Baileigh RDB-250 Programmable Tubing Bender with 10ft Indexing Table In-Use - Trick-Tools.com

See it here: www.trick-tools.com/Baileigh-...
The RDB-250 tubing bender is a programmable machine that can bend up to 2-1/2 inch tubing and 2 inch schedule 40 pipe. The touch screen control allows up to 170 programs with as many as 10 bends per program. Save parts with your desired name or part number and recall at any time. All bend data, including bend angle, speed, and quantities, as well as length and rotational stops, can be stored in the memory.
The RDB-250 rotary draw tube bender can bend at speeds up to 9 seconds for a 180-degree bend with 6 speeds to choose from. Bend angles can be programmed up to 360 degrees with a universal bend plate attachment. A numerical readout on the counter bend die makes repositioning and repeatability a breeze when creating multi-bend parts while the quick counter-die release allows for easy removal of tubes. For one-off or prototype parts, choose manual mode for creating bends as simply as pressing the forward or reverse foot pedal.
Included in this deluxe kit is the popular indexing table that is available in 5, 10, 15, and 20-foot lengths. The indexing table assists in producing accurate bends in varying planes, as well as consistent measurements between bends. The positioning carriage is available with a 3 jaw chuck for round material, or a 4 jaw chuck for square and round materials. The carriage rolls on a precision V-block rail and rides the rail using V-block bearings. The positioning carriage chuck can hold material from 1/4 inch to 4-1/2 inch OD and features a hand wheel for adjusting tube rotation. The table rail also features a linear indicator strip for setting accurate distances between each of the 4 included mechanical stops. The RDB-250 Deluxe kit is the ultimate tube bending package for chassis shops and production settings where part to part accuracy and cycle times are key for your job's bottom line.
Dies are sold separately
Warranty: 1 year manufacturer's warranty
Trick-Tools.com
[e-mail]
1.877.VAN.SANT

[@reddmann2216]

That looks expensive