BAKUGAN REPAIR TIPS AND TRICKS

Here are my best tips and tricks to fixing your Bakugan!!!
Magnet Info: www.first4magnets.com/us/blog...
I SELL BAKUGAN!
My eBay: www.ebay.com/usr/jessmorga-969
My Mercari: www.mercari.com/u/807976342/
Send me a tip! streamlabs.com/joystickjesse1...
Join my Discord: / discord
My Instagram: / joystickjesse
My Twitter: / joystickjesse
My Reddit: / joystickjesse
Have business with me? Email me at: [e-mail]
Background Music:
Autumn 2011 by Loxbeats spoti.fi/34tPBBO
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/autumn-2011
Music promoted by Audio Library • Autumn 2011 - Loxbeats...
Memories of Spring by Tokyo Music Walker / user-356546060
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/_memories-of-spring
Music promoted by Audio Library • Memories of Spring - T...
Track: Empty - Land of Fire [Audio Library Release]
Music provided by Audio Library Plus
Watch: • Empty - Land of Fire |...
Free Download / Stream: alplus.io/empty
Fluffing a Duck by Kevin MacLeod incompetech.com
Creative Commons - Attribution 4.0 International - CC BY 4.0
Free Download / Stream: bit.ly/fluffing-a-duck
Music promoted by Audio Library • Fluffing a Duck - Kevi...
Ohayo by Smith The Mister smiththemister.bandcamp.com
Smith The Mister bit.ly/Smith-The-Mister-YT
Free Download / Stream: bit.ly/_ohayo
Music promoted by Audio Library • Ohayo - Smith The Mist...
Track: Our Leaves in the Breeze - Artificial.Music [Audio Library Release]
Music provided by Audio Library Plus
Watch: • Our Leaves in the Bree...
Free Download / Stream: alplus.io/our-leaves-breeze
Track: Indigo - Nelvian [Audio Library Release]
Music provided by Audio Library Plus
Watch: • Indigo - Nelvian | Fre...
Free Download / Stream: alplus.io/indigo
Weightless by LiQWYD / liqwyd
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/liqwyd-weightless
Music promoted by Audio Library • Weightless - LiQWYD (N...
0:00 Intro
1:44 Getting to Know Your Bakugan
5:14 The Magnet
11:56 Springs, pins, and screws
18:21 Outro

[@JoystickJesse]

I hope that this video can help with some of the problems you guys are having with your Bakugan! I also want to state that most of these fixes and tips are from my experience over time. I can 100% be wrong in some cases, though I feel this information (particularly about magnets) is backed up by enough sound logic. Feel free to add additional tips and tricks in the comments! I would also be more than happy to make more videos covering repair tips and tricks!

[@caioabreu995]

I have a doubt ? what key is used to open a bakugan and, i was thinking of buying one for the second time in my life but i don't know if it would last very long because i broke my maxotaur and i was so sad i never bought it again

[@Averell-it6vg]

The thing about Bakugan that everyone should know: it's most of the time about clips that hold Bakugan closed it breaks

[@acksz95]

True. My darkus dharak has a broken piece, now the tail doesn't stay in place

[@IrishBrotato]

Ngl I wish they'd introduce OG Bakugan designs Into the toy line...Ik they won't but I'd love a b3 size delta drago dual hydranoid og drago etc

[@slimeking5295]

Finally! Somebody has made a proper fix and repair video. It is very useful and informative. Thank you! So far I have fixed some of my bakutechs magnet problem and springs problem (which was pain in the butt to do)

[@JoystickJesse]

Bakutech have so many little parts! Repairs on them are always a pain in the butt!

[@webber0735]

I like that thumbnail Lol Really helpful video. I like how far the community continues to go when helping one another with fixing our bakugan.

[@JoystickJesse]

Thanks! I’m hoping the video is general enough to help everyone! A lot of Bakugan repair is sooooo much trial and error!

[@LouiseSlugger]

So cool to find a channel with such nostalgic content. Used to be a fan of Bakugan as a child and still got a lot of toys. Remember going to the store with my mom to buy new bakugans. Favourites are: Darkus Infinity Helios(max 1150g) (also got his darkus battle suit from the anime), haos Reptak baku sky raider(1020g), darkus Darak(610g), ventus Fusion dragonoid baku sky raider (800+30+70g), Pyrus Titanium Dragonoid (750g), darkus Razenoid (max 950g).

[@maxislate5741]

I was fixing my crystal clear Bakugan and I see this one up , well I recommend buying broken Bakugans to fix the old one , once you get the parts it’s easy

[@slothfulsea7296]

This video is a major help. I wanted to fix my Darkus Siege because it didn't want to close all the way but the spring and magnet part help most to me.

