Thank you for the video, it definately shows the machine's capabilities well. It makes it hard to look at other machines after watching.
@RogueFabrication3 жыл бұрын
Thank you for the kind words. We really appreciate the feedback.
@ChrisVDERacing3 жыл бұрын
This helps out massively for knowing what and how your product works much better! Definitely need to get more stuff!
@RogueFabrication3 жыл бұрын
Thank you! They really are easy to use! We appreciate it.
@travisvalcourt87743 жыл бұрын
This thing is amazing hopefully one day I can buy one definitely one of the dream tools for the shop
@RogueFabrication3 жыл бұрын
Thank you Travis. We are always innovating and we will make sure to help you with any tools you get from us!
@ryanmcfann96133 жыл бұрын
I’ve been following for a few months and I can’t believe I didn’t know you guys had a channel. I also can’t believe these vids don’t have hundreds of thousands of views! So much info 😍💰💰💰
@RogueFabrication3 жыл бұрын
Thank you so much. We put a TON of effort into these videos. And we don't monetize them! No ads that pay us, just the minimal ones youtube imposes. We really appreciate the feedback!
@alhubb663 жыл бұрын
Thanks! Some of the Best produced and edited videos on KZbin!!!
@RogueFabrication3 жыл бұрын
Thank you Richard!
@roguefab2 ай бұрын
THANK YOU
@Ziccolumbia3 жыл бұрын
thank you for demystifying this process, I'm restoring a vintage race car and really want to build a modern roll cage.
@larryputter2425 Жыл бұрын
I recently purchased the Rogue Fab 605 bender & just completed my first project, a cart similar to the Rogue Fab cart with the bent square tubing. Never bent tubing before but using the info from this video I made my 4 legs with great success (they all matched perfectly). I’m impressed with my new bender. It was fun to weld together, & It’s easy to bend with. Thanks Rogue Fab for making these videos
@RogueFabrication Жыл бұрын
That is awesome, Larry!!! We're pumped that you were able to nail your first project! That's the foundation for success for sure! -Joe
@timkuch87103 жыл бұрын
Can’t wait to budget in this bender!!!
@jasonwalker50512 жыл бұрын
Great bending 101 video. While I have never used the RF bender specifically the video is a great place to start. One good thing about the RF tools is the large library and customer support available. Made in the USA is a big factor when choosing the right bender. Good job.
@RogueFabrication2 жыл бұрын
Thank you very much Jason. We're trying to share our knowledge of bending, fabrication, and engineering (through free online calculators) with everyone.
@boosteddartls28334 жыл бұрын
Bent a lot of custom exhaust for years and well that’s been a while, today we build from Mandrel Stainless pieces, for cage work this will be awesome! Tailpipes over the axle get fun to not have rattles and to look symmetrical... very nice machine
@nicksweetman27942 жыл бұрын
This video answered a lot of questions I had on my first bends. Looking forward to more info. You can never have enough!
@RogueFabrication2 жыл бұрын
glad it helped! You can always give us a call too if you are ever stumped on anything. -Jarrod
@Pokerbroze4 жыл бұрын
learned to bend tube in the Fab school excited to get home and play with the mandrel and see the difference!
@RogueFabrication4 жыл бұрын
Awesome! We hope you like it as much as we do!!!!
@tomfitzgibbons69473 жыл бұрын
Have been looking at getting a tube bender for my new shop and nothing else compares to the capability and features. Plus with these instructional videos for support it's making my decision easy.
@RogueFabrication3 жыл бұрын
I'm glad we're making it an easy decision, Todd! Thank you for letting us know. We look forward to earning your business and supporting your projects.
@rossschaefer36964 жыл бұрын
Awesome ideas. Will definitely be marking my bend and clamp locations this way.
@RogueFabrication4 жыл бұрын
Glad to hear it!!!
@Zedus-rl9hpАй бұрын
Very interesting machine, which is also relatively simple in design. This seems to be ideal, especially for individual pieces that need to be adjusted
@RogueFabrication21 күн бұрын
Rock on. Thank you!
@tonyabdalla4 жыл бұрын
Thanks for the effort you put into this video. Look forward to more of them!
