Bad Chad found another project... 1956 Plymouth Savoy Club Sedan V8 🚨

We found a 1956 Plymouth Savoy Club Sedan V8 for sale that runs, drives, and stops. The only problem is the listing price is a lot higher than we're willing to offer.... 👀
IF YOU ENJOYED WATCHING:
subscribe, leave a comment and hit the like button
/ badchad
CHECK OUT OUR MERCHANDISE HERE:
www.hiltzautoc...
FOLLOW US ON SOCIAL MEDIA:
/ badchadcustoms
/ badchadcustoms
/ macintyrejn
/ ___jolene
MAILING ADDRESS:
Hiltz Auto Co.
RR3
Canning, NS
B0P 1H0
#badchad #1935plymouth #pickuptruck #1935plymouthtouringsedan #customcars #hotrods #classiccars #cars #fabrication #metalworking #badchadcustoms #automobilererpairshops #bodywork #suspension #autobody #evercoatprimer #primingacar #autobodyrepair #rustrepair #paintprep #primer #badchadandjolene #car #classiccars #hotrod #automobilerepairshops #paintjob #paintingcar #conceptcar #behindthescenes #designing #cardesign #sheetmetal #fabrication #rustrepair #custom #customcars #metalshaping #metalworking #metalsheathing #migwelding #lincolnelectric #fabricating #cars #car #classiccars #classiccar #roofchop #coupe #metalworking #metalshaping #metalfabricator #metalfab #plymouth #runningboards

[@chitown1098]

My grandfather had one of these (1956 Plymouth Belvedere), light yellow and white with white and black houndstooth interior as well as a huge white ivory steering wheel and push button trans. The yellow was where the darker brown is on this one and white everywhere the lighter brown/tan is. What a beautiful car. My grandfather took incredible care of the car. He even painted the engine and would work on it himself. Unfortunately in 1972 someone t-boned him and destroyed the car. He and my grandmother were crushed since they had had the car for 18 years.

[@JoeZyzyx]

My first car in 1972 was a 4 door, 1957 Plymouth Plaza. It had been my grandfather's. No seat belts. 318ci engine in it. Fun car. I like watching that movie "Christine" (has the Fury) at times to remember it. No twist on oil filter, but the older can you put a filter into. Mechanical voltage regulator and a generator as I recall instead of an alternator. Bench seats, front and back, and could pile 8 people into it. It was a fun car. Easy to work under the hood too.

[@JoeZyzyx]

I remember the mechanical regulator had to be "polarized" by creating a short across the contacts in order to properly set it for the generator, if you plan to keep the original type charging system in it.

[@RamblinAround]

Car is in pretty decent shape really. It was running well for being out in the cold too. Good start for a project for sure.

[@craigmonteforte1478]

this one Cracked me up my Dad had a late 70# Mopar and this motor and the start up sounded exactly like the one My Old Man had I do not remember the make or model my Dad inherited the car from his Fathers Estate ironically i moved 100 mils and i was given that car to use as a tow vehicle for a MG B i pulled with a tow bar to my new location and i sold the old Mopar when i got settled i liked that car because it still had the old fashioned fresh air Vents under the dashboard and on the highway with a window slightly opened you had a heck of a Vortec of fresh air throughout the entire passenger compartment

[@MoparArtbyautomolove]

This was my car for a few years. Bought it out of a barn in Hoyt, New Brunswick. It originally came from Louisiana. I traded it to the mustache guy for a 1968 Plymouth Barracuda.

[@highlandsoutdoors2041]

Looks like she had a rough life was it a pile when you had er and did the trans leak

[@billhoward7730]

You did a great buy on this car. A lot of the 56 Plymouth had a lot of rust issues. The body on this car is extremely solid. 1956 Plymouth was the first year to have the tail fins, one year before the 1957 Chevy. I am an old Mopar fan and love these older Mopars. Great purchase and great video. Bill

[@victorsweet583]

Your right about the rust...even other cars in the family has a lot of rust issues like some of the old challengers and chargers darts cudas and so on

[@kammyHS]

I’m thinking this guy just wanted to show you everything he has- 😂 Chad wants to talk about the car that’s for sale and there is no end to this guy😂😂😂 out of breath and breathing hard! Chad and Jolene can’t wait to watch this build! Thanks for taking us along on the adventure ❤

[@hotrodray6802]

Finessing the seller is part of the buy.

