BACK To Basik's, Project MODE! - Onboard Lifestyle ep.277

Рет қаралды 27,434

Күн бұрын

On this week's episode of Onboard Lifestyle, we get back to our basiks and lean hard into project mode. It feels good to make improvements that will make life a bit smoother onboard. Come back next week to see what we're up too...see you then!
JOIN OUR CREW!
If you are interested in helping us produce these videos then please feel free to check out our Patreon page. / onboardlifestyle
TIP JAR:
Enjoy our videos? Want to give us a virtual high-five? Treat us to glass of rosé or whiskey on the rocks or another book for Emma? Or pitch in on a tank of fuel? Click over to see how you can support our productions (most of the ways won’t cost you a dime):
www.paypal.com...
SHIP'S STORE:
Want to purchase our sv basik gear? Check our our Merch Store and show us some love by grabbing a shirt or two! Designed by our Swabby Emma:
theletteringma...
PRODUCTS & CAMERA GEAR:
www.amazon.com...
We have collected some of the products we use during our refit and to make videos in our Amazon shop. If you buy any of the items from our shop or anything else on Amazon (using the link), we get a few pennies added to our cruising kitty. Thank you so much and thank you to Amazon Influencer program.
Don't forget to like us on Facebook!
/ onboardlifestyle-sv-ba...
Check out our website! Still updating. 😜
www.onboardlif...

Пікірлер: 93

@robertjeter5984 8 ай бұрын

Teal is a master at boat building I’ve missed the projects

@BellsRidesAboardSeaBoss 10 ай бұрын

12:14 That’s my kind of luck, lol Hope you Didnt get into too much trouble. Nicely done Teal

@jpchevalier5038 10 ай бұрын

I came to see you up there in Astoria. I am still following you and enjoy watching your journey. Keep it up.

@OnboardLifestyle 10 ай бұрын

Awesome! Thank you!

@rgronback 10 ай бұрын

Nice work, as always. I guess the Linh holding the bucket approach beats the taped plastic bag approach. 😂

@jamesbillington5058 10 ай бұрын

I like Teal's motto of measuring 23 times and drilling only once. 😁

@curacao11 10 ай бұрын

😎

@sailingstpommedeterre4905 10 ай бұрын

YES !! Butyl Tape is KING. I use it everywhere...most recently on my own winches and hatch bolts. Good video! Thank you for keeping it real...showing mistakes and all.

@glencrandall7051 10 ай бұрын

Another project complete. It look good too. Even though you missed the position of your trash bag. Those are really good looking winches. Thank you for sharing. Have a great day and stay safe.🙂🙂

@XavierPil 10 ай бұрын

You were off by 4”?!?!?! You, Master of Precision?!😮 It makes me feel better because you are always so perfect and precise. Now I don’t feel too bad about my work. Even tough I would been off by…. 8”!😂 Love your channel

@jonathansimonbarr 10 ай бұрын

Nice work Teal

@bradcable 9 ай бұрын

Nicely done.

@jpmontaperto5304 8 ай бұрын

You all are so awesome the way you work together. I’m really happy to see you out exploring some too. Somehow you have get Teal healthy and stay that way. You are a great team together. Love your videos.

@paulwackerla6330 10 ай бұрын

Those barrel nuts work great and give it a nice finished look. Great job!

@tomriley5790 10 ай бұрын

Great work Teal! I'm always impressed with the quality of your work and workmanship! Basik is lucky to have you looking after her!

@bobuncle8704 10 ай бұрын

Love the thumbnail. Either Tiel has shrunk a lot, or that’s one massive winch. I know everything doesn’t always go perfectly, but your planning and attention to detail is outstanding.

@bishopkinlyside8477 10 ай бұрын

Hi guys, wow looks fantastic even like the idea of having those fender washes on there. I think it’ll be much stronger. Keep up the good work love and appreciate you all Cliff from Logan City Queensland Australia

@CaptainShack 10 ай бұрын

I'd love to know how you made these perfectly circular backer plates.

@karlfair 10 ай бұрын

Measure with a micrometer. Mark with chalk. Cut with an ax. The new winches are a nice addition.

@geoffreyparkinson3495 10 ай бұрын

Emma is such a lovely young lady - she is such a credit to your loving upbringing - please may all of you stay safe and well and continue your glorious adventure

@JibeTalking 10 ай бұрын

Teal your work is so clean and precise.I really enjoy seeing you work and hope I can do the same quality of work...

