Baby Turtle By Sub250GFPV // 1s 2incher // Maybe Buy Soon?

  Рет қаралды 8,917

Nick Burns

Nick Burns

Күн бұрын

Пікірлер: 106
@Sub250gFPV
@Sub250gFPV 2 жыл бұрын
Thank you 🙏so much Nick for this video of my little 2” frame 😉, I’ve just finished designing the V3 version with extra motor protection and it can now also take a 16x16 stack along with a new camera mount that can take a 14mm Caddx Ant 😁👍
@Therberg2500
@Therberg2500 2 жыл бұрын
Hi Phil, awesome little frame! Where and when will I be able to buy the V3 version?
@Sub250gFPV
@Sub250gFPV 2 жыл бұрын
@@Therberg2500 I’m just placing an order for the V4 Version so as soon as they arrive I’ll let you guys know 😁👍
@mrityunjay1234
@mrityunjay1234 2 жыл бұрын
@@Sub250gFPV I am interested as well
@abertheham
@abertheham 2 жыл бұрын
Been a lurker on your Insta for a couple years now - cool to see you finally get some “mainstream” recognition. You’ve been grinding away (pun intended) for a long time and have some really unique designs. Definitely deserve to have your product line succeed to whatever extent you desire. Thanks for your contributions and keep it up!
@FineVisionz
@FineVisionz 2 жыл бұрын
Such a cool frame. A mini 5" almost. I agree with you though Nick, a 2s version of this would be amazing!
@MrDeathFPV
@MrDeathFPV 2 жыл бұрын
I love seeing the Notification for a new Nick Burns video yo
@Latchfpv
@Latchfpv 2 жыл бұрын
What a fun little number. Very nicely done Phil @Sub 250g FPV.
@NickBurnsFPV
@NickBurnsFPV 2 жыл бұрын
Hit Phil up below if you want to pursue getting a Baby Turtle frame. Sub250gFPV on KZbin - kzbin.info Sub250gFPV on Instagram - instagram.com/sub250gfpv/ Phil on FaceBook - facebook.com/phil.hunter.... The designs currently available - bit.ly/3rC5vZA
@trajanfpv
@trajanfpv 2 жыл бұрын
This looks like a very cool design. I have the 40mm prop version coming as well. Thinking about a lightweight 2s 40mm build. Sub250gFPV has got some really cool ideas and listens to feedback.
@FpvBudgetBuilds
@FpvBudgetBuilds 2 жыл бұрын
Great looking little frame. Looks fun and fast the way its built up..👍
@CrawlersCampRc
@CrawlersCampRc 2 жыл бұрын
Like how your clear it's not available at time! You know this little guy don't look to bad to start with. He brings it in like Darwin prices could see it being a hot seller as is💯
@DonJohnsonFPV
@DonJohnsonFPV 2 жыл бұрын
Phil is the man !!! But that a runcam atom not nano 4... Now you need to try a 40mm props 1002 motor build 😉
@Sub250gFPV
@Sub250gFPV 2 жыл бұрын
Thanks Don the 1002 motors you helped to develop are fantastic 🤩🤩
@valden
@valden 2 жыл бұрын
I got mine and am hoping to throw it together tonight or tomorrow with rcinpower 1002 19000kv and happymodel elrs 5amp aio and a nano 3. Should be around 28 grams without battery. A very cool setup.
@willpowerfpv3246
@willpowerfpv3246 2 жыл бұрын
That's wild Nick, I'm using that board in three different builds, and I've had excellent video reception. In fact, it's one of the reasons I like the board so much. I've flown my 1s 65 mm whoop nearly a kilometre away with a true RC Singularity antenna and the flywoo nano-camera, and the video was rock solid. Maybe you received a bad one? 🤔 My video looks WAAAY better than this. Very cool little quad! Hope all is well with you and the fam. ✌️
@NickBurnsFPV
@NickBurnsFPV 2 жыл бұрын
I only have the one. Some strong flashing going on in my flights
@SilverbackSasquatch19xx
@SilverbackSasquatch19xx 2 жыл бұрын
I think I found the next frame I want to cut!! Thanks for this video!!
