I hope to change the way we work with stairs and railings, in version 2026
@NicK.G.Tsagkos5 ай бұрын
That's true, stairs need a lot of improvement from Autodesk.
@williamalbert35435 ай бұрын
i hope so too, such a pain
@user-wv9vj3wx3o5 ай бұрын
everyone just bear with me... i want to comment on two things: 1- we need skirting command : In many regions of the world, skirting are used in almost all buildings. Currently there are two ways to do skirting. Either by using wall swepe or model in place swepe and both need a lot of work ... goddamet, revit can find out the boundaries of the room using room Command and it know were the door opening, how difficult it is to integrate these two pieces of information and work from it a new command for skirting!!!! 2- array command in revit it's sucks : If you compare revit array command with other programs such as 3D Max and AutoCAD array command, you will understand what I mean. We need it to work on complex... and organic paths... and on more than one path at the same time. This is what we need...
@varanthadjian5 ай бұрын
I usually use the railing tool to create skirtings. That way I can also create schedules and know the exact length of skirting needed for the project.
@AussieBIMGuru5 ай бұрын
Railing tool is indeed the way.
@Dbobber4 ай бұрын
If they fixed all the issues then they wouldnt sell the other softwares anymore ;) its about the money
@austingarst5 ай бұрын
Annotation alignment was an add-on I loved. Glad to see them add this as a native Revit tool.
@NicK.G.Tsagkos5 ай бұрын
Me too ! I'm happy Autodesk is adopting ideas from pluggins-addons that are very useful for drafting and modelling.
@nelsonperez12525 ай бұрын
Toposolid smooth shading. I was waiting for this for a while, I can finally soften the topography and make it not look so robust. Thank you for sharing the new and improved features of Revit 2025.
@nicodm62735 ай бұрын
The only feature I want from Revit is to could save a file to an older version. But I tkink it will be still a dream.
@tashi37375 ай бұрын
Totally Agreed!
@AussieBIMGuru5 ай бұрын
Its a dream. Autodesk themselves said it will never happen.
@CringeEternal4 ай бұрын
Why? What for?
@AussieBIMGuru4 ай бұрын
@@CringeEternal most likely so they can open models in old/cracked builds in a lot of cases. Nearly all firms have version management policies these days.
@user-xu3fw6oj4f4 ай бұрын
just upgrade to higher version
@amgaaac84805 ай бұрын
Still not updating main issues that have been here for years. Fix stair problems, fix wall's recognizing curtain wall as WALL- need to have turn off option for curtain wall wraps. Parts are still too medieval always having errors, soil cubic meter options are not advanced enough, mass need to become more advanced and stop getting basic geometric errors, need to improve wall sweeps also.
@amgaaac84805 ай бұрын
and perspective function of Revit is BIGGEST weakness of all, hope they fix it
@henryglennon38645 ай бұрын
I mean the underlying philosophy of everything object hosting (allegedly) and being parametrically associated (allegedly) with other objects still makes it impossible to fluidly model in Revit in 3d, which is thd biggest time waste and problem with the program as a whole, and that can not be fixed.
@deskreanimation4 ай бұрын
hmmm 🤔 i am using revit 2016
@markallen34805 ай бұрын
What about the fill of the toposolid? That was the biggest issue when pads were removed: with pads you could have it half cutting and half filling the terrain on a sloped topography, with one geometry (a pad) quickly and easily. Now it seems that you have to cut one part of the terrain and then build a fill geometry. Twice the work...
@balkanarchitect5 ай бұрын
Yeah, this only completes 1/2 of the job, but with 3D snaping, this should be made a bit easier.
@edwardmackinnon26854 ай бұрын
Completely agree with this comment above - to completely overhaul the site tools but leave out half the functionality of the previous version (pads and snapping points) has been a trainwreck for our firm - we do a lot of topo / site levels and since upgrading to 2024 been nothing but a struggle. Hopefully this excavate tool and 3D snapping to model elements (linked building files into site files???) goes some way to restoring that functionality.
