This could go very wrong... bead rolling a LARGE panel for Nate’s 1977 Ford F100 😬

[@RuoteRotonde-ie1ts]

Beautiful day and wonderful place surrounded by nature. Summer is beautiful. Great job guys 😎👍

[@TerryWhite-cw3nx]

Great job to you all

[@PeterDowd-r9b]

Great Friends Working Together and Supporting Each Other.

[@yarkie1]

Can't wait to see the finished truck Nate. Looking cool from what I've seen!

[@brentplouffe6146]

Love the show! Note for Nate - if you seam seal, I'm sure you know it's easier to take a half cup of water with a good squeeze of dish washing soap, wet you finger before you run it over the seam sealer to smooth out, keep dipping your finger in the soapy water. That way the seam sealer won't stick to your finger. Just an idea.

[@roadstercm6]

Pilots are taught to trust the gages If the tape measure says 21” cut it 21” be done and don’t keep guessing. Measure twice cut once.

[@KL6400]

Nice work guys 😅👏👍😎

[@KyleWorkman-c6u]

Bead rolling by hand on such a large piece is difficult to say the least. Nice work.

[@darrelkinney9856]

Cool video nice teamwork

[@michaelmorrow6853]

Like watching paint dry! Lol

[@colinmyers8841]

Lotsa fast foreward cheers

[@matthewgapper9301]

Love the show guys from nz svg county

[@WarDogs_Dad]

You fellas and Jolene are making quick work of the bed project. Team work makes the dream work

[@brucetodd8993]

Man I love all three of them guys there great together as a team and friends!!

[@rickcapron9353]

Poor Doug. He is a great guy

[@arthurmccarron4379]

Wow. Large. Panel. Turned out. Great. Thanks. ❤❤❤❤❤❤

[@autojumbleusa]

☆☆Nice work! 👏

[@roypowell3450]

Jolene please get Chad a tape measure what he can work with!😜. Nice job Nate on the roller...

[@leonramsey8845]

One without 16th and 32nd.

[@roypowell3450]

@@leonramsey8845 🤭👍

[@FransvandenBergeMuziekschuur]

It's amazing what likeminded people can achieve.

[@thomasmitchell6921]

Compliments to the filmography and editing. Speeding it up during repetitive areas saves some overall time.

[@richardjennex6583]

Good evening everyone and can’t wait to finally met you all and see the rides in person

[@chewyaz]

Nice to see the crew so relaxed and Chad isn't running on high. More please

[@mitchellbennis9236]

Joe, brilliant idea to fast forward the beginning of the video, it leaves more time for the rest of the fabrication work.👍

[@smittysRods-o2k]

looks great cant wait to see the other 2 panels.

[@markplant2184]

Awesome, Thanks

[@bftfcfua2946]

What happened to the RatRod, when are we going to see it Run ??

[@joeblast81]

Nice 👍

[@charlielemmons5525]

Nate should be making all the decisions on this one since it is his build. He also don't waste time getting the job done.

[@paulcreed-r2n]

Friends helping each other out on their rides over the summer weekends, bread & butter basics of the hobby, BUT some still feel the need to pick & moan lol

[@markaubuchon2227]

Beautiful country there Chad and Jolene. Lovely view from your property.

[@peterfavre4022]

A tape measure is hard to watch him use … my lanta… painful

[@richardnelson7098]

It's Canada time let's have a beer And party like it's 2024🇨🇦🏄‍♀️🐕 Go team hiltz.

[@The_Kman]

Corona Beer Time!

[@eddiereeher7594]

😢good show😎👍

[@kathymitch-u9d]

it will go pretty good with somebody else calling the shots

[@LorieStull-mg2go]

🤣🤣🤣🤣👀🤣🤣🤣✌🏼

[@shaunemunday3694]

Love that you can still be boys having a beer helping each other's out on there builds just shows car building is a love not a chore and you enjoy it on your days off love the no stress workshop

[@joesoika2628]

hi Chad if i was to improve on that bead rolling when doing large panels try picking up extension stands with Ball rollers you can put them on both ends of the sheet and adjust them for the height and don't have to worry too much to hold them level with bead roller. Just trying help

[@jeffreymartin8031]

Hey Chad and Jolene how are you doing today my friend I love watching your KZbin videos they are very educational videos and keep up the good work and I like the content in the videos and I like the way you explain things to your viewers

[@SteveYankovich]

Great day getting the bead rolling done, Nate's truck looks like it is going to be cool

[@janmorse8777]

Not a problem for Team Hiltz Go for it 👁 🐅 👌

[@dustinholt7308]

I’m so confused what is trying to be accomplished here?