@RogueFabrication4 жыл бұрын
Absolutely!!!!
@davecarnevale80172 жыл бұрын
I've used a buddy's Rogue Fab bender and it is addictive, can't wait to have one of my own
@RogueFabrication2 жыл бұрын
Thank you Dave! We're glad you enjoyed using it!
@samuelpeirce78782 жыл бұрын
first time bending, bought your m605 machine welded it together and getting started. thank you for the help on the phone in placing the order. it was fast and hassle free. keep the videos going they are great for novices like me.
@RogueFabrication2 жыл бұрын
Hey Sam! That's awesome to read! You're most welcome! -Jarrod
@VR6VR63 жыл бұрын
Will be upgrading to this bender when i can.
@RogueFabrication3 жыл бұрын
Thank you. We will take good care of you 👍
@bzbcustoms45204 жыл бұрын
love this bender I build aluminum towers for boats and custom bumpers and having a blast
@RogueFabrication4 жыл бұрын
Awesome! Contact us if you are interesting in being in a post on our social accounts to gain some exposure :)
@allisonbolstridge61263 жыл бұрын
I would love to have one of these for my shop, so much you can do! Very nice product!
@RogueFabrication3 жыл бұрын
Thank you! We have many more videos planned, we just need to clean up the shop and get shooting!
@tmack40043 жыл бұрын
Thanks for the informative video.
@RogueFabrication3 жыл бұрын
Absolutely, T mack! What part was the most interesting? We can try to expand on it in future videos.
@jordokate4 жыл бұрын
Love the videos, I'm bending up a frame and roll cage for my Jeep with the rogue fab bender this weekend!
@komoto5674 жыл бұрын
just put in an order for the DOM tube for the cage for my 01 XJ!
@jordokate4 жыл бұрын
@@komoto567 Nice! I cut the subframe off my XJ, time for a real frame 😁 I'm going with a hybrid cage I think
@RogueFabrication4 жыл бұрын
@@komoto567 Perfect! Time to make that thing safe for off road adventures.
@komoto5674 жыл бұрын
@@RogueFabrication I'll keep you tagged in the progress on instagram 👍
@hartzco2 жыл бұрын
Great video! Thanks for the tips. I hope to get started soon.
@RogueFabrication2 жыл бұрын
Thanks and you're welcome!
@poffrey232 жыл бұрын
I can't wait to get this bender. I have your tube notcher and holy crap it works well!!! Also have bought all the upgrades for my roller. Thanks for the great American made products! Also thanks for all the cool videos you all have made.
@RogueFabrication2 жыл бұрын
Thank you Poffrey. We're thrilled you like the notcher. Our bender is SO easy to use, you'll love it once you get it. Tag us in your builds so we can see what you make!
@RotorMedic74 жыл бұрын
You guys ROCK! Thanks for the VIDEO!
@RogueFabrication4 жыл бұрын
Thank you so much TJ!!! And you're welcome.
@powdercoatingbyRon Жыл бұрын
l learn something new every time i watch one put the arrow i kind is it will help my thank you great show
@RogueFabrication Жыл бұрын
You're welcome. -Joe
@edh6132 жыл бұрын
Very nice looking bender, you make it look simple and easy. I have only bent tubing a few times and would like to own a bender and learn to use it correctly. Thanks for the video.
@RogueFabrication2 жыл бұрын
Thank you very much, Ed! I'm glad it looks easy to you. We really tried to design an easy to use machine that still won't hold advanced designs from being produced!
@rt45c4 жыл бұрын
Joe, good video, please keep them coming!
@RogueFabrication4 жыл бұрын
Thank you! The encouragement helps, really. So many hours into this video!
@ItsMeeJon4 жыл бұрын
Great tips! I’m loving our new M600
@RogueFabrication4 жыл бұрын
Great to hear!
@coyote83194 жыл бұрын
Great video! Looking forward to more.
@RogueFabrication4 жыл бұрын
Thank you. We will make notching videos soon too!
@michaelrasmussen31222 жыл бұрын
I have a very manual bender in my shop, need this upgrade to minimize waste, especially with the high cost of steel these days.