@jimanderson2518 10 ай бұрын

Great work as usual Teal ....as a Butyl expert myself ....as I mentioned before always always clean your surface with Isopropyl Alcohol before applying the butyl tape..including bolts..... I was also wonder why you did not seal the inner core with a coat of epoxy... just asking ... Fairwinds from the @captains.chair

@jpmontaperto5304 8 ай бұрын

Wow, incredible job Teal.

@tomscott3939 10 ай бұрын

nice work great jobTeal!!

@kenvangoe9358 10 ай бұрын

Those really make things look finished Teal and we all know how you are about things being just right. Glad to see your wing is feeling better now as i know how that can be bothersome. Hope we get to see that addition at work.be careful and stay safe my friends God love ya all ❤

@stevehammond7485 10 ай бұрын

Measure twice, bag once~ :( But honestly, I am the same way when I have a project. Fit and re-fit until I finally commit to drilling holes etc. Love your channel.

@genewaddlerandomstuff2122 10 ай бұрын

I will watch this now and enjoy it. Yes, I will. 🙃

@mikesawyer9209 10 ай бұрын

Great episode! Coincides with our next project! AND Compass made an early appearance!

@robinhoward9113 10 ай бұрын

safe travels

@SailingSisu 10 ай бұрын

Hey there! So glad to see you're excited about watching this new episode of Onboard Lifestyle! It's always great to dive back into the basics and see a project mode in action. Enjoy the journey, my friend! 🌊⛵️

@mathewdavis-adventuresandd6643 10 ай бұрын

As always, a great job. I think the washers just make the job look correct also.

@rboston33 10 ай бұрын

This epi gave me a few chuckled. Good job

@BJ-xs7np 10 ай бұрын

Neal, it amazes me how you can see how the project has to go from start to finish, you have the whole thing planned out with every minute detail before you even begin, what a great talent to have that oversight to see the whole project before you even pick up the drill. Congrats on the installation of the winches, they are beautiful. Hope that makes putting up that sail so much easier!

@HopeOfJoe 10 ай бұрын

Niiiiiiiiiiiiiiiiiiiiiice work m Trail..............of course!! These winches should really help you guys out tremendously. See you next time.✨ 🌊 💨 ⛵️ 🏝️ 👙 🌞 ✨

@pattieh5118 10 ай бұрын

Great new beginning

@paolodallafavera1430 10 ай бұрын

Congratulations Teal for another work well done! Could you please let us know which material the backplates are made of! Thank you!

@chrisr819 10 ай бұрын

Great work guys. Well the new Harken you are choosing are suboptimal. These chrome plated rope guides are cheapest thin metal stuff and frequently bend and destroy the plastic underneath it, every time 90Euro for the metal and 50 for the plastic underneath...2 of my buddy boats had them and after spending each >500Euro on these rope guides they replaced them with good old used model which have casted brass rope guides that are bassically indistructable.

@gflores7018 10 ай бұрын

Looking good Great job Thank you for your videos

@Bill23799 10 ай бұрын

Oh wow......new Wenches for the boat. Arghhhhh!

@robertlemoine3500 10 ай бұрын

Thankyou

@rayallen1479 10 ай бұрын

Awesome, meticulous work as usual. Is there anything the crew of Basik can’t do? Greetings once again from Anacortes!

@OnboardLifestyle 10 ай бұрын

Lol, there are many things we can't do, but we'll definitely give it a shot!

@bryanheairet2925 10 ай бұрын

Us builders call engineers twisted.

@kimblemooney2757 10 ай бұрын

Sweet

@DYoung-vt8pq 10 ай бұрын

That mess could have been worse, Teal. You tried! Be well ❤

@ryanh4889 10 ай бұрын

Great job. I would have put some anti seize on those barrell nut threads.

@donj2744 9 ай бұрын

👍👍

@brianlowe753 10 ай бұрын

Sail on sail on sailor. Barrel nut or acorn nut ?😂

@justsomeguy6474 10 ай бұрын

For the future, you can just grind a 1/8 inch off those bolts for the barrel nuts to fit so you don't need the washers.

@genewaddlerandomstuff2122 10 ай бұрын

As he said in the video though, he actually likes having the washer on there because it helps spread the load of the nut over a wider area on the backing plate.

