Backlighting Differences Between Diode Dynamics Product Lines

[@andrewvillavicencio8496]

Thanks, I was wondering if I should get the back lighting with the SS3's I was pondering on getting. Thanks!

[@DanhNguyen-xq5tk]

Nice setup you got there sir, may I ask where do you get the splitter wire harness for s3 and ssc1 from? I try to use same setup like your but I can’t find any splitter wire harness for it, thanks 🙏

[@LightwerkzGlobal]

You can find the DT 4pin splitter here: lightwerkz.net/products/deutsch-dt-4-pin-splitter-wire-one

[@DanhNguyen-xq5tk]

@@LightwerkzGlobal thanks alot

[@66skate]

@@LightwerkzGlobal That was the one thing I needed. Just ordered a pair.

[@myrtlemcnappy1641]

That dual a pillar is bad ass !!!! Do you have a video of what it looks like on ? Worthy of doin ?

[@Ggg-l6r8e]

Sorry no videos to share of them in use. Ditch lights definitely come in handy. The smaller add-on pod is nice to get actual ditch coverage if you have forward facing pods.

[@myrtlemcnappy1641]

What are you referring to when you say demon eyes ?

[@mrbruns2619]

I notice that your connections on the ss3 and ss1 have a black sleeve over the 4 pin connector. Mine did not come with those sleeves. Did that come with the pods, or did you do some custom work on them?

[@LightwerkzGlobal]

Those are the 4pin splitters.

[@jimmieg6218]

The lenses make a big difference for backlight. Thanks for sharing

[@philliptran1125]

Was wondering for your amber backlight for the fog lights where did you end up tapping into for the 12v? I'm pretty new to the whole wiring scene. If not could always give a call.

[@LightwerkzGlobal]

If you want the back lighting to turn on any time the car is running you will want to use a " add-a-circuit" fuse tap and tap into the fuse panel. I believe I have mine tapped into the Ignition fuse but there is usually a few options to tap into. A lot of 4runner owners already have this fuse tapped due to adding additional accessory lighting such as the front raptor led lights or aftermarket headlights. So basically you tap into the same line using a wire tap if there is already a line being ran to this fuse slot.

[@philliptran1125]

@@LightwerkzGlobal that makes sense! I really appreciate the guidance!

[@aaronqueen55]

Hi, I have a question. I am putting a pair of backlit ss3 on my 4Runner. I’m also putting an extension so I can put another pair of ss3 that are not backlit so a total of 4 ditch lights. I also have a trigger 6 shooter. How do you recommend I wire this up and what harness(es) do I need to get?

[@LightwerkzGlobal]

Really just comes down to custom wiring it up. I would use 4 pin DT and 2 pin DT pigtails. If you purchase the universal pods they come with these. So then you would just extend the wiring and run it to the 6 shooter. The 6 shooter comes with some wiring that you can use. Its all 9006 style connections on that unit that go in/out of each of the 6 power leads. Both of the ditch lights can be on a single line, and the back light feature can be on the next line or it can be connected to any line thats already feeing switched-power accessories such as raptor lights.

[@GhettoFabulous670]

Does the ssc3 ditch lights have the same connectors as the ssc2? I currently have the ssc2 for my ditch lights and I want to move up to the ss3 in hopes of Moy splicing wiring just plug and play

[@LightwerkzGlobal]

Yes, all the connections are the same. You either have 2 pin DT or 4 pin DT (for back Lit pods)

[@bk33n3]

I haven’t hooked my backlights up yet because I’m hesitant to tap into factory wiring. Someone suggested I should just tap into my raptor lights (which were done with add a fuse connected to headlights) will this work or set my truck on fire?

[@LightwerkzGlobal]

Yes thats the perfect wiring to tap into.

[@ourlifereviews]

Do you know if the ss3 backlight is brighter on the max than the sport? I don’t need a super bright fog but I am interested in the backlight for DRL.

[@LightwerkzGlobal]

backlight intensity does not change between the pods.

[@carlovillanueva9713]

Even with the Amber fogs?​@@LightwerkzGlobal

[@American_Muscle_Truck]

Badass man! Great idea with the extra light by the pillar light... Did you have to get a special mount for the smaller light next to the pillar light?

[@LightwerkzGlobal]

The SSC1 (small pod) conveniently mounts to the larger SS3 pod. Just happens to work out!

[@American_Muscle_Truck]

@@LightwerkzGlobal unfortunately I have already installed Baja design racing pillar lights with sdhq mounts.. sounds like I have some fabricating to do.

[@unremind]

Does the back lighting turn off when you turn the lights on?

[@LightwerkzGlobal]

Correct the main light takes priority and turns off the back light.

[@OddaKatsu]

Are these the white lens or amber lens?

[@LightwerkzGlobal]

Drivers side ditch lights are clear lens. Drivers side fog is yellow lens. Passenger side is clear lens .

[@eliasbautista2687]

What’s the purpose for backlights?

[@LightwerkzGlobal]

Just for looks. You can use them as running lights.

[@myrtlemcnappy1641]

Gave ya a follow and got ya on insta too