FIXING My DESTROYED V10 Engine On My Cheap Supercar BMW

Today we're attacking the achilles heal of my cheap V10 BMW M6 and that is the rod bearings. After replacing the coils, plugs, doing a clutch job.. we have finally got the car running. Now the final touch before its officially ready to rip.
Give Lang Racing Development a call for all of your mechanical/race car needs! - langracing.com
They work with customers all over the US and do an exceptional quality job! Tell them we sent you!
Huge shout out to our friends over at ECS Tuning and Turner for helping us with the entire rod bearing repair kit - turnermotorspo...
Https://ecstuning.com
Check out Backspeed Merch - www.backspeedb...
Check out quickliftusa.com and use code: "Backspeed boys" at checkout for 7% off!
Go check out Jegs - @JEGSHighPerformance jegs.com
Make sure you Subscribe so you don't miss out on any Cool Car Videos
/ @backspeedboys
Instagram: / backspeedboys
TikTok: / noahbalboa69
/ lennys_garage
I Bought An Old Mercedes For $100... But Only If I Can Get it Running
• I Bought An Old Merced...
I Bought A STOLEN Twin Turbo V8 BMW For Dirt CHEAP
• I Bought A STOLEN Twin...
I Bought a $5900 V10 Supercar BMW!
• I Bought a $5900 V10 S...
Adding 58HP To My BMW For Under $12 Bucks (CHEAP 600HP BMW BUILD!)
• Adding 58HP To My BMW ...
Building a Cheap $7,500 500HP BMW in 10 Minutes
• Building a Cheap 500HP...
BUILDING an $800 Nascar From an ABANDONED MUSTANG GT!
• BUILDING an $800 Nasca...
I Bought a Cheap 500HP Mustang GT and Brought It Back To Life
• I Bought a Cheap 500HP...
"NASCAR" style BOOM tube UNLOCKS Horsepower! SOUNDS INSANE!
• "NASCAR" style BOOM tu...
Putting a Big Cam in My V8 Swapped Jaguar!
• Building A Mustang-Kil...

[@Fasteddiebreakshearts]

🤤Oh how I love the sweet sound of a NA V10 S85…however I do not miss that pos SMG transmission in my old V10 M6 …I still have nightmares of the BMW Dong 😂

[@AlexFlores-x6f]

These cars are basket cases to say the least…but while they are running 100% which is rare they are very enjoyable 😂

[@iissac22]

I dont understand how they can justify the high prices, with it being so unreliable. Dont know how to get past rod bearing and trans issues?

[@Iwannadancewithsomebody]

Sounds good but it’s pure junk …don’t walk run away from this bmw junk 🏃

[@MBS..]

@@iissac22aftermarket bearings and you won’t have to worry about the engine ever again other than the vanos… also there are aftermarket smg pumps which are way better than stock and makes it more reliable than when it came out of factory

[@jensemann6951]

i just got my first call in an f31, and it sounds like 100 bmw dongs in a second, almost had a stroke man, had to yell at my dad after i picked up to release the pressure

[@nicksel937]

Never straight pipe this engine.... Do an X-pipe of so 100% better!

[@only1809]

No brainer haha I agree for all cars

[@MBS..]

@@nicksel937 doube xpipe to be exact

[@matheus.k7552]

12:45 the intake sound is amazing, you can hear that v10 gasping for air.. amazing.

[@adnanhussain1154]

why was bro daydreaming when the shop guy was talking

[@KevinS-lw8uc]

fr 😂

[@miquelcortega]

because booooring :P

[@V1p3r-]

I was too

[@xd1771]

Guy was spitting knowledge. Id shut up and listen too

[@1stnuggeo]

@@xd1771he was however he just doesn’t give enough energy to keep some intrigued.

[@KarelBeelaertsvanBlokland]

Amazing V10 sounds.... Well done!

