Back at The Yard Scrapping Many Things

[@andygardiner68]

Another great scrapping video Cheers Phil 👍😁

[@CanadianTreasureHunter]

Thanks 👍

[@terridionne7729]

There will always be people criticizing just do what you do and don't worry about other people thanks for all your videos

[@robertbedard-h9t]

love watching things get scrapped out,almost as good as alley/street hawking.great video

[@michaelschuenemann3505]

Brilliant LONG Stripping Session of various Items - very Interesting indeed - always a Pleasure ! Many Cheers from Australia !!!!

[@josephcormier5974]

Little red will be right as rain soon anuff she's a fighter after all then she will be back in the thick of it thank you for sharing this wonderful video with us seven stars brother

[@johncooper9980]

Both vehicles need repairs now! I know how you feel. 👍😎👍

[@CanadianTreasureHunter]

I will be looking for new van in a few months

[@maxcloutier5285]

I remember that two years ago, Stainless Steel went to 90 cents a pound. I hope for us that it will return there eventually. You have a serious pile of it !

[@CanadianTreasureHunter]

It went up to $1.10 per pound

[@maxcloutier5285]

@@CanadianTreasureHunter I just found a video that gives for explanation that Indonesia is actually supplying nickel at a low price. They might be able to do this until the end of the decade. The price of nickel went from 48 324 USD per tonne in March 2022 to around 16 000 USD actually. Although nickel is only one of the possible component of SS, it surely help to keep the price down. kzbin.info/www/bejne/q4LTmmeOqsuab9U

[@terridionne7729]

It would be interesting to find out if your yard would give you more for stainless steel if you brought in a hole yellow been full is it possible to ask them

[@robertlivingstone3947]

Good video good job phil

[@drfhgfgdthrt1715]

Now that you've done the experiment with the bigger motor, it may also be worth it to do a scan through your motor collection and sell off any that also wouldn't be worth stripping. I think you have a number of big motors in the shed from several years back that would make a good payday.

[@altafrahman2254]

Exactly my thought.

[@jamesross382]

Hi Phil. Very interesting processing vid.Enjoyed it very much.Keep up the good work. Thx

[@CanadianTreasureHunter]

Thanks 👍

[@deejaysavoie7158]

Dam poor lil red had enough of starting that’s gonna cost a few bucks but what can ya do it’s a work horse

[@CanadianTreasureHunter]

The last starter cost 600 that was about 2 years ago, Cheap crap

[@noneyabeeswax3200]

@@CanadianTreasureHunteryou might look at rebuilding it may just be a little chip goes bad happens a lot with alternators too

[@deejaysavoie7158]

Lil red is a pure work horse with that I put in to her lol

[@briantreacy4209]

Absolutely Fantastic video Again well Done man 👏👏👏

[@CanadianTreasureHunter]

Thanks again!

[@jerrysadventures8952]

good and long context thanks

[@Deescrapsescraps]

Keep that plastic out of the landfill- great job w those milk jugs

[@bigcountryscrapper6885]

Great video my friend

[@CanadianTreasureHunter]

Thank you 👍

[@Nas_Atlas]

It's the same schrader valve in the propane tank as in a tire valve. The problem is the valve is a little deeper so I cut a slit into a thin screwdriver and I use that to strip the valves out of the little green tanks. Works pretty good. Sometimes I get a lot on certain jobs. The central valve also has a rubber and plastic ring on top that you have to pop out with a hook tool. I made a video on it a few years ago.

[@rixismetals]

Great video mate 👍

[@CanadianTreasureHunter]

Thanks 👍

[@ابراهيمابراهيم-ض1ث7ق]

جميل انا من متابعيك

[@ioncoroama9783]

SUPER

[@patrothwell9138]

Another great tear down video Phil. Nice to see your tearing stuff down in the yard that had been there a while before spring clean up👍. When do you think you're going to tear apart That central air unit good copper and Brass there plus a Nice ACR?Have a great Sunday.Crazy they wamt 600 for you're a starter what a rip off

[@MsMaxno]

👍👍👍

[@vinnienowhere1015]

You’ve been stacking your stainless steel for a while. Are you waiting for the prices to rise? Will you fill one of your bins when you cash it in or is that something you would have to take with little red?

[@CanadianTreasureHunter]

Waiting for prices to get better

[@ВячеславНаумов-ъ5х]

👍👍👍👍👍

[@lawrencelipon8673]

👍👍👍👍👍👌

[@alialsubaie6155]

👍🌹💪

[@y.lelivelt2619]

Are you gonna spend some dollars to little Red Phil?

[@deejaysavoie7158]

The way prices are now may cost 800 now 🤬 only 2 years ya that tells u the junk they make now a days that should have lasted wayyyy longer

[@CanadianTreasureHunter]

$500 at one shop but too busy & $600 at another shop

[@IgorVangelov]

😞📞📞📞🎂🎂🎂

[@CasutaCuRetete]

I don't understand, why do you cut two wires and throw them into the container and again cut two other wires and throw them into the container, why don't you cut them all and throw them away, out of 6minutes of cutting threads 3 minutes were just to throw the wires into the container, work smart, not just for video content, you lose subscribers and views,

[@CanadianTreasureHunter]

If you think you know it all make your own videos

[@deejaysavoie7158]

Phil has a system he uses it’s not for u to criticize him be kind

[@deejaysavoie7158]

I agree phil u do what ever is best u been doing this a very very long time don’t be upset to people that don’t understand buddy

[@CasutaCuRetete]

@@CanadianTreasureHunter I'm not criticizing, I'm telling you that you waste a lot of time cutting one thread at a time and you throw it into the container and you cut another thread and throw it away, it fills up video with cutting thread by wire and throwing thread by thread... I noticed in other videos, you took 4-5 times the same key for the drill, you need a larger container for drill utensils, And when you clean a piece, you rush to throw a small piece in the bin, and then you come back to the work table to continue cleaning what's left of the piece, you waste a lot of time doing this, out of 60 minutes at least 25 are wasted throwing wire by wire and small pieces into the container Watch the video to see what I'm trying to explain I don't create videos because I have another job

[@CasutaCuRetete]

@@CanadianTreasureHunter When you cut all the threads and throw them all at once in the container, you don't waste time throwing wire by wire and getting scissors to cut again. Work smart and get rid of downtime For small parts of what you undress you can put small containers on the table and when they are filled you throw them into the big container, so when you throw away each piece of aluminum, you lose time when you go to the container, when you come back, until you get another piece.

[@brendamiller8140]

Great video Phil you accomplice so much and then things will get stubborn but you beat the clock.⭐️⭐️⭐️⭐️⭐️⭐️⭐️🧡💖💚🩵💛💜🥰🤗