As a tool maker you are asking a fair price for quality workmanship!!
@BertsCustomCuts Жыл бұрын
Thanks
@InTheWoodyard Жыл бұрын
Thanks!
@user-st7sz6xg2c Жыл бұрын
Great product idea! You turned me onto the dremel and its been a life changer!
@InTheWoodyard Жыл бұрын
That is great! thanks!
@stevenbrown521010 ай бұрын
Me too. Battery powered Dremel works great
@Dorchwoods Жыл бұрын
I'll 100% buy one! That is an awesome little vise. I can't attend the Paul bunyon show but I'd still like to buy one. Let me know the best way!
@InTheWoodyard Жыл бұрын
thanks, just email me at chrisinthewoodyard@gmail.com
@Dorchwoods Жыл бұрын
@@InTheWoodyard done!
@barrychambers404711 ай бұрын
Like it! Thanks! When I was in high school metal shop we were taught to keep our files chalked. A stick of chalk rubbed into the file surface keeps your file from loading up with debris, and keeps your file feeling nice and sharp. Works good for any shaped file.
@InTheWoodyard11 ай бұрын
Great tip! Thanks!
@raystormont Жыл бұрын
I can't thank you enough since you showed me this easy way to sharpen how much easier it's to quickly sharpen a saw. Better and faster than hand and it's easy to keep angle steady. Ray Stormont
@InTheWoodyard Жыл бұрын
That is awesome Ray!
@hardworkingmanoutdoors11 ай бұрын
Nice looking build! Definitely looks better made than the stump vise. I have one of those as well that I rarely ever use.
@BertsCustomCuts11 ай бұрын
I bet you would use one of these.
@hardworkingmanoutdoors11 ай бұрын
@@BertsCustomCuts definitely nicer than the stump vice I have now!
@InTheWoodyard11 ай бұрын
Yup!
@InTheWoodyard11 ай бұрын
Heath...you NEED one! Buy it for Rachel for her birthday!
@hardworkingmanoutdoors11 ай бұрын
@@InTheWoodyard I’m thinking about buying her a mini excavator 😂.
@davidedwards3734 Жыл бұрын
Id purchase one!! My stump vise is in the garage!! Doesn't get used, tried it once at the house too heavy to carry!! Stay Hydrated and Have a Safe Day
@InTheWoodyard Жыл бұрын
email me at chrisinthewoodyard@gmail.com
@michaeljheinz3336 Жыл бұрын
Looks like a fantastic tool for out in the field Chris. Well done.
@InTheWoodyard Жыл бұрын
Thanks!
@BertsCustomCuts Жыл бұрын
Thanks
@briannelson4493 Жыл бұрын
Chris you and Bert are on to something here. I wish I could have been there. Keep on cutting
@BertsCustomCuts Жыл бұрын
This is version 2.0. The first one didn't have a base, and it was a little wobbly.
@InTheWoodyard Жыл бұрын
thanks!
@geezerindawoods11 ай бұрын
You is the Bob Villa of sharping! Well Dun!!
@InTheWoodyard11 ай бұрын
Ha! Thanks!!
@loodusefilm788111 ай бұрын
That should have In The Woodyard logo burnt in with CNC woodburner! Would be great merch. Great video!
@InTheWoodyard11 ай бұрын
Yup, I have thought of that too!
@saltrock9642 Жыл бұрын
Mornin Y’all! Cool tool.
@InTheWoodyard Жыл бұрын
thanks!
@BertsCustomCuts Жыл бұрын
Thanks
@noel3065 Жыл бұрын
I'm glad to hear your going to Bunyan. Now my list is complete of the youtubers I want to meet. Thank you and yes I've always wanted to get one of those tools but just didn't get around to it yet.
@InTheWoodyard11 ай бұрын
We will see you there!
@GregPrince-io1cb Жыл бұрын
Good Morning Woodhounds!! 52°F and 97% humidity here in Central Ohio!! 84° high Tday according to Weather Guessers!! have a great day Folks!
@saltrock9642 Жыл бұрын
Here in East Feliciana parish, La. its currently 66 with a predicted high of 92 and no rain in sight. Still waiting on the “Big Change” to finally get here.
@InTheWoodyard Жыл бұрын
Good morning!
@InTheWoodyard Жыл бұрын
that is way to hot!