[@NorthTexasGarage]

So glad yall got this thang running 💪goats

[@Tigerwolf102onYoutube]

This thing sounds absolutely unbelievable

[@aymansafi4423]

To be honest i never knew what a spun rod bearing ment until I watched this video, Cool

[@NovaBeatsProductions]

Is there not a break-in period for rods? just wondering

[@backspeedboys]

no break in for new rod bearings

[@purplejerry1]

break in generally is for rings/sleeves as they need to seat to create a compression tight seal

[@NovaBeatsProductions]

@ ahh makes sense

[@t8.t570]

the homies from Saudi like your videos boys

[@zanewarren2774]

Pretty sick checking that off the bucket list. I can’t wait for more n63tu content though

[@Brawl_clips09]

On 8:20 when he heard the price he almost fainted😂

[@splux5678]

How many miles are on it?

[@dr_ned_flanders]

When you use a torque wrench you have to tighten it from the handle for it to click at the correct torque.

[@E70dino]

My favorite bmw channel

[@turboattics]

Ecs and turner and literally the best 💯 shout out to them FR

[@anaestereo810]

Patience is a virtue

[@mraceclips]

I love the videos man keep it up 👌🏼

[@shnitzlwayn]

Goad the first start sound❤️

[@aboudsky5405]

Each time the have to say an engine, the f1 derived high revving v10 engine

[@BurntOrangeHorn78]

Motor Fluid Union for your exhaust. Check them on KZbin.

[@TyrellGee]

Plz don’t just straight pipe it long tube headers to a X pipe then straight pipe it its gonna be crazy loud but sound amazing

[@CEODre-ex5yz]

2 X pipes👌🏾

[@broomad]

No straight pipe - keep it original 😁

[@eric_9565]

Please dont straight pipe

[@Rockony]

how much did you paying for that ?

[@yass123]

Manual swap is a must

[@theradgamerx]

The real question how much did it cost to fix that ?

[@Allthingsport]

Probs free or cheap because it’s promotion for the garage too soo they probably come up with a deal

[@mohammedadem3681]

Please straight pipe it 🙏

[@Ahmad_hss]

Sounds like a v6

[@AllBoutt]

Did u just say massive?

[@frenzythebeast]

LOOOOOOOOWWW

[@Motorhead_02]

None of the logically thinking human being will ever have these S65 or S85 or any other bs BMW engines unless its for the KZbin content like this

[@jayd1008]

shop is top notch

[@PythonDNF]

you should add a porsche like exhaust setup to make it sound higher pitched

[@ragnarironspear1791]

The sound id amazing 🤩🤩🤩

[@blessedtoslide2256]

@2:19 i mean n52 would be the last na straight 6... before v8

[@JiggyonFiggy]

bro really forgot about the n52😒😒

[@BurntOrangeHorn78]

There was an N53 too, but not in US market.

[@raul_rd6774]

He was talking about M line

[@raul_rd6774]

And u can't find the n52 on an M car

[@alexhodson8831]

I think bulletproof it's not a good word for bmw engine)))

[@karmenu]

Dude, bearings are brand new. You have to do running in process before doing high rpms! Also you went straight ripping it to 8k rpms, probably on cold oil. Not long until bearings will give up with that rate.

[@desertsandfly2277]

Streten from M539 restorations also did his rod bearings on his E60 M5, he said that it's fine to rev out the engine. You don't need to worry about some break in period.

[@backspeedboys]

I like to live dangerously

[@MeanDeanGarage45]

You don't need to break in the bearings, since there's no metal to metal contact, just the thin film of oil between the bearings and crank. Agreed on revving too high on cold oil though

[@hoost3056]

​@@backspeedboys nah, you like to live expensively😂

[@roccohunter2895]

the love and the sacrifice you have put into this project and the beauty you have gotten from it (nothing is more beautiful than the sound of a V10) I think you should be nominated for a noble peace prize. Lol

[@codereddew1539]

Maybe break in the engine before you rev it to the moon.

[@tarekz9992]

Cool, good work, like the channel but that car sounds like a tin can rattling at high frequencies

[@williamskagen9901]

huh

[@E550Boi]

Stupid waste of my 15 mins... Just a big commercial for the shop. No mechanical content at all... I guess it was too much to hope a BMW owner was actually going to get his hands dirty.

[@jasonfuller8536]

Dude u have A E550 not even a E63 simmer down 😂

[@E550Boi]

@@jasonfuller8536 My other car is a C63 AMG... Whats yours?!?!? Yeah, I thought so.

