How to program BF 888s

[@David-Masek]

4:49 Thank you very much for these first minutes of your video and this original frequency table. These frequencies & tone codes now finally works with all my Baofengs and another TYT TH-F5 set according this table. On the internet pictures are many different codes. These original finally works for me.

[@The123Now]

You're very welcome, I'm glad this video was very helpful! Have an awesome day

[@wmarkw12]

Hi Aaron. Thanks for the video. My computer won't recognize the COM. any ideas how to fix this?

[@The123Now]

Hi there, good question. Start by restarting your computer and make sure you have the correct com selected on the software. Also make sure your radio is off and plug it in to your USB adapter first, then turn the radio on and the calm should be recognized. Sometimes the firmware doesn't go into Data mode on the radio if it's already on first when you plug it in. Give that a try and let me know

[@collinkroeger2737]

Hi there, I have a BF-888S, and every time I turn it on, its just a loud white noise sound. It only quits when I switch it to narrow band, however I have confirmed it works in wideband. Any suggestions as to how to get it to stop the white noise?

[@FinishedProject]

Im having the same problem but it only is happening on a couple radios even though they were cloned...

[@MrTosetti]

If possible I would you like to knou how to program scrambler functions in these radios.Thanks a lot

[@Bikerscout1599]

So this will keep the radios strictly on FRC frequency's? I scored 6 of these and would be perfect with my Airsoft team. I just want to make sure I am using these correctly...

[@The123Now]

Precisely, these radios will only transmit and receive on the frequencies you programmed. To double check all you have to do is have the same channel on a standard walkie and if they talk to each other, you've successfully program them.

[@Bikerscout1599]

@@The123Now thanks.. just wanted to make sure.

[@papakobi]

Many thanks, do you have the saved file to be loaded?

[@The123Now]

I do not, you will have to go through and look up the FRS frequency chart on radioreference.com and just copy and paste them

[@dancotter7050]

Thank you this was very helpful and worked perfectly for australian UHF bands. The squelch setting at 3 is my o my problem. Constant background noise. Thanks again

[@toxicwar4507]

Hey mate, i have the same problem, i can comunicate whit other guys, but when they stop speaking, i hear buzzing sound all the time. how to fix that?

[@salx777x9]

Thanks for the video man, been looking all over google for this simple reprogramming guide, thanks gonna follow your steps once my cable arrives.

[@The123Now]

Salx777x I really appreciate the positive feedback, thanks for watching!

[@oceanresortinn1700]

Hello Aaron, how can I get the same software you are using in the video?

[@The123Now]

The Ocean Resort Inn Hi, you can google baofeng bf 888s programming software and you should be able to find a download client to help you install it. it was fairly easy for me to find. I hope this helps, good luck!

[@oceanresortinn1700]

Thank you never mind i got it!

[@oceanresortinn1700]

Hello Aaron, for some reason channels 9-16 are not being written, any idea what could be causing this?

I have a bf 888s. I want to 170.000 frequency it’s possible?

[@longkhoithai1820]

It won't

[@مجننالجنوقاهرابليس-ك1ن]

Bf-7110 Bfdx cable operating system Programming the PC software according to its communication needs?

[@JesseJonas]

So I did everything you said and now its Chinese and is making a a non stop screeching noise unless it's on channel 16 but I still can't here anyone, plz help

[@chrisfoliaki6603]

same to me ..if you read again its show blank for all freq ...I do the same things save and open write its give same result no sure why but i am using win 10 will try to use lower version and see what happen

[@MrSaintColtrane]

same

[@altaccount1815]

The fix I would recommend is to try using a disk. I installed the link for the software that he put in the description as well, and the same exact thing that your radio was doing mine was also doing. I then went on Amazon and found a BaoFeng disk with a USB and I read what was currently on it and it only showed channel 16, that is why that was the only one that worked, so I had to go through again and add all the channels, switched the language, and it worked.

[@L3o487]

@@altaccount1815 i have the same problem I just did all you do in the video i need help

[@halow24]

Same problem

[@FuadFoxKabaha]

Hi, how do I choose the appropriate frequency for my region? Should the frequency be random? What is allowed and not allowed? Thank you

[@The123Now]

What region are you from?

[@FuadFoxKabaha]

@@The123Now Israel

[@FuadFoxKabaha]

@@The123Now plaz

[@Commandos12]

after i reprogramed it, when it turn it on its constant statics, as if it's in constant scan mode. it talks when i use my other walkie talkie (on the same channel) and then revert back to statics again. the actual scan button under the talk button doesn't do anything. any1 knows why?