[@kennethsmith3625]

Building a truck bed for a pickup that has drop suspension so the tires and axle have enough clearance when you deflate the air suspension

[@OldeSchoolRcUk]

Tubbing the rear to allow for very low riding

[@alpeach9480]

A very confused viewer !!

[@mrgreezy1]

Chad and the guys need a 3ft. X 4ft. Work table on casters so they don’t have to Fab everything on the floor.. that must get old.. 🤣

[@timmiller260]

Looking like a exercises show keeping fit in shop 😊

[@dannyjackjones9843]

Love the show and the crew but Chad let Nate do it his way 😖🙄 !!! Feel a lot of the suggestions Nate’s agreed a lot on just because he’s to dam nice !!! Chads quite passive aggressive aswell I’ve noticed on quite a few occasions especially if he isn’t agreed with or gets his own way !! Doesn’t want anyone taking the glory what so ever , even on there own builds 🙄

[@paulmiller1618]

I think chad has been super focused on doing his channel that he is out of practice working with others . Good on Chad for allowing the others guys to shine that's what a good leader does. You bring out the best in others then they bring out the best in you.

[@LorieStull-mg2go]

They all respect what each other does and have no issues allowing the one with the most experience in whatever task take the lead. Why would you question their knowledge on their projects. Makes 0 sense.

[@dannyjackjones9843]

@@LorieStull-mg2go because reading people from a distance isn’t difficult mate . 👍

[@ate-updesigns9186]

Tedious job...bead rolling but the results....😊😊😊

[@NelsonMattoon]

This is the Nate show today

[@russgould7458]

I like the fast forwarding!😀

[@NickDanger1957]

If you run your sheet metal thru a roller before you bead roll it you will have better results .

[@npvj5687]

Cool episode of 3 guys and a girl working together with respect for each other

[@crystolayce]

I've been watching your work for quite a while, and really enjoy your attention to detail and processes and great results. I specially like Jolene's camera work. Jolene, you could show other youtubers a thing or two.

[@pauljochims2215]

You guys are Cooler Than Dang It!

[@lloydfriend1060]

No pieces arrived for the other projects yet? Ok, let me know when they do.😊

[@gwc4020]

The farmers getting it!

[@mikeross5820]

Looks good ladies & Gentlemen. Chad was Worried Nate had Faith.

[@monadking2761]

If you're having trouble drawing the long line, use masking tape from one side to the other. It will be straight if you pull it tight before you lay it down like a snap string. Nice job! Now that's teamwork.

[@davidbickford2539]

Or use a chalk line.

[@frankducatelli2572]

WELL DONE NATE IS BEST WHAT HE DO.

[@davidharper7039]

The next time you need a straight edge, flip your tape measure over and lock it. Hook the body of the tape over the edge and hold the tape tight along your marks. Mark along the edge of the tape measure. Boom straight edge of any length.

[@SOUTHERNBRANDED]

Nice to see friends helping each other on there own projects.

[@martinpersson262]

Messure once,cut 3 times🤣

[@davidbickford2539]

I think I would sink some rivnuts in the square tubing and attach the panels with machine screws for easy access in the future. Just MHO. Great job bead rolling that panel!

[@brentvonaschen7064]

It will shrink a little with the bead roll won't it?

[@gregc4270]

👌

[@user-roadwander]

I think bad chad is getting his zip cut fix.

[@barryromo5216]

It’s too bad there isn’t a way of monitoring and controlling the separate microphones. The grinder sound is not as loud when just in the background. I am not complaining, just a suggestion. I enjoy watching, and sometimes just listening to you KZbin videos while I am working in my shop. Great job.

[@yusofmamat6632]

👍

[@americanfamiliesfirst3747]

You guys use that bead roller quilt a bit. Time to invest in a 36" deep throat bead roller.

