef dryer today with your help! 😁❤

[@mdluvsjap]

Omg thank you so much! I was able to fix my dryer with this, and this video helped! My dryer sounds like it's Brand New!!! 🎉

[@1kontrabida]

Put some felt where the belt runs through, the noise is coming from the belt slapping the drum, also try to periodically clean the inside area....the weakness of this unit is the motor and capacitors when lint and dust gets inside itll damage the bearing and will seized up, their good units when they work but a PITA to get parts when something happens

[@patsylatimer6995]

I would like to thank you for posting this video. Seeing another woman do it gave me the confidence. I just sat down on the floor and replaced the dryer belt. It was so easy. You did a great job, and appreciate that the video was direct and to the point, not full of a bunch of talking or music. Great video!

[@MPrice510]

Thank you! I have a Avanti Dryer had it for 8 yrs and it stop spinning but still gets hot. So, I guess I have to change the belt. Thank you again for making this video.

[@trewcoulors]

I actually fixed my mini dryer because of your video! I had the belt but didn’t know how to install it. I almost had a guy fix it for 50 bucks. It would have been easy moola for him.......NOT SORRY 😏

[@Akielus1987]

That's great! Keep your money in your pocket 🤗

[@ThatHippyDuck]

ay thank you. the belt that they put in these things is USELESS. it was so torn up and soft , probably purposely.

[@taylorhollins6506]

I need to replace my little foam piece in the back. It’s rubbing away and causing a small tapping/rattling noise.

[@Divergentdesignz]

Me too . Did you find a replacement foam

[@jonbien9068]

Thank you saved me 220 dollars I new mine was not blowing air And I saw your video Bless you.

[@deborahrolle3495]

Lady I cannot thank you enough I didn't even watch no man video I watch how you change it and I did it it made such a difference, my dryer was going so fast now we're going so nice and slow, but it's still not Heating😊

[@Stan-by6rc]

My chef magic belt just came apart also you helped me identify the problem, and how to fix it. Thank You.

[@knight3131]

I have a magic chef and it turns on for 2 - 3 minutes and then it turns off. After 10 -15 minutes it makes the sound to indicate it hs power again. It then repeats over and over again. Do you have any idea what it can be ? When it is on for 2 - 3 minutes it does spin, but when It tuns off nothing works I can;t turn back on. I have to wait for it to turn on by itself.

[@Akielus1987]

Mine used to do the same, it needed a new fan belt because it was "falling" all the time causing the dryer to overheat and keep turning off. I hope this help.

[@DJErnan]

did you ever fix this? have one doing the same thing 🙃

[@veronicacastro9116]

I just want to say a big thank you to you for making this video because you just literally help me fix the belt to my dryer me and my son we did it together so I just wanna comment and say thank you for making this video❤❤❤

[@Akielus1987]

@@veronicacastro9116 you're welcome! I'm glad my video is helping a lot of people 😊

[@dawnstauffer7951]

Is there a video to show how to change the drum belt?

[@ochun57]

Thank you so much for this video. Going to try and do this myself.

[@DRS427]

My foam padding rubbed off. Does anyone know where I can find a replacement? My dryer belt keeps slapping against the drum

[@Divergentdesignz]

Did you find where to order it or how to replace it ?? I am searching for the same thing

[@baitulmuizza4404]

My dryer broke the belting to, and also changed the switch on off.I found your video and it helped. And can save money.Thank you for this video.

[@daveboone7432]

Thank you I thought there was gonna be a lot more work involved than it really is. You made it look easy

[@amtoo2898]

Just rejoined my belt. Couldn't figure out how to put it back until I found this. The join looks strong, I think it will actually work. The process was as follows: cut a piece out of a bully beef can 1 inch by 1 inch. I only had scissors - they worked fine. The can was still a bit fatty -maybe this helped as a release agent. Bring the repair site together. I stitched with dental floss (actually I think this was a waste of time) coil the metal around the belt as well formed and tight as you can - it will be a mould. Hold the metal over a small flame (propane torch in my case). Heat as slowly as you can from all sides making sure to avoid a direct flame on the belt. Only heat the metal SLOWLY. Suddenly it goes liquid. put out the flame. Push together hard until it sets. Peel off the metal. Trim off the ooze - Voila BEAUTIFULL ! You can do what you like - it is strong.

[@THOTH36944]

My belt was a little loose so I twisted it Once to make it a little tighter

[@edwinhamer3319]

THANK YOU!!!! (J on Ed's youtube.)

[@MikeinEtna]

Great video ! Thanks

[@shola7987]

Any info on how to fix scraping noise? My fryer is new and I don't wanna go thru the hassle of returning it.