[@arthurcampos7723]

Hi, thank you soooo much for making this video. It's super helpful 😮

[@Bakutwins]

Thank you for making this video! It is super in depth and helpful for all of us 👍👍👍

[@JoystickJesse]

You're very welcome!

[@saoandfatefan9322]

Just found this vid today and realised it could help me with my b2 pyrus dual hydranoid, gonna test it's magnet as it struggles to open (got it second hand)

[@brandonscott5544]

EXCELLENT BAKUGAN REPAIR AND FIX.

[@Bakugan_fan]

This video is very helpful! :D

[@JoystickJesse]

Great! I'm so glad it can help!!!

[@willfanofmanyii3751]

Thumbnail be like: Drago: "Wyvern broke me..." Dan: "Congrats."

[@RD-tu1td]

You can actually see on some of the open core b1 the magnet can also just move to the side. Seems weaker because it’s not aligned properly

[@zadock6370]

I bought a ventus skyress whose head would not stay in all th way in ball form. I mean it is clearly latching something, but it is not staying down all the way. I took it apart, i took out the clip/magnet part, put it in BACKWARDS, then I put it back together, then I kid you not IT FIXED THE PROBLEM!! Sure the head doesn't stick out quite as much when it is open, but it is almost unnoticeable. the fact that this skyress works better with a part put in backwards is flipping hilarious to me. nothing seemed to be broken or worn or anything; I think it was just bad manufacturing on their part. But what do I expect from a japanese exclusive skyress that was part of a gatcha system with no outside paint except the element symbol.

[@laverne4545]

Hi! I have a nillious ultra that has its head loose, i think it’s the springs that are the problem, or the pins, do you have any recommendations?

[@_WiZ420]

I am searching everywhere I can to find whatever information I can find about these flathead circular pins that you said you don't typically mess with. This has to easily be the most grueling process of everything I've attempted in regards to repairing Bakugan, and the worst part is that my only issue is that a couple are loose. I don't even want to take it out, but moreso tighten it without breaking the rest of the piece in the process. Is there a tool that makes it easier to at least tighten? I am positive my hands would destroy at least something on impact if I tried.

[@vienlacrose]

I use a tsumi proglass microelectronics tool kit. It comes with a bit that can open proprietary screws and several smaller heads that can be used as a makeshift punch for friction pins.

[@vienlacrose]

For the flat pins, the only good way i've found to get those out is to drill the opposite side of the pin and force it out using pressure from s smaller screw bit. i wouldn't bother tbh, because decade-old plastic might not survive being manhandled like that.

[@vienlacrose]

Replacement springs can be reliably sourced from mechanical pencils. A good practice for extracting and working them involves extracting them with a set of two needle nose pliers before straightening them using a wire gauge cutter or the aforementioned pliers and some hex keys. After that, measure the depth and clearance of the area on the part that needs the spring. If you paid attention in physics class, there's an equation that you can use to right size or design a spring strong enough to move the part, but if you dont feel like it you can ballpark the number of coils you can fit in the joint so long as you're willing to accept the chance of it breaking. Keep in mind that springs for 0.5 pt graphite pencils tend to be too strong because of how thick they are. The smaller the cartridge, the thiner the spring.

[@mrbeastfan8079]

I'm thinking of a bakugan doctor character

[@ElyseSheek]

My new nova Baku pegatrix broke by sitting in my car :’) the tail spring got loose… been trying to tighten it without disassembling… I’m so sad he was my favorite one

[@christiandragnel6591]

hi guys quick question how to fix leg on bakugan my altair ventus has a stuck up legs and i dunno if i should just use oil to loose in up? any tips or advice..

[@o0_VanYsH_0o]

Hi Jesse!!! This Video is SUPER helpful!!! I'm attempting to do my First Repair on a Darkus Sirenoid, I'll give you the backstory. Im a huge Fan of Bakugan, especially first and second series, have been since I was a Kid. I just got back into Bakugan, and My newly purchased Darkus Sirenoid arrived not more than a few Hours ago, but I remember that compared to the ones I had as kids, this one had issues. The issues with my Sirenoid are as follows Slightly weak Magnet, enough that rolling onto a card becomes EXTREMELY difficult Full closed Bakugan will not stand on a card without assistance And, the Right side of the Shell will not close equally with the left, unless both sides are done at the same time in rapid succession. I have posted it on r/Bakugan, and am awaiting answers there, If you could maybe lend me a hand for Diagnosing problems, or a possible guide through this (Since this is my first time and I want to save as much money as possible. I'll buy another for parts IF I HAVE TO). Thank you so much, and Keep Calm, Brawl on!!!

