Avoid these 3 IKEA Kitchen Layout Plan mistakes

📏 Avoid these 3 IKEA Kitchen Layout Plan mistakes 📏
Don't let your kitchen dreams come crashing down! This comprehensive guide unveils the secrets to a trouble-free IKEA kitchen layout plan. Whether you're a DIY enthusiast or a seasoned renovator, these valuable tips will ensure your kitchen project is a resounding success.
🕒 Timestamps:
- 00:00 Introduction
- 01:30 The importance of correct measurements
- 05:49 Tools Needed
- 08:26 Print square Grid Paper; you're welcome
- 08:41 Making Sketches like a champ
- 11:55 Check #1: The Ceiling
- 15:55 Check #2: The Corners
- 21:10 Check #3: The Walls
- 24:03 Final Words
📺 Watch now to avoid common measurement pitfalls and create a flawless kitchen layout: / @kitchensbyrannes
In this video, we go beyond the basics, armed with a tape measure, a laser level, and other essential tools. We dive into the nitty-gritty of kitchen measurements, ensuring your project starts on the right foot.
Discover how to:
- ✔️ Accurately measure distances
- 🏡 Identify sagging ceilings
- 🔲 Check the plumbness of your walls
Plus, find a link in the video for extra resources and square grid paper for your measurements: kitchensbyrannes.com/taking-m...
Embark on your IKEA kitchen layout plan with confidence. Click play now to avoid the 3 common measurement mistakes!
📺 Related Videos:
1. • Install IKEA MAXIMERA ...
2. • How to Create a Custom...
3. • How to Assemble IKEA K...
❤️ 🔎📐💡✏️📏🗓️🔎📐💡✏️📏❤️🗓️🔎📐💡✏️
DID THIS VIDEO ADD ANY VALUE TO YOUR INSTALLATION❓
If it did, please consider sharing some love ❤️and appreciation 🙏with me right here:
kitchensbyrannes.com/product/...
ARE YOU IN THE PLANNING STAGE OF YOUR NEW KITCHEN❓
Making sure your plan is installable could save you a lot of headaches later.
I am here to help: kitchensbyrannes.com/ikea-kit...
TOOLS 🪛🔨 🪚
#CommissionsEarned
MY AMAZON STORE: amzn.to/3wcbdGL
My Power Tool line-up: amzn.to/3UvdkPA
My Tool Storage System: amzn.to/3UtVfRT
My Small Tools: amzn.to/3Uc9TeZ
Extra materials needed for a complete Ikea kitchen installation: amzn.to/44a5KNe
Screws and Anchors for Suspension Rails: amzn.to/3Ur9Jls
Please note: As an Amazon Associate, I earn a commission from qualifying purchases at no cost to you.
#Ikea #ikeahacks #ikeakitchen #kitchenlayout

[@veroandariega]

Wow. I had no clue the corners were so important! I'm taking notes so I won't forget 😅. Thank you!

[@kitchensbyrannes]

Very soon, you'll be the expert around here 🙂

[@Strongasmeat]

Great video Rannes, we're starting ours in a couple of weeks, i'll be sure to rewatch

[@kitchensbyrannes]

You're welcome. Good luck with your installation.

[@sebastian.gallego]

excellent video !!! thanks

[@kitchensbyrannes]

I'm glad you liked it, thank you.

[@mussimike]

Thank you, you cover the details that just wouldn’t occur to me. Just an idea, IKEA also popular in the EU, I know it’s probably a pain but some metric conversions on the more crucial measurements would be helpful.

[@kitchensbyrannes]

Thank you for your comment. Yes, you're right. As a minimum, I could add the metric value as text for the essential measurements. As a European myself, I had a hard time dealing with inches when I came to Canada 10 years ago but now it's the centimeters that's giving me troubles when it comes to Ikea cabinet sizes 🤔🫢 Thank you for bringing this up.