@kasonmalcolm30885 ай бұрын
I'm always eager to watch your tutorial videos they have always helped me with my projects in school and I believe I'm on my way to becoming more verse in Revit everyday. Thank you for you content. 👍
@musefan123455 ай бұрын
Great to see that they’re fixing the mess they made of topography in 2024. Do you know if you can snap to point clouds when editing toposolid points? This is a feature that has been needed since day one.
@balkanarchitect5 ай бұрын
I'm not sure, but I will will be testing that!
@musefan123455 ай бұрын
@@balkanarchitect Awesome, thanks.
@musefan123455 ай бұрын
@@balkanarchitect just tried it out today. Looks like it CAN be done. Selecting the XYZ option when adding points makes this possible. This is an absolute game changer for me, as I work with point clouds all the time.
@gkptech4 ай бұрын
Amazing! Thanks for compiling all of this for us! PDF exporter in the background might be underrated. I think this is an amazing feature and on my priority list for testing
@RobinErik4 ай бұрын
Revit update 2025. We moved the option bar, congratulation on another fine year of updates. Well done team.
@Lha_Luke5 ай бұрын
Toposolid improvements look promising, would love if you did an in depth video on it to see if it is usable now. Also wondering what the workflow will be when linking building models into site models as far as cutting the toposolid...
@balkanarchitect5 ай бұрын
There will be a new toposolid video soon!
@defrag15 ай бұрын
All these new features are nice but what I really really want is backwards compatibility. Not to the first edition but at least till 2017 edition. Imagin opening a 2024 Revit file on your 2019 version. That would be a huge relief.
@nadeem0065 ай бұрын
Yes absolutely agree with your opinion on this issue .... If they did this then this would be a huge relief, Higher versions always required Higher Higher hardware systems configuration and most of the time you cannot carry our laptops or PCs with Higher configuration to anywhere..... We cannot always upgrade to new versions because of office standards set .....
@MilosCsrb5 ай бұрын
There's not a single reason to use old Revits
@AussieBIMGuru5 ай бұрын
Autodesk has told us it will not happen in Revit.
@hagenrushing97485 ай бұрын
I see that there will be a new toposolid video coming soon, I really want to know the best workflow for making sunken roads and curbs. So far, railings have worked well in 2024 but are not good in 2023. We really want a negative subdivide for toposolid. This may have been addressed with the new excavate tool, but I haven't tried there has to be a way to offset an excavation from the existing grade orther than splitting it. I was also wondering if subdivide works for linked topography now. We have been using revit 2023 so that we can link the civil 3d topography and use subregion. Thx.
@pieterschiettecatte5 ай бұрын
Thank you for this detailed video. For what it's worth, at second 12:24 (regarding the Toposolid smooth shading): this will not slow down your computer or the view. The real trade of is that the surface patterns will not work on smooth shaded toposolids. Although that's a price I am willing to pay because the toposolids will look much - much - better in renderings with smooth shading on.
@balkanarchitect5 ай бұрын
Thanks for the info!
@hudsonb6315 ай бұрын
minor update. frustrating to be charged more and more each year for this. waiting for AI implementation even at a very low level to start. Not holding my breath
@zaneraza40445 ай бұрын
I never understood why they removed building pads in the first place!
@ryansuess42895 ай бұрын
So many of these features are great, but until we can get consistent font generation, PDF export will never be used in our office. It changes the font width during export causing it to ignore cell padding and even go outside the cell boundary in schedules. It looks right in Revit and when we print with Bluebeam. This has been an issue since the feature was introduced in 2019. (Using the OOB default, Arial with a width factor of 1.0 if you're wondering.)
@Dark0Storm4 ай бұрын
My array workaround was previously to have a single copy of the arrayed item and have this single item and the array items use visibility parameters that were controlled by the number of items, so if the number of items user parameter was set to 1, it would set the count to 2, but hide the array and show just the single item instead. If it was zero it would hid both the array and the single item. This is obv much better
@paymansalehishafa68844 ай бұрын
These are actually really good updates. specially the sheet collection
@chilombe5 ай бұрын
Great video: that auto-join and lock is going to be a life saver!