[@stephenwilliams5201]

Those wonder full pains. I'm just getting in after hiatus.of 10 years. "chirp" program allows you to set squelch~3 is good. Look in the line below memory's. (Far left side) For the inside works it's a treasure trove of tricks for the critter in that tiny box. "The honest man does well on the river of life" . And a bow for the man with the courage to learn.

[@anythinggames6083]

How can you set it back to its original settings?

[@DosManDan]

OK, anyone who followed this video and is using a NEWER radio...2007+, will end up with a radio that screeches. The software used in the video is for an older version of the BF888S. Please grab the correct software from this link: www.miklor.com/BF888/888-SW-ZTV68.php The website is one of the best BF888S resources you will find, and, is even mentioned in the BF User Guide. Uninstall the previous software (if you installed it). Install the correct one, then follow this link for the legal GMRS Frequencies: wiki.radioreference.com/index.php/FRS/GMRS_combined_channel_chart In the settings tab for the software...make sure to select English or your radio will be speaking Chinese. Hope this helps.

[@toptriode1604]

If you set the TX timeout setting to "off", does that allow you to transmit indefinitely?

[@The123Now]

I believe it will work until the thermal cutout turns it off aka, the transmitter is getting a little too hot.

[@toptriode1604]

@@The123Now thank you. I will be modifying the radio for a significant power reduction so heat will not be an issue.

[@Mcgiver1]

Is there anyway to add the squelch to the FRS freqs???

[@athulmohanan9425]

can we set tone for reciving and transmitting through programming

[@The123Now]

I don't believe these units have that function, they are budget units, the more expensive units typically the Baofeng/Pofung units with keypads support that function.

[@michaelscolfield14]

hi, when i read data from my bf888s the freq range is uhf. then if i change it to uhf and then program some freq. when i turn on my radio it will have continous tone playing.

[@brendanremus908]

same here

[@michaelscolfield14]

@@brendanremus908 i actually got this working i just forgot how

[@brendanremus908]

@@michaelscolfield14 5 days of trying, I've given up at the moment.

[@jerrymorales6570]

Where do i get the 888s pc software i have windows 10

[@policeofficer65]

Every time I program the radios they go back to default Chinese with no channels and the beep? The stock frequencies I saved and reloaded it and it works but can’t program anything! Thanks

[@The123Now]

Another person recently had the same issue, the software relies heavily on the proper connection to the radio. When you connect the radio try to read the radio with the software first to verify that it's properly communicating with the cable, then upload/load your desired channels. Don't forget to double check the settings to see the language sets, then write/program the data to the radio.

[@TBBAD_]

Is there any way to do this on Chromebook?

[@The123Now]

I'm pretty sure the software is exclusively for either Linux or Windows. Chromebooks used in android-based OS built by Google I don't believe there is any app support for these radios through Chrome OS

[@kevinbarrow4]

Hi do you know how to program vhf frequencies on the baofeng 888s I seen it done but it was not in English

[@UpBeat88]

there is a different model for that fun stuff

[@shebby0204]

hey great video man. i'd like to ask if i use a new antenna for my bf 888s to get better range, do i need to program it to accept the new antenna?

[@The123Now]

paul anthony bulao, No sir, those antennas are what's called "hot swappable" this means its reads to go once attached. I hope this helps, good luck!

[@shebby0204]

Aaron Hargett thanks so much man!

[@vaggbaba]

I lost 2 seconds after I push the button to talk to another 888s. Is there any setting I can do?

[@peterharoldjanakjr2078]

This radio already comes with working channels. So what purpose is there to what you show?

[@The123Now]

The pre-programmed channelsthat come with the radio are unlicensed and may interfere with certain law enforcement or first responders. The frequencies can be closer than you think. Was doing that programming you could be held responsible for interfering.

[@habbibmidtimbang6951]

Hi, how to the radio voice?

[@technovan1133]

does this set up encrice the range of the radio?

[@The123Now]

Range is a tricky one, these radios are rated for 3-5 watts, typically 5 miles, but that is determined by the terrain around you, city areas are 1-2 miles, open field (optimal condition) is 3-5 miles. I hope that helps.

[@linukaedussuriya848]

Hi, It was a wonderful video. I've seen that you have stop posting videos on youtube. Please start posting agin. If you post more videos of radios you can get a good amount of views.

[@MaxPlayle]

Since Baofeng Radios can communicate with Esynic zESY666 radios, as described on the Amazon page... they also look exactly the same without the logo. Do you think can use the 888S programming software with the Esynics? Also do you have to program in the UK, I haven't had any interruptions so far.

