Infiniti Q50 Sequential Mirror Turn Signal Upgrade DIY

[@toasty4000000]

thanks for this, for anyone doing this in future, when removing the mirror cap, start at the tip and then work up a little on the top, then a little on the bottom, so on so forth. Doing just the top first or just the bottom first will probably lead to breaks. I personally don't like the look of the DRL on the mirror so I just did the sequential blinker (which took 20 minutes total, 15 for the first, 5 for the second). Don't even need to do any soldering for that, just clips, screws, and plugs. The puddle light is kinda cool I suppose, but I couldn't decide on if I liked it or not. 1) it's nice for visibility so you don't step in something, but 2) I'm going for a stealthy build on my Q. I decided I was too undecided and therefore it wasn't worth going into the door for me.

[@derekrodriguez7891]

For anyone not getting the drl to work, you have to connect the connector that goes into the window roll mount. You connect that in order for power to go through the door, for some reason it doesn’t work if is not connected. Was stuck for like 2 hours until I figured it out

[@willc2062]

Wish he did an install video for the front bumper sequentials. Camera work was much better than some of the other install videos.

[@SoCalHispanic29]

They look nice but I don’t like the puddle lights staying on at night while driving..I’m not even sure if that’s legal. I think I’m going to buy some some but I’ll wire my puddle lights to my door handle light so it only comes on when I unlock my car door..

[@whiters4002]

Running it for 3 months now and no issues. If this is illegal then the LED bars that lifted trucks use in Texas are definitely illegal lmao

[@xObeyGuz]

SoCal Hispanic what color did you wire your puddle light to? So it’s only on when you unlock the door

[@enzotorres1150]

xObeyGuz I am trying to find out the same thing

[@yazz738]

WhiteRS400 hey where can I find some harness connecters?

[@CHMPro]

It's too dim to be illegal.

[@emil2580]

Can you show how you installed the welcome light kit that lights that’s on the floor under the car

[@davidmata7127]

Comes from factory with the ground lighting

[@isaiahtaylor6173]

Just ordered mine today for my q50 thanks for the info

[@eranhayden6423]

this helped me replace the stock turn signal that i cracked backing up too close to a wall. i was glad that i didn't have to remove the door panel because the stock one just plugs in right there. however, i still broke a clip putting the trim piece back on. once i realized you just line up the clips with the holes and push straight back it was easy. thanks!

[@josegonzalezme]

Where did you buy a stock one at?

[@adolfogarcia1970]

Thanks guys I really appreciate your time effort. I finally did install my as well today . Thank you

[@Marrda]

Alright, so thanks for this. No one else had any info on where to tap in. Now, yall need to do the sequential on the front bumper signals with drl.... please. Then! Go get the phoenix android tesla screen! But wait till the end of yhe year when they come out with the premium model.

[@whiters4002]

Haha if anyone wants to sponsor sequential frosted drl for my front headlights and the tesla head unit we'll make an in depth video!!

[@angelatilano7608]

@@whiters4002 0099

[@MrDokte]

Awesome video! How far are the cameras on the side mirror from the edge of the base? I wonder if the puddle lights glare the 360 camera if it’s on all the time

[@msdeeqfiftee2080]

Would LOVE to do this to mine but it’s a lease, shucks!! Also, LOVE the lighted emblem too

[@jrlopeztz5554]

Car looks sick asf what have y’all upgraded exterior wise ? Besides that

[@willc2062]

Not everyone has the hole in the leather inside the handle. Try using a small Allen wrench to slide along the side and pull from below.

[@CarlosFlores-cu9vo]

Wow no one has ever said look for the white clip on the inside... Thanks!!!

[@sonyabridgewater1995]

Can you show how to install on a Q70 passenger side?

[@JDMHaze]

I have these on my Avalon, the same process, except I ran the puddle lamp to my domelight/courtesy light circuit, and this white light, is ran to a oem switch , That switch is powered by my park light fuse, so It only will be active when my park/head light is on , its on my channel

[@10miguel99]

Great Installation Video! What if I don't want to have the puddle lights to be on at all. I only want the Sequential turn light and the DRLs.The only wires I have to connect are the red, black, and blue wires right?

[@luisiferz]

any updates on this? I also want the sequentials with DRLs, no puddle lights mine should be arriving this Friday

[@quik5ltr]

looks cool.....now let’s see the Bmw limited slip upgrade!

[@ybewiz]

Exactly. That is why I subscribed!

[@patsjoholm]

Way clean. Would be nice option to have Infiniti symbol shine down on the puddle light. Or, is that too 2016?

[@matthewlopez2558]

Can the puddle lamps be wire only to come on when the car Q50 is put into reverse? What wire is that?

[@MrNicoe36cabrio]

This is an awesome mod guys!

