बाइक के इंजन में ओवरहीटिंग क्यों होता हैं? | Engine Overheating - Causes and Ways to Prevent it

  Рет қаралды 986,680

MECHANICAL TECH HINDI

MECHANICAL TECH HINDI

3 жыл бұрын

To prevent a motorcycle engine from overheating, you will need to keep up with basic maintenance of the motorcycle such as regular oil changes and having proper coolant levels (for water cooled motorcycles). Make sure the idle screw on the carburetor is at a decent spot so the motorcycle does not maintain a high idle.
Air cooled vs Oil cooled vs Liquid cooled - Which engine is the best? : • Air cooled vs Oil cool...
How many km should a motorcycle run continuously? : • मोटरसाइकिल को लगातार क...
What are Engine Oil Grades : • What are Engine Oil Gr...
How often to change Engine Oil in Motorcycle? : • How often to change En...
CAUSES AND WAYS TO PREVENT IT
Initial start: When you crank up your motorcycle to leave for work everyday, please do not over rev the motorcycle as soon as you start it. Keep the engine at idle for a few minutes and let the engine oil do its job. This process is called engine warm up and doing this will keep your motorcycle’s engine healthy.
Carburetor setting: The mixture of air and fuel entering the engine cylinder must be correct in order to overcome overheating of the motorcycle. If air/fuel mixture entering the engine is lean then there are chances of your engine overheating. So setting the carb to give a perfect mixture is really important.
Engine oil check: Always keep your engine oil at check to overcome engine overheating. Low engine oil will lead to inadequate cooling of the engine. Engine oil must be changed at correct intervals for a healthy engine life.
Coolant check: Liquid cooled motorcycles come with a radiator setup which circulates the coolant inside the engine to cool the engine effectively. Proper coolant capacity and a perfect mix of the coolant with distilled water makes way for efficient cooling.
Faulty radiators and radiator fan: Radiator is a part which circulates coolant into the engine. The coolant when circulated, carries all the heat. If the radiator is covered with dust and waste particles, the heat dissipation will not be complete and the coolant will not cool enough to enter the engine again. Keeping the fins of the radiator clean is a very important part to aid for better cooling.
Radiator fans are used to cool down the coolant in the radiator when the motorcycle is stand still and the coolant temperature exceeds. Improper functioning of the fan leads to consequences.
Coolant leak: Make sure the coolant level is correct at all times. If the level of coolant is below the recommended level, immediately top it up by adding distilled water to avoid heating problems. Fix the leak, if any and continue riding.
Riding at high speeds for a long time: Riding at high speeds for a long time means keeping the engine revving high. Revving the engine high for a long time will keep the pistons moving and the combustion of fuel takes place without a break. Its best to stop the engine and let it cool for about 10-15 minutes and carry on while taking break intervals thereafter.
#EngineOverheating #Motorcycle #Safety
Join my channel and become a member : / @mechanicaltechhindi
The wait is finally over. I am here with KZbin's very first Automobile & Mechanical Engineering Channel in HINDI.
In this channel i will upload videos related to automobile and mechanical engineering topics such as engine, I C engine, Cars, Motorcycles, Production, HMT, Thermodynamics, FM, CAD/CAM etc.
So subscribe my channel and learn everyday
Follow me on twitter: ⤵
/ dashingdanish11
Add me on Facebook: ⤵
/ danish.ali.754
Follow channel on Instagram: ⤵ / mechanicaltechhindi
Contact me: ⤵
mechanicaltechhindi@gmail.com

Пікірлер: 823
@akhilesh.ad1399
@akhilesh.ad1399 3 жыл бұрын
10000%%%% CORRECT V YSEFULL POINTS YOU COVERD
@sharma_80766
@sharma_80766 3 жыл бұрын
I have a splendor+ bike , which has covered nearly 87000 KM and have show room look , I follow all those rules which u discuss , thanks for giving these tips .
@shameemfathima6735
@shameemfathima6735 3 жыл бұрын
Very useful information Thank you Sir
@tkpcreation1318
@tkpcreation1318 3 жыл бұрын
Maine jaisa socha tha jesa apply bhi karta hu bilkul sahi bataya appne Tysm
@vijaybhatt9638
@vijaybhatt9638 3 жыл бұрын
Jabardast information about engine heating 👌👌👌
@secure1237
@secure1237 3 жыл бұрын
You're a gift to everyone you meet. Motivated and hardworking.