[@The123Now]

You should be able to look up the "Uk family radio service frequencies" and you should be able to program it, i doubt that the 888s software works because the other company may have installed their own firmware version that may be incompatible with this software, but it's worth a try! Good luck!

[@redjohn20001]

Have you ever tried out the Scramble function with this software. I have tried using Chirp via edit but it does not enable scramble on these radios.

[@UpBeat88]

the scrambler is a gimic

[@boomerok4532]

@@UpBeat88 You mean it's there just for the sake of it, and it doesn't matter on or off?

[@BurittoBaker]

Do I need a license for my baofeng 888s i didnt program it.

[@The123Now]

As long as your local law enforcement doesn't have similar frequencies ( possible interference ) you should be ok. However, double check to be sure! You may have issues if you choose to not program, if your default frequencies overlap licenced channels. I'd recommend programming anyway, better safe than sorry. The programming cable costs around $5, well worth it to stay out of trouble. Hope this helps.

[@mikebouchard8753]

Arron, have you found the link for the 888s software. I have an event coming up next week and I would like to use my new radios. (The one that shows 888s on your you tube page, not the older one which does not work). Any help would be greatly appreciated. Mike

[@The123Now]

Hi Mike, I have found this link and i works for my Windows 10 pc, It should work for you but if not then I would not be able to explain why or diagnose that. www.miklor.com/BF888/888-SW-BF888S.php

[@clockwork421]

Its bf888s_v1.05 from what I seen Or atleast that is what worked for me. I searched for the download in Google and easily brought it up. Should work with all versions of windows I would think.

[@junkcarz4720]

Can you make them as a police scanner

[@Trd2020]

So after you program you will be able to talk with the kids walkie talkies?

[@The123Now]

avalanche correct. Only if they are on the same channel listing.

[@camaro67rsss67]

Could I reprogram the b888s, same Frs and use them without license? Thanks for your help

[@The123Now]

FRS and GMRS are designated and pre-licensed by the FCC for the US soil, foreign countries like the UK and Canada may not allow FRS/GMRS so be sure to look that up IF your NOT on US SOIL, you could face issues with local and/or federal law in foreign soils if not compliant with their Communication laws and regulations. I hope this helps, good luck!

[@camaro67rsss67]

Aaron Hargett thanks

[@bad001bd]

I would recommend dowloading chirp over using any sort of provided software.

[@RustyX2010]

still didn't work

[@mr.e9700]

Hi, does "beep tone" mean when ever you release the ptt a beep sound plays? Thanks!

[@The123Now]

Hi, to answer your question, it is no, the beep tone will briefly indicate that the specific channel has no programming/no frequency specified. I hope that helps!

[@Chris-sm8kh]

Mine is saying “Cannot Connect the radio” how do I fix it that?

[@brockanthonyross841]

Lol...I went through the same beginnings when I tried to reprogram my bf888s... The solution was so ... in my face.

[@The123Now]

I'm glad you thought that the video was helpful!

[@VanderJay]

Which channel you use to communicate with radio?

[@The123Now]

I switch between channels 7-15 on the FRS/ GMRS channel bands

[@joeltampus329]

hi sir Aaron Hargett, I'm here in the Philippines, thus the default frequencies of the baofeng bf 888s are also illegal here? and also I noticed on your video when you encoded the frs gmrs codes on the next unit of baofeng radio, you did not attached the antenna when you switch it on, is that okay?

[@The123Now]

JOEL TAMPUS the only reason I disconnected the antenna is so that it wouldn't broadcast far enough to possibly interfere with other radios it was simply for testing the close-range radios next to each other otherwise there's no purpose I just didn't want to interrupt anybody else's radios since I was just testing to make sure that they work together. I hope this helps let me know if you have anymore questions. Good luck!

[@joeltampus329]

thanks for the reply Aaron, what about the frequencies you've input in the video? does the freqeuncies work here in the philippines?

[@enzopulido2579]

Can you try encode a vhf frequency cause i saw someone using vhf frequency on those radio

[@MrBucko3556]

Where do I download the software please help

[@The123Now]

You'll have to try a few different sites, I just googled it

[@nargarider8532]

Can i do this with the pmr 446 frequencies that are commonly used? ( cobra mt 200 )

[@The123Now]

Yes! The PMR frequencies are within the BF888s frequency range on the UHF/VHF band, just look up PMR frequencies and plug them in the software. I hope this helps, good luck!