@RogueFabrication2 жыл бұрын
I know! Steel is SO expensive! Tube is up a lot here and plate is even worse :(
@toddkilanski37813 жыл бұрын
First time ever bending tube was just a few weeks ago. I watch this video and found it was very helpful and gave me a good starting point. Great job guys!!
@RogueFabrication3 жыл бұрын
We are happy this helped and stay tuned we have more videos on the way. - Josh in customer service
@cmrperformance87612 жыл бұрын
Thinking about getting a setup for my business. Seems like the most user friendly product on the market right now. Nice Product.
@RogueFabrication2 жыл бұрын
and their customer service is the best in the biz! Respectfully, Customer Service
@davidmays33333 жыл бұрын
Great video!!!
@RogueFabrication3 жыл бұрын
Thank you so much, David!!! -Joe
@mpatterson41693 жыл бұрын
Great video. Keep it up
@RogueFabrication3 жыл бұрын
Thx. We have another project vid coming up in April!!
@tyler713852 жыл бұрын
I really like the upgradeability and affordability of your bender. It looks well thought out.
@RogueFabrication2 жыл бұрын
Thank you very much, Tyler! Have you seen one in person yet?
@tyler713852 жыл бұрын
@@RogueFabrication I haven’t. I like the build yourself. Have you thought about selling just the machine parts and dxf files for the platework?
@thetravelingwalkers59113 жыл бұрын
I’ve watched this video a dozen times to learn how to use my machine!
@RogueFabrication2 жыл бұрын
It's a solid intro. We'll have more tech coming up soon.
@ernestmurphy38983 жыл бұрын
I learned the clamp blocks remove the barriers to accurate repeatablity or repairing an under bent tube.
@RogueFabrication3 жыл бұрын
Absolutely!!! Make it EASY!
@wrecklezz1_Tuning_Motorsport4 жыл бұрын
Can you guys do a video on making the driveshaft loop over please I tried follwing the. Write up but I understood my first side , I did get the shape just my measurements to go each side was short on one side, thanks
@RogueFabrication3 жыл бұрын
We definitely will make a video of it at some point.
@brianschumm30353 жыл бұрын
Really appreciate this detailed video! Starting with the right tools is the way to go…..hoping to get an order in soon!
@RogueFabrication3 жыл бұрын
Thank you Brian! What are you going to build first?
@brianschumm30353 жыл бұрын
@@RogueFabrication What wouldn’t I want to build….haha! Prerunner front bumper for my Silverado, front rear bumpers for my rzr. I would love to do my own cage for it as well! 🤘🏻🤘🏻
@tripwheelerton24172 жыл бұрын
First time looking into this and it is really awesome
@RogueFabrication Жыл бұрын
Thx, Trip! It's a sweet setup for general fab work!
@matxhew692 жыл бұрын
This thing looks so awesome!
@RogueFabrication2 жыл бұрын
Thank you Matthew! They are really easy to use too :)
@dustinlucas35793 жыл бұрын
Nice video. I've never done any tube bending so it's nice to see a "101" series. Been a welder and a fabricator for years, just nothing with tube bending. You guys make it look easy.
@RogueFabrication2 жыл бұрын
Thx Dustin
@humanbeing64236 ай бұрын
I've done it. But with a lack of proper training I sucked at it at first. I finally figured it out on my own but it's very important that you get proper training so you can learn it the most effective way.
@JohnRoberts-pm3bx2 жыл бұрын
I’ve got jd2 old model 3. I’d love to have one of these benders. Just for ease of bending. My brother has one of these and it is great. Been buying some swag hopefully get a nice freebie lol.
@RogueFabrication2 жыл бұрын
Thank you John. We're trying to make space saving equipment that is fun and easy to use.
@gabevancappellen60904 жыл бұрын
Thanks for the video, looking forward to getting the Model 600 soon.
@RogueFabrication4 жыл бұрын
Thank you! Hope you enjoy it!
@lestergillis81713 жыл бұрын
The only time I've seen 3-D tube bending like that was 30+ years ago at an exhaust shop in Chesterton, IND. Me thinks that place was called "JACK'S MUFFLER". They had an old power bender somewhat similar to to the way yours works. They had a rookie making parts on it, so he would occasionally stop at the end of a step and ask questions from one of the seasoned techs. Me thinks they had instructed him to do that to avoid excessive $crap.
