Рет қаралды 441,295
How to add a mischmetal fire rod to an Opinel - simple Opinel customizing technique.
By using a long dog tag chain - or a piece of 550 paracord - instead of this short one this setup can also give a practical emergency neck knife.
Modified knife: Opinel No. 9, standard carbon steel blade and beechwood handle
Mischmetal rod: plain mischmetal ferrorod, 6x60 mm
Chain: dog tag chain
Tools: Bosch driller, Swiss Army Knife, Sandpaper (100, 600)
Oils: used Furniture Wax, Vaseline, Sesame Oil (between each layer sanding with 600)
Blade finish: Never Dull
This is a Video Response to 85Grasy's 250 sub challenge.
/ 85grasy
=====
Hier eine kleine Mischmetall bzw. Ferrorod-Variante für ein Opinel - der Firesteel wird in einer Bohrung im Griff verstaut und einfach durch eine kurze Kette gehalten. Mit einer langen Kette (z.B. die von einer Hundemarke) oder einem entsprechend langen Stück Paracord taugt das Set auch als praktisches (und außerordentlich preiswertes) Neck Knife. Die sonstigen Veränderungen am Opinel (i.e. wie üblich Klinge und Griff an individuelle Bedürfnisse und Geschmack anpassen) sind Standard.
Modifiziertes Messer: Opinel No. 9, Karbonklinge und Buchenholzgriff
z.B. online erhältlich bei: www.mein-tasche...
Mischmetall-Stab: einfacher Mischmetall-Stab, 6x60 mm
z.B. online erhältlich bei: www.outdoormess...
Kette: die kurze Kette stammt wohl von einer alten Erkennungsmarke/Hundemarke
Werkzeuge: Bosch Akkubohrer, Schweizer Messer, Sandpapier (100/600)
Öl: Möbelwachs, Vaseline, Sesamöl (jeweils nach Politur und Vaseline wurde mit 600er nachgeschliffen)
Klingenfinish: Never Dull
Das Video ist als Antwort auf 85Grasys 250-Sub-Opinel-Challenge gedacht ... sein sehenswerter Kanal ist hier:
/ 85grasy