[@troyleach2095]

That’s part of the deal. Whenever you buy off a collector, you gots to see their goods. If they don’t show you their stuff, then you probably ain’t gonna deal, cause they don’t trust ya.

[@philipbrailey]

Obesity is a problem.

[@1022SLB]

I do not know how other people feel, but I’ve become disenchanted with how these builds often end abruptly and you move on. The cab over, the Bugatti, and now the pickup… I believe many of your fans would like to see a complete build. The truck pushed me over the edge as I wanted to see it taken all the way thru paint. I have a great imagination, but I’ll just move on to One of the plethora of other shows that at least give us our cargasm! Bitchin Rides, Iron Resurrection, Shortys Dream Shop, Texas Metal… Ian Russell and even Richard Rawlins… they all complete the builds.

[@michaelbristol6467]

Richard Rawlings never built a car in his life he just spots the $$$. 😎✌

[@freddieweimann3602]

Bad Chad is a metal fabricator not a mechanic....

[@rijobaabojir2779]

I agree, it is frustrating. Much like tuning in to watch someone bake a cake but who quits halfway through and starts to make cookies. I believe Chad's skills and interests are limited so he concentrates on what he is capable of doing well then moves on. But it would be nice to know in advance how far he intends to take a project before we invest so much time watching him cut, shape, weld and fill over and over. There is so much more involved in building a car that many of us are interested in and would like to see. This is not bad mouthing, just some personal thoughts I decided to share. I still tune in but not nearly as often.

[@michaelbristol6467]

@@williamoliver8883 yeah that's why Gene Winfield goes to his shop and paints his cars because he's a "charlatan". Boy some of you haters are pathetic. 😂✌

[@michaelbristol6467]

You probably never heard of Gene Winfield I bet.

[@davidrogers3016]

Can’t wait to see what Chad has in mind for this vehicle. Chad and Jolene will entertain us again. They set the bar real high with the pickup conversion.

[@THROTTLEPOWER]

I agree David!!!!!!

[@delmarfriedrichs6870]

Sometimes sellers talk to much

[@oldredchevy-hh6de]

Some people might say, "what a shame to not restore it to stock". Little do they know how costly that would be. Many times what it would be worth after. These just are not valuable, high-demand cars. Note, that's why it's sitting around unrestored. At least Chad can be creative with it, while entertaining people, and doing what he enjoys.

[@tjakr3869]

You are correct spend 20K on a 10k car

[@deandee8082]

a guy chops that and he goes backwards in every term of the word..

[@drrick8839]

What’s a correctly restored one worth! $10-12K, assuming it runs, stops and shifts right and has a paint job equal to factory as well as a full new interior? Throwing $12-15K in the fire pit is a lot less work! A lot of people think that a car has high value just because it’s old often get a rude awakening when they offer it for sale ,

[@tjakr3869]

@@drrick8839 same when people sell their old cars. Old used cars are often overpriced. Whenever I consider purchasing a car I always ask, can I make money when/if I re-sell? The answer is more often no especially on old cars.

[@kevinmcleod3741]

Yes I agree with that statement ! Doesn't matter what shape it's in other than new it's just not a collectable high end car !Thumbs-up on doing something creative with it .

[@vincentfalso4687]

Nice deal and I love the design of that car……WoWW! You and Jolene will have a great time making it your own. I would have like to see the other two cars. I kinda like a four door dropped and some 18” steelies with dog dish caps or bullet center caps…. Anyways, they’re yours to fiddle with…. Love em’!