[@Nicedesk]

You rock! Thank you for taking the time to post this video! Just fyi: removing either the top or bottom screws one set at a time is easier since the drum will still be supported. For example: 1. Remove all screws above the center point of the drum, then install new belt on the top section (loop it over the support). 2. Reinstall all top section screws. 3. Remove bottom section screws, then loop the new belt over the bottom support. 4. Reinstall all bottom section screws. Also here is a link to online printed instructions with picutres and advice: avantidryer.weebly.com/store/c1/Featured_Products.html

[@Akielus1987]

Thank you so much for your advise! 😊

[@TChalla007]

Just what I needed saved me buying another Magic chef dryer.

[@pianoman2781]

Thank you so much for sharing this video. God lead me to you I will say because I have called all around. Certified appliance guys can’t ✌🏼fix a portable dryer and won’t try they say. I lost hope until I found your video

[@19james77]

thanks!

[@ohjustlisa]

I just fixed mines thanks to you.

[@ochun57]

I tried this and I was very successful so happy. Again thank you so much

[@jackyo3.0]

Omg!!! I couldn't find the brand i have but this makes sense with the one i have!!! Thank you!!!

[@morganmccray1889]

IF YOU ARE STILL HERE? YES QUEEN, THANK YOU!!!! GOD BLESS YOU!!!! ❤🎉😇🙌

[@edwinreed9830]

Thanks. Had changed my belt once before but forgot how to slip the belt off.

[@lazarinewyvren]

I'll be doing this Friday, I had an idea how it was gonna go. Thanks for confirming.

[@kathymcmahon9328]

Thank you! So helpful in both your example of how to do it but also empowering me to do it myself.

[@PinkRoseInWinter]

You are a life saver! Bought the replacement belt on Amazon but could not figure out how to install. Thanks to your video the dryer is up and running.

[@monicacrespo409]

Hey would you mind telling which belt you bought in Amazon ? I also gotta get the replacement but idk which one.

[@causeeffect7624]

Placed one on and it popped a week later!!! Need another or is there a way to renew/reattach it?

[@PinkRoseInWinter]

@@causeeffect7624 Mine broke 4 months later. I couldn't see any way to fix a broken one. I rebought the same belt last month and its still working good. I have learned to be careful not to put too much or too heavy of a load in the dryer.

[@ozzygarcia3891]

How do you order the belt. Do you have the part num by any chance 😊

[@btdfw]

You should not have to dismantle the whole drum to put the belt on. Do the top first and slide the belt in and screw the top back into place. Then unscrew the bottom and put the belt into position. It's much easier. But good job.

[@Akielus1987]

Thank you! I'll keep it in mind for next time. 😊

[@btdfw]

@@Akielus1987 no problem! I hope that helps.

[@lalitafaroli]

Thank you sooooo much for this video. This is exactly what I needed to know.😊😊😊😊

[@nvrnever5779]

And you are doing a damn good job is is that the back of it hell I need to follow yours if that's the back because taking it loose on the front looks like a go crazy situation I salute you and congratulate you

[@ianwright5625]

Terrific video. Just a couple of things: It looks like the belt isn't around the centre pulley properly when you put the back on. This would be evident once you turn it on. My advice is to reconnect to mains, without back on, stand back and run for a few moments to ensure belt is running smoothly and air is actually coming out of the fan outlet. Then disconnect from mains and complete reassembly. Also, I don't think you'd want me to 'bare' with you but bear with you I did and found the video great and very helpful. I admire your willingness to have a go. Of course you could fix it - in most cases it's just attitude that stops people. Good on ya! Bye the way, in Australia these are badged as Stirling and sold by Aldi.

[@ianwright5625]

@TheAngryAngelPSN You seem to have some issues! I suggest you read my response without your 'AngryAngel' persona in full flight and see that I've offered some constructive feedback with some very complimentary remarks. Which part of '..and found the video great and very helpful' do you have a problem with? I admire Suleika's endeavour and would encourage her to keep tackling these sorts of challenges. She's clearly smart and perfectly capable of doing all manner of things.

[@ianwright5625]

@TheAngryAngelPSN Another video not necessary as the original was, as I stated in my original comment, a 'Terrific video'. To suggest I was 'crapping' on the video is just silly. End of exchange.

[@PHYLLISBLACKWEL]

And the heroe saves the day thank youuuuuuuuu

[@LexxiLea93]

Hi! I need some help so I hope you see this. My Panda dryer stopped working, I had turned it off & lightly closed it for my husband to put close in once they finished. Then it would stay on for about 5 mins, not heat up and shut off. The heating element in the front gets VERY hot dunning this time. When I opened up the back of the dryer we saw that the "Blue" belt that goes to the bottom right wheel was snapped and just laying there. Would that cause these issues or is that different issue?