[@-donkey_696_]

Chad you need a motor amd table for that beadroller, then you can do the big panels by yourself ,Karl Fishers works great

[@lowbudgetbob1155]

Why wasn't the square tube welded on bottom instead of on the top? No grinding to make it smooth...a lot less work. Nobody would see the welds on bottom....

[@steveskrobot9496]

Try using a Metric tape measure. Perfect fit to the millimetre

[@janevandemark3394]

Is Doug feeling, okay? He has been so quite the last two days. Hope everything is okay. You guys make such a great team. Best Wishes to All of You. J VanDeMark

[@marktheriault434]

Hello from fredericton NB

[@Aaronlewis8846]

Nice job on the bead roll guys. Chad brother get you some tools and stuff to make your life easier.

[@gilbertboulanger8536]

Hi all from Trois-Rivieres Quebec

[@gregnorton5776]

FINA!!!

[@rooster5726]

HUMP DAY🐪...Hey BAD CHAD NATION,.🐓.in the🏠 ... ... MAKE THAT COMMENT & HIT THAT 👍LIKE BUTTON...HELP THE CHANNEL GROW

[@mikegullett1355]

How in the world can that tape be off that many times? Buy a new tape or let the other guys read it. Wasting grinding wheels.

[@LorieStull-mg2go]

🤣🤣🤣🤣🤣🤣🤣👀🤣🤣🤣

[@mikegullett1355]

Will that piece fit in between the rails after bead rolling? Will it bend enough in the middle?

[@robincuff]

Hey everyone

[@jjpol-ih1uu]

when installing large flat panels it is a good idea fit them on a hot day or in a shop that is hot .Less chance to have heat expansion oil canning or sides being distorted .It is mutch easer to hide contraction than expansion in my opinion .we would skin large metal side walls only on hot days less chance to get warping on the walls

[@fredhug85]

Goood & tight 👌

[@foxlyfe5175]

Should of plug welded the braces from the outside and then plug weld panels 😂 the weld puddles are in the way for the panels

[@anthonymilton]

Slow and steady and it won't screw up....

[@brianart3674]

Measure before you cut.

[@ferguscosgrave7510]

Thanks

[@gmc.joesousa4360]

Wednesday

[@timmiller260]

My dad had heating & air Co and we had a sliter table cutter wheels cut sheets in to strip get one

[@JamesStuart-ip2hr]

You might want to allow for shrinkage when bead rolling metal, I know it is not that important.

[@scottrob60]

It almost looked stretched afterwards and it didn’t help Chad being aggressive and put a buckle in the bead!

[@lawncuttingplusdelta]

Its just as entertaining for me to see all the 2 cents the same people put in every day about something negative. makes you wonder why they tune in …

[@scottrob60]

@@lawncuttingplusdelta In my case I did this all my life as a body man and painter so I know right from wrong looks like you cut lawns?

[@lawncuttingplusdelta]

@@scottrob60 yes i peddle lawns lol

[@philliptomlinson1275]

I like where Chad says Doug you staying for another beer I’ll get you to cut that piece of metal 😂

[@scottdyer-yq5hh]

Man u guys are fast hope u pay well

[@yogiss18]

I wounder if you used a bungy cord to hold the cutting on the end of your roller. That way you wouldn't need the air tank to do the holding.

[@fixinstuff9662]

Just think how much you could get done on your own project in 40 long minutes! Yea, no time for the bibble bibble show today.

[@johnbrannum5536]

Make a guide for your bead roller hold material on guide roll your material

[@timerickson8895]

How would you turn it?

[@rickerty444]

What possibly could go wrong on a Hump Day ?

[@bradwoodward4221]

I’d like to see Chad build a pickup truck. Something 20’s - 40’s

[@timerickson8895]

He has. I think was a 29 c cab and made a pick up out of a 4 door car.

[@wmleuschen3586]

No idea on how to read or use a tape measure.

[@Andrew-k1m]

Don't sweat rhe baby!

[@tomsawyer247]

This is why he never uses a tape measure don't know how to read it.

[@charlesdempsey3572]

Does Nathan haver channel?

[@DebbieEvans-s5r]

You know the old saying measure twice and cut once Chad you should know that of all people

[@bullyboyproductions4049]

For the algorithm

[@raywall5712]

I've never seen 2 guys walk so fast carrying sheet metal. 😂

[@buddyhigley2434]

Any thing can go wrong