@LogCabinFirewood10 ай бұрын
This is the best little chainsaw vice money can buy 💪💪 perfect to take along with ya for tailgate sharpening sessions 🤘🤘 I love mine!!!!!
@InTheWoodyard10 ай бұрын
Thanks so much!!!
@ronskancke148910 ай бұрын
Back when hand saws were in common use they made several different vices far better than that one. I have several of them. I still just put my saw on my tailgate , mark my starting tooth with a sharpie and use my electric sharpener powered off a lawn mower battery. Takes about 5 minutes. The dreamed may be ok but the ones made for sharpening Chain saws have a plate that shows the proper 30° angle. Beats that dreamed all to hell.
@digger0429 Жыл бұрын
Looks good you'll sell them thanks for sharing
@InTheWoodyard Жыл бұрын
Thanks!
@craigwilson956011 ай бұрын
That is great craftsmanship! I need one of those bench vise. I will email you Chris. I will not be at Paul Bunyan! I need this this past weekend when i was hitting wire, insulators and concrete in a tree.
@InTheWoodyard11 ай бұрын
Thanks Craig!
@craigwilson956011 ай бұрын
You are welcome!
@PappyP34511 ай бұрын
Great looking tool. I'll be keeping my eyes out, hope you have more I'd like to get one!
@InTheWoodyard11 ай бұрын
If you want one juse email me at chrisinthewoodyard @gmail.com and we can get you on the list. A new batch will be made soon!
@johnphillips770 Жыл бұрын
Well I for sure am interested in one
@InTheWoodyard Жыл бұрын
email me at chrisinthewoodyard@gmail.com
@BertsCustomCuts Жыл бұрын
There is a video on my channel doing the machining work on them.
@Andrew_From_NB11 ай бұрын
Awesome vid that day Chris! Really like the new saw vice!! 🔥💯👍. See you soon! Andrew from NB :)
@InTheWoodyard11 ай бұрын
Thanks 👍
@stevezelen4651 Жыл бұрын
I just told (asked) my wife we are going on Sunday!! Be sure to stop by Old Dayton Pizza on the way there. You can check out our modest wood yard. We keep our fire pit burning every minute we’re open (closed Sunday and Monday). It’s only a couple of minutes off the both interstates. 70 and 75 in Dayton!! I think taking pre orders before spending the time and money is the way to go.!! Thanks Chris!!
@InTheWoodyard11 ай бұрын
Sounds great, I hope to see you there!
@samskeeter1 Жыл бұрын
Nicely made little bar vice.
@BertsCustomCuts Жыл бұрын
Thanks
@InTheWoodyard11 ай бұрын
Yup, thanks!
@noelstractors-firewood5711 ай бұрын
Nice chainsaw holding device. I like the dremial tool too. But I still handfile. I do have a dremial tool and stones and I did try it, but I still hand file. I think, if I did more dremial tool use I’d get use to it and maybe use it more. Have a great day.
@InTheWoodyard11 ай бұрын
Yup, like everything the more you do it the better you get at a thing!
@JohnSaylock-ec4cd4 ай бұрын
I carry three chains heading out to do the dirty....I modified a cheep harbor freight sharpener to force it to do its job. Works great.
@InTheWoodyard4 ай бұрын
nice.
@waynetharp Жыл бұрын
Nice!! They should have Bert or the Farm logo on the other side!🤠
@InTheWoodyard Жыл бұрын
maybe, but everything we do to it adds cost too.
@DanielAtkinsFirewood Жыл бұрын
What a neat tool. I will order one for sure.. FINALLY something we can purchase with the channel logo 😁👍
@InTheWoodyard Жыл бұрын
We will have another production run in the future with pre-orders probably.Thanks Daniel!
@unclev7075 Жыл бұрын
Congrats on the new tool!
@InTheWoodyard Жыл бұрын
thanks!
@BertsCustomCuts Жыл бұрын
Thanks
@inthebackyardwithdel438 Жыл бұрын
Hey Chris , I’m very interested in getting one of the vises . See you at the show !!!! 👍🏻🇺🇸
@InTheWoodyard Жыл бұрын
Sounds good. Thanks!
@rjh63807 ай бұрын
I just took my stump vise and pounded it into a treated 2x8x20, but good for you thinking creatively. Good luck with your venture.
@InTheWoodyard7 ай бұрын
Thanks!
