More information and downloads: www.avizstudio....
Пікірлер: 62
@AlexFordv179 жыл бұрын
Massive time saver! Thank you. Few things though... I wish Roof Tiles 3 (Viewport) had some depth to it, rather than a flat polly. Also a great feature for this would of been if you did a lead flashing, that would be a great addition! The script works flawlessly though :)
@alyaakobi3 жыл бұрын
tres bon tutoriel
@lighthousearchiviz29814 жыл бұрын
Thank you very-very much! You make my day.
@maximegaspard71994 жыл бұрын
Hello ! Does anyone know how to break the tiles alignment row by row ? It would be super helpful thank you !
@Danny_Bots5 жыл бұрын
Как он кладет бортики, по видео все очень легко, а на деле все лезет куда угодно и к точкам не вяжется
@하늘여름11 жыл бұрын
Looks very nice!
@guimcast13 жыл бұрын
Loved this! Is there a way to reverse the creation of straight lines created by geometry? Somehow it always goes the wrong way, leaving the butt cut ending where it should have started. I know the right way to create straight lines is to create by clicking and dragging as shown in the video, but it would help so much if we could reverse it, just like reversing splines on railclone or sweep modifier. Thanks!
@AvizStudioTools3 жыл бұрын
If you are using "From roof plane..." option, when selecting roof edges, click closer to the place where you want the first tile to be. The plugin will place the start point of the object to the closest edge vertex.
@terrablader4 жыл бұрын
Another question thankyou. Can you explain the best way to cap after cut option selected. Nothing is capping. And also how about boards around edges how do I do that. Thank you!
@AvizStudioTools4 жыл бұрын
Use "Advanced Tools" > "Region" option to perform boolean operation between the tiles and the region and cap the intersections. You can also use cap holes modifier on top of any ATiles object. The result will depend on your tiles geometry. Use custom tiles for the roof edges: kzbin.info/www/bejne/fYSXd52In7R7q5Y
@adamderita15977 жыл бұрын
thank you,you save my day
@LilChikyChan9 жыл бұрын
I'm having difficulty following what to do. Is there a voiced tutorial anywhere or maybe a step-by-step written tutorial on how to use this?
@AvizStudioTools9 жыл бұрын
There is no audio on this videos. You can read more about each parameter of the script here : www.avizstudio.com/tools/atiles/ There is also downloadable user manual on the page above with even more info. For basic parameters of the script watch this video: kzbin.info/www/bejne/bYHQfWCrnaupl5Y It's for older version but it's easier to follow.
@LilChikyChan9 жыл бұрын
Aviz Studio Tools Thank you. The other video did help. I'm now making roofs for my building! :)
@Rampuniernix9 жыл бұрын
Aviz Studio Tools First thank you very much for this Script! I am having actually one thing that I get really: While creating "A Tiles 2" 2:35, following /(the topcorner tiles) I am not getting these smooth ends like thes are shown as e.g. the pink wireframes in 3:15. My ones are always open like the ones in between .. can u help here? thank you in advance! (sorry for posting here - I cant post in the main comment field actually =(
@AvizStudioTools9 жыл бұрын
Mad Max To get this result use builtin preset - RoofTiles-3, by selecting In Parameters roll-out these settings: - {T} Straight Line Y - {M} RoofTiles-3 Main - {F} RoofTiles-3 First
@Rampuniernix9 жыл бұрын
Aviz Studio Tools ... Thank you very much! - this did it - of course.... I think it´s a lot of pretty stuff inside ATiles, that can do similar things like RailClone might do as well? (for the all mighty-alld-day-purposes.... =) .. I´ll think about the Pro Version (when I´ll get the Job I hope for), since also I experienced, that single Developers also response quite fast when Users are having "problems" with theire Script/Pluggs or have some additional Ideas (like I experienced with the Guy who made this Miauu Tools) thanky a lot - great work!
@vzangel8 жыл бұрын
How do I adjust the tile size? In my case is very big. I managed to adjusting using 3 options; the Offset X and Y, and the Element Scale. But is basically guessing between the three. Is there an easier way?
@atanasbak8 жыл бұрын
Builtin tiles are in centimeters, set Scale Local X, Y and Z to value that correspond to your working units. If you are working in meters this value should be: 0.01. By modifying Local X Y Z scale you don't have to adjust the offset of the elements.
@vzangel8 жыл бұрын
Atanas Bakardzhiev Thanks!
@9007487865 жыл бұрын
awesome!
@Paul-gv4zw7 жыл бұрын
Один раз как то случайно у меня получилось.
@supasuoasuoasupa19393 жыл бұрын
Hello Aviz, whats the different between the free and pro version?
