14’ Lowe Jon Boat to Bass Boat Build

14’ Lowe Jon Boat to Bass Boat Build | Part 2

Рет қаралды 10,831

Backwater Boat Rehab

Күн бұрын

Пікірлер

@brianmarker 27 күн бұрын

That rear seat setup is sweeeeeet. Need one for my boat!

@justinperry4587 4 ай бұрын

Glad to see you gain some sponsors. I appreciate the fact that you do this solo and don’t join with the TBN, though I like those guys too. Keep it up bud!

@BrokeBackBob4559 4 ай бұрын

I think this is one of your best looking projects so far

@Rusty_Nichols 3 ай бұрын

Great looking boat! Would love to see you do a fiberglass bass boat restoration. Keep up the great work

@stephenburns3222 27 күн бұрын

Building my first Jon boat for bass fishing here in Somerville Tn. I’ve got tons of ideas from your channel thanks a lot

@daleley7645 4 ай бұрын

That switch panel kit looks like a great setup!

@GodOfDestructionVegeta27 3 ай бұрын

I'm a black guy from Newburgh NY (the hood of all hoods lol) who recently bought a house in the country further upstate. I just recently bought a Jon Boat and am currently trying to do some mods on it. Your channel has been a huge help! Big fan!!

@ogloudpack9176 2 ай бұрын

Amazing build, so glad to see the channel grow with sponsorship! Love the content don’t stop!

@simeonames7182 Ай бұрын

You make great boats

@cjcollins9808 2 ай бұрын

Love the channel. I have learned a ton and used all that knowledge to do my own Jon boat. It came out very well imo. Next time you should hydro turf the hatches, at least some of them. Maybe that will help it not look so busy to you. You jus have to trim out the latch area. I was able to do mine that way and even leave the hydro turf on the little handles. I had to do mine that way bc the hatches were on the seats, so I wanted them to be covered. But the end result was it blended right in. Just thought id share my experience from my build. Keep up the great builds!!

@johnavonyates4105 4 ай бұрын

Cool video. You really brought that boat back around.

@kvn826 4 ай бұрын

I took a chance on an off brand lithium a while back… zero complaints. Ran a 100ah on my old boat and then bought 2 more from the same company to run my new 24v on my new boat. These off brands can be worth the savings.

@toddnewman68 4 ай бұрын

I enjoyed the heck out of this build. That is one damn nice looking boat. I love tinkering with boats. I have my dad’s mid 70s Lowe and plan to do a similar build.

@spotweld 4 ай бұрын

Thanks for including the links to the product you use.

@lugnutzz75 4 ай бұрын

Nice looking boat and good choice on colors. Hatches are nice but like ya said it looks busy and cheaper. Custom would definitely look off the charts but cost a lot in time labor.

@shannonsneed7648 4 ай бұрын

Shout out from East Tennessee! I have the same boat and will be using a few of these ideas! Great job!

@outdoorsCR 3 ай бұрын

I bought one of the cyclenbatt batteries earlier this year and have had no complaints.

@frankiannelli989 4 ай бұрын

Once again you nailed it !!! I really enjoy watching your builds ..

@1Silverlining 3 ай бұрын

Love your content, Thank you sir!!

@centralcoaster33 4 ай бұрын

It certainly looks good 👍 Your craftsmanship keeps getting better!

@stompylee 4 ай бұрын

Nice build, great switch and battery. I might pickup that switch panel to redo my switch in my boat as I go from tiller to console.

@miltonbrown7275 4 ай бұрын

As always, you have it looking awesome

@markd2858 4 ай бұрын

Nice work, cool to see you getting some sponsors and nice products. Good looking boat!

@healingsnake1 4 ай бұрын

Always love your content.

@redsoul4552 4 ай бұрын

Looks good. I plan on tricking out my 1436, butvI have been planning on that for a couple years. So I guess I will keep watching cause doing what I plan probably won't happen.

@backwaterboatrehab 4 ай бұрын

Could be a good winter project

@randyg6231 4 ай бұрын

Nicely Done !! Always enjoy your Videos !!

@creekcrankin 3 ай бұрын

Man I'd love to get up with you sometime & wrap one for ya. I've wrapped aluminum boats but they just go out into the world & I don't know how they hold up lol. It's also good to see you're still just plugging away on these. I haven't been on Instagram in awhile lol.

@Veemack21 4 ай бұрын

Another nice looking boat ! Great job and the sponsors are dope I’m gone have to check them out! Both things are a must on a boat of any kind. You might need to get more money for all your work.

@chrisbaker6786 4 ай бұрын

Awesome job thanks for the video

@billweaver3702 4 ай бұрын

Man it turned out nice very clean

@tbnationoutdoors-nateeckhold 4 ай бұрын

Looks great brother

@backwaterboatrehab 4 ай бұрын

Appreciate it dude!

@wallaceknifeworkshomestead 4 ай бұрын

Very Nice! I really like the lighting!

