Bambu Lab A1 - 3D Printer - First Prints

Getting Started with the Bambu Lab A1 Combo 3D Printer. Power on and First Prints.
Full-auto Calibration
Multi-Color Printing
Active Flow Rate Compensation
1-Clip Quick Swap Nozzle
Active Motor Noise Cancelling
256*256*256 mm³ Build Volume
My main channel @Just Vlad
As an Amazon Associate I earn from qualifying purchases

[@LayerbyLayerOfficial]

0:18 Fun fact: it actually doesn't have a speaker. those are the motors vibrating and different frequencies to create those sounds

[@roysutton577]

I love the smell of stepper motors in the morning.

[@iam.miikey]

You should be aware there is a safety recall on this particular printer.

[@chlero_eyes]

I'm coming from a ender v2, and i was stuck on buying the P1P because I didn't want a bed slinger but the A1 looks real good.

[@bryansgames5821]

very nice and informative video thanks

[@gilbertpatrucco5196]

very nice!! I can't wait for May so I can get mine :)

[@expatinthailand9824]

New review for a recalled printer?

[@chartle1]

yea had the same thought

[@ivanvalkanov]

@@chartle1 Why?

[@chartle1]

@@ivanvalkanov like the OP I was wondering why a new review came out for a printer that that at the time this was posted was being recalled and not available to buy. Its only been about 3 weeks that you can buy it again and those effected by the recall are just getting their parts and/or replacement printers. The recall itself is having issues where in some areas there have been issues on whether or not the end user can replace the part due to it being mains powered. It appears Microcenter has pulled all their stock to cover the recalls.

[@ivanvalkanov]

@@chartle1 I literally just bought mine and assembled it, and I got the recall message. I wonder how did they manage to sell me a recalled printer.

[@MisterkeTube]

I'm looking forward to Bambulab adding this screen and the improvements in extruder tech (like the pressure/flow sensing and easier nozzle swaps) to a P1S-derivative. Using a corexy cube should also have less risk for bed wiring problems.

[@messiaspacheco2301]

Excelent!!!

[@PeterAgostiniJdcap26]

Say if you want to pause the print you can do that and turn off the machine . “You need power failure enabled “ ok machine is paused and turned off you still have print on bed Turn machine back on go through the step’s resume It all depends on bed adhesion it will either continue you ok or snap off the pei bed plate . I did this for one hour yesterday . I was able to to resume and finish print . Good review guy 😎👍🏻

[@The_Ray]

I thought this printer isnt even availble to purchase, correct? I cant find it on the Micro Center website?

[@yobtnirp]

That’s because it has been recalled do to the strain relief on the bed

[@PeterAgostiniJdcap26]

II is pause button [] red button is to 🛑 it will ask you …once you confirm stop 🛑 that’s it game over for print

[@Rimbranbt]

Does the spool holder come with the printer?

[@Guineapigprinting]

yes, with the combo and the normal one

[@chartle1]

Its not a bogger the community calls it poop. 💩

[@matthewschreiber6661]

Sadly mine arrived the day of the recall. I never opened the box. They were prompt on my shipping label and refund. I'm taking my money and going X1C.

[@rickyneeter69]

Would be funny if you changed the qr codes for a rick roll

[@astrolemonade349]

You're kind of late to the party, the A1 units have been recalled. This video does not do any good whatsoever, it's currently just a curiosity I guess.

[@robinparker99]

So sad that you delete comments that you don't like.

[@Untitleduser604]

Wouldn’t trust vlad to much, gets sensitive over constructive feedback and deletes comments.

[@gigifrana940]

Really bad company in communication about problems 👎 I have one sent to me broken from the box 😐 Z axis dead (drivers and motor). Since the beginning of January until now providing everything absolutely nothing resolved, just messages back and forward doing absolutely nothing 👎 I anyone thinks that they have a good costumer services please think again 🤔 If anyone has problems with drivers motors and want any small help that they can use I will be more than happy to help.

[@gigifrana940]

I can only give a thumbs up for your presentation and a thumbs down for the company.

[@ivoidwarrantiesuk]

This is the worst printer ever. Mine has gone back because of the recall. I’m suprised Vlad hasn’t mentioned this yet unlike the other 3d printing channels

[@yobtnirp]

How is it the worst printer ever?

[@flat_stickproductions209]

​@@yobtnirpit's not, it's actually pretty good but everyone has gone crazy over the safety recall that was a super conservative call by Bambu.

[@yobtnirp]

@@flat_stickproductions209I know I have it and it’s been great, obviously haven’t been using it recently but yea

[@pilbaraviper9687]

Hahaha go back to your ender 3

[@ivoidwarrantiesuk]

@@pilbaraviper9687 actually I have a prusa mk3s+ and prusa mini+.