@RogueFabrication3 жыл бұрын
Yeah I bet. You can easily scrap 10x your hourly rate if you're "good" ;)
@lazyhoundracing96212 жыл бұрын
I'm on the fence on buying the software but I think it would be an advantage for me. I'm building a 53 Chevy pickup drag and drive with a 1000 HP 6-71 blown, nitrous Chevy I6 292. I have extensive tubing bending on the chassis and roll cage and little experience with bending. Thank you for your time.
@RogueFabrication2 жыл бұрын
sounds awesome! Visit roguefab.com to get started.
@anthonybranco87183 жыл бұрын
Nice!
@lms3732 жыл бұрын
I wish I had seen this year's ago. We did a whole lot of winging it when I started bending tube.
@RogueFabrication2 жыл бұрын
Gotta start somewhere lol!
@jessehalfacre65432 жыл бұрын
Great video! Watched it a couple times. Wish I could afford it maybe win one of these benders!
@RogueFabrication2 жыл бұрын
Thanks Jesse. This was our first really serious editing endeavor. I'm glad you enjoyed the video!
@palmplaza8123 жыл бұрын
Great video
@RogueFabrication2 жыл бұрын
Thank you!
@w.o.b.61143 жыл бұрын
I wanted to say thank you for the video and your website content. I desired to see you machine in action, but the "Tech" section of your site was an added bonus. I feel like I have quite a bit of catching up to do. I have been looking for a bender and really like the design of yours. My shop is almost complete and I actually designed it so I could add a vertical bender (17 ft ceilings).
@RogueFabrication3 жыл бұрын
Awesome! Yes, tall cielings can help. Kost roll cages and other motorsports projects are easily accomplished in 10 to 12 foot cielings, but nothing wrong with a few extra feet!
@DragonsTaco4 жыл бұрын
Thanks for the video! I had no idea Corey Feldman was a fabricator. :-)
@RogueFabrication3 жыл бұрын
Haha
@tannerutah2 жыл бұрын
Cory Feldman 😂
@DC__Woods9 ай бұрын
Great quality video. I'm looking into that bender as soon as I write this comment. However, I feel like the ball was dropped, slightly. When it comes to measuring for bends it wasn't clearly explained. I still don't understand how much pipe would be needed for the bend. Also, where to start the bend wasn't explain too.
@RogueFabrication9 ай бұрын
We will definitely shoot a much more detailed video. It may be a while, but expect to see it here! -Joe
@DC__Woods9 ай бұрын
@@RogueFabrication Thanks. Subscribing!!!
@Travis16373 жыл бұрын
Very impressed with Rogue benders, definitely on my wish list!
@Travis16373 жыл бұрын
Would certainly come in handy on my 71 Super Beetle Baja build
@polanco7602 жыл бұрын
On the to buy list. Trying to start a Fab shop in SoCal
@RogueFabrication2 жыл бұрын
Check out www.roguefab.com/ for great package deals!
@codyolive31274 жыл бұрын
Awesome bender and videos. Just bought an m600 and couldn't be more pleased. I also got the bendtech software as recommended. It seems like some of the longer pieces with s bends are likely to hit the floor when loading the bender. Any tips
@RogueFabrication4 жыл бұрын
Check out this video, we do a full 3 point S bend on a piece about 14 feet long in a very small space. We do move the bender a little to accommodate the length. kzbin.info/www/bejne/q3ysl3qMl8pli7M
@codyolive31274 жыл бұрын
Awesome. My piece is just a little longer so I mounted the bender to a transmission jack I've modified. With an adjustable base height its perfect
@landlockedviking2 жыл бұрын
Man I think I need to start saving for one of these!
@RogueFabrication2 жыл бұрын
They start at $925 with a 180 degree die (at this time). Let us know if you want a quote. Full catalog at roguefab.com. Thank you Viking!