@toddsoutsideagain Жыл бұрын
Great little tailgate saw holder! I’m glad you finally let the cat out of the bag. I have been waiting on this reveal since HFH😂 I’m sure you will sell them all in no time Sir Chris👍🏻👍🏻GNI
@BertsCustomCuts Жыл бұрын
We wanted to do some testing and made some changes since the first trial ones we made.
@InTheWoodyard Жыл бұрын
Thanks Todd!
@ethanpemberton9011 Жыл бұрын
Looks like a well machined piece. I wont be there til saturday. I bet they sell fast.
@InTheWoodyard Жыл бұрын
Great I hope to see you there!
@BertsCustomCuts Жыл бұрын
Thanks
@kurtloftfield4537 Жыл бұрын
Good morning all!
@InTheWoodyard Жыл бұрын
hello Kurt!
@GaryUlrich-s3r8 ай бұрын
Ok, after watching the video I need one for sure. This would make sharpening so much easier. Can I be put on the list for one as soon as possible?
@InTheWoodyard8 ай бұрын
Absolutely! Just email me at chrisinthewoodyard@gmail.com and I will put you on the list...THANKS!
@bthom70 Жыл бұрын
I'd like 1, hope be able to make round 2.
@InTheWoodyard11 ай бұрын
Then you need to email us to be put on the list...maryinthewoodyard@gmail.com Thanks!
@TonysCoolTools Жыл бұрын
Great idea Bert came up with (wink, wink) I don’t see how any Woodhound can be be without one. These will be worth some money one day as a collectors item. 👍TCT
@BertsCustomCuts Жыл бұрын
Mabey the tool man will have to get one for product testing.
@rickthelian2215 Жыл бұрын
You’ll need to do an independent review on this new Tool😉😀🇦🇺
@rickthelian2215 Жыл бұрын
Tony are you going to this upcoming show, I see many wood personal are attending?
@InTheWoodyard Жыл бұрын
Collectors items? I hope not, they are meant to be used!
@InTheWoodyard Жыл бұрын
We will all be there!
@jameschandler2776 Жыл бұрын
Like you, I bought a stump vise and never used it. I also do my work on the truck bed.
@InTheWoodyard11 ай бұрын
Right on, me too!
@larryvankirk742311 ай бұрын
Nice video/bar vice Chris. Bert did a nice job with this. I will consider adding this to my collection of firewood accessories. I'll not be at Paul Bunyan this year as I used my "bucket list" budget to visit "field of dreams movie site" with my son & daughter this week. GNI
@InTheWoodyard11 ай бұрын
Thanks Larry!
@brentsmith2384 Жыл бұрын
Great idea for sharpening.i lay my bar across a flat ,split piece of wood.but I think I will look into making 1 similar to yours
@InTheWoodyard11 ай бұрын
ok
@artofogre3555 Жыл бұрын
Lol, not even 3 min in there is a lumber jack having an aneurysm over this video. 😂 So many sparks, it was like a mini 4th of July.
@InTheWoodyard11 ай бұрын
Yup, some people get excited easily!
@johnsonr910 ай бұрын
Great tips. Thanks!
@InTheWoodyard10 ай бұрын
Glad it was helpful!
@coreyriley7160 Жыл бұрын
G’morning Chris. Most awesomest vice. Thank you for always ‘splaining things for us. I will definitely buy a bar vice from you !! I’ll bother you long enough until you cave. GoodNightIrene
@InTheWoodyard Жыл бұрын
We will make sure to get one made for you too!
@hubertyoung1938 Жыл бұрын
I like the fact that the clamp is deep enough so when you place the bar in it, you don't have to play around so the chain teeth don't touch the bottom. For the black clamp, you have to play around and adjust, and the screw clap isn't very good.
@BertsCustomCuts Жыл бұрын
It was made with small saws in mind too. The only time you may have to hold up some if long bar that is nose heavy and back of saw lifts up.
@InTheWoodyard11 ай бұрын
Yup, it works great!
@InTheWoodyard11 ай бұрын
yup!
@stannelson2582 Жыл бұрын
I like the work station. I have a board mounted across the rack on the Quad. I use a C clamp. Handle c clamped to the board.
@InTheWoodyard Жыл бұрын
thanks!
@hp1468 Жыл бұрын
I'm wondering how many times can you sharpen the chain with a dremel tool before the teeth are gone? I usually sharp the chain by hand cca 5-7 times before I get it sharpened by a machine (max 3 machine sharpening...it takes off a lot of material)
@InTheWoodyard Жыл бұрын
Same as a file, it depends on how messed up they are.