[@harrycopeland8322]

You said to start installation from the wall. A problem I had with that was that I was fitting cabinets between a window and a wall. I was installing base and wall cabinets and it was always planned to use a 50mm filler on both sets of cabinets at the adjoining wall because of a base cabinet drawer at that end. The adjoining walls were not square and the wall at the start point was not plumb (3 mm variation at 1 mtr high & ~ 7mm at 2 mtr). So I had to begin at the window and work back. The filler ended up being 68mm at floor level and ~ 75mm at the top of the wall cabinets. By starting at the window the out of square wall was not an issue because the benchtop hid the error. This emphasises the need to check and recheck wall variations

[@kitchensbyrannes]

You said. Check, check, check. Evaluate. Execute.

[@sandra9269]

Which space do you leave for a 30'' stove (range) ? Someone suggested me to leave 30-1/2'' between cabinets and have countertop overhang 1/8'' on both sides, leaving a net opening of 30-1/4'' ...

[@kitchensbyrannes]

Yes, I do exactly the same in most cases.

[@harrycopeland8322]

In regard to the mounting rail and installing multiple wall cabinets, in Australia wall stud widths are 450mm but the IKEA securing recommendation is 300mm. If the rail is secured at three or more points at studs along that rail, the vertical load on the rail at the studs, using long screws should be sufficient to support the weight of the cabinets. Using high quality drywall anchors mid-way between the studs (at 225mm) would be sufficient to prevent the rail from twisting, without imposing additional vertical load on the rail. Would you agree?

[@kitchensbyrannes]

I agree, but I'm not picking up liability 🤣

[@harrycopeland8322]

@@kitchensbyrannes no I wouldn’t expect you to.

[@sandra9269]

With a 36'' wide fridge, which is actually 35-7/8, do you install the fridge cover panels directly against the fridge's upper 36'' cabinet, creating a 36'' space? Or is it necessary to add one (or two) side panel to that upper cabinet, creating a 36-1/2 (or 37'') space for the fridge?

[@kitchensbyrannes]

Yes, in most cases I add the fridge panels directly to the 36" wide cabinets. If the floor isn't horizontal, it can be a challenge getting the fridge in there though as it will be leaning to the side. I always find it more difficult to secure a panel with a free side to the cabinet if there's a ½" panel in between as my normal goto choice of screws (from Ikea) are too short. If there's high cabinets on both sides, adding a ½" panel between the fridge cabinet and the bigger panels is a lot easier as you can predrill and screw all the way into the adjacent cabinet wall. I hope all this makes some kind of sense 🤔

[@sandra9269]

@@kitchensbyrannes Thanks. I'm not sure to understand why the length of screws is a factor; what prevents to simply use longer screws?

[@kitchensbyrannes]

True, that's the way. It shouldn't be an issue but somehow I feel I get a better hold between a cabinet and the panel compared to a cabinet and the panel with an extra panel in between.

[@Yorkshiremadmick]

This just proves to me Ikea took an easy way out on designing their method of installation. The same method as assembly of their flat pack units. Houses especially in the UK are not built to these strict standards.

[@kitchensbyrannes]

In my opinion, Ikea would install it for you, than you doing it yourself 😉

[@giseliapereira5914]

Well here I am stressing after going downstairs to check if the corners of my walls are square. I have two 38” corner cabinets and my corners aren’t square. One corner is about 1/2” off and that is the side that joins other cabinets. Lord give me strength.

[@kitchensbyrannes]

Oh, than s challenge. Keywords are "dishwasher" and "shims".

[@giseliapereira5914]

@@kitchensbyrannes I looked you up and unfortunately you’re 4 hours away or I would hire you. Yes I know about the shims can you elaborate on the dishwasher please?

[@kitchensbyrannes]

If you have a dishwasher next to the corner cabinet, the opening for it can "absorb" some of the problem as the dishwasher space could be slightly smaller at the back than the 24" you need at the front. If you measure the width of your dishwasher at the back, you'll see that's probably at least ½" less wide than at the front.

[@giseliapereira5914]

@@kitchensbyrannes Thank you. Wish me luck!

[@kitchensbyrannes]

You got this 👍