[@bradleymckay365]

That front grill is freaking awesome 👌

[@bbigtn]

I remember trying to sleep in the back window area of our Plymouth Savoy when I was around 2 years old and my older brother and me had to sleep in the car rather than in a cabin with our parents and sister at yellowstone Natl park. Don't know if it was a 56 but that back window area reminded me of that. I rolled off and landed on the back seat a lot. Who knew David Crosby had an old Plymouth for sale?

[@robkayce6964]

Good score on that rare’56 Plymouth! Love it! Love the dashboard. It’s gonna look mean and muscled when you give it the love it needs! It’ll give the ‘57 Chevy a run for its looks and popularity when Bad Chad fine tunes her. Look out! :) Congrats on your purchase. Fair price. You done did good. I know Jim bo is gonna be impressed when he sees her! A good deal is when the seller and the buyer are happy.

[@algreen2242]

What a nice honest car. Great interior. Congratulations.

[@liljohn1064]

Nice find. Should be an easy project.

[@jacklioyd8571]

First thing I saw was, it would look cool with some Packard tail lights. It runs pretty smooth. Looks like a new project. Car seems to be tight when you shut the doors. You got a good deal on that car. Congrats. Jack.

[@THROTTLEPOWER]

Great looking Plymouth!! 😍👍

[@petetap4255]

Need some furry windshields for your mic's. That'd make a huge difference. Great deal on the Plymouth ...earlier comment said it'd be good to pair up with the pick - up. Inclined to agree .Reckon they'd look great side by side with inverted paint jobs...but,the decision is yours,looking forward to the makeover guys 👍👍

[@jimk7882]

Great find. Everything is there on that car and it's all in good shape. You can tell straight away that the car is a good one by the panel fitment. On top of that it runs and drives. This is the perfect type of car to start with

[@chrisholland8843]

Love the straight Wing back good-looking car

[@71treestudios35]

We love you and Jolene and all the hardwork you guys and the Fam put into these cars and memories on wheels keep educating and absolutely killing it you along with a couple others have motivated me to go to school for auto body thank you keep inspiring!!!!

[@marklee81]

22:17 Whew!! You had me worried, Chad. I really enjoy your paint videos and I kept thinking, "That car isn't rusty enough for Chad." It doesn't need a restoration or a huge transformation. Just style.

[@davescheer5038]

🌴this was my grandma’s car her’s was two tone red and black ,mom inherited it after gram passed ,it wasn’t fast but it was trust worthy, this will make a great ride chad and Jolene, 👍

[@joemaderak6449]

I am glad to see that you are not cutting the roof off or chopping it. A nice paint job and slight custom works for me.

[@michaelbuettner6560]

My dad was a Plymouth mechanic. I learned to drive a 52 Plymouth 4 door retired taxi cab. Now I have a 52 Concord Plymouth fastback... Love the Plymouths.

[@williamdahlen1654]

Hello Chad & Jolene. I hope that you both have a great day today. Good luck with this build.

[@davidbellomy8605]

Thanks Jolene and Chad for the ride along! Can’t wait to go along on this journey! Another cool hot rod!!

[@Joe-lj3ir]

Great find. Can’t wait to see what you guys do with it. Thanks for sharing

[@daveanderson2865]

Sweet car. It looks like a car made for the drive ins.

[@simplysimon9868]

Chad the poly motor can be converted to a Hemi. The heads were made to bolt right on. Not sure if you saw Alex Taylor and the Hot Rod Plymouth Savoy, they made a race car in 24 days with a crate motor Hellcat. Great shape car!! Mopar or no car. Nice place the guy has there.

[@ronnieniebrugge8229]

Now him and Jim can go cruise in their 50s cars Love the shoebox looking cars

[@Lewar1979]

Dont cut it please!!! Send it to me.