@MECHANICALTECHHINDI
@MECHANICALTECHHINDI 3 жыл бұрын
😊👍
@vinodbhatt5572
@vinodbhatt5572 3 жыл бұрын
Sir you are right, but as per my knowledge oil need to be completely changed, after some km riding of the byke, oil looses its ability to absorb heat from the engine and reject to the atmosphere so oil needs to be completely changed.
@raazivkr3086
@raazivkr3086 22 күн бұрын
First time I searched.. I m facing nd finally I got right answer by A Right PersoN 🙏Thank you Sr..😊
@ayushkumarsingh6213
@ayushkumarsingh6213 3 жыл бұрын
Your videos are very helpful for mechanical students.I have learnt a lot from you which I have not learn from my college also. you are doing a tremendous job for us who belong to a very poor class family. Thanks a lot Sir . god bless you always🙏🙏🙏
@rajeshvispute1884
@rajeshvispute1884 2 жыл бұрын
Great information sir, thanks 🙏🙏
@KiranPatel-ef3gh
@KiranPatel-ef3gh 2 жыл бұрын
Wow superb information thank you Sir...
@dayanandprabhu7153
@dayanandprabhu7153 3 жыл бұрын
बहुत ही बडीया इन्फॉर्मेशन दि धन्यवाद मेरे दोस्त
@MECHANICALTECHHINDI
@MECHANICALTECHHINDI 3 жыл бұрын
😊👍👍👍
@amitaman108
@amitaman108 3 жыл бұрын
Your video and it's content is far better than thumbnail
@satishvasane6812
@satishvasane6812 3 жыл бұрын
बहुत अच्छा भाईसाहब धन्यवाद
@MECHANICALTECHHINDI
@MECHANICALTECHHINDI 3 жыл бұрын
👍👍👍
@engineerirfan
@engineerirfan 2 жыл бұрын
AWESOME VIDEO SIR 💜
@biswajeetchoudhury191
@biswajeetchoudhury191 10 ай бұрын
Bahut shandaar tarike se aap humko samjhadiye Thank you Sir
@NareshPatnaik369
@NareshPatnaik369 3 жыл бұрын
Omg sir very nice knowlage thanks very helpful ❤️💕❤️💓💕
@niteshkumar2116
@niteshkumar2116 Жыл бұрын
Thanku sir for your information 🙂👍
@PawanKumar-im1ru
@PawanKumar-im1ru 3 жыл бұрын
Thank you sir... it's very helpful information.. it's because of your guidance and instructions I have driven my Activa 5g from Delhi to GORAKHPUR...approx 953km and my scooty is in good condition.. again.. Thank you so much :)
@MECHANICALTECHHINDI
@MECHANICALTECHHINDI 3 жыл бұрын
U r most welcome 😊👍
@ganeshbharadwajshooter1913
@ganeshbharadwajshooter1913 3 жыл бұрын
How many days u took? Fantastic job
@PawanKumar-im1ru
@PawanKumar-im1ru 3 жыл бұрын
@@ganeshbharadwajshooter1913 bro..it took 28hrs... since it was new scooty..so I have to take breaks after 70-80km and the long halt was at Lucknow for 4hrs
@vishalmanohare6966
@vishalmanohare6966 3 жыл бұрын
Bahut achi jaankari
@mhatretech3536
@mhatretech3536 2 жыл бұрын
Another reason for the engine to overheat is that if you set the taapet clearance setting properly, the engine will run very smoothly.
@munawarhusainmulla5219
@munawarhusainmulla5219 3 жыл бұрын
Very informative video 👍
@arizakram6517
@arizakram6517 Жыл бұрын
i feel another possible reason behind engine being over-heated is riding your bike roughly in a careless manner with the frequent variation in speed and acceleration.
