In this video i show you how to prepare a Cool Head for installation, install o-rings and torque to spec. Thanks for watching and remember to Sub!!! m. groups/2187390...
Пікірлер: 186
@altonmclaughlin26284 жыл бұрын
Your videos are priceless!! Especially for a person like me that handy, but doesn't know what the hell he's doing and is on a budget! Lol! Thanks for taking the time to explain and teach us! The banshee community owes you big time! Thanks again!
@samdayton8662 жыл бұрын
I dont mean to be offtopic but does anybody know of a way to log back into an instagram account?? I was dumb forgot the account password. I appreciate any tips you can give me.
@maxtonjohan80642 жыл бұрын
@Sam Dayton Instablaster =)
@samdayton8662 жыл бұрын
@Maxton Johan i really appreciate your reply. I found the site on google and Im in the hacking process atm. Takes a while so I will reply here later when my account password hopefully is recovered.
@samdayton8662 жыл бұрын
@Maxton Johan DAMN IT ACTUALLY WORKED! I literally hacked my ig password within roughly 30 mins of using the site. I had to pay 15 bucks but definitely worth it :) Thank you so much you saved my account !
@maxtonjohan80642 жыл бұрын
@Sam Dayton You are welcome :)
@calebcrawford37183 жыл бұрын
Thank you for all the great Banshee videos, this is the 4th one I’ve used now! Always very thorough and in depth in your descriptions.
@bjs0010014 жыл бұрын
Thanks for the video. I'm going to be installing a cool head on my Banshee next week. Nice to see it done before I start. Thanks again!!
@jasonwulff83415 жыл бұрын
This was such a great video. You are very good at step by step instructions. Thank you for the info
@elimartin51056 жыл бұрын
I really appreciate your videos and your patience thanks man, God loves ya
@mygreenz10005 жыл бұрын
You do great videos, almost didnt watch because of the fan lol but glad I stayed tuned. I've learned alot already from your videos. Keep up the good work.
@Stantonjonathon09164 жыл бұрын
My banshee that i just bought just got rebuilt, so im gonna ride her till she quits then do the 421 that you talk about but this winter i wanna put better air system and what else can i do to make her quicker shes got top end sprockets and exhaust im going back to stock sprockets i really appreciate you taking the time to share your knowledge, your a good man and bro.
@twinturbo34704 жыл бұрын
Just installed my Cool Head......Thanks for the help, great video
@SilentKille898 жыл бұрын
i dont get it how does this channel only has 600+ subs so much information Thx for the vids Sir!
@kevingalindo18 жыл бұрын
Thank You! help spread the word! if you have any video ideas, feel free to ask.
@marcusfrancart7 жыл бұрын
Armando Da Silva yea right this is better than clymer or haynes
@paultaylor1983 Жыл бұрын
Thanks for the info on this Kevin… I’ll be doing my cool head when it arrives
@artiexr2226 жыл бұрын
Your videos are awesome,very informative and a great watch,thank you.
@juansanchez75752 жыл бұрын
Thanks for all you do it really gets me thru my projects to me your the best 👍
@wahiawabound8087 жыл бұрын
man you got great how to videos i just bought my first banshee for a $1,000 and it was a bit rough but all your videos is making my bike come together like how it supposed to be thanks.
@kevingalindo17 жыл бұрын
wahiawabound808 Your welcome
@wahiawabound8087 жыл бұрын
South Texas Banshee i got a question my banshee is blowing more smoke out of the right exhaust while the left one has less, i cleaned the left side carb because it was leaking fuel what should i check or change i would appreciate your opinion.
@AaronMartinCOOLVIDEO5 жыл бұрын
Nice tutorial and Grace works good for me.👍🔧
@WestCoastRoller7 жыл бұрын
Another consideration is if your doing a top end or removing the cylinders, upon installation install cool head first prior to tightening and torquing cylinder nuts. This will allow proper alignment of head to cylinders. I messed up one before doing this backwards!
@smackdaddy1ful3 жыл бұрын
going to dunes this weekend and switched from a 19cc dome to a 22 cc dome and carbs are a 28 oval bore. Top end sputters with the new 22cc domes on top end, my question is do I up the jets or go down on the jets? All test have been done at sea level. Thanks man, you are the man when it comes to banshee's!