@yohfpv
@yohfpv 2 жыл бұрын
I've been following his designs on instagram. Quite impressive.
@chrisbee5481
@chrisbee5481 2 жыл бұрын
Did you build up the the electronics? Phil usually uses the Happymodel diamond FC for this Kind of build. My favourite 1S 2 inch build are with the Happymodel 1102 13500kv motors and gemfan 2036 props.
@NickBurnsFPV
@NickBurnsFPV 2 жыл бұрын
I did build this. I used what I had on hand and bought an atom camera to fit the mount
@wingsounds13
@wingsounds13 2 жыл бұрын
This little quad looks really nice. Alas... My favorite quad class is 3" ultralight. Better flight characteristics (in my book) and more flight time on the same size battery. At this time, I am not a fan of any of the Runcam nano cameras, though I have not tried the all. Nano 2 was okay, Nano 3 was different but not really any better. Nano 4 looks like a pass for me even though I do like the slightly narrower field of view.
@megahertz6787
@megahertz6787 2 жыл бұрын
I’m a big fan of 3” ultralight long range builds . On 4s LIHV & 1407 3,300kv motors I can get 15min flights but I can go 85mph if I want lol
@fpvMazerolle2607
@fpvMazerolle2607 2 жыл бұрын
I really Like this the fact that its top mounted 1s Lol cool...... damn thing rips like my 3inch 4s
@MCsCreations
@MCsCreations 2 жыл бұрын
Fantastic flying, Nick! Thanks for the review! 😃 Pretty impressive little quad! I loved the frame! Stay safe there with your family! 🖖😊
@dronereviewman9580
@dronereviewman9580 2 жыл бұрын
something about you makes me feel at home. Love your channel!
@NickBurnsFPV
@NickBurnsFPV 2 жыл бұрын
Great! I guess it’s at least in part my less than professional videos 😂
@dronereviewman9580
@dronereviewman9580 2 жыл бұрын
@@NickBurnsFPV always makes My day watching you rip around your back yard! I hope I can fly like that one day. thinking about trying the "Drone Mask" because i could never fly good with my fat sharks. Anyways stay safe and keep flying
@sixtofive
@sixtofive 2 жыл бұрын
2s & about 8500 - 10k kv motors would be great! I was glad you suggested that thicker frame option at the end.
@NickBurnsFPV
@NickBurnsFPV 2 жыл бұрын
Lol yes but I said inch rather than mm, left the goof in 😁😁
@sixtofive
@sixtofive 2 жыл бұрын
That's a fun and good looking setup!
@mad_caterpillar7725
@mad_caterpillar7725 2 жыл бұрын
I'm phils sponsored pilot ive been exclusively messing with the 1.6" variation of the baby turtle the latest is 2-3s!!!
@NickBurnsFPV
@NickBurnsFPV 2 жыл бұрын
3s? Whoa going to the moon? 😁
@mad_caterpillar7725
@mad_caterpillar7725 2 жыл бұрын
@@NickBurnsFPV yes mate I'm tagged on phils instagram bio, its crazy 😜
@drunkskunk00
@drunkskunk00 2 жыл бұрын
Cool. the Frame looks great, I want one. the electronics, not so much. 18,000 kv is better for a 31mm prop on 1s. I'm going to keep this in mind once HDzero releases the 1s board and camera
@NickBurnsFPV
@NickBurnsFPV 2 жыл бұрын
I tend to run 10000kv on 2s with 2inch triblades. Maybe 15000kv would have longer flight but less top end
@Monkey_D_Cluffy
@Monkey_D_Cluffy Жыл бұрын
I fell in love with the frame and i ordered a 1.6 and 2 inch frame for 2 different setups. So are you saying you HAVE to absolutely use a caddx ant camera?