@zuber_rao
@zuber_rao Жыл бұрын
100%agree😅😅
@gyanprakashgoutamknowladeg5831
@gyanprakashgoutamknowladeg5831 2 ай бұрын
😊
@sushamamadavi5395
@sushamamadavi5395 3 жыл бұрын
Thanks 4 good knowledge
@bijendaryadavmp9739
@bijendaryadavmp9739 3 жыл бұрын
You are right... Awesome ji
@MECHANICALTECHHINDI
@MECHANICALTECHHINDI 3 жыл бұрын
😊👍👍
@middyaentertainment5766
@middyaentertainment5766 3 жыл бұрын
Thanks DaDa Very Useful Video
@MECHANICALTECHHINDI
@MECHANICALTECHHINDI 3 жыл бұрын
👍👍👍
@balsonnaoshekpam6240
@balsonnaoshekpam6240 2 жыл бұрын
Thanks for the Video
@dukdahal
@dukdahal 2 жыл бұрын
thanks a lot for information
@surajfreedish9777
@surajfreedish9777 3 жыл бұрын
Nice information सर thanks
@eunlawon5290
@eunlawon5290 3 жыл бұрын
Ek no. Information diya , bhai Saab. Bhot bhot dhanyawaad🙏 thank you very much. Aise hi Vidya badatein chale. 1 million subscribers aapke channel Ko.
@MECHANICALTECHHINDI
@MECHANICALTECHHINDI 3 жыл бұрын
😊👍👍👍
@sureshsuresha6387
@sureshsuresha6387 3 жыл бұрын
Thank you sir god bless you
@MECHANICALTECHHINDI
@MECHANICALTECHHINDI 3 жыл бұрын
👍👍👍
@anaystudies2408
@anaystudies2408 2 жыл бұрын
Thanx a lot sir Good information provided by you
@anilkumar.r.toravi7830
@anilkumar.r.toravi7830 3 жыл бұрын
Whether engine overheatng could be caused by thinning of oil density also?
@ZakirHussain-tk8jy
@ZakirHussain-tk8jy 2 жыл бұрын
Sir bahut achi jankari hai apki
@suneelmaurya3119
@suneelmaurya3119 2 жыл бұрын
Most important your information I like it
@jagdishgohel6115
@jagdishgohel6115 Жыл бұрын
Thank you 🙏
@uvkvk
@uvkvk 3 жыл бұрын
Hi Very good and genuine knowledge shared by you. I recommend your channel . Can you please tell me At what RPM, gears should be changed during up shifting and down shifting..? And does RPM increases with increase in speed? I have Yamaha MT15 bike.
@IAm-xp2kj
@IAm-xp2kj 3 жыл бұрын
Thank you sir
@skscorporation9534
@skscorporation9534 3 жыл бұрын
Very informative
@dayalankp9442
@dayalankp9442 3 жыл бұрын
sr very useful vedio thanks
@krishankant7556
@krishankant7556 3 жыл бұрын
Good information
@PatraPrahllada
@PatraPrahllada 3 жыл бұрын
Tysm good informative sir
@indranilsarkar6834
@indranilsarkar6834 3 жыл бұрын
Sir your manner and technique of explanation shows your love for the subject and in depth knowledge. If I had got a teacher like you who calmly and patiently explained everything in a very simple manner I would have been a different person altogether and would have achieved great success in my life. Anyways lots of love to you 💖🙏🙏
@MECHANICALTECHHINDI
@MECHANICALTECHHINDI 3 жыл бұрын
Thanks 😊👍
@shakiransarishakiransari3263
@shakiransarishakiransari3263 2 жыл бұрын
बाइक के रेगुलर कितने किलोमीटर
@Rajatkumar-tp3rg
@Rajatkumar-tp3rg 3 жыл бұрын
Is tarah ka video plz banate rahe sir... vehicle problems and their solutions...plz sir...isse naye students ko bohot help milegi
@MECHANICALTECHHINDI
@MECHANICALTECHHINDI 3 жыл бұрын
😊👍👍
@babybarman9951
@babybarman9951 Жыл бұрын
Thank you sir.
@madhusudansharma7368
@madhusudansharma7368 3 жыл бұрын
Jabardast vedio suggest best engine oil for Passion pro
@jamesdebbarma3036
@jamesdebbarma3036 3 жыл бұрын
thankou for information sir
@MECHANICALTECHHINDI
@MECHANICALTECHHINDI 3 жыл бұрын
Welcome
@sourabhjangam4970
@sourabhjangam4970 3 жыл бұрын
Useful info thank u sir
@jyotiprakashsingh9222
@jyotiprakashsingh9222 3 жыл бұрын
Very nice knowledge
@MECHANICALTECHHINDI
@MECHANICALTECHHINDI 3 жыл бұрын
👍👍👍
@mdsaidurrahmankhan6312
@mdsaidurrahmankhan6312 3 жыл бұрын
Good explain
@gsriderktdbullet2630
@gsriderktdbullet2630 3 жыл бұрын
Very helpful 👍 sir
@amartayade2525
@amartayade2525 3 жыл бұрын
Very good & useful information.