[@handymanharold]

hi, anyone with the original settings can you export me the file i messed something up cant figure it out

[@The123Now]

The software should give you the option to reset the radio to its default settings and then once you hook it back up to the computer and read its files they should be back to their default form and you can remodify the frequencies you desire. Let me know if that helps.

[@skullyb0i191]

Hey uhh can these connect to the police, Fire fighters, Government, Or other walkie talkies?

[@skullyb0i191]

Okay ty 👌

[@skullyb0i191]

@SilverStone XAdvanced do u need to program the baofenf uv 5r?

[@skullyb0i191]

@SilverStone XAdvanced wow thats cool and also i see that there really cheap are they like well made? Or like if u drop it it will break?

[@visiter127]

hi mate , as the radio come working why would I program it pl total ignorance here ?

[@The123Now]

visiter1 I'm glad you asked, here is why, the default channels may interrupt law enforcement channels which is highly illegal, FRS & GMRS are channels that law enforcement are not licenced to use. That means if you use those channels you'll be safe upon operation. I hope this helps.

[@visiter127]

Aaron Hargett thanks so much for ur clear ans I'll get right on programming them

[@The123Now]

visiter1 your very welcome! Good luck!

[@danielreeves1998]

Is the baofeng walkie talkie compatible with an gmrs walkie talkie?

[@SustainableGal]

no

[@rbenakatti]

How to increse Baofeng BF -888s Radios range

[@The123Now]

The easiest way to do that is to get a high-end UHF VHF radio antenna. The windings and what it's made out of will increase the range and reception capabilities of this radio

[@The123Now]

It want to terribly much but it's all you can do considering that the radio is only so powerful.

[@josephpardilla5009]

what wbsite did u download it on u dint leav a link

[@The123Now]

Joseph Pardilla www.miklor.com/BF888/888-SW-BF888S.php

[@justinbob369]

COOL TNX

[@heintapao3712]

hi mate. i just want to ask if there is anyway to have a private channel that you and your mate can talk privately?

[@The123Now]

Hein Tapao you can use what are called squelch codes where people cannot interrupt the same channel you are on and you will not hear the people that don't have the Squelch code programed. You should be able to do some simple research on Google and it should provide the answers you're looking for I'm going to do a new video or I demonstrate these new things that people are asking for.

[@heintapao3712]

okay thank you.. looking forward for that video

[@medounenoeldia4783]

Hello, I have a Neuni N17 and Retevis RT5 but i can't make the programmation. Could you help me please ?

[@The123Now]

Hi there! I apologize for the delayed response, but, I have a theory. I did some research and based on what I briefly learned I believe that the individual brands for example, Bafoeng, Retvis, and Neuni use their own firmware on their radio models. I understand why you thought their wouldn't be a difference considering most of these units come off the same assembly line but they typically have their own version of firmware programmed.

[@medounenoeldia4783]

Thanks my dear, That's petty because Neuni customer service doesn't answer to my request relative to the N17 frequencies. Do you have any information about that model ??? List of frequencies ou software ??? Thank you for helping.

[@The123Now]

You can use the same frequencies if your in the US territory including Alaska & Hawaii. I'll post a new video soon with details on how to program other types of radios using the software Chirp

[@medounenoeldia4783]

Thank you very much... Unfortunately I am out of USA.

[@The123Now]

Medoune Noel DIA may I ask what country you're located in?

[@jeyzong101]

i wish u can have done this earlier then rerecord so to save some time explaining and walking us thru the tutorial

[@The123Now]

The audio is from the original recording, I used an external audio recorder and had to try to synchronize it with the video so it was a little off, my bad. still trying to find a decent editing software

[@donalddonaldson3821]

When I reprogrammed my radio's just as you did I have a beeping sound from 1-15 and the language changed to Chinese. How can I stop that from happening.

[@The123Now]

Hi Donald, sorry to hear about that, here are some things that you may try. First under programming software make sure you read from the radio to see what the current settings were, then after you make the appropriate adjustments to your liking, you may perform the write function(reading it verifies that your pc connection is working). Second, under language it says ENG or English. Also remember this radio isn't a dual band and only has a 00-470 Mhz frequency band. Try to also reboot your computer that may also help. Good Luck!

[@donalddonaldson3821]

Aaron Hargett Ok will try that to see if it works. Thanks

[@michaelscolfield14]

same thing happening to me. did you resolve it?