@AvizStudioTools2 жыл бұрын
A few more functions and parameters to set if you need to speed up your work.
@gro3d11 жыл бұрын
awesome script!!!
@phlagunilahiri87985 жыл бұрын
can i use this in 3d studio max 2017?? or i have to use in lower verson???
@AvizStudioTools5 жыл бұрын
ATiles works with all current versions of 3ds Max.
@alvstel3 жыл бұрын
Hi Does this work in max 2020? thanks!
@AvizStudioTools3 жыл бұрын
Yes, works with all current 3ds Max versions including: 2020, 2021, 2022.
@terrablader4 жыл бұрын
its not snapping to corners i have vertex snap on.. I can snap other things but not with the plugin open
@AvizStudioTools4 жыл бұрын
To snap at angle hold Alt key on the keyboard while selecting the third point: kzbin.info/www/bejne/o4q0ao2ojbN5n8U With the Pro version you can use create from roof plane function: kzbin.info/www/bejne/ZoHFeqB7aautsKs
@terrablader4 жыл бұрын
@@AvizStudioTools thanks for quick reply will try i have pro ver.
@terrablader4 жыл бұрын
@@AvizStudioTools holding alt still no + appears on geometry for the first snap, to show me a snap, 3d snaps vert on
@AvizStudioTools4 жыл бұрын
@@terrablader Hold Alt only for 3th snap and move the mouse to select different verts.
@AAAAAAndreyAndreev4 жыл бұрын
is this fine for max 2021
@AvizStudioTools4 жыл бұрын
Yes.
@jeffalonso017 жыл бұрын
WHERE CAN I FIND THE TEXTURE THAT YOU USE IN THIS VIDEO? THANK U
@atanasbak7 жыл бұрын
There are no textures, only multi materials with sub-materials, each with different diffuse color.
@jeffalonso017 жыл бұрын
great thank u for the answer ;)
@2herzog7 жыл бұрын
so hard to use
@Ivan_Mitov7 жыл бұрын
My thought when I first tried it but after 15-30 minutes of tinkering I learned how it works. Give it a try, you won't regret it. Adding roof tiles now takes me only fraction of the time it used to.
@phlagunilahiri87985 жыл бұрын
its not snapping with the object please help me.
@AvizStudioTools5 жыл бұрын
To control the tilt angle when creating ATiles object - Turn on 3D snap. While picking third point hold ALT to automatically change the tilt angle base on the snapping point, hold SHIFT if you want the tilt angle to be set to zero. Make sure Count Y or Z is set to zero, otherwise script will not ask user for third point.
@MahmoodInteriordesigner0075 жыл бұрын
Plz sir How Downlod
@raniaelkerdany81384 жыл бұрын
every time i try to download a troubleshoot appears this site cant be reached any recommendations
@AvizStudioTools4 жыл бұрын
Try using different browser with option to allow redirect links. We are working on new storage solution for our free tools.
@AvizStudioTools4 жыл бұрын
The links on our website are updated with direct links to the free versions of out tools. Let us know if you still having problems downloading the zip files.
@baseldamas61663 жыл бұрын
doesn't work for max2019
@AvizStudioTools3 жыл бұрын
The plugin is working with all versions from 3ds Max 7 to 3ds Max 2022. You may need to scroll down to the bottom of first dropdown in the create tab to find Avizstudio Tools option.
@Kot_stepan_8 жыл бұрын
почему без звука?
@evrenfenerli5 жыл бұрын
i cant snapping the roof
@AvizStudioTools5 жыл бұрын
Turn on 3D snap(vertex) and hold alt key.
@MahmoodInteriordesigner0075 жыл бұрын
How To Downlod
@AvizStudioTools5 жыл бұрын
www.avizstudio.com/tools/atiles/
@deuksooseo4 жыл бұрын
It looks easy to see but it's too hard to use
@AvizStudioTools4 жыл бұрын
Hi, what is the most difficult part for you when using the plugin? Once you get use to all of the parameters it will get easier.
@AvizStudioTools4 жыл бұрын
@@deuksooseo Did you try 3D snap and holding Alt key when selecting 3-th point?
@MahmoodInteriordesigner0075 жыл бұрын
Tools Nane Sir....
@punnenthomas7 жыл бұрын
very hard tool to use... looks good in video but....
@AvizStudioTools7 жыл бұрын
Give it an hour or two to get use with the interface. You can check all videos for ATiles here: kzbin.info/aero/PL8D8CF452C78E9E40 and all ATiles quick tips videos here: kzbin.info/aero/PLE5GkG6aEfdrY1RS6bIZ_Pl9v9N8wHmrg We sent a reply to your question to your email.