[@JoystickJesse]

Hey! I would suggest to start by checking for any serious dust or dirt… I found your Reddit post as well! My guess is there is some kind of debris stuck in the part where the sides extend out. I may have a little time here in a few hours to make a KZbin short if that would be helpful! I think going forward making shorts for repairs is the best way to go as so many people have niche problems with their Bakugan!

[@o0_VanYsH_0o]

@@JoystickJesse A short for a Repair? I would LOVE that, thank you so much!!! That would be a MONUMENTAL help, I cannot thank you enough!!

[@JoystickJesse]

@@o0_VanYsH_0o No problem! It shouldn’t take me very long to make, but I won’t be home for an hour or so! I’ll send you the link to the short once it’s done so just give me a little time!

[@JoystickJesse]

@@o0_VanYsH_0o Hope this helps some!!! kzbin.infoPoObqscdcPA?feature=share

[@ferdianfh]

Hey guys! I need an update, did you fix your sirenoid? Because mine has the same problem, the magnet need pressure to pop out and i can't be closed unless i put it on the magnet card..

[@Fall871]

How do I fix my thryno horns colour it keeps coming of

[@IrishBrotato]

My dual hydranoid has a stiff head that keeps the head from opening on the magnet...how do I make it not stiff

[@thatwhitekid1321]

I think u forgot about the b1 open core magnetic problem if u dropped them accidentally on the ground there was a chance the magnetic would go sideways and it'd be come harder to open them up

[@cqb_7075]

Help me fix my hades the right head spring isn’t working

[@norberton.retanaljr.1976]

My bakugan spring is weak and it cannot transform 😢 how can i fix them?

[@ubesep]

Hello! Thank you for this helpful video! I have a problem with a joint pin on my green Torex. It is a smooth pin without any relief. It started moving freely and as a result, one side is falling off constantly. What can I do so the pin would keep in its place in plastic and stop moving so freely?

[@JoystickJesse]

I would suggest maybe glueing it into place? Seems like the plastic surrounding the smooth pin has expanded, allowing the pin to move freely!

[@ubesep]

@@JoystickJesse Thanks! Will try that out.

[@EL-bm9tv]

My question is what about ultra Bakugan because it seems that they have bigger magnets doesn’t that make it harder to find a replacement

[@JoystickJesse]

The easiest solution would be to buy junk Bakugan and replace parts, or swap a magnet out from another ultra.

[@GoudaGuy69]

Hey Jesse love your vids you awesome I'm fixing my cousins Bakugan and I'm probably going to get some paint of so I wanted to ask what type of paint do you use for Bakugan so that it doesn't come off thx for everything. It's kinda argent cause he gonna get it next week thx agian

[@GoudaGuy69]

He's dad tried glueing it with super glue so Im using nail polish remover to get the glue out of the hinges and glue back the wing thx

[@JoystickJesse]

I typically use acrylic paint pens, flat spray paint, and the occasional tamiya modeling paint!

[@GoudaGuy69]

@@JoystickJesse thx appreciate I'm still busy it night buy me Imma go get tomorrow thx agian

[@banan1as]

Hello. I am new to this type of content and i have a question. Is there any way to remove thunder wilda's head? I am trying to make a custom vladitor so i need to remove that piece from wilda. If you could do a video about that i would highly appreciate it. Also keep up the good work man you earned a new subscriber

[@JoystickJesse]

Hey! Not sure if it can be fully removed. You should be able to unscrew the top and bottom, and there may be a screw underneath the head that also unscrews to completely remove the head! Glad you’re enjoying the content!

[@banan1as]

@@JoystickJesse also maybe do you know how i could remove percival's head to make a custom leonidas?

[@johnrayablaza9865]

How do i fix my bakugan, joints didnt open well.

[@JoystickJesse]

Check for rust, dirt/dust!!

[@xavierhuerta4798]

Does any one have any suggestions to tighten a Bakugan. I’ve noticed that my Helios has some gaps between the parts when it’s in ball form. Is this normal or is there a way to fix this?

[@JoystickJesse]

Most likely a screw needs to be retightend on a side of the body, nomrally found under where the feet fold in. If that doesnt work the plastic could possibly be stripped where the screw was placed making it loose.

[@newvestroia3708]

Me thinking about the deka helios magnussy in the discord.

[@JoystickJesse]

This comment is too early...

[@drybonesmunchakoopas5143]

I can't do the first step because Wavern is dating Drago XD

[@mrbeastfan8079]

Nice one... but isn't Wavern dead?

[@drybonesmunchakoopas5143]

@@mrbeastfan8079 Shes kinda like a astral cosmic ghost thingy thats connected to Drago now as seen in the las episode of the original series and mechtanium surge. "And wavern, We'll be together for an eternity"- Drago