@erwerks6254 жыл бұрын
@5:07 you guys state that you can resume any one of those bends since you still have the clamps in the same position. That's great and I'm really happy I can continue to bend at exactly the same spot without removing the clamps. However, I'm curious to know how we get to that first bend if the second clamp is within the radius section of the first bend? Isn't it preventing it from even going back into the bender? Can you clarify what you can actually continue to bend and show us a demonstration perhaps in another video? Thanks in advance! Great videos by the way!
@RogueFabrication4 жыл бұрын
If the clamp is in the radius of the bend you can still resume EITHER, but not BOTH. You would have to remove the other clamp in this uncommon case. I hope that makes sense!
@iiedwinii4 жыл бұрын
Rogue Fabrication I appreciate to response & yes, it makes sense.
@cocarr13 жыл бұрын
Hope to get one!
@mitchellgarcia3532 Жыл бұрын
Excellent information, now I need to learn more software. Sketchup isn't working.
@_kline95714 жыл бұрын
Will this Bender bend anodized aluminum? And how big of aluminum will it bend.. thank you I just subscribed
@RogueFabrication4 жыл бұрын
We only test raw 6061 T-6. Up to 2" OD.
@steveharbour45992 жыл бұрын
I really need to get me a bender!
@vinnbrock3 жыл бұрын
I'm subscribed! I'd really like to see more technical videos like this!
@UFOBUILTCO2 жыл бұрын
Awesome video ✔️
@RogueFabrication2 жыл бұрын
Thanks for the visit
@dangatto86662 жыл бұрын
Bending 2 90 degrees with outside dimension of 18 inches. do you have to find out the center of each bend, or go by the outside of the shoe? Good job, by the way.
@RogueFabrication2 жыл бұрын
check out this awesome free calculator on our site. Scroll down to double 90 symmetrical. www.roguefab.com/design/
@ccarp693 жыл бұрын
Thanks for the video! That would be a very nice bender to have.
@RogueFabrication2 жыл бұрын
You bet!
@tylercernik2 жыл бұрын
Good benders for sure
@RogueFabrication2 жыл бұрын
Thanks Tyler
@timeandmoney620 Жыл бұрын
Built my exo cage on my Toyota with one of your benders!!!
How do you determine the radius? Great video, thanks
@RogueFabrication3 ай бұрын
A basic rule of thumb is you want your radius to be at least 3x your material's outer diameter. If your material has a very thin wall you may need to go larger to prevent excessive deformation. You can also check out our chart here (www.roguefab.com/tube-capacity-chart/) to see the minimum and maximum capacity for just about every die we make
@mylesloan3 жыл бұрын
Great video 👍
@rockinnathan3 жыл бұрын
Can you do stainless exhaust tube with these? Do you ship to UK?
@RogueFabrication3 жыл бұрын
Yes, up to 2", with some limitations, and yes. This isn't an exhaust bender per se, but it is very flexible.
@rockinnathan3 жыл бұрын
@@RogueFabrication whats price and shipping to the UK?
@RogueFabrication3 жыл бұрын
Pricing is on our web page. Let us know what postcode, and what bender/package and we'll get you a quote. Our web page can calculate shipping nearly anywhere in the world. Did it not return a rate?
@tonybush24 жыл бұрын
Is there a good way to account for leg lengths in a bend. I know how Many inches in overall bend. But without a sample bend is there a somewhat easy way...
@RogueFabrication4 жыл бұрын
You mean the length of tubing in a bend? Yes, our web page explains it in our bending 101 article here www.roguefab.com/bending-101/
@tonybush24 жыл бұрын
@@RogueFabrication no just were to place those Mark's on the tube to get the correct distance away from the roof line and interior..
@dREaDneck_Moto4 жыл бұрын
Bend angle X CLR of die X .01745 will give total amount of tube in bend from tangent to tangent.
@ltlbull24783 жыл бұрын
I am new to using a pipe/tube bender and I am pretty much sold on the M600. I will be bending anodized aluminum pipe for marine purposes (towers/rod holders/etc.). Any advice? I also have a saved order on your website (#33963). Again, any advice would be appreciated. Thank you.
@RogueFabrication3 жыл бұрын
We recommend our UHMW pressure dies for anodized AL. We also can make whole dies out of Delrin if needed. They are made to order (nothing else we sell is).
