Baofeng BF888s programming issue (Win 10) and how to resolve

[@darksceptre7]

I get an error message reading "Please check all connections and communications port settings" when I click "OK" on the data reading part of the process.

[@ojcorona]

me too, any solution?

[@rebwarebrahimire]

@@ojcorona Me too have a problem, any solutions?

[@monkeyeager9544]

Me too...

[@dorotab5351]

Need change decimal spearator to dot in OS Windows settings Eg in Poland decimal separator is coma and after change to dot BF480 program start workign correctly. Before that choose any settings change to 290.0.

[@agusseptiadi5790]

Please check data cable first...

[@meghanmclaughlin1662]

My baofeng, when I turn it on it will turn on but not let me call on it or say the station it's on

[@hwarrior_ryder3624]

Do not try to change at VHF the new models due the radio will be demaged, I have 2 demaged the reception is that will be demage.

[@kevinbarrow4]

Hi do you know how to program vhf frequencies on the baofeng 888s I seen it done but it was not in English

[@thevabhas7225]

Sir....how can with out stop mic to work

[@stephenwilliams5201]

My only real problem was/is blowing the chip set. I learned to turn on the radio. (Just cracking the volume switch) the voice is a quite loud. And no doubt kills the chip set. After loosing 2 sets I learned to sneak up the volume. And use a white marker for start. then turn the volume knob to 2/3 rotation. And then make that spot yellow. seems to work well. Haven't lost a chip set sense. You are right. cheep Cable. So I too am saving up for a red cable. Tks

[@sueannehansher213]

It will only let me program channels 1-8. I can not alter the frequency beyond that

[@barryzoo5923]

Hi there any chance do you know can you leave both radios on one channel ..so it would be like a phone call rather than having to push the button i read about the vox function but can't seem to get it working any help or link to a another video would be a great Help thanks ..just bought a set

[@suomynona97]

How to turn on /turn off Vox. Select Chanel 1 or 2 or 3 to 5. Press the PTT and the Squelch button at the same time and while still pressed turn on it on and you will hear Vox on or Vox off.

[@suomynona97]

...still pressed turn it on and you will hear Vox on or Vox off. *

[@tireplusretreading895]

How to lock the frequency

[@endrihalilaj]

Hi I have a radio BFDX model BF-620 radio can you help me how to program ?

[@davebenham4933]

Using 888s software my new bao feng radios will not write stuck in chinese and factory settings. i have tried new software included which will not install and is all in chinese and the new cable does not seem compatible with my radios either. watched your video twice and dont see what im doing wrong. HELP Please

[@pietromusian6746]

Use Chirp Program with this is working well

[@agusseptiadi5790]

Chrip Or u can use 480 or 888s programming software...

[@WPGinterceptor460Interceptor]

same as the Retevis H777 radio... same radios! the so called SCRAMBLING on this radio is in fact "voice Inversion"

[@ruxsolis776]

This video is so helpful for me! Thank you for creating this video!

[@jean-mariemanceau4775]

traduire en francais

[@junkcarz4720]

Trying to make bf888 a police scanner

[@ПавлоАрдан]

Ну ти і нудний !!!!