Bambu Lab bed leveling + meter holder

Thanks for watching and happy printing
Download the designs from here 👇
BAMBU LAB C1X P1P ODOMETER HOLDER
cults3d.com/en...
Bambu Lab Bed Adjustment
makerworld.com...
Playlists:
Lidl • PARKSIDE® Aku příklepo...
AliExpress • Elektrické ořezávátko ...
Apple • iPad Pro 2020 Vs iPad ...
Zábava • Test, jestli budeš boh...
Synology • Synology první kroky p...
Cestování • Дельфинарий Зоопарк Ню...
Auto • I - Elektrický utahová...
Jak na to • PARKSIDE PDSP 1000 A1 ...
Kuchyňské spotřebiče • Kitchen appliances
#3dprinting #3dtisk #3dtisknazakazku

[@monsieur5370]

Excellent. J'ai du redessiner le support pour le modèle de comparateur que je dispose. Je crois que c'est pertinent, mieux vaut que mécaniquement cela soit réglé au plus juste et ensuite l'électronique affinera. Avant mon réglage, j'avais +0,13mm à l'avant gauche, +0,25mm à l'avant droit et +0,05mm à l'arrière. Maintenant j'ai 0 aux trois points. Chose importante, il est nécessaire de refaire après, une calibration de la machine.

[@GuidoKoch-xt4tm]

der messuhr halter muss grösser dann ist es ne super idee habe nun mein drucker auch gut gelevellingt 👍

[@marutiroma6295]

Great idea! but it doesn't works without your meter holder. Can you sy us where does it buy ? Thanks.

[@tomauacz]

@@marutiroma6295 Just found this amazing item on AliExpress. Check it out! CZK194.78 6％ Off | Dial Indicator Micrometer a.aliexpress.com/_EIRAdtz Just found this amazing item on AliExpress. Check it out! CZK93.35 41％ Off | JAVIER 12.7mm/25.4mm a.aliexpress.com/_ExiyNnZ

[@Cypher007vUK]

also after doing the levelling ive got one knob with some thread showing another about right and last one little recessed, but front from factory they were quite loose.

[@TylrVncnt]

Nice job! They say they’re pre-leveled at the factory but 🤔

[@tomauacz]

Hi, they say😉😉

[@Cypher007vUK]

gret vid just had to modify the gauge arm as i bought one that had a fixing on the back. but anyway just wondered if i should level with the build plate out or in?

[@tomauacz]

You have to do it with the build plate

[@halibytification]

It was a great idea for my Prusa, I had one gauge meter in my drawer. However, isn't bambu supposed to auto levelling?

[@tomauacz]

Yes, Babmulab levels the pad via software.But the flatter the pad, the better. You definitely don’t have to do.