For more information go to my website at www.fuzzthepigu... #hamradio #baofeng #hack
Пікірлер: 40
@mostlypostie15 жыл бұрын
Good to see the experimentation, however for this to work correctly with an antenna like that one you have chosen, *you MUST use a coaxial coax feed from the PCB to the antenna socket that, is also grounded!* . Without this, the entire point from where you soldered the wire, right to the tip of the antenna becomes the antenna, and the Nagoya antenna has no ground reference. It will also therefore be non-resonant where you want it because it will be far too long!... So to summarize, if you add coax between the PCB and the antenna base, and ensure that the coax is correctly grounding the antenna base, it will work MUCH better than it did for you. (The fact it was receiving signals before you connected the antenna is proof of this not working correctly!) Good luck!
@user-hy4jt8sr6y5 жыл бұрын
Why going through that is too much hassle , it is easier to buy a radio with detachable antenna..😏😏😏
@iamsemjaza6 ай бұрын
NEAT! Looks like there's about 15 inches of wire in that coil antenna. One could stretch it out straight through a small hole in the top plastic and run it through some... shrink wrap maybe or thin tubing glued in place and have a "15 inch whip antenna" without a soldering job...
@jasonofcl85135 жыл бұрын
Did you try transmitting in VHF after changing the antenna? (Maybe try adding a dual band antenna and see if it works). Great video.
@rosskelly42005 жыл бұрын
Great hack! Looks the goods. Weirdly, it worked fairly well with just the SMA stub!
@Gunpowdermaniac225 жыл бұрын
You should measure the signal strength and swr before and after. Cool mod
@a_ham_like_me5 жыл бұрын
Nice mod! Did you solder the shield of the coax to the ground on the circuit board? Or just the center connector? Thanks!
@FuzzThePiGuy5 жыл бұрын
Just the center wire. Like how it was from factory.
@rosskelly42004 жыл бұрын
I am thinking of doing this... Where would I find the ground on the circuit board? Thanks:)
@chriscollingwood37295 жыл бұрын
Seems to work OK with a random length of wire attached.
@Coalrollinfurry5 жыл бұрын
Chris Collingwood counter poise
@MontajciKopekАй бұрын
can i make this on retevis rt24?
@Morcego5385 жыл бұрын
Did you tried it before moding in a urban area? If you did what range did you get?
@attilarivera4 жыл бұрын
I did mod alike and used a directional antenna. range encreased from 3km to 12km
@saored4 жыл бұрын
I have a Baofeng T1 radio, I restored it from the factory. my problem is to reset and when I use the softweare and the usb cable I give it either on the screen control + R or control + W it shows me 00 666.666 I do it with the up and down arrow and it does not show me the 16 or 19 or 20 frequencies it should have. What am I doing wrong or what am I missing?
@user-hy4jt8sr6y5 жыл бұрын
Why going through that is too much hassle , it is easier to buy a radio with detachable antenna..😏😏😏
@attilarivera4 жыл бұрын
There are places where people cannot buy stuff that easily so doing a modification like that is easier.
@danialphaomega4 жыл бұрын
Would of been way better if you uses an MCX to SMA or just MCX to antenna. Smaller more efficient
@peterfranklin6205 жыл бұрын
What SMA mount is that please? Plus where did you buy the mount from?
@FuzzThePiGuy5 жыл бұрын
It’s something like a SMA bulkhead. I had them laying around.
@attilarivera4 жыл бұрын
👏👏👏👏👏👏👏👏👏
@momotarohunso61525 жыл бұрын
nice
@Bard_Kobrina3 жыл бұрын
Спрашивается зачем? Есть аппараты с sma коннектором, например uv-3r pus!
@sugiyono9654 жыл бұрын
What name this cable??
@TioMuhamadNur5 жыл бұрын
what type of connector antenna? where can i get that?
@FuzzThePiGuy5 жыл бұрын
I got the antenna from Amazon. The SMA bulk head connector I had laying around.
@user-hy4jt8sr6y5 жыл бұрын
Why going through that is too much hassle , it is easier to buy a radio with detachable antenna..😏😏😏
@liml7355 жыл бұрын
Благодарю за видео! 55! 73!
@liml7355 жыл бұрын
@@mikrom1922 Без комментариев..... 🤔🤔🤔)
@tezaybudak98404 жыл бұрын
Connector name?
@FuzzThePiGuy4 жыл бұрын
It’s a SMA.
@tezaybudak98404 жыл бұрын
@@FuzzThePiGuy thanks 73's
@robertopreatoni7911 Жыл бұрын
Beside "I do it because I can", what's the point of this mod? The T1's whole point is its pocket friendly size. And its sensitivity stays awful... And please note that it received better without antenna, and that says it all.