@MECHANICALTECHHINDI
@MECHANICALTECHHINDI 3 жыл бұрын
👍👍👍
@balabhadrasing9976
@balabhadrasing9976 2 жыл бұрын
Bahar achha sir. Thank 🙏you
@s.p.general.knowledge
@s.p.general.knowledge 3 жыл бұрын
Good information sir 👍🏻
@MECHANICALTECHHINDI
@MECHANICALTECHHINDI 3 жыл бұрын
👍👍
@sandeeppatwardhan1212
@sandeeppatwardhan1212 3 жыл бұрын
Very Nice Explained 👍
@MECHANICALTECHHINDI
@MECHANICALTECHHINDI 3 жыл бұрын
👍👍👍
@balsonnaoshekpam5680
@balsonnaoshekpam5680 2 жыл бұрын
Nice explanation Sir 👍 Plz tell us for car also
@kuntiladiestailor
@kuntiladiestailor 3 жыл бұрын
Very informative video bro
@SahilKumar-kk8gt
@SahilKumar-kk8gt 3 жыл бұрын
Nyc knowledge bro
@pravinrasamwar6008
@pravinrasamwar6008 3 жыл бұрын
My bike recommendation 10w30, but itll cause many problems. So i top up 20w40. Then getting smooth riding. Will it ok?
@kk4603
@kk4603 2 жыл бұрын
Good information.
@amitkumar-ue4bl
@amitkumar-ue4bl 3 жыл бұрын
Plz share CC wise riding schedule
@onlinehelpwithindra1913
@onlinehelpwithindra1913 3 жыл бұрын
Thank usable video
@MECHANICALTECHHINDI
@MECHANICALTECHHINDI 3 жыл бұрын
👍👍👍
@ashutiwari940
@ashutiwari940 3 жыл бұрын
Nice knowledge diliverd by u danish Bhai😊😊😊🙃🙃🙃🙃
@MECHANICALTECHHINDI
@MECHANICALTECHHINDI 3 жыл бұрын
😊👍👍
@thememes8223
@thememes8223 3 жыл бұрын
Very good information bro 👍🏽🤟
@MECHANICALTECHHINDI
@MECHANICALTECHHINDI 3 жыл бұрын
👍👍👍
@manpreetkumar1135
@manpreetkumar1135 2 жыл бұрын
thank you sir ji.
@tmgodzilla1
@tmgodzilla1 3 жыл бұрын
Nice job sir ji 👍👍👍
@Jitendrajksaini8190
@Jitendrajksaini8190 3 жыл бұрын
Awesome 👍 sandaar 👌
@nirajraj2273
@nirajraj2273 3 жыл бұрын
Bahut hi achchha laga video sir ji bus aesa hi video banate rhe
@MECHANICALTECHHINDI
@MECHANICALTECHHINDI 3 жыл бұрын
👍👍👍
@hasmukhbutani1131
@hasmukhbutani1131 2 жыл бұрын
Bahot badhiya bhaiji
@learningpointwithdk7446
@learningpointwithdk7446 Жыл бұрын
Well explained
@Graymondkharmawphlang1122
@Graymondkharmawphlang1122 2 жыл бұрын
sir with respect I would to ask you one question, does changing ordinary engine oil to fully synthetic oil helps in heating issues?
@meditationmusic3164
@meditationmusic3164 9 ай бұрын
Nice information sir
@anjanisharma3964
@anjanisharma3964 3 жыл бұрын
Nice explation ❤️❤️❤️❤️❤️❤️
@MECHANICALTECHHINDI
@MECHANICALTECHHINDI 3 жыл бұрын
👍
@ShubhamSharma-cn6db
@ShubhamSharma-cn6db 3 жыл бұрын
Thank you sir very informative video Kya aapki bhi workshop h
@nadimsindhi997
@nadimsindhi997 3 жыл бұрын
Best information
@MECHANICALTECHHINDI
@MECHANICALTECHHINDI 3 жыл бұрын
👍👍👍
@nirabhmani9523
@nirabhmani9523 Жыл бұрын
Can you please suggest possible reasons?