@9.16TreeService11 ай бұрын
This is a funny question, heard many times that sharpening a saw this way reduces the life of the edge, Is this true? If not yeah this is definitely the way to do it! 👍🏼
@InTheWoodyard11 ай бұрын
Not at all. I have been doing it with a Dremel and Oregon bit now for years, never had a problem.
@tyharland1906 Жыл бұрын
I've messed around with those stump vises, I think they work great but I'm never far from the truck.i do have trouble keeping track of them though, my wood truck tends to get...congested towards the end of saw season. I'm gonna pull the trigger on a dremel, probably the way to go.have a good day
@InTheWoodyard11 ай бұрын
Right on! Go for it!
@fergusonto-203211 ай бұрын
Great information , I think you’ve changed my chain saw sharpening technique , I won’t be able to make it to the show so is there anyway to get the bracket that holds the saw ? If so let me know , thank you .
@InTheWoodyard11 ай бұрын
Yes we are going to make another batch soon...EMAIL me at chrisinthewoodyard@gmail.com and we can get you on the list. THANKS!!
@Smokey66s10 ай бұрын
“ChainMeister”, now defunct, made a similar vise, also I seen a KZbin video where a guy cut spikes off of “stump vise” bolted it to a piece of angle iron and drilled a couple of screw down holes in other wing of angle iron. A diy version of your very nice fabrication.
@InTheWoodyard10 ай бұрын
Thanks for the info!
@briangleason4435 Жыл бұрын
Great idea!
@InTheWoodyard Жыл бұрын
Glad you think so!
@tomcarpenter603611 ай бұрын
What are those curb feelers mounted on the handle of his saw?
@InTheWoodyard11 ай бұрын
They are zip ties or cable ties that make my cuts for rounds to 16". I have several videos on how to make them work on my channel with another 1200 videos waiting for you to watch right now.
@kaitlynlsari681 Жыл бұрын
Hi Chris and guys, actually this one surprised me. Loggers and firewood cutters in New Zealand have been using something similar for years, the end looks like a small log dog with a small bar vice attached that you hammer into a log or stump to sharpen in the field 🤷👍 it seems lighter than the one you showed, that one looks heavy😆 but i guess if you're happy with a tailgate vice then you're happy 😂 GNI
@InTheWoodyard Жыл бұрын
Yes I have one , never used it just like I said in the video. I like to sharpen on the tail gate most of the time.
@mountaintopoutdoors Жыл бұрын
Did Husqvarna make a new concrete saw. Hahaha. Nice set up Chris. Love the logo on the vise. See ya at the show. Stop by at the eastonmade tent. We have something for you and Kenny
@BertsCustomCuts Жыл бұрын
See you at Bunyan
@InTheWoodyard11 ай бұрын
Thanks Jeff!
@stevethiel5838 Жыл бұрын
Are you going to be in one specific spot at the Paul Bunyan show? Hope to see you there. Vice looks like would be very helpful for sharpening chain.
@InTheWoodyard Жыл бұрын
No, but I will spend a bunch of time at the Eastonmade booth and the Husqvarna booth mid days.
@roncaron-l1r Жыл бұрын
Good morning Chris I like your new tool for chainsaw love it 100% buy one but I live in Kapuskasing Ontario good video ( ty Ron
@InTheWoodyard Жыл бұрын
you can order one, just email me at chrisinthewoodyard@gmail.com
@kugeldrechsler8664 ай бұрын
hi guys, i always set down the rakers first BEFORE grinding the cutting teeth! You often have touched the tooth Führung edge during file-stroke 😣!!
@InTheWoodyard4 ай бұрын
Great tip! I use a smooth edge flat file and have not had any problems so far???
@paulkiehne7618 Жыл бұрын
Have watched 4 videos this morning everyone is saying go to Bunyan show but no one says where it is
@InTheWoodyard Жыл бұрын
Ohio next week Friday-Sunday , you might want to google it.
@BertsCustomCuts Жыл бұрын
Its by Cambridge Ohio
@jamesbuchanan7088 Жыл бұрын
Good morning
@InTheWoodyard Жыл бұрын
hello!
@derek184311 ай бұрын
I like the vise, Dremel with the battery pack is ok (everyone has different needs), but please use a proper depth gauge. Your saw will cut much better. It's worth the less than ten bucks to have your rakers correct.