@thatonerepairguy47845 жыл бұрын
Trick I learned for the putting grease in to hold orings in at Walmart they have these syringe type medication measurer for giving kids cough syrup fill it up with grease and u can follow the groove while way around just makes it easier for me
@antonreints-bok95517 жыл бұрын
baie dankie jou videos help baie ek geniet hulle en jy ken jou werk
@6GEARPINNED Жыл бұрын
perfect video. are you using crush washers with the top of the cool head stock nuts ? thanks
@knightrider42616 жыл бұрын
Hello sir, first of all great video. I have a question. My banshee was measuring 120 psi in both pistons after a fresh re-built with new porting job, bored over .020, 19cc domes on ADA head and .025 base gasket. I was having problems starting it cold which I found out that I had the carb. Bowls installed wrong after watching your videos. I was using WSM pistons and my banshee broke the left piston, I replaced those with wiseco and installed 16 cc domes and installed a .015 base gasket, my compression is reading 185 psi which ADA recommends 110 octane race fuel. Some of my other mods are time plate +4, Vforce 4, and jetted carbs, the squish measured .040 both sides and the leak check was good. Do you use race fuel for 185 psi compression measured cold or what do you recommend? Again thanks for the vídeos and keep up the good work.
@quantumtree68346 жыл бұрын
just picked up a 03 banshee,its leaking coolant out the head n threw the pipes. seems to be condensation in the head aswell when i look threw the head. could this be a head gasket n will i have to do a complete top end rebuild??? thank u for your time
@jessesanchez93647 жыл бұрын
do I use the spark plug that is specifically made for my banshee or do I need a special spark plug if I have work done to the engine?
@juaneee115 жыл бұрын
Any special procedure to bleeding out air pockets after installing Cool Heads and adding Coolant ?
@frankivey10747 жыл бұрын
Have you made a video on building a wire harness
@BoostedMonkey4g632 жыл бұрын
Quick question, what would be the best approach to remove the cylinders if one of the pistons is stuck in one of the cylinders because some ran the engine with just gas and no oil?
@brianreiff81015 жыл бұрын
Do cool heads come with Orings in the box or do you have to buy them separately
@jessesanchez93647 жыл бұрын
what kind of grease did you use?
@1991tommygun4 жыл бұрын
Thanks!
@youngsiah198Ай бұрын
I ended up buying a cool head but dad ending up getting the ebay version instead of pro design im just a lil concerned on the domes where the oring sits my domes dont have a oring slot but it came with green ones n im just dont know if its wrong or do i put the oring on top of the cylinder block and then the dome on top i just dont have a slot where the oring stay with out slipping out when you flip it upside down to put the dome on top of block where piston comes out of thanks!
@ak47man20027 жыл бұрын
i was wondering of you can do a top end rebuild video...no top end banshee videos are good. i dont know what the ring gap should be...mines 0.027
@djmystery72356 жыл бұрын
How can one have so much wind inside a garage. INSIDE A GARAGE FFS
@bigspoops72284 жыл бұрын
im a bit late but it was more than likely a fan pointing right at the mic
@nerdrhythm74264 жыл бұрын
what cc domes are those? what cc domes do u recommend for pump gas at 800 feet above sea level?
@UniversalContentTv2 жыл бұрын
What type of domes to use on a 392 to use with pump fuel
@itsmigz55933 жыл бұрын
Can you do this cool head install while the engine is still on the bike?
@construccionesremodelacion52967 жыл бұрын
HAVE CYLINDERS AND PISTONS TO 400CC AND COOL HEAD, WHAT SHOULD I PUT?
@evanwilliams26023 жыл бұрын
Question my man. So when I installed my engine after a rebuild I am having coolant leak from there the cool head meets the top of cylinders. It actually showed signs of leaking before I even started the engine for break in. Now when I installed this is know for sure I put some metal like head gasket on the engine where cool head meets cylinders. I noticed in your video you did not. I'm guessing that's why I'm having. Leak by. Let me know I noticed you didnt use that metal head gasket before putting cool head on
@kdcustoms12725 жыл бұрын
so how did you torque the cylinder nuts>?
@ak47man20027 жыл бұрын
is .027 the right size for ring gap
@dadvskids963111 ай бұрын
What size domes should I use on a stock motor. I'm running toomey t5, vforce 4, and kn filter. I ride in glamis.