[@valeriehuizar5126]

Can someone help me. 😢.. how do you know that you need to replace this part? Mine turns slow now and then eventually turns off😭

[@Leilaniiiiiii]

Thank you!!!!! I just fixed my dryer today with help from this video!! ❤

[@kaheemallah7676]

That clear plastic tube is almost torn in half..is that why my dryer stopped spinning ? Also what is the name of that tube ?

[@brentrussellmn]

Why do these belts break every year? my previous GE minnie dryer I had for 30 years and the belt never broke.

[@dreamerdee86]

What was the issue that led you to replace the belt?? Mine turns on for a few minutes then turns back off and will randomly turn on again for a few minutes then turn back off

[@Lyr1317]

Where did you get the replacement belt and what size is it?

[@deannekliene2673]

I've been afraid drum may hit a wire while loose. knock it loose....I have it unplugged...thanks for doing this!

[@triciacooper9317]

Thank you. Because of your video and one other…I fixed my dryer today. Bless you.

[@darkstaroblivion]

I got mine from a junk pile . All it needed was the fan belt . Oldgoat has fixed a few things in his time Oldgoat loves seeing the ladies be self sufficient and here you is being self sufficient and teaching others That gets a hells yeaaaa 🎉

[@yarismabaez9289]

Hola buenas noches tengo una secadora Avanti y se le daño la correa del tambor y no se ve la numeración alguien podría decirme que tamaño usa por qué lo e buscado en internet y por la marca y no me sale y ordene una pero salió muy grande. Gracias por la ayuda 🙏

[@malayangpilipino4465]

Where can I get and buy the clear blower belt?

[@IEnjoyCreatingVideos]

Great job on the belt replacement :) Thank you for sharing the video with us💖👍😎JP

[@danieltaylor9591]

Is this the same for an equator dryer?

[@TheRealAriahKay]

I did this and my dryer still won’t blow hot

[@christianarmas5008]

Where you get the replacement, ?

[@karinaortiz6725]

Hi. So I just bought this machine but it is extremely loud. 🤭 do you think it could be the belt? Does anybody know if they are supposed to be super loud? I can’t have it all this noise if I’m trying not to let the manager and neighbors know about it! 🙈

[@Akielus1987]

It is a little loud but not to much, I would recommend you to check the belt.

[@kirastar92]

what is the name of that belt?

[@SGarts23]

Thank you so much for this video!!!

[@ashleyforbes8694]

Thanks so much!!! 😊

[@71suns]

Bravo dear girl! You just went for it...and you solved it! Magnificent!

[@Akielus1987]

Thank you!

[@foxybill1836]

You Go Girl!👍👏

[@jennifercastillo8156]

Are all the fan belts the same size ? I have the same problem with my magic chef dryer right now and where do I buy one please and thanks for this video it helped me out a lot

[@Akielus1987]

I really don't know if they are the same, you may have to look up on google the size of the model you have. I bought mine on Ebay.

[@jennifercastillo8156]

Suleika Rodriguez ok thank you

[@monie2887]

Amazon has them

[@BxBayou]

I have my home comfort dryer open right now in the back cause it just stop on me I realized my belt had popped...so I decided to come on youtube to c if anyone had the same problem. What exactly you was experiencing that made u realize u had to change the belt

[@glittersthriftycorner-evy9932]

@@Akielus1987 no they are not the same. You need to look at the sticker located on the side of your panel for the exact measurements.

[@lyndziedwn]

what tool is that and how did you know that’s what needed replaced? mine will work but i have to mess with that little belt first to get it going. it’s driving me nuts and i want to be able to put the back piece back on my dryer.

[@lyndziedwn]

i did get a new belt. 2. that smaller one and the black belt.

[@leescott65]

Hello. May I ask, Where did you buy that belt?

[@Akielus1987]

Hello! Yes, i bought it on ebay.

[@nathalypadilla6429]

@@Akielus1987 hello how are you can you tell me what name you found it I don't found it and I need it please. One question more need to be the same color like clear or can be black or another color

[@cindygonzalez1104]

Do you know where I can buy the wheel that the belt hookinto? or what its called? Mine melted

[@Nicedesk]

That is called a pulley

[@ginapaul5815]

Thank u ❤

[@tarasterling-m6t]

Where did you purchase the new belt?

[@Akielus1987]

Ebay

[@johnnyrod8661]

hi, do you know where can I get the two belts of the PA40sf to replaced them?