@InTheWoodyard11 ай бұрын
I do have a depth gauge and I used to use it but after sharpening thousands of times I know when my rakers are to high when I cut and I can feel the if the chain needs work. Like when the chain starts to get dull and needs a touch up, I can feel it.
@donskelly658611 ай бұрын
Slick!!
@InTheWoodyard11 ай бұрын
thanks!
@The_Blessed_Cowboy11 ай бұрын
It usually takes me 1 beer to sharpen a 28" full house. Dremel looks quick...would have to shoot whiskey instead maybe?
@InTheWoodyard11 ай бұрын
Less than 2 minutes. I like whiskey but never when cutting!!! Only after!
@iamthatguy1169 Жыл бұрын
Good luck on this smart tool! I love the "Made in America" build quality! I'm sure you will sell them. I also appreciate the Dremel sharpening advice as I've been considering switching to a rotary tool over the files. I'm tired of my files dulling after only a few uses and constantly ordering new ones.. also the Dremel seems easier and faster and with a sharpening stone more effective, but wasn't sure if I was just going to waste more time and money switching it up. Your testimony tells me my assumptions are correct. Oh,... and it was painful watching you run that chain on the cement, but I think it it might have been a good way to take down your rakers anyway... Haha
@InTheWoodyard11 ай бұрын
Try a rotary tool sometime, they work great!
@kylehazachode Жыл бұрын
Ryobi finally released a compact dremel recently in their new USB-C battery line of tools. That'll be my black friday gift to myself. I have a soft carry case for my chainsaw with a bunch of pockets (too many pockets). That new dremel will fit perfectly in that case.
@InTheWoodyard11 ай бұрын
That is awesome, you will like it!
@SevenOaksOutdoors Жыл бұрын
I need one of those!
@InTheWoodyard Жыл бұрын
email me at chrisinthewoodyard@gmail.com
@danshouseofsmokeandoutdoor7119 Жыл бұрын
I would like one but I can’t make it to the show. Let me know if want sell ship one. Looks like a great tool.
@InTheWoodyard11 ай бұрын
We are going to make another batch with pre-ordered sales...send me an email and you can be on the list. maryinthewoodyard@gmail.com
@toddpacheco4748 Жыл бұрын
Chris you better save one for Tony ❤😊😮
@InTheWoodyard11 ай бұрын
Yup!
@Lens-KeepingBusy11 ай бұрын
Cris when you use the Dremel are you worried about the teeth not being the same size, some may be smaller or bigger than others, does it then affect the cutting
@InTheWoodyard11 ай бұрын
No not at all. Sharp and good raker depth is all that matters EXCEPT when the teeth get TOO short then they cut slower. When only 1/3 of the tooth is left I think it is time for a new one.
@Lens-KeepingBusy11 ай бұрын
@@InTheWoodyard thanks Cris👍, I ordered some on Amazon should get today ❤️
@barrywiggins4380 Жыл бұрын
Chris. Any chance you may ship one to Tasmania cheers Baz from Tasmania
@InTheWoodyard11 ай бұрын
I do not know but I am sure it will cost, send me your address in an email and I will find out! chrisinthewoodyard@gmail.com
@Vincesquadsquad11 ай бұрын
Hey Chris, Love the video. I’m interested in your vise but I live in Canada. Is that an issue?
@InTheWoodyard11 ай бұрын
Not that I know of, Canadians are like good cousins to us here! Haaa! Just email us at maryinthewoodyard@gmail.com and we can get you on the list!
@joepatterson19562 ай бұрын
so now instead of carrying a stump vice (1 lb), yoy carry a vice mounted on a3 ft board which weighs ?????, i go with the stump and a file that lowers the drags as it files the teeth. try it which takes the most space?
@InTheWoodyard2 ай бұрын
Yup, I mostly cut in my wood yard and I sharpen 3-5 saws at a time in 15-20 minutes on the tail gate, nice height and no looking for a stump so..... it works for me.
@joepatterson19562 ай бұрын
@@InTheWoodyard thanks for the reply
@JoeRainis15611 ай бұрын
Chris I’ll be at Bunyan and would like one. Do you have a booth or will you be traveling around. I should be at Buckin/ripsaw booth most of the weekend. I arrive Thursday morning for set up.
@BertsCustomCuts11 ай бұрын
Find any of us we will all be there. Ill be there Thursday too.