[@ybewiz]

Tell us more please

[@acarrs1051]

For some reason after installing these my car keeps dying now. Any clue as to what it could be

[@sikstang02]

Do you know if you can install a separate switch to turn on/off white LED whenever you want? I think those are a bit to bright to be driving in at night

[@whiters4002]

Yes you can definitely wire a separate switch. I thought about doing a soft switch and controlling with my phone as well but honestly they're not very bright in person. Never had any issues with cops or other cars.

[@johnpowers4076]

Damn...I would love some for my G37 coupe.

[@tommytwotone7105]

that would look great on my black 2019 QX50

[@Executiveinvestments-]

nobody cares that you have a cheap car. Stop looking for attention.

[@whiters4002]

The qx50 has the same mirrors I believe so you could probably make it work

[@Awsometiger1011]

Did you tape into the red one for the DRL? In the video it looks like you tapped into two wires but not the red

[@ybewiz]

You are such a PRO! You do most of your work in pajamas, probably even before breakfast. Although, with a growing channel, you need to step your game up. Take pointers from your buddy. BTW, where does your buddy get his manicures? My wife is looking for a good place.

[@RICKSHVACLLC]

Question for you guys, I whenever I connect my driving light wire my puddle light goes out then I'm left with no light, no drl no puddle, but if I remove drl my puddle stays on, do u know what could be causing that? I have it connected where it would be on all the time q50s... Driver side is working fine but the pass side is acting up... No drl, only puddle, connect drl then my puddle goes out leaving me with no light

[@Sliipsy]

I’m confused about the green and black wire, i want sequentials, so what should i do ?

[@derekrodriguez7891]

Just installed mines but for some reason I can turn the puddle lights off by rolling down the windows 💀. Any ideas on that?

[@flipmode00]

Is it possible to upgrade the g37 mirror to the q50 mirrors as an upgrade?

[@_juxie2694]

about how long did it take for some of you so i dont get stuck up for a little more than i think outside in the cold lol

[@leronburshtein9281]

Do you recall what size gauge wire you used to tap the wires into the door wires? My kit came with these little boxes with wires that seem to be a bigger gauge then the ones that are attached to the sequential lights themselves. I need longer wires so wanted to buy some. The wires attached to my sequentials are 24awg but the boxes have a thicker wire (it doesn’t say what gauge they are)

[@badbunnyz8586]

can it be only use while using turn signal then it off whenever we dont use it? and can it be like unlock the car then the light is on?

[@E5mma_combat]

Can you drive with the DRL,s on at night in California

[@TinNguyen-rx3mf]

I have a 18 Q60. Do you know which wires I need to tap into for DRL and puddle lights?

[@nathenoneptoh]

it should be the same. the colors might be different but the position on the harness is the same. watch the video again and you can see which positions the wires are in.

[@toscano4157]

Does it go the exact same way on the q60? Or do is there a slight difference

[@abiramgonzalez1349]

Where did you get your under lights I wanna get some

[@dzachalski]

So cool man. Now I want lol

[@MERCYY69]

Do the drls on the mirror stay on at night when driving with headlights on?

[@noblesseoblige5199]

How's the fitment on this? The one I bought from a different seller fits way too off.

[@bubbie23jw]

Wow I want these for my 37 sport coupe will the wrk

[@whiters4002]

Not sure but I'm sure there are options out there for the Gs, tons of aftermarket on those cars.

[@bubbie23jw]

Thanks

[@LayzeLyfe]

Nice vid.

[@mattygee617]

Does the light stay on ? Or does it shut off when you turn the lights ofd

[@ian.M440]

Nice upgrade 👍

[@ybewiz]

For an emergency vehicle, yes, it is!

[@jeivygarcia3428]

Does he have instagram? I want to see rolling shots of it at night with the puddle lights on

[@rosaliegiannone8700]

How did u get the yellow fogs? Do you have a link ?!?

[@rahnbm]

So when I press the unlock button will it light up sequentially?

[@madcool339]

I have an issue where I’ll lock my car and the mirror lights would still be on the whole time. How do I have them turn off when the car is locked and off?

[@ThaaCrook]

Same thing i thought for me, but after saying screw it ill sort another time it turns out they just take ages to turn off, but they do turn off

[@ayycolton2666]

Nice work, does this guy have a channel or instagram? I wanna check his car out a bit more. Thx

[@Marrda]

In all seriousness, has the housing or plastic turned yellow on your sequentials? Mine have yellowed after a year. Thinking of taking compund and polish to it then waxing them.....

[@thejamaicansenpai1698]

Quick Question what are the wire colors you hooked up in order to have the puddle lights to work on approach or when you open the door? I'm still having the no light issue considering I followed this video step by step. Any help you can give will be great.