[@michaelbrookover8018]

Pretty cool you took the time to look at his collection! He was so excited to show you everything and you were not in a rush or frustrated, Classy 👍🏻😎

[@TheTreasureGuard]

That Savoy is a treasure worth guarding

[@sragga]

bought my '56 plymouth savoy when i was 16 as a first car, but it was a flat head 6 three on the tree. whats left of it is sitting on kraal ter off washmill lake rd in clayton park. can see it in the fellas yard on satellite view(red with black roof). lots of road trips with it over the years. lost my winter storage for it and the salt air rotted the hell out of it

[@deandee8082]

something like that here in the states would be like oh $14k to $18k USD? of course here in the USA they're a Belvedere, different paint schemes and trim levels, engine options so forth run a guy at least 3 times that amount for the similar condition.. a dead minter is around $35k+ low mile dead mnter $70k+ ... that one has the big engine so more likely than not holds a premium for that alone, freshened up that car is worth triple that easily... nice ride for sure, the mid 50's were it for the automotive industry, real power arrived, auto trans, limited slip, and unlike any other generation they were the heaviest of all cars ever made, better steel, thicker gauge, heavier genuine chassis, the ride is like no other..

[@leonardhill1218]

Right Rita

[@ate-updesigns9186]

Could be really cool old car..something you don't see every day...im sure if chad gets her...he'll make it really nice...thanks for taking us along...see yas tomorrow

[@robertdehaes7572]

Looks pretty solid and it is rare, got to see price later.

[@ReedThomas71]

why aren’t you showing finishing the truck? Why don’t you ever show completing a vehicle to completion? That’s what I want to see, not this bullshit, starting or finding the next project. The last couple project, what happened to that? You never showed that completed either.

[@vincemurphy6988]

Right on.

[@TheGeorgemccloskey]

@@frankschwartz7405 Yes I'd like to see him actually do some body work which is just as hard and tedious ,the constant cutting with the angle grinder gets to be a bit much it would be a nice change of pace for once and would bring in new viewers who are looking for paint and body videos

[@ReedThomas71]

@@frankschwartz7405 he only done half the truck at a time, so you never saw all that he done anyway. He always worked past the hour it took him to do what we saw. Do you think it only took him 30 hours to get that truck done? Because that is all we saw, not 30 days. I’m not suggest he work on it a solid 30 days, 24 hours a day. I would like to see the entire process however he would decide to do it, Jolene is editing the video anyway so there’s really no idea when the video was really taken. I am assuming these were done the morning before it maybe that morning, but they could have already had these in the can, done a month ago. But I doubt it because of the weather going on with the show matches right now. I just feel cheated not seeing a car to the completion and ready for the road. I want to see the entire process for educational purposes. That is what Chad is doing, teaching the average person not only how to do it, but do it as cheap as possible with what you have on hand, how to repurpose stuff. That’s what I want to see.

[@johncarney482]

My grandmother had same year and it was black I was like eight years old (1965) and I found that you could open the cowl under dash to let in fresh air, I'm always interested in this car and year.

[@rayhall3010]

Bad Chad please don't take this the wrong way , I'm from Alabama, I live here now,, when you visit Jim Bo and like on this video,, you Canadians , talk and do the same as us southerns ,, the only difference is the language, love you guys , I got to spend some time with your guys,, while in the military,, I'm excited for the next build ,, you are great and have proven it , I have every respect for you,,

[@randymcgee9176]

Put the dip stick back in

[@highpeak9512]

Bad 🪖Chad and Queen 👑Jolene congratulations 🎉can’t wait to see what you do with it. Away from New Jersey USA

[@tuat.mvpformallybigd.2635]

That guy was so thrilled when Chad said I think I'll do it. Lol he cranked it before Chad got there

[@robertcolon3021]

Great guy. He looks a 20oz steak away from a heart attack, but boy he’s hustling around that property! Nice place he’s got. 👍🏽

[@markaubuchon2227]

😅

[@jeremiahobryant4337]

Guy gets around better than most guys 1/2 his age

[@Johnnywhamo]

I was thinking the same thing, never judge a book by its cover as they say. Big house on a lake with a handful of outbuildings filled with toys and tools...just...perfect.

[@neilhowes4215]

Not cool bro...c'mon man!