@NickBurnsFPV
@NickBurnsFPV Жыл бұрын
No, but we need a camera with 14mm mounting.
@pathrusimkeaffaber967
@pathrusimkeaffaber967 2 жыл бұрын
That is a neat design. I would definitely would be interested in one for 1 s and 2 s as well
@timrodriguez1
@timrodriguez1 2 жыл бұрын
You’re such a tease….j/k….lol. Hooray for top-mounted micros…🤘🤠
@kevinsmith9420
@kevinsmith9420 2 жыл бұрын
Not sure, but I don't think your requested 2.5 inch bottom plate will fly very well!
@NickBurnsFPV
@NickBurnsFPV 2 жыл бұрын
Lol yes another goof I left for a laugh…2.5mm
@UnravelledMoney
@UnravelledMoney 2 жыл бұрын
I tried looking for this exact frame after seeing it on Instagram also!!!
@NickBurnsFPV
@NickBurnsFPV 2 жыл бұрын
Now maybe you can get in contact for o get one 😁
@Crusader4633
@Crusader4633 2 жыл бұрын
I've been following Phil for quite some time, and definitely want one of these frames. I could probably transplant my Meteor 65 Pro into it... :) O_O
@NickBurnsFPV
@NickBurnsFPV 2 жыл бұрын
My only conversion concern is 1mm motor shafts without protection will likely bend 🥲
@propsoff
@propsoff 2 жыл бұрын
I think that's a cool looking miniripper.. I'm not s fan of Flywoo. Would a pinch fit? Also, I SMASHED THE LIKE BUTTON...👍🏻🍻👊🏻
@NickBurnsFPV
@NickBurnsFPV 2 жыл бұрын
I think the pinch would need a mount modification for the lens but otherwise probably
@american7169
@american7169 2 жыл бұрын
Pool cover might be a good idea...
@NickBurnsFPV
@NickBurnsFPV 2 жыл бұрын
Yep it is being installed
@rawpicsfpv3516
@rawpicsfpv3516 2 жыл бұрын
So, which nano 14x14 cam with screws is your fav? Especially in the very light weight category:)
@NickBurnsFPV
@NickBurnsFPV 2 жыл бұрын
It’s hard to beat the runcam nano 3, it has a mount for screw mounting. Then it would be the caddx ant and if the weight penalty is okay the caddx baby ratel 2
@jhughes2286
@jhughes2286 2 жыл бұрын
Can you raise the brightness in the camera settings? Runcam nano 4 right?, I wanted to like this camera.
@NickBurnsFPV
@NickBurnsFPV 2 жыл бұрын
Actually its the runcam atom. Another goof in the video. No adjustments to my knowledge
@billdor121
@billdor121 2 жыл бұрын
I have problems with the Goku board as well, I got the version without the rx so I could use elrs. For some reason when I first plug in it will be fine, but if I disarm or unplug then plug back in it will have terrible range and the osd gets all jumpy. I thought maybe it was just dropping power level on disarm to save the vtx but that feature wasn't activated and the osd bouncing around is a new one to me. I'm assuming it's not a widespread problem cause I haven't heard anyone else complaining about it but I thought it was interesting that you also had video issues with yours
@NickBurnsFPV
@NickBurnsFPV 2 жыл бұрын
If the video issue is osd specific it can sometimes be traced back to a grounding issue. With an AIO there isn’t much for us to check other than our battery led soldering
@billdor121
@billdor121 2 жыл бұрын
@@NickBurnsFPV I'll give it a look-see, maybe there's a broken ground there, I just think it's weird that it does it after it's been disarmed. Its still flyable as long as I don't wanna watch my voltage too much lol
@NickBurnsFPV
@NickBurnsFPV 2 жыл бұрын
@@billdor121 electrical issues can we weird. We could solve or troubleshoot further if we swap out the AIO but that isn't always practical.