@wrighthausracing96415 ай бұрын
Thank you for always having great videos
@Dbobber4 ай бұрын
hopefully they fix dimensions not overlapping each other if they fixed detail notes being aligned nicely
@ArchLife025 ай бұрын
Nice impressive update 😊
@ottigreenisgo4 ай бұрын
Such a pain that you cannot excavate with walls. or slab edges etc. There are work arounds and still quicker than the old way just wish they would make that work and my documentation of sections would be that much faster
@ashutron5 ай бұрын
Great video, truly a lot of well coordinated information
@deskreanimation4 ай бұрын
nice info hope newest revit more inovative
@ElectricRob5 ай бұрын
Looks like you Architects got a few more upgrades than we Electrical folks got - however I want to create some custom families with arrays now that is actually works!
@Dbobber4 ай бұрын
Hope they fixed the PDF button not being linked with cloud build account. I let them know of this issue and they said "were working on it" it makes the button useless. Using the print button still to create pdfs lol
@imtiaz915 ай бұрын
Still no batt insulation 😢
@VitorMSAntunes5 ай бұрын
Thanks for your excellent work!
@bolaoresanwo64115 ай бұрын
Thanks Balkan. I am a fan. Any new features that enhance structural engineering
@chandrasajana22995 ай бұрын
The update for rebar splicing is cool
@ar4m1r635 ай бұрын
Annotation alignment - ALILOYAH, hate to do this with hands
@danielmanuel26535 ай бұрын
Amazing video sir ❤ Hope revit 2026 allows fllexible and movable baluster railings
@matthewloynd93645 ай бұрын
Wait, what do you mean you can have sheets with the same number??? Does that only apply if the sheets are in different collections?
@balkanarchitect5 ай бұрын
If you have sheets in different collections, they can have the same number
@marktristanviguri7308Ай бұрын
Thanks you are the best, office loves your tutorials amigo
@otaviogomes94805 ай бұрын
Do you know if the problems with the topographic solid volume schedules have been resolved as well?
@balkanarchitect5 ай бұрын
I'm not 100%, I will check!
@otaviogomes94805 ай бұрын
@@balkanarchitect in autodesk forum has this issue: "Users reported that cutting a void geometry from a particular toposolid model, the cut/fill volume does not get recognized in the Toposolid Schedule in Revit 2024.", so autodesk said in december (last year) "This incident is being investigated for a possible cause and resolution." Maybe this problem has been solved in Revit 2025, i hope so!
@otaviogomes94805 ай бұрын
Also thanks for reply and for sharing knowledge!
@thompho_neluheni5 ай бұрын
Autodesk need to include parametric models in their product. i really love it hence since they are not including i will forever dwell in revit 2018, the best of them all. i mean let them include roof framing feature, decking tool , windowa, (their windows yooh) like window openings hauwa Autodesk
@ahmedhaitham580619 күн бұрын
Why can't make changes on the crop view in this version?
@franzanferneefelipegeneros22925 ай бұрын
happy 600k subscribers!!
@balkanarchitect5 ай бұрын
Thank you!
@Aws-19825 ай бұрын
I hope they will work on develop path array , I've been waiting for it , hope in version 2026 that will do
@camaleon95 ай бұрын
I truly believe developers must include a native solution for scheduling doors by opening direction, without relying on workarounds or third-party plugins.
@lennart92954 ай бұрын
is it possible to connect Revit 2025 to Twinmotion? if yes, which twinmotion version is right?
@mickeybowmeister19445 ай бұрын
Please AutoDesk, bring back building pads!
@balkanarchitect5 ай бұрын
They did, in a way! :)
@ottigreenisgo5 ай бұрын
@@balkanarchitect Will it auto cut out with floor as well as beams and pads? That would speed up my documentation a lot
@datodeavitadze27175 ай бұрын
I think the best feature will be Walkthrough like in archicad
@icerew5 ай бұрын
MEP left by the wayside again in this update
@MilosCsrb5 ай бұрын
They trying to force non native fabrication elements, wtf stop it already
@NicK.G.Tsagkos5 ай бұрын
Great, Autodesk is improving things, something else i would love to have in Revit as a built in function, is a more sophisticated filter, to filter not only categories, but also types and instances.
@ibstah924 ай бұрын
This is already a possibility within Revit's filtering system. You can use parameters (both instance and type) to then filter the information you see within a schedule or elements within a view. Let me know if you need anymore help.