@lowellmccormick6991 10 ай бұрын

You call them barrel nuts. In the Ornamental Architectural fabrication industry, we call the barrel nut & bolt set, sex bolts. If you type that into the McMaster-Carr search box, barrel nuts will come up. I think it must be a widely used slang term.

@jorgemonserrate7070 10 ай бұрын

I guess your next big purchase will be a new dingy?

@jeffreylord8172 10 ай бұрын

Teal, I hope your arm injury is improving. Your videos are excellent, does Emma do the editing.

@roycepruett5862 10 ай бұрын

I was hoping to see the new winches in use.

@sheliaspencer7902 10 ай бұрын

Emma has a future in broadcasting ,i

@jimlofts5433 10 ай бұрын

do you need to oversize the holes and fill with epoxy and then redrill to prevent water ingress or does the core not get waterlogged ??

@genewaddlerandomstuff2122 10 ай бұрын

This is how he answered that same question earlier. "That's the beauty of NidaCore. Even if water did get in, it wouldn't do much. The core is polypropylene honeycomb that is impervious to moisture."

@jimlofts5433 10 ай бұрын

@@genewaddlerandomstuff2122 thanks

@tracynichols7206 10 ай бұрын

Didn't counter sink washer and barrow nut so it's not a head knocker? Thought you would use cickaflex to seal

@robertrantane6867 10 ай бұрын

Can you see when you get a thumbs up? 12:23, way to go! :-)

@2011mendo 10 ай бұрын

I'm guessing, because you never mentioned, that the curvature of you boat kept the backer-plates 100% flush.. otherwise would it have not been better to place that butyl tape to the complete top plate. Or does that tape not work on flat surfaces like that! I understand the squish/seal, at the bolts, but curious if it works on 2 flat surfaces too. Or do you caulk around the top plate? Oh, and personally, I'd have drilled maybe 2 or 3 pilot holes using that top plate (small bore) then put that bag up inside using those small holes as guides.. very little clean up, spot on bag placement!

@SADIK19631963 10 ай бұрын

👍🧿

@franbaas3403 10 ай бұрын

Should you have enlarged the holes and filled them with epoxy before drilling bolt holes to stop water damage to core?

@genewaddlerandomstuff2122 10 ай бұрын

This is how he answered that same question earlier. "That's the beauty of NidaCore. Even if water did get in, it wouldn't do much. The core is polypropylene honeycomb that is impervious to moisture."

@philscott7949 10 ай бұрын

I'm surprised Teal didn't make some calipers to measure the thickness.

@Footballislife1900 10 ай бұрын

Could you have put the fender washer on the bolt end to hide it or would that create a gap on top?

@tracyraley4003 10 ай бұрын

That’s all good but what did Lynn make for dinner?

@The_Riddler21 10 ай бұрын

👍✌️

@donj2744 9 ай бұрын

👍

@catlanticsail 10 ай бұрын

I was a little concerned about the placement, I’m hoping that the winches are far enough aft that you can comfortably grind them. It can be awkward if they’re set too far from the edge of the deck. Oh, and it’s “backing plate”.

@bkfitz 10 ай бұрын

I'm curious why you decided not to over drill those holes and then fill with epoxy before re-drilling so that any water penetration doesn't get into the core.

@genewaddlerandomstuff2122 10 ай бұрын

That's why he sealed around the holes with butyl sealing tape. I'm guessing that above the water line, what you're suggesting just wouldn't be necessary.

@OnboardLifestyle 10 ай бұрын

That's the beauty of NidaCore. Even if water did get in, it wouldn't do much. The core is polypropylene honeycomb that is impervious to moisture.

@tywhittaker3513 10 ай бұрын

is his injury healing nice?

@OnboardLifestyle 10 ай бұрын

Slowly but surely getting better. Thanks for asking!

@mlordson9843 10 ай бұрын

Would you ever use lock tight on any of the nuts and bolts. (FYI not a sailor)

@OnboardLifestyle 10 ай бұрын

No need, the barrel nuts are in such a visible location that it's easy to inspect daily.

@EdwardBlack 5 ай бұрын

But what's about 'Drill, fill, drill?'

@OnboardLifestyle 5 ай бұрын

DFD is for cored material that is susceptible to decay. Basik has a polypropylene core and is not necessary. With the exception of holes below the waterline were it doesn't hurt to go that extra mile.