Balancing Feiyu SCORP-C 3-Axis Handheld Gimbal Camera Stabilizer

[@aaronphillips2246]

Thank you! This is SO much better than the FeiyuTech balancing video!

[@CentralFloridaBigfoot]

Agree. Best one out there that I've seen too.

[@promotv3344]

Easy to understand 👍

[@darlbanc8651]

I am finding it difficult balancing my canon 6d with 85mm 1.8 lens on it. Dunno what I’m doing wrong so I was thinking of sending it back

[@carlosserra9528]

The problem is with the lens 85mm! To heavy, to long!

[@carteniogonzalez5567]

​@@carlosserra9528 Entonces para que ponen que aguanta 2.5kg XD

[@EntdeckerFuchs]

Good video, better than the original balancing video. But i made the experience, that the lens holder should be used every time. There is a light vibration in the motor, when it's missing.

[@Team.Louish]

Oh, good to know. Thanks. I normally don't use one and I do sometimes experience jitter. Thanks for the tip!

[@CentralFloridaBigfoot]

Excellent! Thank you!

[@chuchuongchuphinh]

Thank you! this video so much 👍

[@Telodijomao]

Hola. Super video. Me ayudó mucho. Gracias🎉. Tengo un problema con mi estabilizador scorp c el cual uso con mi sony a7c. Todo va genial solo que el gimbal consume toda su carga en menos de hora y media cuando en las especificaciones dice qie dura 8. Ya lo he dejado descargar completamente y lo he cargado con varios cables y no se que hacer para solucionarlo. Me ayudas?

[@Team.Louish]

Have you tried buying different batteries from a different company?

[@MondobasaStories-jk8zy]

CLEAR VIDEO

[@reinerfernandezurra1247]

Hello, I bought a Scorp C that in the specifications said it was compatible with the Nikon D7500 camera but when I try to connect the camera's Live View it doesn't work and it doesn't let me control the camera from the Gimbal. Anybody knows something about it?

[@Team.Louish]

@@reinerfernandezurra1247 Personally I prefer not hooking up my camera controls to the gimbal cause it locks you out of using the functions on the camera while connected. I use all my gimbals as just gimbals and I don’t use the buttons that change settings. I just set my camera to what I need and use the gimbal for stabilization. I hope you’re able to figure out your connection though if you absolutely need it.

[@reinerfernandezurra1247]

@Team.Louish Thank you for the answer, yes, is just to know cause I don't need the connection actually.

[@shutterframephotography]

Can you tell me what cable goes for Canon 5D Mark IV for controlling the shutter ??

[@Team.Louish]

You would need USB-C to USB 3.0 Micro-B, OR USB-C to Micro. This gimbal comes with a USB C to micro. The Micro cable can still fit into the 5D Mark IV, it just plugs into 1/2 of the port on the camera side. It would be plugged into the camera usb c port on the gimbal, then you would be able to start and stop the camera from the controls on the gimbal. Something like this: amzn.to/3XWdr6y

[@carrionphotographyfilms]

Can you tell me what cable goes for lumix s5ii for controlling the shutter

[@Team.Louish]

As far as I'm aware, the S5ii uses the 3.5mm, so you'd use the USB-C to 3.5mm

[@carrionphotographyfilms]

@@Team.Louish thank you

[@CMProductions-ox5ou]

I’ve been having issues balancing the Panasonic s5 with the sigma 24-70 lens. Do you know if it is within the requirements ?

[@Team.Louish]

Your camera and lens is about 3.4 lbs and this gimbal recommends 5.5 lbs or less, so yes it should work fine.

[@TheStakesAreHigh]

I have a Tamron 28-75mm + Sony a7 III. Can this gimbal handle the weight ?

[@Team.Louish]

@@TheStakesAreHigh A7S3=24.66 oz / 1.54lbs Tamron 28-75mm=19.4 oz / 1.21lbs Total= 44.06 / 2.75lbs This gimbal supports up to 5.5lbs so yes your combo works.

[@prasadtalluri163]

Thanks you..sir

[@joseluisperalvo6267]

sometimes i fell a little vibration coming from the gymbal, do you know if this is normal or is it because my camera is to heavy? thank you in advance

[@Team.Louish]

I have that issue with some gimbals too, another user on here said to make sure and use a lens support / lens holder and that fixed micro jitters.

[@HendriElsa_ElsaMusic]

Keren👍

[@naeemalexander6274]

can you rig a phone on this gimbal ?

[@nanidhana6105]

can i use 35 mm sigma dg art lens with alpha 9 mark with this gimble?

[@Team.Louish]

Yes it should work just fine, it’s well within the weight limit.

[@charliemartinez4944]

Maybe I'm just not meant to use this thing. I've tried for the last 2hrs and it still goes outta whack when turned on.

[@abstractwars]

Auto tune using app and then my manually turn up the til motor strength

[@abstractwars]

It’s not switching on or charging

[@Team.Louish]

Are you charging the batteries using a wall charger? I would try getting another set of batteries with a separate charger.

[@abstractwars]

@ the battery is inbuilt

[@Team.Louish]

@ sorry I was thinking of a different gimbal. I just plugged mine into the wall using the USB-C port and I have green lights flashing on the handle showing the battery level while charging. Does yours have any lights that appear when you plug it in?

[@abstractwars]

@ no, they way it used to charge normally, it is not charging or turning on even after holding the button for more than 20 seconds

[@Team.Louish]

@@abstractwars Dang, not sure. I would try another USB C plug or contact the company directly. Sorry man.

[@mroblige1018]

If you don't have 5-6mins out of your day for this.... You're useless😂😂😂

[@hegarrakatv]

Pembelian ini ada kopernya?

[@Team.Louish]

No

[@Novalex1016]

Bro, talk.