@NicK.G.Tsagkos4 ай бұрын
@@ibstah92 i'm not talking about filters, but about filter, like filtering elements, with the button in the bottom right corner of Revit, an easy and fast way of filtering elements not for visual reasons but for selecting the ones you want to find in a model, i used to have an addon that used to do that, filter and sort selected elements as categories, types and instances, normal filter is only filtering categories, not instances and types.
@ibstah924 ай бұрын
@@NicK.G.Tsagkos Ahh I see, there are many plugins that do that but it would be nice to have that as a native feature! The closest Revit comes to natively doing that is to create a schedule and then filter that down to whichever elements you’d like to select. Then highlight the cells in the schedule and switch to a model view. This will select all the elements in the model which were listed in the schedule.
@NicK.G.Tsagkos4 ай бұрын
@@ibstah92 yes, schedules is a good way to select elements, but it would be nice if they can adopt this addon, they have done it for align tags, it used to be an addon and then Autodesk adopted the idea...
@raveenwijayakoon30524 ай бұрын
Will you be making an updated version of your personal architecture template to use with Revit 25?
@balkanarchitect4 ай бұрын
Hi, the template works with Revit 2025! :)
@bekaakk5 ай бұрын
Thanks bud 🙏
@tomshaji5 ай бұрын
Make a video about how to update from 2024 version to 2025
@muhammadfarhatnaja98675 ай бұрын
Amazingg updatee ❤ thankss for sharing this information
@wrighthausracing96415 ай бұрын
Awesome I can place railings in a hole 😅
@balkanarchitect5 ай бұрын
😅
@simsInnovation4 ай бұрын
I have a question about joining/locking walls. Does Revit adjust windows and doors when the wall gets thicker? Or do they still just recognize one of the walls as a host?
@tomshaji5 ай бұрын
You never did a video about paint tool or how to paint and it's tricks in revit
@dannyoconnell22775 ай бұрын
All very nice but when will we be able to schedule coordinates.
@nathanscott99202 ай бұрын
Can you copy a sheet collection? Will the sheets within the collection also be copied with it?
@mirakbar90293 ай бұрын
Hi Balkan Architect - why the plants in Revit 2025 shows as a box? how to solve it?
@stellular1114 күн бұрын
I cannot get 3D PDF to load into Revit 2025. Anyone else have this issue and (hopefully) a solution
@jardila152 ай бұрын
Hi, which is the best way to time track the use of revit per project?
@fuadmohammed36505 ай бұрын
How about that God awful 3D navigation? For an architect who is coming from another BIM tool, it's so repulsive,
@danielmanuel26535 ай бұрын
Use BX Command
@abdulwali57994 ай бұрын
I've download Revit 25 but family library is missing and it's also not on Autodesk website where to download it's library
@Constantinesis5 ай бұрын
Hello! How about the toposolids subregions? In 2024 if you need to subdivide the toposolid you couldnt unify it back. Is that possible now?
@briankipchumba82025 ай бұрын
Hello Balkan architect, wanted to ask if you can offer a private Revit tutorial on architectural,MEP and rendering of a specific project. Kindly respond when you see this.
@manishvijay45485 ай бұрын
There is a major Problem i face evertime that is with Connector visibility. Is it possible that in the future we can see connector visibility option in Revit?
@Smilemonk54 ай бұрын
How to create levels in 2025 revit as i am not getting automatic written level 1 ..
@dylanholmes35025 ай бұрын
So going by this it looks like it doesnt work the same way if you require fill? (as the building pad did)
@ifurebasseyudoma43865 ай бұрын
Time to upgrade
@vietphamquoc98565 ай бұрын
I hope revit have link 3dsmax on revit.
@nohamostafa79274 ай бұрын
I need family libarary for revit 2025....how?
@jahanhunzaihunz63755 ай бұрын
How to install enscape in revit 2024
@EliasAEE5 ай бұрын
Every year they add few things and don't tidy up the basics, like modeling
@LOUAYNERO4 ай бұрын
revit 2025 family is messing 😭😭 and i can't download it because is pay please help me
@abdulwali57994 ай бұрын
Samee
@davidpeters88215 ай бұрын
They'll fix anything but the stairs isn't it😒
@matthewloynd93645 ай бұрын
On the Autodesk Website, they have a section that shows what they are currently working on or planning to work on for future updates and Stairs and Railings are currently getting revamped. What that entails I am not sure but they have been working on improving the functionality and flexibility of those elements.