@edgardoalvarado35427 жыл бұрын
Hey man awesome vids im just getting ready for when i buy a banshee should be some time before the summer but do you think you can make a video on coolant service draining it and cleaning the system then refilling it ?
@kevingalindo17 жыл бұрын
Edgardo Alvarado Sure man I can do that for ya!
@edgardoalvarado35427 жыл бұрын
South Texas Banshee thank man i feel like s pro just paying close attention to all of your vids
@giovanni22142 жыл бұрын
My banshee doesn’t turn over when it did it would be a few minutes now doesn’t start I found coolant in the left exhaust I have a cool head installed I’m assuming it’s the oring correct ? I did a compression test and a leak down test 125 both sides and leak down went good any help
@bmjca1234 жыл бұрын
Hey do you any reason as to why I have got18 o rings after un packing my cool head and no large o ring? Two ones around the size of the second to largest o rings you have came with mine instead of the large one
@OscarHernandez-or5ig8 жыл бұрын
I had a questions about my banshee and you seem like the right guy. I got a banshee 3 months ago and when I wasn't home some family was here and decided they wanted to ride it. when we came back the oil was leaking and replaces some parts. Later it wouldnt run so but would turn on so when we took it apart one of the pistons was broken. Do you know what could have caused this?
@kevingalindo18 жыл бұрын
it was run really hard, might have held it pinned too long and leaned out and seized a piston. if it had a small air leak and was already jetted on thr lean side, that's a recipe for disaster. A properly tuned and built banshee engine will take tons of hard hours, I know of stock 90 models still on the original top ends.
@mr73superduty414 жыл бұрын
High will you know where to order Yamaha banshee 68.9 piston and rings
@martinmanzano81593 жыл бұрын
I have a modquad head the 2 back studds im having gasket problems being pushed out it has happened 3 times now have you ran into the problem and how did you fix it
@JC-mn6qn6 жыл бұрын
Do you have a video on squish
@infamousboii19188 жыл бұрын
good info like vids
@kevingalindo18 жыл бұрын
thanks
@katanovsky7 жыл бұрын
Can you explain to me what the meaning of domms is? And what are they for? thank's for your time... I love your videos Nice job
@Keyno777 жыл бұрын
Gerson Silva smaller domes increase compression, but then you need higher octane fuel to prevent detonation.
@boostedego60435 жыл бұрын
Off subject but any idea why my stator wiring is getting hot? The regulator is also very hot. Thanks
@mannysalinas66533 жыл бұрын
How do you know what comes to put on?
@3rdaxis6495 жыл бұрын
There is a torque pattern you need to follow (Same has factory) and you have to torque the nuts to 12 ft. lbs. first then 22.
@briancarson64065 жыл бұрын
He uses his impact driver witch seems to be abound 12
@DAWAXFAX6 жыл бұрын
Is there piston in there only thing thats confusing me
@donaldtate33724 жыл бұрын
Audience, do you sale banshees, and how long have you worked on them?
@infamousboii19188 жыл бұрын
ok thanks
@SoLaRpLeXis032 жыл бұрын
I have put on a 421cc the gasket keeps leaking and water coming out the exhausts what am I doing wrong ? Noss head
@motomonnat72834 жыл бұрын
Can you put a cool head on a stock banshee that only has lectern carbs
@kevingalindo14 жыл бұрын
Moto Monnat sure you can.
@mrtbay28773 жыл бұрын
is there this many bugs in texas?
@jonathanstone12524 жыл бұрын
Do you not have to use gaskets you just use the O-rings for the cool heads
@marcusfrancart7 жыл бұрын
as i torque my head down(chariot) i dont wanna go hard i got the same wrench you do i feel as if im torquing to hard cause 20lb isnt much any tips
@jfuzzymans90805 жыл бұрын
For reals man I feel like it’s going to freaking snap
@charleshansert45145 жыл бұрын
Ok first off I dont know whole lot about banshees. I was given an 87 frame with a motor with pro design cool heads. it was last touched in 1999 before i got it. i got the cool head o ring replacement kit just cause rubber goes bad.. should i just plan on tearing the motor down and redoing all the seals and get eyes on what pistons i have. motor turns over easy ,wasnt stored with gear oil in the crank and seals still look new. the man who built it passed away in a motorcycle crash around 2000 so he isnt around to ask. Im assuming if its stock a compression test will tell me right away what im working with or if it had leaks from sitting for 20 years. im in the process of rebuilding it all for trail riding i got the 28 keihen pwks carbs, reed spacer and reeds and boost bottle and k and n pods... im terrified since i dont know what it started with i wont know how to get the jetting right and i melt or detonate the motor. i dont know what size domes i have.. are they marked? i bought the clymers manual but waiting on it. You do great videos and they've been a big help with the swing arms and j arms already.. i also have a bar on the frame right above where the steel break lines should go and i cant tell if its original or was added the shocks are gonna rub.. id love to send you a pic and you can tell me if its safe to cut off or if its factory. Ive seen it on no other frame from any year of banshee but its painted same as the rest of the frame. any help or suggestions or even pointing me to video would be appreciated.