[@robertbragg9364]

That property is absolutely perfect, and this man seems to be very deserving of it. I love what you do, and I enjoy your videos a lot. Be safe and have a good one. 👍

[@bennys.8814]

Another great video thanks guys

[@FransvandenBergeMuziekschuur]

I love those cars. Fixed right and shined up they make beautiful statements.

[@David-uu1oj]

I really like that interior 👍

[@michaelamos2336]

Got to get the fender front fender mirrors for it

[@hotrodray6802]

Those we're after market. Outside mirrors were not required in the USA until @63 and driver side only. I like those little street rod mirrors.

[@donniepayton1460]

I enjoy watching you work on cars.

[@johnblood3731]

Jolene does a great job recording. And the content is very interesting. Can not imagine how good this car will look when Chad works his magic.

[@Projectblackkjack]

you're killing me with the gum!

[@jumpinjojo]

*You’re

[@Projectblackkjack]

@@jumpinjojo thanks bud 👍

[@jumpinjojo]

@@Projectblackkjack You’re welcome.

[@Aaliyahandari]

I find myself coming back to this video every few months

[@mrcaps1971]

What a gorgeous car she is! Here in Australia, anything that old is considered desirable and would carry a price tag 4 times what they paid, and in far worse condition. Are Chad and Jolene still coming to Australia soon?

[@richardrussell500]

I owned a 1959 flatbed Dodge truck with a Poly 318, which had a stump puller transmission with 4.11 gears in the rear. Great engine. Stop speed was 55 mph. Just be advised that finding parts for that engine is hard to come by. Beautiful car.

[@danhanson6577]

Wow great build guys was really hoping you would pair the truck!!!

[@Tootall72]

Nothing beats the old Plymoth script in the logo!

[@MadSceintist]

Please don't destroy that car I have a '55 Lincoln Capri 2 dr. Absolutely love it

[@hotrodray6802]

There was a extremely nice LC 2dr ht here with Louisiana plates. Wouldn't sell it and it finally went to the crusher. 😲😲🤬🤬🤬

[@scottdonna2690]

on its way to be never finished

[@LoneWrencher]

that extra engine would have been nice if you could have gotten a package deal

[@poorfesor]

I had the Dodge version of this two door hardtop, great car even with the 326 engine. Honestly back in the day I never paid as much as a thousand dollars for any car, last car we bought was closer to Fifty thousand. Times do change.

[@fartraveler3345]

In the 80's buying n selling old cars I owned one of these for an hour an a half, same color. Sold it on the way home while filling up. Never forget

[@patchadams4me]

Awesome!

[@jamesfitzgerald2361]

Alright Chad a DODGE fan I'm a mopar guy myself. I like the older ones. My brother restores older cars in Wisconsin. Really like your show keep up the good work you and Jolene. God Bless.

[@tuat.mvpformallybigd.2635]

What has he got in mind for this car? We'll have to wait and see.

[@anthonymurray8025]

I think you got a good deal on that car looks like it’s in pretty good shape

[@wiserman100]

Nice score, and a 2 door too!

[@brianandglendaharkin9457]

318 poly is a great motor have big valves nice Hemi style Rockers . They have a great exhaust not . Maybe fit old style mag wheels an a free breathing exhaust an a good Holly . She needs a good tune an service the box an diff . Leave it MOPAR .

[@kyleperkins7125]

Oh how I wish that I had that car! Please Chad don't cut that one up. Fix the rust and make it sharp.

[@javierdenardo2607]

Kind of like when Arnie bought Christine

[@garrybernardin9719]

If I can make a suggestion on Plymouth Savoy. Flip it.

[@mikerosolack2837]

Please chad don't cut this car up, some are rare and should NEVER be molested.