@pirateradioFPV
@pirateradioFPV 2 жыл бұрын
Going down FOV is a lot more difficult than going up, I've been trying to do that for months now 😁
@NickBurnsFPV
@NickBurnsFPV 2 жыл бұрын
Lol I especially noticed inside. I felt like I had to slow down inside
@pirateradioFPV
@pirateradioFPV 2 жыл бұрын
@@NickBurnsFPV Walls sure do come fast at us 😁
@gvs3259
@gvs3259 2 жыл бұрын
His Carnage 3.5 is amazing! really hard to beat.
@Dangeresque14
@Dangeresque14 2 жыл бұрын
I also have a carnage 3.5 and it flies so well!
@Dillyart
@Dillyart 2 жыл бұрын
@@Dangeresque14 I’ll third that too!👍🏻👍🏻🤗🤗
@etxfpv598
@etxfpv598 2 жыл бұрын
I agree on the 2s 2" builds :D
@JAYFPV24
@JAYFPV24 2 жыл бұрын
Am coming over for the pool and dive it after it has water in it lol mandalooooo to the mooonnnn lol yea seems like a great lil bugger just that camera really dark but still a a little ripper
@NickBurnsFPV
@NickBurnsFPV 2 жыл бұрын
It’s getting closer the last few days. The liner is in and it’s being filled
@JAYFPV24
@JAYFPV24 2 жыл бұрын
@@NickBurnsFPV ooo yea let’s gooo am coming over woohooo lol we gonna mandalooooo into the pool
@EdturdEnfart
@EdturdEnfart 2 жыл бұрын
Wonder how those gf2015 would be on rocket race 2s?? Have you tried ?
@NickBurnsFPV
@NickBurnsFPV 2 жыл бұрын
I haven’t tried them yet. I would likely need to retune. Maybe this weekend
@chrisbee5481
@chrisbee5481 2 жыл бұрын
They dont perform well. Tried them on the rocket race build. You would need higher KV motors for those low pitch 2015 props. My favourite prop on the rocket race are the GF 2036
@EdturdEnfart
@EdturdEnfart 2 жыл бұрын
@@chrisbee5481 the hulkies?
@chrisbee5481
@chrisbee5481 2 жыл бұрын
@@EdturdEnfart yes
@EdturdEnfart
@EdturdEnfart 2 жыл бұрын
@@chrisbee5481 imma have to try those out
@sburnham3
@sburnham3 2 жыл бұрын
Do the gnb27 connectors come apart easier than the betaflight ones that i can't get separated?
@NickBurnsFPV
@NickBurnsFPV 2 жыл бұрын
Hmm well I would say that, I haven’t had much trouble with bt20
@sburnham3
@sburnham3 2 жыл бұрын
@@NickBurnsFPV I ordered a set of five m/f connectors and they are impossibly tight and so small and no edge on each side to get a grip on. Might have to switch to xt30
@gmivisualsjason3729
@gmivisualsjason3729 2 жыл бұрын
Excellent video as always
@NickBurnsFPV
@NickBurnsFPV 2 жыл бұрын
Thank you
@gmivisualsjason3729
@gmivisualsjason3729 2 жыл бұрын
@@NickBurnsFPV I purchased a darwin baby ape yesterday. Thinking of converting it immediately to hdzero. Would be great for the master to do the same for a bit of your tuning expertise.. 😀 However I think I'd be wise to wait for the new feather light board and camera first
@NickBurnsFPV
@NickBurnsFPV 2 жыл бұрын
@@gmivisualsjason3729 I think the new hdzero micro camera might require some specialized camera mounting.
@gmivisualsjason3729
@gmivisualsjason3729 2 жыл бұрын
@@NickBurnsFPV agreed.... wonder if its 14x16 ??
@NickBurnsFPV
@NickBurnsFPV 2 жыл бұрын
@@gmivisualsjason3729 It is 14x16. :)
@Bisdak.3475
@Bisdak.3475 Жыл бұрын
Hi I Nick, is this frame still available and if so where can I buy one?