@paopao27194 ай бұрын
Hi guys. I badly need help. I upgraded my project to revit 2025. Do you have any idea on what rendering software can I use?
@novazulfanur61735 ай бұрын
probelm revit make model under 5mm, next revit make line or model under 1 mm. thanks
@mgladwin5 ай бұрын
Just installed 2025 and copied my keyboard shortcuts across from 2023. In 2025, I can no longer toggle the halftoning of elements using a keyboard shortcut. Its not even in the keyboard shortcut list any more. Anyone else seeing the same?
@absolutegenerique5 ай бұрын
Gde si skinuo krekovanu verziju ?
@YVaio75 ай бұрын
Can you test how the topography looks in elevation drawing views? Are the profile lines of the topography visible? I still don't understand why nobody mentions this and why Autodesk doesn't care to fix it. Toposolids are floors in their core, which means profile lines are not there. However, in topography, they are SUPER important for technical elevation views!
@balkanarchitect5 ай бұрын
Hello, yes there will be an in-depth toposolid video soon!
@YVaio75 ай бұрын
@@balkanarchitect Awesome! You are the best! I am really curious to see if they fixed it, because I remember in 2024, the only lines I could see in elevation/3D were the contour lines or the section lines, but no projection/profile ones!
@Silvaarq24 ай бұрын
So, the best improvement they could do to the new toposolids which is being able to offset subregions to negative values, for example to make roads and sidewalks, they didn't do? What a disappointment
@andrespades39235 ай бұрын
why installation stops at 97%?
@Jem3nem5 ай бұрын
does the new pad system, when above the topo, create fill too?
@balkanarchitect5 ай бұрын
No only cut, but the fill should be easier with point 3D snaping
@Jem3nem5 ай бұрын
@@balkanarchitect damn. Really like the old pad which would bring up topo when elevated from the topo.
@josepedrosantiagosilva96255 ай бұрын
Any updates for Genric Model Adaptative families?
@balkanarchitect5 ай бұрын
Not that I know of, but I will look into it!
@josepedrosantiagosilva96255 ай бұрын
Just a thought for Autodesk: Adding a chamfer feature to adaptative generic models could really enhance usability. It would make shape creation easier and reduce the need for voids. From what I've seen in architectural offices, many users prefer this type of modeling. It might help keep them within the Autodesk ecosystem rather than switching to other software like Inventor or Rhino.@@balkanarchitect
@rmacapobre3 ай бұрын
Anybody has a tutorial to create a C# Revit Plugin for 2025 which uses .NET 8.0
@rocketman10585 ай бұрын
holly cow, the new complex mullions will add unnecessary geometry as hidden trick
@ruche230005 ай бұрын
2 decade old software, contour lines still looks like its been drawn by michael j fox
@AndyHudson5 ай бұрын
If you think thats an amazing new upgrade you need to get out more, this release is a patch at best, its fixing what they did badly last year, as a subscriber and MEP user I feel like I have been robbed for the past 2 years, we have had nothing new, and they haven't fixed the broken stuff either
@leszkensleszkens27855 ай бұрын
stupid total carbon analysis but no stair or railing tool!
@shanecoppinger70245 ай бұрын
took them this long to add sheet collections is laughable
@vladvalentinov4 ай бұрын
Revit, as a modeling tool for custom 3D objects (couch, chair, other entourage), is in a stone age. While it is possible to model intricate 3D objects in a free software, even web-based ones, like OnShape, Revit didn't change it's approach since V.1: extrusion, blend, revolve, sweep, sweep blend... that's all Revit got? - sad, borderline pathetic. Am I missing something?
@project58684 ай бұрын
Autodesk still amazes me how the focus on things we dont need. Instead basic fuctions need updates for years!! And the UI still sucks!!
@AbuAbdillah14135 ай бұрын
We will never truly be citizens there. Abandon UK and stop giving them our taxes every day of our lives