[@davidlanigan1722]

Chad please don't chop this one up she is in too good a shape just fix it and paint it

[@cannabisticannabisticino2718]

Nice car with tail fins, running engine and interior looks fine too. It will be a good project. Well done guys. 😎👍

[@deandee8082]

you can tell this guy has worked hard to get what he has and tries to stay organized but has gotten to that too much stuff point time to lighten the load.. the where is it gremlin seems to appear out of nowhere, I'm in that same boat a lot as well, "now where did I put that" or "where is that" OMG... try to be as organized as possible, I've come to the conclusion its a matter of having too much stuff, doesn't matter how organized you are or how many cabinets or trays, chests, or containers, at some point its "where is that chest or container".. lol ... gorgeous car, pretty damn good deal, things must be a lot less on the island than in the lower 50, with exchange its a lil' over $5k usd.. you don't find good solid runners of any vintage year for that money here.. why can't I find something like that, that be my daily driver, serious, 1/2" larger exhaust with duals cats and 2 mufflers each side so you cant even tell it's running... straight sleds they are, comfort cars, modern tread and suspension they float down the motorways, fire up that tube radio... lucky

[@wilkins1946]

I was hoping to see the truck finished, It was a good build. But not to see.

[@dirtykustomz]

That’s sweet car love the two tone

[@SAINTBEAZO]

this car would be beautiful in bright green and white

[@kimberlywilliams9757]

That's not a bad find! That car can definitely be made cool! Can't wait to see what you guys have in mind for it. (If you got it) Thanks for sharing! 👍

[@darylmorgan9887]

Nice looking car, cant wait for the next project.

[@joeboxer3365]

the sound on this video you can hardly unerstand and cc misses half of it, the car's a decent looker but can't tell about body patches and running very loud and doesn't sound idling or running smooth and not sure about why the black frame is there unless the one under the car has problems

[@jjock3239]

That is a nice find. The tri-5 cars of the big three auto makers, are high among my favourite cars. I didn't like the 55 MOPARS so much, but I thought they made a big improvement in 56. I hope you enjoy the car.

[@1575murray]

The 1956 styling was definitely an improvement leading into the longer and wider 1957 models. All the big three automakers were going in the same direction while competing for market share. Unfortunately, Chrysler suffered later in the decade from poor quality control and body designs that tended to rust out prematurely especially in northern climates where a lot of salt was used to clear the roads in winter.

[@jjock3239]

@@1575murray I'll second the quality control issues with MOPAR. A buddy of mine, had a 57 Plymouth 2dr Hdtp, and even though the car was only 4 years old, It leaked at the front windshield, and the rear as well.

[@glenbo2464]

Very cool and un common car and model ! Love it !

[@kenmatthews6476]

I do love the dash of that old beast.

[@ghostrider8385]

leave the frame alone,unless its cracked,keeping original is nicer.

[@felinebline7154]

What a super nice straight original car!!!

[@jimlaloggia2094]

Hi Chad my name is Jim I was just wondering I know you just bought that Savoy would you be interested in selling that thank you

[@deepriver4924]

Don’t cut the crap out of it!

[@oldskoolonly]

Lose the gum bro, no body want to listen to that, that was so hard to watch

[@chrishambling1981]

Great score 👍 unique ,what Bad Chads all about cool stuff 😎

[@joebourque4860]

I have a 1955 Plymouth Savoy and enjoy the car not many people know what it is. Thanks for the video Jolene and chad

[@swain00420]

Get it Chad, can't wait to see what you come up with on this bad boy!! Excited to see new content after the truck conversion. 💪✌🤛

[@kevinmcleod3741]

Alot of potential ! This would make a great project car ,, only if it's for the right price .

[@keithruhl3545]

My Dad had a 56 Plymouth. I still remember sitting on my Mom's lap and pretending that I was driving the car by using the radio speaker grill to turn it with. Dad also had some blue lights in the centre part of the grill.

[@waltmarks9720]

Looks decent 👌 👍

[@mikeclendenin612]

Potential great hot rod

[@romandybala]

Chop the roof down to 4 inches , get rid of the fins, turn the body backwards on the frame and paint it purple and brown. weld up the doors and get in thru the trunk. Sweet.

[@mikeellis9720]

Shhhhh.