The gimbal can be purchased for the limited price of $199 through this link: feiyu-scorp-mini-4-in-1-gimbal.kckb.st/db8ab97e
@Sehyo2 жыл бұрын
The campaign is fraudulent.
@maxescano Жыл бұрын
Hi, can yours do a vortex shot? Mine wont spin when trying to do a vortex shot holding it torch wise. My set up is Sony a6400 + Sigma 16mm f1.4.
@tonycaine59302 жыл бұрын
Excellent tutorial. Better than the manufacturer's own tutorial.
@kevin.de.almeida9 ай бұрын
thank you so much for this tutorial, i have a shoot tomorrow and i just got this gimball, your instruction were very clear ! ,since the shooting is for social media the vertical mode is a game changer for me ! hope it does well on the field ! take care
@joaovermelho00842 жыл бұрын
Glad you're back.
@peicyrc12412 жыл бұрын
It was such a great travel companion, and I took it for my whole vacation. The multi-function knob helps a lot when I shoot outdoors, love it!!!
@michaelrobinson56962 жыл бұрын
Bro this was super helpful! I have a scorp-c and I have been struggling. But the concepts are the same. This was great. If you can, I would love a video on the Scorp-c. 🙏🏿
@arysalfitra2 жыл бұрын
Just wanna say thanks, i just bought this Scorp mini and the seller doesn't know how to set up this gimbal properly Gladly i found this video
@EvanThomas2 жыл бұрын
glad it helped!
@jimsnow6430 Жыл бұрын
Best balance tutorial that I have seen!
@summerw86212 жыл бұрын
Seems so easy and quick to balance and set. Thanks for sharing and will pick one to start my first shooting experience.
@bryanenglish78418 ай бұрын
Awesome! Just bought this and you really helped me get it set up properly. Thanks for the great video!
@MavicAir2TW2 жыл бұрын
I just got my Scope Mini. Your Scope Mini tutorial video is very helpful. Thanks for sharing! Subscribed and like 👍
@viktor.martinez Жыл бұрын
Thanks to you my good man I balanced my fist ever gimbal very quickly . THANK YOU!
@124quest Жыл бұрын
this is my first gimbal and this video was brillant at showing how to balance.
@JoseNavarro-FG2810 Жыл бұрын
Good gimbal?
@Dominick-k6w3 ай бұрын
Great video, can you connect the new iPhone 16 via usb-c and control it through the gimbal?
@peterhewitson714 ай бұрын
Great video easy to understand , thanks very much
@mark_barrentine Жыл бұрын
I would like to make one suggestion when balancing, configure the camera EXACTLY like when you will be recording as just a gram of weight shift can affect the gimbal balance/stability. This means no lens cap, the controller cable from the gimbal to the camera is attached and and the articulating screen on most mirrorless camera is in the position you will be using it in. I did notice I have been balancing the first two axis in reverse order from yours. I'll have to try this order to see if I get faster and better results.
@markrobinson8254 Жыл бұрын
very excellent showing of the balancing
@gozec62509 ай бұрын
@EvanThomas can you please show us how the focus attachments fits on this gimbal
@gozec62509 ай бұрын
Best video for the setup of scorpio
@ComeLetUsReason101 Жыл бұрын
Thank you so much for your tutorial... it helped me a lot
@nonstopjazzlin2 жыл бұрын
Very helpful for a total amateur like me. Thanks a lot!
@lifeofmackievlogs32912 жыл бұрын
Thank you for this amazing and easybto understand tutorial video sir.
@PatrickMatthews-f6d11 ай бұрын
God bless you!!! I've had a time with this thing!
@JasonSirimanne2 жыл бұрын
Can this gimbal do object tracking. Eg. A dancer ( face not visible all times ) moving.
@maryhenderson4929 Жыл бұрын
Would love this feature
@renlucaworld2 жыл бұрын
Geez thanks so much I have the c but your the only one explain this
@joyce67372 жыл бұрын
Thanks for shasring. It's good to use.learn more in your video. Functionality is very full after exercise can relieve muscle soreness. Thanks again.
@klhonestguide69372 жыл бұрын
Hello, my first Time using this feiyutech score mini, Im using a smartphone and after balancing and fine tuning, it appears the tilt motors bar is not full. the other two motors are fine. what does that mean?
@enoshyounus770710 ай бұрын
None can teach gimbal balancing like you
@JenlovesTech Жыл бұрын
Thank you soooo much ❤
@francisenaje Жыл бұрын
Can it handle old dslr like Nikon D5300 and it's kit lens?