[@HATTRICKKELLETT]

Commenting is also a further waste of your time, while also benefiting the creator. You seem intelligent

[@dg8062]

Oooooo........ what a badass

[@daidinero7745]

I love how the M6 starts feels like it takes longer than any other car I’ve driven 😂🏁

[@j0siah]

how much of a discount did you get for shouting out the shop

[@andreas-2404]

$3500

[@user-mb7es8bz4c]

Wake up babe, new Backspeed Boys dropped

[@Billybadassboi]

You’re a fruitcake

[@Das_rich]

Like 8 minutes of shop guy just YAPPING

[@yannikair]

Please don't rev cold engines. It hurts 😢

[@REVVEDM3DIA]

13:08 NOOOOOOOOOOOOOOO poor v10

[@banksy215]

Disappointed you didn't do the bearings yourself. Seems to be going against what the spirit of the channel is. Boring video

[@ragnarironspear1791]

Interesting channel 👍🏻👍🏻🇬🇧

[@1995RangeRover]

The bearing shells are consumable...would never own one. Still nice to look at!

[@alexhodson8831]

Sadly it is nothing to do with F1, it was just marketing

[@BurntOrangeHorn78]

Actually the layout was designed for F1 before they went full turbo.

[@PhillipSantos1995]

swap that motor to a single cab truck and make it awd

[@SnekGarage]

You should’ve done the bearings yourself. Sorry but this was a boring video.

[@nickh5450]

Do they do something in this vid ? Last few were boring

[@TylerWhiting]

Sick you guys fixed the car

[@PANTYEATR1]

I don't know how BMW can claim to be "the ultimate driving machine" when rod bearings are a maintenance wear item! BMW hasn't even come with a permanent and bullet proof fix for this? F1 derived heavily implies top notch tech, durability and speed. As nice as that M6 is (and i want one) it seems like a pain in the a$$🤨

[@BurntOrangeHorn78]

You think F1 racing V10 was built for durability? 🤷🏻‍♂️

[@PANTYEATR1]

@BurntOrangeHorn78 are you comparing F1 racing to public Street daily driving? If BMW wanted to sell an F1 V10 to the public, they should have made it reliable for public streets😐

[@TylerWhiting]

PLEEEEEEEEEEEEEEEEEEEASE, PLEASE PLEASE PLEASE BUY A BETTER CAMERA 4K PLEASE THANKYOU

[@VladimirGyorev]

Replace the timing chain also

[@yeetlegosi]

wrong engine buddy

[@SHWELL11]

If I could afford it, I would add one of these to my collection. Glad you decided to keep it.. How much were you asking for it before all the work, if you dont mind me asking?

[@VonnieKid]

Don’t walk run away from this junk

[@atme7375]

Plz make 335i content plz

[@raysorvino2185]

Thing sounds riced ig I’m bored used to v8s

[@claytonbartos6485]

I wish yall could mess with my 09 is250. It’s in such good shape but it isn’t fast car worthy lol but I do have lots of mods for it. And I get it this more a bmw channel.

[@thomas6814]

bro

[@claytonbartos6485]

@ lol I was gonna buy my neighbors old el Camino and send it to cleetus macfarland to use when he said he needed another. Would’ve been cool

[@Nazatione]

Man did the impossible

[@hoost3056]

Hey, put Lubrication Engineers oil and lubricants in that BMW. You will not regret it. It'll save that car front to back.

[@ashishpatel350]

Leave it to bmw to make road bearings a consumable item😂

[@VonnieKid]

Just like your momma 😂

[@kiemagen]

😂💀​@VonnieKid

[@NickPurpp]

Do not straight pipe this for the love of god. Louder doesn’t mean better they already sound terrible with cheap exhausts it’ll just give them a worse rep

[@KevinS-lw8uc]

ur the first person is history to say the S85 V10 engine sounds bad… 😬

[@NickPurpp]

@ I said they sound bad with a cheap exhaust or straight pipe. I own a M6 and I love the sound of it lol that’s like 70% of the reason I bought it

[@NickPurpp]

@ have you heard how raspy they get with a ghetto exhaust

[@KevinS-lw8uc]

@ i assume its because straight pipe is too loud right? eisenmann is probably the best exhaust.