@InTheWoodyard11 ай бұрын
Yup, we will be there!
@outdoorsinthe608 Жыл бұрын
If you have some left after the show I’m interested! 👍👍
@InTheWoodyard Жыл бұрын
We will make more....probably.
@johnolson9614 Жыл бұрын
I want one
@InTheWoodyard11 ай бұрын
Then you NEED to email us at maryinthewoodyard@gmail.com Thanks!
@garylavoy21508 ай бұрын
If you order in bulk cost usually goes down not up.
@InTheWoodyard8 ай бұрын
Yes IF the bulk meets the size needed for discounts.
@rickthelian2215 Жыл бұрын
You should stamp your In The Woodyard logo into them Chris 😀
@BertsCustomCuts Жыл бұрын
His logo is engraved into it. I put up a video on my channel machining them.
@rickthelian2215 Жыл бұрын
@@BertsCustomCuts thanks Bert, as asked by another member can you put a link in to your channel. BTW how are you going in the kitten reduction program, snip snip or reforming those cuties...?❤️
@jolkraeremeark6949 Жыл бұрын
Just click on his little picture icon next to his name in this or any post.
@InTheWoodyard Жыл бұрын
I clearly showed that it is engraved on it in the video, you might want to watch the video again.
@InTheWoodyard Жыл бұрын
KZbin does not want people putting links to other thinks on videos and people can get banned for doing it, it is stated in the community guide lines.
@jeffpeters1014 Жыл бұрын
Mention that the file for the rakers doesn’t have teeth on the sides, some people won’t know that.
@BertsCustomCuts Жыл бұрын
You can use a file with teeth on side you just need to be careful not to hit the tooth. Mine that I use has teeth on side and havent had any issues.
@InTheWoodyard Жыл бұрын
You are correct!
@Sethhaun7811 ай бұрын
Cool
@InTheWoodyard11 ай бұрын
I do not know I do not track the hours on every saw but it is the original bar so not a ton.
@NathanBlair-mm4xl5 ай бұрын
Do you still have any of these available for purchase?
@InTheWoodyard5 ай бұрын
Yes, e-mail us at maryinthewoodyard@gmail.com
@pekerja2711 ай бұрын
Mantap setelan oil nya pas banget , jadi bar mesin gak terlalu panas
@InTheWoodyard11 ай бұрын
Thanks for watching!
@bernardlegallic8449 Жыл бұрын
Nice tool
@InTheWoodyard Жыл бұрын
Glad you like it!
@mikehughes2026 Жыл бұрын
Top Quality piece🇺🇸Looks like your ex-best friend had a part in this, sure he will one day review in his TQT series
@InTheWoodyard Жыл бұрын
Possibly!
@BertsCustomCuts Жыл бұрын
Thanks
@jamessummers300911 ай бұрын
Hi chris! Would you ship one to the UK???? And how much would shipping cost? cheers!
@InTheWoodyard11 ай бұрын
Yes, I sure would but you would have to pay for the shipping. Just email us at maryinthewoodyard@gmail.com
@dcorey361110 ай бұрын
How much for the tool and who is available through?
@InTheWoodyard10 ай бұрын
It can be ordered from me at chrisinthewoodyard@gmail.com $80
@matthewnasci2646 Жыл бұрын
6061 aluminum machined from billet and polished? Two piece assembly? Nice collaboration gentlemen. And what better way to use the channel for more than views?
@BertsCustomCuts Жыл бұрын
6061 completely machined no polishing and 2 piece construction. There is a video of the machining on my channel.
@InTheWoodyard11 ай бұрын
Thanks Matthew!
@travisrist3218 Жыл бұрын
A couple in a line a foot apart would hold nicely.
@InTheWoodyard Жыл бұрын
Yup, you can get two if you want! But one works fine.
@Sethhaun7811 ай бұрын
How many hours ish on thecsaw?
@InTheWoodyard11 ай бұрын
I do not know, I do not track the hours on my saws, but it is the original bar so not a ton.
@Chris-oe4gq5 ай бұрын
Chris can I get one of your tools?
@InTheWoodyard5 ай бұрын
Yup, email us at maryinthewoodyard@gmail.com thanks!