@kevingalindo15 жыл бұрын
Charles Hansert 361-243-0431 shoot me that pic and we’ll talk about the rest of the stuff too man.
@lexomotorsports Жыл бұрын
👍
@jacobdewberry46183 жыл бұрын
What cc domes do I put in on my stock banshee when I install the cool head
@nickm54603 жыл бұрын
21cc domes, you can still run pump gas 93 octane.
@koltenmeyers35845 жыл бұрын
Can you put 20cc domes on stock bore
@kevingalindo15 жыл бұрын
Sure you can bud. Just watch that spark plug. If it backs out you'll need to run race gas. No higher than 4 on timing
@mayoslayshoe50814 жыл бұрын
What size of domes do I get for stock pistons? Plz help me
@kevingalindo14 жыл бұрын
MayoSlaysHoe M that depends on what compression you want. 22 cc is stock,21 will give you around 153, 20 will give you up to 180 psi
@musarapio_hha7 жыл бұрын
una pregunta, soy de argentina, se puede instalar la tapa "Cool Head" , con los cylindros originales?
@Keyno777 жыл бұрын
Musarapio_HHA si se puede, solo a la hora de escojer los tazones que sean para el estilo de piston que tienes por que a veces ya vienen con pistones de blaster. Otra cosa que rl tazon sea de 21 cc o 20 cc por que si obtienes mas chicos la compresion subiria bastante al punto de que necesitaria mejor combustible con octanaje mas alto de 93
@Polo67558 жыл бұрын
are you selling the blue banshee with the gold rims or the yellow one?
@kevingalindo18 жыл бұрын
hey whats up!, gold rim banshee was sold the day it was completed. yellow isnt for sale.
@sisneycastillo12045 жыл бұрын
what do cool heads do? and can i install them on my bone stock banshee motor ?or is this an upgrade that you do after????? p.s im new to banshees and motor work
@tomasfelix76055 жыл бұрын
They supposedly help with cooling, bike can be stock to install one. Just make sure you put the right domes
@infamousboii19188 жыл бұрын
yeah fo sho.. i got a quick question..what size jets u need to install?? i have pipes and k$n filters mottor stock lmk thanxs
@kevingalindo18 жыл бұрын
at sea level, with no air box lid 300 mains and 27.5 pilots air screw at 1-1.5 turns out from.closed and needle at 3rd clip from top (or middle) if you don't know your elevation just Google your towns elevation.
@DAWAXFAX6 жыл бұрын
What if im below sea level with vito pipe and k&n filter but might be changing to two uni filters with over head u tub on carb stock motor...
@postaszewski8 жыл бұрын
I can't find it, but i thought i saw on one of your other videos, the website to order the cool head kit from, and you also showed the chart to know which domes to buy. Can you give that information? I don't run higher than 93 pump gas. 22 and 21 cc domes work for 93 octane but 21's have more compression. Which do i choose? I'm on a new top and bottom end as of 3 years ago and I don't ride a whole lot so the hours are low.
@kevingalindo18 жыл бұрын
20cc domes will be fine on pump gas, here ya go www.ebay.com/itm/400261742906
@postaszewski8 жыл бұрын
Thought I read that 20cc had to have 98 octane? I run 93.
@kevingalindo18 жыл бұрын
+Paul Ostaszewski I myself run 200 cc domes on 2 of my bikes with +5 timing on 93, also know tons if other guys that do too. 20 draws the line, 19 and you'll need 50/50 mix or pump/race gas.
@postaszewski8 жыл бұрын
+South Texas Banshee Thanks Kevin!