@NickBurnsFPV
@NickBurnsFPV Жыл бұрын
Not to my knowledge. Check sub250 fpv on instagram. He is the designer. I thought it was on cncmadness but I don't see it.
@Bisdak.3475
@Bisdak.3475 Жыл бұрын
@@NickBurnsFPV too bad I don't do any social media other than subscribing YT
@NickBurnsFPV
@NickBurnsFPV Жыл бұрын
@@Bisdak.3475 This is where the the frames are posted, but I don't see this one www.cncdrones.com/philip-hunter-.html?fbclid=IwAR1HYLu7GFKdDznBg3OkU9C7KNluVxINm8saJVbqhMK08XJHEBHQ5ARZ5Qc
@ShinyVideoStuff
@ShinyVideoStuff 2 жыл бұрын
Ask him on Instagram, he sells the frame there. I have one.
@chrisbee5481
@chrisbee5481 2 жыл бұрын
You from the UK? He didnt sell me one 😆
@MrDeathFPV
@MrDeathFPV 2 жыл бұрын
I didnt realise how much the nano 4 sucks. I wish it could be a nano 2 with the same form factor
@NickBurnsFPV
@NickBurnsFPV 2 жыл бұрын
Yea I was thinking back it I had reviewed the camera prior to this. Nope didn’t, I can’t say why
@preclubek8251
@preclubek8251 Жыл бұрын
do they still make this frame? i really want to get this ..
@NickBurnsFPV
@NickBurnsFPV Жыл бұрын
I think so. I have links in the video description to contact the frame creator.
@preclubek8251
@preclubek8251 Жыл бұрын
@@NickBurnsFPV thank you nick you are the best.
@makaveligreen5458
@makaveligreen5458 2 жыл бұрын
It is dark They should’ve use the nano three
@makaveligreen5458
@makaveligreen5458 2 жыл бұрын
I want it!!!😩😂😂🤟🏾
@NickBurnsFPV
@NickBurnsFPV 2 жыл бұрын
Touch base with him. He might be selling privately
@complicatedbreakfast7645
@complicatedbreakfast7645 2 жыл бұрын
This thing is tiny!
@NickBurnsFPV
@NickBurnsFPV 2 жыл бұрын
Yes sir! Tiny freestyle
@memed_sipalingfpv
@memed_sipalingfpv 2 жыл бұрын
First like first coment from Indonesian
@RCRitterFPV
@RCRitterFPV 2 жыл бұрын
2s I want Hd... :)
@juneloko
@juneloko 2 жыл бұрын
First
TKS75 3D Print Version \\ Ultra Micro \\ 1S Ripper
19:09
Nick Burns
Рет қаралды 18 М.
When mom gets home, but you're in rollerblades.
00:40
Daniel LaBelle
Рет қаралды 98 МЛН
CAN YOU DO THIS ?
00:23
STORROR
Рет қаралды 43 МЛН
小丑揭穿坏人的阴谋 #小丑 #天使 #shorts
00:35
好人小丑
Рет қаралды 25 МЛН
MY HEIGHT vs MrBEAST CREW 🙈📏
00:22
Celine Dept
Рет қаралды 92 МЛН
My New Favorite 1s Tinywhoops - Flywoo Firefly Nano V2
11:04
TRONCAT FPV
Рет қаралды 11 М.
TKS StarLord - Great Basher // Kevin Langlois // 1s Cheap
13:37
Nick Burns
Рет қаралды 10 М.
Not for Wussies! - New HGLRC Draknight RTF Beginner Fpv Drone Kit
17:03
Best PC FPV Simulator // WE TRIED THEM ALL
22:28
Joshua Bardwell
Рет қаралды 357 М.
Why I switched from DJI to Walksnail: Caddx Gofilm 20 + Goggles L
29:17
When mom gets home, but you're in rollerblades.
00:40
Daniel LaBelle
Рет қаралды 98 МЛН