Backwater SWOMP Lite glider kit (mud motor) assembly video

Our all-new SWOMP Lite Glider kits are a great option for those who already have an engine and want to save some money. Check out www.backwaterinc.com for more info!

[@TN.WoodsandWater]

Hey Jake! Thanks for helping me make my purchase on my new 22hp swamp light kit. Looking forward to using it. TN boy here

[@NFCRACKER]

I bought the first 10 hp SWOMP Lite 2 1/2 years ago. This is a great long-tail MM system that seems to be unbreakable at this point. Good Work Backwater!!

[@gregnuttall3637]

This gives me reason to keep my 83 Bass Tracker. This will be so much better for me a Duck boat. Glad I ran across your video.

[@joetalerico5827]

This kit is really nice. Great design and quality fabrication from what I can see. And they did their homework to ensure that everything is torqued correctly to ensure proper loading. Definately over built to last many seasons. Only suggestion if it hasn't been tried would be to include a thin vinyl sheath or vinyl tape to cover the prop shaft threads to reduce the risk of seal damage. Coming from an engineer, this is a throughly engineered and well built kit. Can't go wrong with this product. I'll be saving my money for one.

[@johnfenn]

I often wondered why the Thai long tail boat never became popular in Western countries, and now you guys have done it. A really nice slick thing. Now we just need to pout a V8 on there like the Thais do LOL

[@46north36]

maverick hayes, SWOMP is the model line of motors built by Backwater Inc. It's an acronym for Sand, Weeds, Obstacles, Mud Propulsion (or alternatively Shallow Water Operation Motorized Propulsion).

[@lauramayren7971]

Well done

[@Farmer1953]

you didnt get the bolts tighten before mounting the engine to the boat-that is the bolts holding the tail to the engine .

[@christianjensen3182]

Somewhere between 15:30 and 16:30 the bolt appears to have mysteriously tightened itself.

[@jamesburrell9259]

what is wrong youtube clips do not load

[@martingarza3383]

If threads at tail shaft end were slightly small than shaft seal would be installed easier.

[@lutherbryson2460]

What's the cost? When you tilt the motor does it starve for oil?

[@2000freefuel]

This seems like it would work great with a 406cc 10 Horse Diesel.

[@buddyitzy9899]

Can a clutch be added/is it useful?

[@sumanmondalsuman7635]

All the best Khub valo hoya6a

[@raymondrouthier3920]

Well done

[@matthewzimmerman6081]

I have a 18 horse Briggs motor I'm thinking of buy a backwater kit for it next year. The motor is 12 years old. We are currently running scavengers backwater setup. I wont dis this the scavenger setup at all just looking for a change in mud motors. I would like some input from the backwaters people. Think l I've been watching alot of your videos in the last 5 days. I really like your guys setup. And what's the best setup for a 1436 jon boat thanks.

[@rogervandergriff1851]

I need the information so I can order one!!!!!

[@carmelpule6954]

Here is an interesting situation. The final lock nut is the narrowest one, and this is wrong as when he tightens it other thicker nut is lifted off its face which had been taking the load and so the whole force is now on the narrowest lock nut. I believe the final lock nut should be the thickest and not the narrowest. Just think about it!! Many put the thinest nut as the final lock nut and this is in my opinion very wrong.

[@tedsell1455]

Thin nut is a nylon lock nut ,it needs to be last 🛠

[@johnhutchinson5398]

It’s called, foot pounds per inch. Not lbs per inch.

[@Mila_sania]

What is the blue liquid and what does it do for what

[@josephtufts7649]

How much?

[@coburnlowman]

Don't wanna sound foolish, but what about neutral and reverse with this type of motor?

[@fazecoolmintdisposable8523]

For Neutral you just lift the prop out of the water and reverse where waders and turn it around

[@biggatea]

Are there any saltwater surface drive mud motors?