@kevingalindo18 жыл бұрын
np!
@Mijailrosales7 жыл бұрын
saludos desde ecuador una consulta disculpa que te escriba en español ojala me entiendas tengo una banshee 2005 y quiero potenciarlo estoy por ponerle las vforce 4, carburadores keihin de 28 mm, cámara de gases pro desing te parece correcto o crees que deba mejor comprar otro tipo de accesorios
@calastrcas7 жыл бұрын
Para darle un poco más de potencia sin gastar tanto portea los cilindros y con los Vforce pero nesesitas tener pipas y ajustas los carburadores con jets más grandes y te funciona muy bien saludos desde tijuana México
@construccionesremodelacion52967 жыл бұрын
saludos amigo quisiera consultarte algo, mira mi banshee lo tengo cilindros porteados y pistones a 400cc tengo pipas toomey 5 cabeza cool head espreas a 240 en alta y quiero saber que cupulas le tengo q poner a la cabeza?
@Keyno777 жыл бұрын
Mijail Rosales placa para adelantar el tiempo muy baratas en ebay y el tornillo o herramienta especial para quitar flywheel y ganar acceso.
@jacobrodriguez32967 жыл бұрын
when your using that style torque wrench your suppose to stop when you here the first click not click it 3 more time BC now your over torquing the nuts when going past the first click
@kevingalindo17 жыл бұрын
Negative, when I re check them, i pull till the click. the nuts/ bolts don't turn any more then they were to begin with. if the torque is set to say 50ftlbs, you can pull it 100 times it gonna click at 50, unless you pull past the 50 you won't over torque it.
@frankivey10747 жыл бұрын
I have stock cylinders bored over to 67mm with pro design cool heads. What domes should I run?
@kevingalindo17 жыл бұрын
Frank Ivey Got them sleeved or? How you get 67 on stock bore, the answer though is BB domes
@frankivey10747 жыл бұрын
South Texas Banshee Ok thanks wat is the best CC domes to get
@kevingalindo17 жыл бұрын
Frank Ivey 21cc should be safe for pump gas, I and a lot of guys run 20cc domes with no problems. Just run 93 octane and keep the timing below 4°. Also, be sure to plug chop it. You should be fine man.
@frankivey10747 жыл бұрын
South Texas Banshee thanks
@oscarluna69657 жыл бұрын
how do I know what doms to use on my banshee?
@polosmith28347 жыл бұрын
oscar luna depends on do i wanna run pump gas or 110
@marks79luv8 жыл бұрын
hello sir I got a quick question I have a 421 cheetah that I only do mainly trail riding on and I do believe my carburetors are 38 millimeter keihin twins, my banshee eats a lot of gas and I can't go very far on the trails maybe 30 miles eats up a whole tank what can I do to get better gas mileage
@kevingalindo18 жыл бұрын
That's the nature of the beast, 30 Miles is about right, I hear some guys get 26. You could try smaller carbs, but all in all, the engine will still require a certain amountil of fuel. Not a lot you can do honestly. smaller carbs will however give you more low end grunt.
@marks79luv8 жыл бұрын
+South Texas Banshee OK
@Zalagar6198 жыл бұрын
You can however get a 5 gallon Desert gas tank, it'll help you last a while longer
@STILLNIGHTPEARL6 жыл бұрын
Best mpg is through a stock banshee, stock jetting, the more jet, more fuel, no way around it.
@Zalagar6198 жыл бұрын
Can I use Chocolate Pudding? I don't have grease...
@kevingalindo18 жыл бұрын
I don't know what to say to that sir.
@Zalagar6198 жыл бұрын
LMAO
@mrglenn28797 жыл бұрын
i noticed u didnt use the black cool head gasket
@kevingalindo17 жыл бұрын
jr escobar black cool head gasket? Cool heads only use O-rings.
@frankivey10747 жыл бұрын
Do you have to put a gasket on first?
@kevingalindo17 жыл бұрын
Frank Ivey No gasket for a cool Head, they use o-rings only.
@frankivey10747 жыл бұрын
South Texas Banshee Thanks
@ohshitnation30918 жыл бұрын
can u do a video showing how to install a hour meter plz
@kevingalindo18 жыл бұрын
sure will, I'll do it tomirrow.