[@KevinS-lw8uc]

@ ive never heard or seen one in real life unfortunately , i just like to watch youtube videos about them. ive never truly realised the sound difference between them, only the screaming V10. but of course each car is different compared to the other so im sure there’s a difference i just never realised. i would go for an eisenmann exhaust, atleast if i ever own one.

[@esrtradajesse]

Bro was falling asleep hearing about the rod bearing

[@anwarmurad3439]

You should have replaced the bearings yourself… content bro, and you learn something new

[@scoobysstuff]

this bmw is super hard to work on but it looks like he did a few

[@wrth]

please don't ruin it with a straight pipe. get a proper exhaust that makes it sound nice not just loud

[@KevinS-lw8uc]

like what exhaust

[@sfisotetyana1649]

Both Emily's-bot😂 Eva-bot😂 Julia klotz-bot😂 Lina-bot😂😂 Honestly I watch your videos everytime you drop but the bot thing motivates me more😂😂

[@Ls_corvette]

Don’t straight pipe it

[@5000RR]

put a heatpad on the oil pan before you start the car,this engine was designed in cooperation with Sauber racing and it should be treated as a racing engine

[@HagWorld]

Video starts at 8:20 ,anytime just here to help fam 🫡🫡🫡🫡🫡🦅🦅🦅🦅🦅🦅

[@chrisjovan664]

I hate to tell you but the m6 is not a supercar.

[@rellj4369]

Dude he said superstar LIKE not supercar 😂

[@VonnieKid]

What do u drive what’s your Instagram Chris?

[@Trelox2]

I LOVE THIS SERIES

[@TheKingAtlus]

first

[@VonnieKid]

You want a cookie

[@abbasrizvi4953]

With a BMW its not how it will break. It's about when it will break. I am now terrified of owning one after the sort of cost that comes with owning one. A BMW as a daily driver is fun as long as that warranty lasts. The minute it runs out run for your life.

[@yungchum2073]

You realize you'll face this with ANY car right? This isn't just a BMW thing. Also having this as a daily driver may not be the smartest thing if you can't keep up the repair costs. Same rule applies with a Lamb or Rarri.

[@jmangtr1113]

If you work on it yourself it’s not that bad. And for even a beginner it’s been easy to learn . I owned an n54 car and now own a b58 car

[@1avn10a3w5jk]

Not all BMW engines are unreliable

[@Salubrious101]

Please stop calling the M6 a supercar. I drive a Panamera turbo which would kick the M6's ass but its no supercar.

[@KevinS-lw8uc]

lol the M6 should genuinely be considered a supercar and the M6 will always sound better than your Hybrid car for 🐱. not even a proper porsche.

[@nicholasf4315]

Lyle Menendez vibes

[@Trelox2]

wdym?

[@titodaddy7]

Good shit

[@JR-pc4cr]

you say at the beginning of the video that you want to have the original factory defective motor bearings replaced. they are not defective from the factory. it's a general service part you change on many bmw m engines at about +÷100,000 km so it's just a wear part like everything else on them, not defective, made from new.😊

[@backspeedboys]

On the M5/M6, BMW made the factory rod bearings way too tight of clearance so they should be replaced around 50K miles which is pretty low. Most aftermarket rod bearings for the S85 have extra oil clearance that way they last much longer than 50k miles. In 2010 BMW revised their rod bearings for the M5/M6.

[@VonnieKid]

Not just defective but actually they are Pure junk 😂

[@BoipeloMolobi-i2r]

17 seconds

[@pavufocsa1837]

twin turbo the shit outta it plssssssssssssss

[@RuneRandom]

Keep it stock

[@hannes-dllrt]

Love the build, but if i were you, i would put on an exhaust from Eisenmann, instead of just straight piping it! Keep the work up :) Greetings from Germany

[@GameVerrsee]

damn i thought u gave up on it

[@JaylenDonDada]

Congratz brother

[@rmfth]

E46 MENTIONED

[@gontsencaagae649]

If possible please super charge it 🙈

[@HadesDevelopment]

guess you gotta straight pipe it now 😄

[@marintonn]

why didnt you show the crank

[@davidhenry4265]

Should of used arp rod bolts so don’t have to do torque to yield