[@jerickbisuecos3812]

How to order sir because I am here in Philippines

[@stonypointer]

how much is the swomp lite glider kit sir thx

[@williesarmiento6218]

How much the complete set of tail

[@boydhuffman4705]

how about satwater to much sat for water cooling boat motor

[@daynispelaez3551]

Escribo desde Colombia a orillas del río Magdalena deseó saber cuánto es el valor del acople del motor

[@chuckcunningham9653]

trying to hook up a long tail kit to a predator 420cc motors but they sent the wrong mounting bolts can you tell me the size/thread of the bolt holes that are the second set of holes if you start from the shaft going out.. or maybe the middle set of bolt holes... thanks man.

[@joseaparecidomuniz5771]

Chuck Cunningham

[@renzopasquali762]

ma stringete le brugole prima di venderlo ?

[@user-of5jz1mk5i]

Hello very good design could you show the design of the legs .I'm from Russia, trying to make himself analog your swamp buggies thanks for the reply.

[@marthenchien9299]

юрий i am from indonesi. can you show, how to make n instal vertical tail please.

[@heartofthetraitorAMINE]

good job ✌

[@hassanelmaghraby7237]

اكثر من رائع يا سيدى كم اتمنى ان احصل على هذا المنتج كيف وكم ثمنه ؟

[@user-qh9rb5mo9i]

Watch the video carefully. I'm looking forward to a better image

[@miltonalvesdasilva7983]

Ficou top abraço

[@saithasad1794]

And I want this fan plz reply me

[@lauramayren7971]

You did a good gob

[@kunrosy8968]

__ +

[@omcdude64]

That's a lot of weight on the thin aluminum crankcase cover.

[@Multiman40]

I think the weight is carried by the tubular case that holds onto the shaft

[@boydhuffman4705]

Great Salt Lake 14' fiberglass 1994 boat 2,000lbs max full lond look for a gas motor

[@antonioedsonsantos721]

Hello. Brasil, SP, , onde há p comprar?

[@MiguelRodriguez-qj3bg]

Donde puedo consegir uno

[@harryhall6336]

wish ya'll would get it right , a long tail is not a mud motor

[@americancustomrc5359]

Harry Hall yes it is man I've seen them go through it with no problem at all

[@quangothanh9997]

good

[@giaunguyen595]

Bao nhiêu 1 bo lap nhu vay a

[@ajakejake]

Poorly designed handle, it will be a pain to have to unbolt the handle each time you must change the oil. other than that really nice design and simple installation. two thumbs up!

[@kennethwers]

+Jake Chandler They could have easily put the handle under the motor to make oil changing easy.

[@msawyer416]

Most engines have oil drain on both sides.

[@kurmanmaulana6527]

Sip

[@saithasad1794]

I like ur prblm

[@rudy_allvlog]

Not inside one bolt.

[@miltonalvesdasilva7983]

Olá amigo como faço pra adiquirir uma rabeta destas sou do Brasil consegue de dar uma posição abraço

[@rafaelarodrigues8204]

Como faço pra adquirir um

[@rafaelarodrigues8204]

Sou Henrique , quero comprar um desse principalmente a rabeta gostei muito, pra colocar num morto 13 hp

[@Farmer1953]

see 14:45

[@andryevantacuyan1698]

how much for this

[@nengahastinidwitayanti7123]

Berapa harga mesin tersebut

[@user-mi6xt7dv7e]

Как купить ??

[@user-yy8su7hr5i]

С таким мотором только в луже возле дома плавать

[@gvdyg8629]

ورد

[@lamsachlam7816]

Wá chất

[@aminkandangan1298]

Napa bahasa inggris kada mangarti juba bahasa indonesia

[@maverickrhayes]

It's spelled swamp

[@umihaiza3704]

Pk

[@khoitrandang8928]

vrg

[@timwright7938]

Way to expensive

[@sandcreekoutdoors1056]

You get the quality you pay for..

[@daniloechalas9917]

How much?

[@mrkent-thot1318]

How much?

[@rosmadiabdulrahim9134]

How much ?