@mathiaslux73783 жыл бұрын
I would love to have one of these
@lannesdcful3 жыл бұрын
Great info
@Mikefestiva4 жыл бұрын
Great video 👍 I just subscribed. I have been looking to buy a tubing bender and the Rogue looks like it’s on a entire different level compared with other benders on the market! I’m completely new to tubing bending so I’m going to check out some of your other videos 👍
@RogueFabrication4 жыл бұрын
Thank you Mike! Have you already seen the huge tech section on our web page? What will you be building once you start bending?
@Mikefestiva4 жыл бұрын
Rogue Fabrication Thanks for commenting back 👍 I have built a lot of machines from a bandsaw mill to building a UTV out of a old quad and built a hydraulic dump bed for it. I’m actually in the process of building a mini 4x4 articulating dump truck for my property, I used all Subaru running gear for it. I’m up to part 8 on my build series about it so far. What I plan to build when I get a bender is a stout 4wd side by side using once again Subaru running gear. Again I will be making a build series out of the side x side build. I have checkout a lot of info on your site, I just need to read up on what size dies would be best for my next project, I always work with square metal so I’m a bit new to fabrication with tubing. Take care
@RogueFabrication4 жыл бұрын
Holy cow. That is an interesting list of projects. When you say articulating, you mean articulating for steering, right?
@Mikefestiva4 жыл бұрын
Rogue Fabrication Yes it steers in the center hydraulically and also pivots at the same joint so the front and rear axles move independently. The center joint was quite complex to get everything designed right because the drive line runs though the center of it also. Take care 🙂
@Replay_softdrinks2 ай бұрын
I have done it
@RogueFabrication2 ай бұрын
Rock on! -Joe
@dudefrombendor.25793 жыл бұрын
hey Joe, are you going to a tubeing die for 2 1/2" thanks
@RogueFabrication3 жыл бұрын
We absolutely will at some point, but not for the m600 line. The 600 means 6" max bend radius, and that isn't big enough for most applications on 2.5" OD.
@77MacFam4 жыл бұрын
Sub'd Very Cool...Thank you for taking time to make these videos. Come on drawing!!! I'm feeling lucky on my Birthday Month.
@RogueFabrication4 жыл бұрын
Good luck! Don't forget to tune into the live winner announcement. If you're there when we call your name you get extra $$$ ($25-100).
@SHOWERSTVBIZ Жыл бұрын
How much does this bender go for? I am in Ghana and would love to buy one for my shop. Kindly include shipping cost to Ghana
@mertkars14639 ай бұрын
what is the name of the device that you use for seeing the angles?
@RogueFabrication6 ай бұрын
That is our angle cube! You can get yours here: www.roguefab.com/product/tube-rotationindex-gages/
@cryptosully23572 жыл бұрын
Yes, I have a bent tube. I'm looking for another bender. I want one I can use with cad. one that will not leave a marker or deform the tube much at all or not at all. I would like to talk more about your bender. tired of watching videos. also, one that isn't loud. omg some are so loud. also would only want one bender that does heavy and thin wall tubing.
@RogueFabrication2 жыл бұрын
Unless you spend 10x the price of our M625 mandrel bender, you won't get a broader wall ratio range (from 2" x .083/.065 up to .250 wall). Call us. Let's talk. 503-389-5413
@Shkanky3 жыл бұрын
What’s the Max OD tube that can be used with the M600?
@RogueFabrication3 жыл бұрын
2" in standard applications. We have squeezed 2.25" into it also.
@adamnorthup16202 жыл бұрын
I should have added extra clamps to my order!
@RogueFabrication2 жыл бұрын
They ship 2nd day air for $10 ;)
@donovanpatton6422 жыл бұрын
i was a sparky for many many years
@RogueFabrication2 жыл бұрын
Nice
@donvaught7344 жыл бұрын
I use cheap conduit from the box store for mockup.
@RogueFabrication4 жыл бұрын
I know a really gifted fabricator who also does that. Greg Leone of WMD Fab. It is a good tactic.