[@Marrda]

@@thejamaicansenpai1698 i cant remember its been so long. Just check which wire has power when the car is off. I thought they addressed this in the video, shpuld have a stripe down the side of it. Or go off wire location from the connection point and applu that to your wires from their video

[@henrycerda3246]

Is it possible to tap the puddle lights to the folding feature when you go into reverse?

[@ratioreid343]

Did you ever find out?

[@Awsometiger1011]

is that t taps they gave you ?

[@thatredcam]

Looks like the M4 competition rear tail lights

[@AntioneFreeman]

What’s the reasoning that my sequentials are draining my battery ?

[@hazeblank7441]

do you sell them already done ... so all i gottta do is install ?

[@nelq8186]

I've always wondered if the puddle lights for e90 door handle can be a little more brighter. Like mod wise hmm

[@ybewiz]

That is what I have always wondered as well, always!!

[@JuanCarlos-zc8go]

Can you install this on my Q50?

[@enzotorres1150]

I tapped in the brown to red for the independent puddle lamp but puddle lamps don’t turn on

[@ThaaCrook]

did you ever figure this out? having same issue just installed.

[@dominicanto17dr]

My puddle lamps are not even close to that level of brightness like wtf. I got mine from amazon. The DRLs are fine but they are causing radio static smh

[@gottalovemusic6284]

What state you from. hope you can install this to my Q ^_^

[@jasonpoquee7646]

I tapped into the puddle lights and now my light won’t turn off is it something I need to just within the car settings?

[@chrisgilliam8294]

What did you figure out on this? Just started the install and now my door handle light won't turn off or the interior lights

[@chrisgilliam8294]

@Jeffrey Rubirosa157 What about you Jeffrey? Did you find the problem?

[@Forgedpg]

Trust me. I’ll be okay with 10 mins. All I need.

[@Thesneakerfeen17]

Is removing the door mandatory to install these lights ?

[@Lmaosmd]

Only if u want the drl to work

[@Reyes12620]

Has anyone experienced any electrical issues with these ?

[@whiters4002]

Had it running for almost 3 months now, no issues.

[@Marrda]

@@whiters4002 flickering of puddle lights and dimming when using the window switches

[@enzotorres1150]

My puddle lights will not turn on at all. I tapped in red to brow wire for independent puddle light but I’m not sure what I did wrong. Everything else works

[@ThaaCrook]

@@enzotorres1150 same here, did you find a solution?

[@goldenorp3601]

Would this work on a 2015 v

[@mugz90]

Lol mine came from the factory with the sequential ones I have the infiniti q50s hybrid My vehicle directly from japan

[@Vitalavr4]

Vehicular DIY backlight the rear handles

[@ybewiz]

Drive a tractor trailer, it has all the lights you need. Just messing.

[@Marrda]

SO! i wired mine up the same way, BUT the puddle lights will sometimes partially illuminate. Where 2 will stay on or all will. Especially when i roll the windows up and down. if i flick the window switch it will usually light them all up but sometimes it wont. SO what did i do wrong?

[@thejamaicansenpai1698]

By any chance did you fix this issue? I'm trying to fix the same issue.

[@Marrda]

@@thejamaicansenpai1698 no. Im hoping the new pair i ordered from markie.bang on Instagram will work better

[@danielamezcua5265]

Hey is there anyway you can show me how you wired up? Got confusing

[@slowvr30]

@@Marrda hey did you end up figuring up how to fix this issue? Mine is doing the same exact thing

[@Marrda]

@@slowvr30 negative. I just dealt with it

[@alphav1537]

Does this work for 2015 sport?

[@whiters4002]

Yes it will

[@chrismoscoso2298]

Where did you buy the led front logo of Infiniti

[@dzachalski]

Chris Moscoso Infiniti sells it as a factory plug and play kit - will run you close to 400 bucks for that emblem

[@chigasaki06]

@@dzachalski 400 bucks for something so tacky.

[@calikali8811]

chigasaki06 how is that tacky ? So the Mercedes Benz nightlight logos on the AMGs are tacky too? Lol

[@calikali8811]

chigasaki06 by the way ,That was infintis idea than Mercedes lol

[@chigasaki06]

@@calikali8811 I dont care if its AMG or not. It's hella tacky. To me, being understated is more sophisticated. Those cheesy illuminated emblems screams "looks at me" when the damn car ain't special, lol. Also, its a dumb feature that will burn out....just another unnecessary thing to eventually repair.

[@yazz738]

Where can I get the harness connectors?

[@biggrob33]

Didn't show hazard lights?

[@macturbo1z754]

Is that Hussain at 12:02 ??

[@JoseFernandez-ge9uc]

I need some help. I think i messed up my wires because the "purple" wire for the DRL's now has no current and for some reason the gray wire next to it now has a current. When i try to connect them nothing happens. Additionally my window rolls up only in segments not continuously. Does anyone know a solution?