@sanjeevsingour8944
@sanjeevsingour8944 2 жыл бұрын
Very good sir
@jayprakashsharma2044
@jayprakashsharma2044 3 жыл бұрын
Thanks sir 🙏
@kamleshjaiswar7897
@kamleshjaiswar7897 3 жыл бұрын
Good knowledge
@manojchoudhary8849
@manojchoudhary8849 3 жыл бұрын
Nice information bro thanks
@MECHANICALTECHHINDI
@MECHANICALTECHHINDI 3 жыл бұрын
Welcome
@radhaballabhsaha3391
@radhaballabhsaha3391 3 жыл бұрын
BOHUT HI boriya tips Diya hai AAP. Special Thanks AAP ko.
@MECHANICALTECHHINDI
@MECHANICALTECHHINDI 3 жыл бұрын
👍👍
@ja4756
@ja4756 11 ай бұрын
Good thanks
@randomeditz2484
@randomeditz2484 3 жыл бұрын
So much knowledge butt still people think mechanical engineering is not good
@saritaDevi-pp2bu
@saritaDevi-pp2bu 3 жыл бұрын
Thanks sir ji
@VarunKumar-on3vg
@VarunKumar-on3vg 3 жыл бұрын
Bilkul sahi .. msat h bhai
@laxmanpatil3860
@laxmanpatil3860 2 жыл бұрын
Nice information
@madking8349
@madking8349 3 жыл бұрын
Use full ❣️
@ajayuadhyay2595
@ajayuadhyay2595 3 жыл бұрын
Very nice sir
@MECHANICALTECHHINDI
@MECHANICALTECHHINDI 3 жыл бұрын
👍👍
@junaksutradhar5531
@junaksutradhar5531 3 жыл бұрын
Respected Sir, why the CDI coil is getting extra hot
@zalavirendra7683
@zalavirendra7683 3 жыл бұрын
thanks sire
@durgeshthakre7993
@durgeshthakre7993 3 жыл бұрын
Very nice video sir
@MECHANICALTECHHINDI
@MECHANICALTECHHINDI 3 жыл бұрын
👍👍👍
@bhargavbhat9380
@bhargavbhat9380 3 жыл бұрын
sir kya car ka coolnet per also distilled water use karna chahiye?
@RaviRavi-gm7mi
@RaviRavi-gm7mi 3 жыл бұрын
Give tips for change Tyre. how many km Tyre change?
@JitenderKumar-em6wk
@JitenderKumar-em6wk 3 жыл бұрын
Best Chanel
@thegame3265
@thegame3265 3 жыл бұрын
Nice information..., dear have u any Yamaha rx 100...old one..
@mayanksingh-zt6fx
@mayanksingh-zt6fx 3 жыл бұрын
Sir plz make a video on how to set mileage in Apache RTR 160 2V
@techajeetofficial
@techajeetofficial 3 жыл бұрын
Really apki video kafi useful hoti h
@MECHANICALTECHHINDI
@MECHANICALTECHHINDI 3 жыл бұрын
👍👍👍
@techajeetofficial
@techajeetofficial 3 жыл бұрын
Half engine bana ho agar wo overheating ho rha h to kya problem ho skti h bro
@RizwanKhan-wf5oy
@RizwanKhan-wf5oy 3 жыл бұрын
Thanks ❤❤❤
@romeolaltu3418
@romeolaltu3418 2 жыл бұрын
Tq so much sir
@sunildon6981
@sunildon6981 3 жыл бұрын
You are bike guru keep it up
@MECHANICALTECHHINDI
@MECHANICALTECHHINDI 3 жыл бұрын
👍👍
DO YOU HAVE FRIENDS LIKE THIS?
00:17
dednahype
Рет қаралды 80 МЛН
路飞被小孩吓到了#海贼王#路飞
00:41
路飞与唐舞桐
Рет қаралды 29 МЛН
Bike Engine Overheat🔥 Problem & Solution - Must Try
9:04
Bullet Guru
Рет қаралды 14 М.