@Sethhaun7811 ай бұрын
Husky c83 has good chains I've run them there just high.i have all atihl saws so kinda have to run there's..but I get 40 percent off all chain discount so it works dealership is 5 minutes away
@InTheWoodyard11 ай бұрын
ok
@iffykidmn8170 Жыл бұрын
Started out with a 4inch bench vise bolted to the tailgate of the woods truck,Tried a stump vice for a bit but it continually pulled out of the stump so eventually modded it by cutting the spikes off and welded a piece of flat metal and bolted it to a piece of wood serviceable but not nearly as nice looking as Berts design.
@BertsCustomCuts Жыл бұрын
Thanks
@InTheWoodyard11 ай бұрын
Yup, it looks great!
@savagefirewood11 ай бұрын
Good day Chris ! I definitely want one of Those chainsaw holders put my name down please . As always it’s pleasure to watch your videos and communicate. Hope to to be able to meet in person one day. A trip will happen sometime soon . Cheers # 1 fan 👌🏻🔥🇨🇦
@InTheWoodyard11 ай бұрын
Thanks but to get on the list you have to email us at maryinthewoodyard@gmail.com thanks!
@Mainelywork11 ай бұрын
🤘
@InTheWoodyard11 ай бұрын
Thanks!
@cs21cs296 ай бұрын
Still looking to buy a chainsaw vise if you have any left
@InTheWoodyard6 ай бұрын
Thanks...email me at chrisinthewoodyard@gmail.com and my wife will get in touch with you!
@cs21cs296 ай бұрын
@@InTheWoodyard will do thanks again
@lonniechartrand Жыл бұрын
So, if you ALREADY own a "stump vise", why not just cut you a round, or slab, off of a log and drive the stump vise into it? Same thing right?
@InTheWoodyard Жыл бұрын
Because they do not work well and you have to then carry an axe also to pound it in with and you need a really big stump at waist level or higher to work off the ground so.... The tailgate is WAY better to work off and then it can also be used on a work bench too, so better.
@lonniechartrand11 ай бұрын
@@InTheWoodyard I guess I did not make myself very clear. Why not just take the stump vise you already own, and cut a round off of a log, OR, get a 2 X 10 board cut to the length you need, and pound the vise into the wood. This can be used the same way. Carried to your truck bed, bench, whatever. Since you already have the stump vise why not make use of it? I like your "bolt on" model, but I already own a stump vise and hate to waste it.
@Sethhaun7811 ай бұрын
Monkey beaver has one like that I need one I have the old stump vise you gotta pound in logg.but I'm in woods mountain s so it's nice .
@InTheWoodyard11 ай бұрын
OK.
@brucearney9536 Жыл бұрын
Awsome !
@InTheWoodyard Жыл бұрын
Thanks ✌️
@brianprange8049 Жыл бұрын
Would love to get one of those. What other tools are you and Burt going to come up with?
@BertsCustomCuts Жыл бұрын
Guess you'll have to wait and see.
@InTheWoodyard Жыл бұрын
We will see you there!
@zeromark20211 ай бұрын
Emailed you about the saw, thanks
@InTheWoodyard11 ай бұрын
Got it!
@jimmieburleigh9549 Жыл бұрын
You need an adjustable bracket to mount a loose chain on to sharpen when you have a back pocket full of chains to sharpen
@InTheWoodyard Жыл бұрын
Maybe if I had a pocket full of chains, but that has never happened to me, I just sharpen on my saws. I have 7 saws so when one is dull or needs a rest I grab the next one and after 3-4 are dull I sharpen all of them up.
@jimmieburleigh954911 ай бұрын
@@InTheWoodyard 👍
@billobermeyer66011 ай бұрын
This is what I've been looking for. I will have $70 at the show. Do I still need to email you? GNI
@BertsCustomCuts11 ай бұрын
Just find one of us at the show. They might go fast.
@billobermeyer66011 ай бұрын
@@BertsCustomCuts Okay, will do
@InTheWoodyard11 ай бұрын
We will have one for you there Mr. Bill! See ya soon!
@davesauerzopf6980 Жыл бұрын
So you use Oregon chains instead of the name brand chains? I bought a new Stihl Chain and it was 38 bucks! Hard to believe their chain is that much better then the Oregon Chain.
@InTheWoodyard Жыл бұрын
I use Oregon and Husqvarna chains.
@chrisdaly3485 Жыл бұрын
Can’t are it to the show, but I would like the vice. Let me know when available.
@InTheWoodyard Жыл бұрын
email me at chrisinthewoodyard@gmail.com so we can be sure to put you on the list! THANKS!!