@ChevyK5blazer3 ай бұрын
You seem to know what you’re doing. I’m new to bending pipe. I want to buy a bender to make a roll bar for my Blazers. So much to learn. Any recommendations on what bender to buy. I don’t want to go cheap. How much is a set up like this ?
@RogueFabrication3 ай бұрын
Hey @chevyk5blazer you can get a basic package from us with our standard bender, hydraulics, and one size die set, for about $1500 before shipping. Feel free to email us at sales@roguefab.com to get a quote!
@ChevyK5blazer3 ай бұрын
@@RogueFabrication I’m definitely going to look into that thanks for replying. I got so much to learn
@isaivazquezzamorano8618 Жыл бұрын
Esa máquina si me gusta es rápida las otras k usan aire son lentas y muy ruidosos
@RogueFabrication Жыл бұрын
Si, hay dos aqui. Este maqina puede usar aire o electricidad por los hydrolicos. Gracias. -Joe
@artursplataiskalns71417 ай бұрын
How about filling tube with sand and welding both ends, wont it help, too much hassle I guess? 😁
@RogueFabrication7 ай бұрын
Sand is not worth the mess and time. Depending on technique, you can make (and heat) a pressure vessel (unsafe) when you weld caps on a tube packed with wet sand. The industrial solution (under $100) is an internal metal mandrel that is 100% removable. It's called cerrobend. We have a video on it here: kzbin.info/www/bejne/Zn-6h2WliN5jeac Or get the only mandrel bender in the world that is remotely affordable (we make it right here in Oregon!): kzbin.info/www/bejne/npavZquqbNhknqs -Joe
@jessestaehler6450 Жыл бұрын
One day!
@argentosebastian9 ай бұрын
Can you bend 1.5 / 2mm aluminum tube? Thanks
@RogueFabrication3 ай бұрын
We have only rated our machines for .120 wall with a mandrel for 1.5" aluminum. This number is based off others testing and we have not actually tested thinner ourselves.
@hallkbrdz3 жыл бұрын
What is a good bender for smaller tubing with tighter radius bends? I'm looking for something to do 0.75" OD x 0.083" wall and 0.5" steel tubing for kart seat supports with tighter radius bends than larger tube benders - and not finding anything.
@RogueFabrication3 жыл бұрын
How tight of a radius? We currently offer a 3.5clr and that wall thickness would be no problem for it - Josh in customer service
@hallkbrdz3 жыл бұрын
@@RogueFabrication The bends are 3clr. I'll keep yours in mind in case I strike out since it is close. Thanks...
@RogueFabrication3 жыл бұрын
@@hallkbrdz If you have any more questions I can respond faster at sales@roguefab.com
@RogueFabrication3 жыл бұрын
We also make custom dies. We can make a 3.0 CLR. Or a 2.875 CLR (which will be about 3.0 CLR after the radial spring of the material is considered). Just depends how exact you need to be. -Joe
@Sidetrakn3 жыл бұрын
Dammit!... to the scrap bin or as it is known here... art project spares. I have lots of art project spares.
@kingcrypto86297 ай бұрын
I wish I could afford one.. how much $ ...or any affordable machines like this
@RogueFabrication7 ай бұрын
Get pricing at RogueFab.com. They are very affordable for a US-Made tool with this level of performance. You can get a complete machine with a 180 degree die and hydraulics for under $1500 at the time of this post. Sorry, but I have to also post this, we have trolls try to leverage us from comments with numbers in them: DISCLAIMER: THIS IS NOT A CONTRACT. Our pricing is subject to change and is subject to full terms and conditions at roguefab.com.
@beauvrt4 жыл бұрын
Hello, I just opened my 1.75 dies and they have a shoulder machined on them unlike the rest of my dies. It seems to be off center?
@RogueFabrication4 жыл бұрын
Yes, that is intentional. It is just to stay out of the way of the electric/hydraulic auto bend stop system. In case you add it later.
@beauvrt4 жыл бұрын
@@RogueFabrication Thank you for that. I was not sure. I measures the thicknesses of both sides with some calipers and it was the same so I ran it. One more thing, with the 1.75 set I recieved 2 pressure dies. I think for HD bends with hd kit, but I only have one 1.75 clamp.