[@DV8N1]

Curious on follow up resolution to your issue?

[@JoseFernandez-ge9uc]

@@DV8N1 no unfortunately I gave up on resolving it. I might take it into Infiniti dealership.

[@miguel-vx8ew]

@@JoseFernandez-ge9uci’m having the same problem right now any solution?

[@강세신-y8y]

Unlike the video, my car is not wired in order of gray, purple, or brown! Please tell me what the wires are for each color please

[@yazz738]

I can’t not get my drl and puddle lights to work and set up like this I need some connector harness where can I get them or fine them at?

[@larryhooverpedofilekillerc4177]

Hello thank you for being beautiful thank you for being wonderful I hope you have a great day the greatness in you is beautiful. Goodnight.

[@crazymonkey26]

For puddle lights not be on with drl and when approaching the vehicle I Tried connecting: Black to grey Blue to purple Red to brown As per the video however the puddles do not work :-(

[@thejamaicansenpai1698]

Yeah I ran into the same issue. By any chance do you know what the correct color wire to connect for the puddles to work with DRL when approaching?

[@srdesigns1477]

Did you guys find out the correct colors? I’m having the same issue

[@coskyfilms]

I’m having the same issue

[@jsidd4035]

You guys tapping into wrong wire I dont know how they got power from those wire but you should tapping into window switch mail plug and until you dont connect ground puddle light won't work that's what I have learnt from my installation

[@paulo.8085]

Hey fellas, did you guys figure out the puddle light wire? I'm at the same situation right now. I have 2019 q50.

[@rawbert8674]

Where did you get the puddle lights from?

[@kobea8199]

Having same problem mine have 3 wires white red an blue . the blue is in purple an red an grey white is not being used but I tried putting it to the brown an nothing no puddle just the drl

[@NOCallerID00]

@@kobea8199 use zillafull boost channel real fix

[@domv2848]

This video has errors. For those that cannot get your puddle lights to work after following this video here is the fix. To get the puddle lights to work hook the black and white wire to the courtesy lights at the bottom of the door. Q50 2018

[@thejamaicansenpai1698]

Will this work on a 2015? If so I'm fixing it today.

[@paulo.8085]

I just came across this issue too. I'll try the courtesy light. Makes a lot of sense. Q50 2019

[@MK-ut2bj]

To get the puddle lights to work when you unlock the door, follow my post here...www.infinitiq50.org/threads/sequential-turn-signal-lights-drl-puddle-light-kit-for-exterior-mirrors-anyone-install-these.132288/page-7. My screen name is RedSport18. Tapping into the courtesy lights will make the puddle lights come on only when you open the doors and not when just unlocking.

[@98chocalate]

How and where did you get the glowing Infiniti emblem?

[@whiters4002]

It's a factory option on 18+ models. You can find eBay ones as well

[@chigasaki06]

Do you really want it? I know it's subjective, but they're kinda tacky, lol.

[@Marrda]

@@chigasaki06 the mercedes ones for sure look cheap. Ebay ones yellow after awhile. markie.bang sells legit ones that look like the new style, flush and recessed with light behind.

[@blackmob2991]

that's alot of work I think

[@melvinespinal1]

where can i get the led emblem ?

[@DV8N1]

Ebay or Amazon, just search for your model year.

[@Awsometiger1011]

Does he have a youtube channel

[@whiters4002]

I do but I never really post anything.. Haha. Check out my Instagram @majesticq50

[@richardwilliams3839]

Niceeeee

[@mohdyemen]

Does anyone know if these will work on a 2014?

[@jsidd4035]

Yes these will work I have installed on mine but tapping wire from window switch plug not from they did

[@umerashraf6947]

Jag Sidhu hey about the puddle light ? Did you connect it ?

[@CHMPro]

Engineers are on crack. I'd just do the mirror that goes NOT through door but another wire that borrows the same hole to the source. No need for door but hey how would they make money right? if they made it easy?

[@iwatchedthiswhiledoingapoo29]

You

[@ronrendeiro8168]

A 4 door red sport?? Don’t think so. Red Sport = coupe

[@saad3274]

you are dumb they make both

[@sambulucci]

its not a truck dude 😂

[@AntioneFreeman]

What’s the reasoning that my sequential lights are draining my battery ?

[@blake8966]

Would this fit a 2007 Infiniti sedan?

[@yitzykoenig6884]

does the q50 exterior mirror fit on a g37x sedan

[@louie88580]

I believe so

[@christinhedberg6888]

How did you wire your emblem Infiniti light ?

[@Infamoustwin213]

On 2018 and up it comes stock like that

[@AntioneFreeman]

What’s the reasoning that my sequential lights are draining my battery ?