@johnhill1165 4 ай бұрын

Nice job

@Cavanpikefishing 4 ай бұрын

Love the video's and tips on your boats you work great on them there sick not that i will have one soon as they don't do them here have the jon American 12 and there only about 4 here but it does the job ,thanks again😊🙏❤️

@pawsnazzy01 3 ай бұрын

The boat looks great. I think you made a mistake on your trolling motor mount. you should have put the open end on the front then it would have sloped the same as your deck it was curved at the front but you could have straightened that to match the bow. Just an old man thoughts.

@jasonjackson3043 3 ай бұрын

Could you make a short or a video showing how to make a John boat stop porpoising? I can’t find one anywhere. Thanks.

@LakeMartinVoice 4 ай бұрын

Question - when you were attaching things to use any glue with those self tapping screws? For example , I am wanting to run some screws to attach a small piece of board to one of my aluminum boats’ benches. I know you’re a fan of self tapping screws. Do you use any glue on the threads when you run it in there? Thanks for the great content!

@coltensawyer6761 3 ай бұрын

Looks like a factory built boat ! I know you have done full transom replacements in past. What silicone do you use ? I know some have acid curing additives so I am trying to avoid leaving it on my boat if it’s gonna do any corrosion. I used DAP ultra clear.

@GunnerOrange-m3c 3 ай бұрын

Awesome video, I was wondering what you would sell this boat for?

@scottd58 3 ай бұрын

Nice job!!! I've been watching you for quite a while. I'm in the process of building up a '98 15' Alumacraft. I was wondering if you could give more information about the 3m Controltac Graphic Marking System material that you used on the motor. You didn't leave a link for it. I went to 3m's web site but couldn't find anything in camouflage patterns. Also is it adhesive or a wrap?

@balamont1150 4 ай бұрын

Hang on!! At 13:01 you ran them wires BEHIND the boat’s metal support rib- don’t you think that will rub the insulation off the wires over time and cause a short?

@backwaterboatrehab 4 ай бұрын

I wouldn’t think so. I covered the wires with a wire loom

@BrokeBackBob4559 4 ай бұрын

The link supplied for switch panel is not available for the product. Excellent show

@backwaterboatrehab 4 ай бұрын

Hmm, I’ll check in on that

@chrisdoesstuff417 4 ай бұрын

Working for me 🤔

@larryalexander4833 4 ай бұрын

I finally found a boat and pulled the trigger. 14 foot 11 inch lund with galvanized trailer with 25 hp Johnson. Needs carpet but overall in good shape. Payed 2900

@backwaterboatrehab 4 ай бұрын

Good luck with it!

@larryalexander4833 4 ай бұрын

@@backwaterboatrehab thanks

@joeymorris59 4 ай бұрын

Get a fish tape to run them wires.it’ll make you’re life much easier!

@backwaterboatrehab 4 ай бұрын

I did use one 😅

@OffGridCrazy 4 ай бұрын

hey there I saw your video where you used Gluvit on a little jon boat. Looked real good, I'm looking to coat an older pontoon log. It doesn't have any leaks that I know of, but I am taking it out to the saltwater for a while and it will need bottom paint or coating of some type for that. I was thinking I'd use that Flex Seal stuff. I used it on my farm to fix a few things and it seemed good. But I've not used in on a boat, any thoughts for me?

@backwaterboatrehab 4 ай бұрын

I’ve heard many people say to not use it, but I don’t have a personal opinion on it myself.

@plantedad3659 3 ай бұрын

Tires!👍

@MrSeminolefan1122 4 ай бұрын

what size outboard is that a 10hp?

@DandBstandsandblinds 4 ай бұрын

Nice

@darylmoore956 4 ай бұрын

Whats a build like this run? Like what are u asking for the boat on marketplace

@backwaterboatrehab 4 ай бұрын

Hard to give an exact number because I used several things that I had laying around. Probably around $5,500ish if I had to guess though

@ghost38901 4 ай бұрын

You ever thought about doing custom work on people's boats they already own? I think you'd do well doing this.

@backwaterboatrehab 4 ай бұрын

Wish I had the time. My regular job keeps me too busy to take on work though

@hookedheavy 4 ай бұрын

hey man i’m getting ready to wire up my 1436 alumacraft how do you know what gauge wire to use for all the accessories?? big question i’ve been having like does 16 gauge work for everything?

@larryalexander4833 4 ай бұрын

Im interested in one of the lithium batteries. Curious how do you charge them. I've heard you cannot use a regular battery charger? Any insight

@backwaterboatrehab 4 ай бұрын

I suggest NOCO chargers like the one I used on this boat. They will properly charge LiFePO4 batteries and also lead/agm

@simeonames7182 Ай бұрын

Your boats are always desirable

@saltgars.g4518 4 ай бұрын

👍💯

@joshcastleman6054 4 ай бұрын

Are you located somewhere near Memphis? I am pretty close and was wondering if you would do a budget build on my 14/32 jon boat (somewhere around 2 grand)

@backwaterboatrehab 4 ай бұрын

Just North of Memphis, unfortunately my regular job keeps me too busy to do any boats for other people. Why sometimes I go a long time between boat builds.

@joshcastleman6054 4 ай бұрын

@@backwaterboatrehab I see what you mean. I am the same way with work which is why I am trying to get someone else 😂 I appreciate you taking the time to respond. I really like your videos and various builds as well!