Axial Capra UTB18 Upgrades, Can It Keep Up with 1/10th?

[@Scoobienorth]

My daughter and I are loving the baby Capra. It’s a fun trail rig. I’ve got brass portals coming for the front and I think I’m going to stretch the wheelbase next up on it. I’m trying really hard to keep it on the cheap. If I’m going to spend a bunch of money on it, I’d rather just buy the big Capra instead.

[@nickimperatrice350]

I’m all for more Utb18 videos. I always have mine in a backpack. I run the Utb18 after on the same lines to see if it’ll make it. Awesome video

[@DesertRockCrawler]

Thanks you. It's a fun rig

[@chuckclayton3862]

Definitely want more, just got one and am interested in all types of upgrades.

[@barceloni1984]

Fantastic crawl spot. And the rig climbs very well, a lot better than my utb18. I havent done much to mine. Brass hexes, wheels and class 0 krawlers. I couldn't stand the whine from the motor, and had a spare reedy sc480x esc. Took care of that. Great video 👍🤘

[@706Rocks]

UTB18 is one of my favorite rigs. Mines 4WS, brushless, overdrive, brass. I’m in the process of building a second one for my channel. Awesome video, subscribed.

[@xploring2083]

Great video. Make sure you bring your Mini to the end of season camp & crawl. If your going to make it.

[@joepiper6064]

Nice Rig ! I got 4WS with the 400 lp. servos very capable!

[@ndspecial]

Loving my utb18 largest rc I have now. Treal brass front. 20% ud rear 17% od front. Tusk on treal wheel. Dlux cvd. Treal steering links. Treal rasier. 1080hw. Need more time out lol

[@chuckclayton3862]

Enjoyed watching your video, you're one damn good driver, learned a couple things to try the next time out.

[@DurpVonFronz]

Yo man, RC TNT from Australia just made a free downloadable file to print a new chassis for these lil rigs. Looks like it made it better :) Anyways, very kewl crawl man, that place looks like some deadly fun! Its so unlike the terrain around here.

[@bradgenet1541]

Yes, I enjoy the UTB 18 videos. My UTB is similarly equipped. I haven't stretched the wheelbase. I switched to Proline shocks with original springs and cups. I added BEC. I also added Club 5 racing tail lights and dual exhaust. Other upgrades are comprable.

[@johnhix9871]

The UTB18 got the click. More please

[@bikeracr]

I am doing a major upgraded on one of my UBT18's and am wondering where you bought the c/v axle shaft's? and thanks to this vidio found the underdrive gears for the rear portals and ordered them. I also sub'ed to your channel

[@DesertRockCrawler]

Dlux rc has all the cv axles and multiple utb18 goodies

[@bikeracr]

@@DesertRockCrawler Thank you Sir

[@Casitascrawlers]

I’m putting in a Protek servo in so I had heard that there is some cut out with especially the high voltage servos so I’ve seen them on Amazon for cheap so I’m going to pick one up I just installed the Furitek Stinger system & bound it to a Flysky 5 I’m just waiting on the servo. I was at Proline by the Fire & the stock servo decided to go out. What battery do you use? The Stinger set up has the same connector as the original & I have a 900 mh battery & the one it came with.

[@DesertRockCrawler]

Tatuu 850mh 3s battery, 3d printed lcg battery tray from thingiverse, converted to xt60 plug.

[@postalacidity]

I'm looking at doing +10mm links in the rear on my sons. How much difference do you think it made?

[@DesertRockCrawler]

I went 10mm and think it could use some more. I'd go 10mm and add another 4mm or see if there's a company that offers 14-15mm rear links

[@Toodles77]

I’ve been considering one of these for awhile now to go with my 1/10, you may have just made up my mind

[@Toodles77]

What’s the link riser improve?

[@DesertRockCrawler]

Antisquat

[@mattabe86]

More UTB videos please

[@giopirmisashvili5514]

❤😊