Awesome Biomass Tree Chipper - CH885 Dynamic (ConeHead)

Only 700hp but it chips like it had 850hp! Watch the vertical rollers funnel the branches in, and snap forks & crotches.

[@richardgrumpywelsh2485]

This chipper is the best one I have seen, It would have been better if the video showed other views

[@CHARLES202able]

3:55 good sound

[@richardgrumpywelsh2485]

This is one hungry machine, really eats up the trees

[@poisonwater7241]

NOW THAT'S A WOOD EATING MACHINE!

[@raymondcote6669]

Show the rest of the scene. Chips being blown. Trees being picked up by grapple. I hear voices so someone there could have moved the damn camera once in a while

[@covagscarl9744]

Move the camera, please. Show the entire process, not only the first step.

[@hossameldenebrahim6466]

where is the product

[@jakobschmitz9382]

Futeehhz

[@steves2956]

Wood is not carbon neutral. Wood is basically carbon and over time under pressure it turns into coal which is high carbon, so no, wood is not carbon neutral.

[@bill45colt]

those are horizontal rollers not vertical,,,,someone missed grammar school geometry

[@nonyerbidness475]

They're hard to see but it also has vertical rollers in front of the horizontal feedwheel. The box above the upper infeed deflect houses two planetary motors. We only made two of them. Dynamic sold the patent to Barko then Barko changed them so much they priced themselves out of market competition. It was originally a very simple workhorse that performed as it should.

[@martinehlert4196]

Can cut to 1 minute

[@user-ei4rb6sd7t]

Чувствуешь мощь бесконечную?!

[@jamescarter1500]

That's weak! I got a little 760hp Peterson that will blow about 28 tons in about 16 minutes. Producing a 1/4 Inch chip(sawdust)

[@nonyerbidness475]

Peterson makes a nice machine. Dynamic liked the sloped infeed that Peterson has so that's why they set this up the same. This machine will fill a 55' trailer in 12 to 20 minutes depending on what you're feeding it. Pine vs oak = big difference. This had a size range from 1/4" to 1 3/8" chip size. It uses simple shims to change chip size.

[@JanErikWeijnblad]

Amatör kamera

[@zibisbiegienius3065]

very boring