[@Akielus1987]

I got them at ebay, but to be honest they're not that great. I would try homedepot or lowells

[@johnnyrod8661]

@@Akielus1987 thanks, do you have the link?

[@mdluvsjap]

Thank you for this video! My transportation band ripped and i ordered what i thought was the right measurement twice, but it didn't fit, i tried a bigger band and now the issue was putting it on, thank you for your video i was able to fix my dryer!! Thank you thank you!

[@maximumautodetailtjp]

Hello thank you so much for your video the belt came in it was tight so I put it in the microwave and it all came out perfect thank you so much

[@fabiiii69]

Thank you! I was so stuck on how I was going to get this piece on until I can across your video 🎉😊

[@rogerdickinson920]

At 1:10 it shows you installing the fan belt. Those 2 middle bracket screws go straight into the back. On mine 4 screws go in thru the side of that longitudinal bar into a bracket in top of the fan tin shroud. Unfortunately, I can't depress the fan enough to get the old belt out. I'm not sure how much the fan can be pushed down without breaking something.

[@ralphclarke4500]

Great job and video. Thanks. You go girl!

[@SofieindependentGreen]

Hi Suleika how are you doing? Hoping all is well with u and family.. i am so happy i found your video been searching for almost a month to find this dryer belt mine has been broken can u please tell where i can purchase belts please and thank you so so very much🙏🏿🙏🏿💚💚

[@Akielus1987]

my best recommendation is go to home depot, the one on eBay is too thick and it’ll keep falling off

[@mark70777]

Thanks Suleika, repaired like a pro!

[@andreaball]

Thanks for this!

[@timrox5626]

Im hearing a knocking sound on mine and it keep going through blower belts fast. This dryer doesnt seem to have rollers though so what is making the sound? Sounds like rocks and clicks ones every rotation

[@Nicedesk]

The blower fan spins on a brass bushing (like a bearing). Over time the grease on the bushing will diminish (maybe 5 years or so). The blower fan will require more effort to turn. This will break the blower belt sooner. You can take apart the blower fan and grease the brass bushing. This will restore easy spinning of the blower fan. If you wait too long to regrease a dry bushing the blower shaft will wear down the bushing and will create play in the assembly.

[@miker.5926]

yassss queen! your bravery will encourage me to open up my dryer. it turns but aint heating up no more.

[@MrBxdon]

Good day I must say I ran into the same problem and almost immediately knew it was the belt but I replaced the belt twice in a year and a half ordered it from eBay the first time and second time I ordered it from eBay and once again I see the way the belts are made must be flimsy because he belts keep stretching out pass the original length I wonder if any store sells them more durable I’m still looking

[@Akielus1987]

I agree, I'm having the same problem.

[@mkfever2005]

does the black foam has replacement? My dryer loose the belt all the time because the foam is no more appear.

[@Akielus1987]

I'm not sure, I'm having the same issue.

[@mkfever2005]

@@Akielus1987 yup. The bell loose so fast than before. So I think is the foam loose and make the bell not stay in place. I can't find any other solution

[@jennycastillo593]

Disculpe amiga yo tengo la misma secadora pero tiene un problema no quiere empezar con el ciclo del secado,calienta pero no gira.A que se puede deber?

[@Akielus1987]

Verificó si la correa no se salió o si rompió?

[@XxchiiqkaxX]

yo tengo una secadora similar es de costway pero rechina antes no lo hacia y me mandaron un video de como arreglarla pero jamas funciono y no se que hacer chilla mucho

[@Akielus1987]

Creo que es algo normal en ese tipo de secadoras, la mía hace mucho ruido.

[@FATMAC_365]

Thanks nice video I didn’t see the small wheel behind the bracket I’m the middle thx

[@Akielus1987]

You're welcome! I'm glad that it helped you.

[@sherryjohnson6779]

The size of the belt

[@raba2d723]

is the 2nd little wheel (the smaller of the two wheels in the bottom right corner that the belt doesn't go around) supposed to spin? Is it's purpose to spin the drum or something? Asking because drum used to spin but then I replace the belt and now the drum won't spin so whats up with that~

[@Akielus1987]

It does, spin. I'm not professional i just changed the fan belt and thought the video could help people with the same problem.

[@Kat2cents]

The drum spinning with those second two wheels is what makes the blower fan spin. She just installed the blow fan belt. You should check the other belt if the drum is not spinning. There is a long belt that wraps around the drum and loops over the other two bottom wheels

[@deannekliene2673]

Did u unplug the fuse wire or unscrew it?

[@Akielus1987]

Yes, i did!

[@Akielus1987]

I unscrew it.

[@jenniferbell2410]

Thank you!

[@Akielus1987]

You're welcome! 🤗