@idrizbinaku583811 ай бұрын
Great explanation thx
@filsector Жыл бұрын
I tried to follow your steps, it didn't work with my Canon r7 with an 18-150mm lens. Few things I didn´t understant, last position of the gimbal. I did just like you but it came out completely different maybe it's because I have a heavier and longer lens that yours.
@Danielcooney952 жыл бұрын
Thank you brotha!
@OndaBela2 жыл бұрын
thank you 🙏🏽
@niki68522 жыл бұрын
Nice review! Is it possible to use the digital zoom on Scorp mini?What can I do?Analogical Feiyu has the zoom controller
@dennyfree12 жыл бұрын
Can you use a Falcam F38 quick release plate on the camera mount? Will it balance with a Tamron 20-40mm Lens?
@EvanThomas2 жыл бұрын
Hi Dennis, I can not give you an honest answer, I have not tested it with that camera :/
@ShimaMohanadas Жыл бұрын
Hi Dennis, I have the same question. Did you figure this one out?
@Unpopularopinion20242 ай бұрын
Can you demonstrate how to balance a smartphone
@at4overlandadventures7112 жыл бұрын
Hi Even!! I have a OM Systems OM-5. I've been shopping for a gimbal. Can you suggest a gimbal that would be compatible with the OM-5??
@clmstudiocenter1862 Жыл бұрын
This gimbal is comptible with 5D mark ii ?
@angelynarellano-gardose9652 жыл бұрын
Hi! What happens if i buy this but its not compatible? :( I have a G7x Mark II and it says on the compatibility that it is cmpatible with G7x Mark III. I saw videos with canon g7x cameras and this scorp mini but forgot that the mark III looks the same with the mark II. Didn't know it wasnt compatible with the mark II. HELP! 😭
@powerbornfreedom-nx4et2 ай бұрын
how do i get the usb mode off of camera screen?
@MusphyOfficial Жыл бұрын
is this good for dslr?
@NANG10LIAN Жыл бұрын
Mini vs C what different??
@DjLongzkiePh9 ай бұрын
Thanks bro
@andrewsi192 жыл бұрын
i just bought mu scrop. but when i turned on, the motors doen't work. all motor unlocked dan fully charged. can you help me?
@jemukun2 жыл бұрын
me too like this
@Calico3D2 жыл бұрын
Does anyone know if this gimbal has actually shipped to Kickstarter backers? Seems to be a lot of confusion.
@andreas.bachmann2 жыл бұрын
FeiyuTech claims since many weeks, that they shipped the gimbals. But it seems that nobody of the many hundreds of backers actually received it. They are struggling to provide tracking numbers, don't answer most questions. In short, it's a total mess. Because they used sea freight for shipping, there is still hope that they arrive eventually, but shipping maybe takes several months. At few online stores the product popped already up for sale, you probably get it faster from there. The "super early backers" maybe get it last.
@alekrumenov26452 жыл бұрын
@@andreas.bachmann thats crazy, if i buy it today, will be at my home after 3 days :D
@tonycaine59302 жыл бұрын
@@andreas.bachmann Just received mine today after 4 months of waiting.
@GilbertTV Жыл бұрын
good vid
@texas85052 жыл бұрын
How I can fix motors' noise?
@AbishekAbishek-bl9hi2 ай бұрын
❤❤❤❤❤❤❤❤❤
@Dragonkill-music Жыл бұрын
you have to remove the cap to balance the camera.
@4Ghostt7 ай бұрын
My lens to heavy 😢 sigma 18-35 🥹
@mrki731 Жыл бұрын
Talk about fucking complicated to balance. I'm sending mine back.
@realjack88 Жыл бұрын
I ordered the product after watching your review back in September and never got the product. I have contacted the company many times and all I got was a fictitious tracking web site. This looks like a fraud to me and I would like the presenter and KZbin to remove this harmful advertisement so other people would not fall into this.
@crickcrackcricketycrack55017 ай бұрын
I ordered one from Amazon and it came next day. Fair enough it was obviously a dodgy website you got it from but the product is real and this review is legit so why would they remove it?
@muhammadbagieralaydrus6915 Жыл бұрын
Can someone please help me, im so lost. I balanced it all the way until the last axis, but i bottled it there. Now I tried to reset the whole thing but it feels like impossible now to keep it facing updwards toward the ceiling, which was easier before. Is there any deafult settings or specific start measurement so i can start again?