@kevingalindo18 жыл бұрын
hey bud just ordered an hr meter and I'll do a video on it as soon as I get it. Thought i had one here but gave it to a buddy.
@kevingalindo18 жыл бұрын
hr meter video is up.
@TheJeep24007 жыл бұрын
🖒🖒🖒
@williams69757 жыл бұрын
Can you put a cool head on a stock banshee?
@kevingalindo17 жыл бұрын
Shawn M Sure can
@DAWAXFAX6 жыл бұрын
Shawn M do i need my stock pistons
@UniversalContentTv2 жыл бұрын
On a modquad cool head
@961jj7 жыл бұрын
What size domes do i use for stock bore?
@kevingalindo17 жыл бұрын
961jj That depends on if you want to use pump gas or race
@961jj7 жыл бұрын
+South Texas Banshee pump gas
@kevingalindo17 жыл бұрын
961jj 20 or 21cc domes will be fine
@961jj7 жыл бұрын
+South Texas Banshee thank you
@961jj7 жыл бұрын
your videos are priceless they help me alot im building a banshee and without you i would be screwed
@ghostcon2 жыл бұрын
Great fuckin video man! Drop that cash app so I can buy you a cup of coffee!
@kevingalindo12 жыл бұрын
Lol sweet! $Southtexasbanshee
@romancor17 жыл бұрын
Can you install cool heads with no bored cylinders?
@kevingalindo17 жыл бұрын
+Roman Coronado Sure you can.
@klintcarman89676 жыл бұрын
Roman Coronado yes u can
@jaket90267 жыл бұрын
hell I wish mine fit but I couldnt get it on the damn cylinders
@kevingalindo17 жыл бұрын
bent stud?
@jaket90267 жыл бұрын
Casting problem on head parts so to late for refund went with oe head for now then I'll do Vito's stealth head
@ak47man20027 жыл бұрын
is that thr right size?
@kevingalindo17 жыл бұрын
Alec Thayer ?
@kevingalindo17 жыл бұрын
Alec Thayer sorry just seen the other question, thats too much, I take it the bore isn't fresh? for Wiseco top ring multiply your bore size by .004 for end gap 2nd ring multiply by .005 i.e. top ring 64mm bore= 2.52" x .004=.0100 2nd ring 2.52" x .005=..0126
@HondaMechanic14 жыл бұрын
What's the story about all the ants ...?
@jakedavidson98517 жыл бұрын
How much power does this add?
@kevingalindo17 жыл бұрын
It all depends on supporting mods, it helps the engine run cooler, cooler engines make more power. Depending on dome selection, higher compression will help add some low end punch. For instance you could run 20cc domes and then add °4 degrees of timing, and of you have a a good set of pipes, it'll make really good low end power.
@jakedavidson98517 жыл бұрын
Thanks a bunch man!
@kevingalindo17 жыл бұрын
NP.
@jakedavidson98517 жыл бұрын
Ok so how fast is this banshee i havnt got yet so its a 4mil with coolheads t5 pioes and silencers, brand new cylinder??? Its stretched out and sittin on ten paddle haulers
@jakedavidson98517 жыл бұрын
And also what major upgrade or upgrades can i do to obviously make it faster
@jamesjiles81397 жыл бұрын
what does a cool head do ???
@polosmith28347 жыл бұрын
James Jiles better performance head then stock also better cooling
@buckyrichardsonii25336 жыл бұрын
It runs a lot cooler but brings the compression ratio up
@jamesbuck92847 жыл бұрын
All that money spent on the engine and you used a green base gasket? Surely you could have ponied up for a cometic or OEM....
@kevingalindo17 жыл бұрын
These gaskets come with the vitos kits. I use them all the time. Never use sealant, never have a leak. I've used vertex, Cometic and K&S as well. people give alot if grief over pro design cool heads too. "theyre junk, they always leak" I have yet to have one leak.
@SatansExecutioner6 жыл бұрын
Did anybody see all the baby cockroaches crawling around at the beginning of vid
@kevingalindo16 жыл бұрын
Jason Stjohn ants they were ants lol.
@montefiveforty15 жыл бұрын
Bantshees
@donaldstandley94955 жыл бұрын
Horrible sound Why post a vid with sound like that
@kevingalindo15 жыл бұрын
some people can see something done and that be plenty good for them. Thanks for the comment! They all help