🦌 Bandsaw 3D Reindeer, DIY Tutorial

#Sawing instead of #carving - that can be so easy,
I sawed this #3D_reindeer on my band saw. Technical details of such a band saw see: www.dictum.com/en/power-tools...
The #bandsaw_template is also suitable as a #scroll_saw_template in a smaller scale.
Please note:
The following picture sequences of the video (from min. 3:50) are no sawing instructions and unsuitable for beginners.
On the other hand, professionals would surely complete the work on the reindeer with a carving knife.
So: The following scenes (from min. 3:50) are not sawing instructions and it is recommended not to imitate the following working techniques.
This video should only show my creativity.
The safety instructions and operating instructions of the machine manufacturers must be observed.
All band saws carry a high risk of accidents if a work piece is guided carelessly.
The working technique and the movement sequences must harmonize with the band saw.
Band saws with larger bandsaw blades increase the risk of injury.
Counterfeiting is at your own risk.
Experience has shown that the best way to saw is if the workpiece rests correctly and is guided safely.
Liability of any kind, in particular personal injury and damage to property, is excluded.
Now I wish you enough curiosity to watch - until the end of this video.

[@bernhardtammen4463]

Super Video Dankeschön es macht immer wieder Freude dir zuzuschauen

[@FEINESausWUPPERTAL]

Vielen Dank Bernhard! "Weitersagen" nicht vergessen 😊 LG Arnold - aus Wuppertal

[@bernhardtammen4463]

@@FEINESausWUPPERTAL mach ich

[@FEINESausWUPPERTAL]

Dankeschön!

[@martinwolf5957]

Kann mich dem vorherigen Kommentar nur anschließen! 👍🏻 👍🏻 👍🏻 Wieder mal einsame klasse. Gruß Martin.

[@FEINESausWUPPERTAL]

Bitte "Weitersagen"(empfehlen) - den Aufrufen zuliebe :) LG Arnold

[@fredmeyer3063]

Is that a 1/8" blade you are using; also, the blade guide looks like a Carter thin blade stabilizer. Is that what it is?

[@FEINESausWUPPERTAL]

I use this saw blade www.dictum.com/en/power-tools-sawing/pegas-fine-cutting-saw-blade-no-9-2375-x-1-34-mm-tooth-spacing -2-43-mm-716066? SPartner = faw and this band saw www.dictum.com/en/power-tools-sawing/pegas-scroll-band-saw-716062?sPartner=faw with the included Roller guide. Greetings, Arnold

[@gunterschone8402]

Schönes Video, Arnold. Rudi sieht super aus. Kleinen Tipp habe ich evtl. für dich noch. Was wäre, wen man das Rentier auf die Seite legst und dann einen kleinen Schnitt ins Gesicht macht, um den Mund darzustellen. Erst etwas einsägen und dann schräg halten um den Mund auszuarbeiten. Sorry, ist mir gerade nur so eingefallen. :-)

[@FEINESausWUPPERTAL]

Wir wollen es ja nicht übertreiben ;) Es freut mich, dass er ansonsten gefällt :)

[@gunterschone8402]

Hallo Arnold, Smile war ja nur ein Gedankendank gewesen. :-) Stimmt, ansonsten ist Rudi super.

[@FEINESausWUPPERTAL]

Danke.

[@Rufio6814]

Have plans?

[@FEINESausWUPPERTAL]

Yes, my plans are to stay healthy myself :)

[@Rufio6814]

@@FEINESausWUPPERTAL how about deer design plans?

[@FEINESausWUPPERTAL]

Unfortunately, I do not sell my sawing templates (plans) outside the country. Why? There is a famous Canadian woodworker with a German-sounding name who published a 3D reindeer template from a template designer over a decade ago - and, mind you, named this designer in at least one of his videos. Afterwards it was said: "based on a template by (wrongly) the Canadian woodworker". - and not the creator with presumably fewer KZbin followers. The name of the originator was mentioned by the Kannadian as already mentioned and hardly registered by the viewers. So countless other imitators of the published 3D template were, in my opinion, unlawfully earning KZbin Adsense revenue. So I will wait until a certain day when my templates can be attributed to myself - regardless of whether I have 5 million or 20 million clicks. Greetings, Arnold Translated with www.DeepL.com/Translator (free version)

[@Rufio6814]

No worries, I just wanted a pdf copy of the template if you had one, I have no problem free handing my own, thank you.

[@FEINESausWUPPERTAL]

As long as my designs and templates are not so well known that they can be attributed to my person (as the author), I will refrain from passing them on. I don't want to see others using other people's (in this case my) feathers. I hope you know the [German] proverb: "To adorn oneself with other people's feathers! Greetings, Arnold

[@glennhelwigwk8p530]

How can I buy a template of your reindeer?

[@FEINESausWUPPERTAL]

The tpattern is currently not available, it is not being sold. Greetings, Arnold

[@mikebowker9555]

where can i get the template please

[@FEINESausWUPPERTAL]

Unfortunately I have to tell you that my templates are currently not for sale. I hope you understand. Greetings, Arnold Schoger

[@chlenishev]

pegas? а нужно было назвать pidaras

[@FEINESausWUPPERTAL]

?

[@chlenishev]

@@FEINESausWUPPERTAL ну это типа шутка глупая такая.

[@FEINESausWUPPERTAL]

@@chlenishev 🤔