[@michaelscolfield14]

try using chirp as programming software

[@htcdesirex6185]

I had the exact same problem. Look/listen and, just, do what the guy says below. It works perfect on my BF-888s: kzbin.info/www/bejne/fandapedntV-e6s

[@prahtik]

Hi, FRS/GMRS Channels can be used in india also or only in u.s and canada ? And is it legal ? Thank you.

[@The123Now]

prathik rashinkar From what I know Canada has a different set of frequencies than the US, it can simply be found by googling Canada family radio band. I'm am however uneducated on India's family radio service. I hope this helped, good luck!

[@mannyperez2141]

How did you get the PC software?

[@The123Now]

Manny Perez you should be able to just Google bf-888s programming software. If that doesn't work digging through Online files. I'm going to post a copy of my installation file on a Google Drive and provide a link to you guys at some point

[@blueguy9194]

What website put a link in description please

[@jonathanalius1430]

what kind of license do you need to use this?

[@The123Now]

Jonathan Alius if you are using gmrs and FRS frequencies within the US then you do not need any licensing to operate. If you are using frequencies that are required to have licensing under the FCC guideline then you may need to visit purchasing a license for a certain frequency. If you need to use this along with business radios and stuff you should be able to use it no problem. Just make sure your frequency doesn't interfere with any local law enforcement or federal agencies otherwise you could be fined up to several thousands of dollars and have issues and you can face prison time depending on the rules and regulations locally.

[@jonathanalius1430]

Aaron Hargett thanks a lot

[@The123Now]

Jonathan Alius happy to always help! Good luck sir!

[@fredrhodes540]

Ok so I followed did the exact same thing you did. But after I downloaded the new frequencies to the radio it speaks in Chinese and has a high pitch screech!!! I hooked up my other radio downloaded the old frequencies into the screeching radio and it worked fine again. Just can't get the new Freq to upload. Have checked your settings on the screen compared to mine and look the same. HELP! :)

[@fredrhodes540]

Well I was able to program my radios by using chirp on an older computer. I have a laptop with windows XP and it worked perfect!!

[@bjornleonard2974]

Fred Rhodes Hi fred please help me to program my radio I accidentally wiped all the frequencies

[@fredrhodes540]

Download the Chirp Program on an older Windows machine. My laptop is an old Windows 7 operating system. Do this and it is a snap! Of course you need the programing cord and your programing frequencies.

[@bjornleonard2974]

From which website do I download Chirp?Can u please email me the default frequencies.

[@fredrhodes540]

Bjorn Leonard here is the website. chirp.danplanet.com/projects/chirp/wiki/Home if I had your email I could send you the file with the Frequencies for the 16 basic channels.

[@endrihalilaj]

Hi I have a radio BFDX model BF-620 radio can you help me how to program ?

[@The123Now]

That model seems to be more of an "oddball" so I'm not exactly sure if programming is fully supported by this radio, try using Chirp Programming software and see if your radio is listed. I hope this was helpful, good luck!

[@redoyhossain4545]

Hi how do i program this beofeng with my other Weierwei radio?

[@The123Now]

+Redoy Hossain look up your other radios manual or frequency chart there should be something from the manufacturer giving you a listing of the channels that it uses unless you program your other radio to work with these instead. I hope this helps, good luck!

[@RathnakumarKrishnan]

Im having Newer(green) model is that possible to program 27 mhz

[@IhsaanAbrahams]

400 - 470 only which is UHF

[@Tirufam]

I can't program my baofeng bf 888s no matter what I change it becomes chinese and no frequency recorded every time I write it on my radio.

[@The123Now]

Hi Michael, appreciate your comment. I believe some computers (especially older models) are not compatible with these radios without the appropriate drivers, make sure you use a Baofeng USB A to Hand-mic cable, also be sure you have the latest version of the software on your pc, ( I don't reccomend Apple). Also make sure you connect the cable to the radio first before you turn on the radio. Try those things and hopefully you'll have better luck. I won't make promises because these radios are wonderful yes, but are a small portion of the market meaning compatibility issues would be common.

[@solitaires2772]

Hi, can someone help me how to make my baofeng 888s compatible with motorola radio?? Cause i can't. Communicate wtih the motorola radio . thanks.

[@christianolivares7186]

Do I need a license to use this walkie talkie radio

[@The123Now]

Christian Olivares you'll only need a license to operate on channels that are not FRS or gmrs. Some business radios I have different channels and our licensed by the manufacturer but these radios are not traced and unless it's a private frequency that the company purchased the license through you would simply need permission to dial it in but, if you are using frequencies from a radio and are not sure then you should probably check up with whoever you were using the radio for or see if the frequencies are being used for law enforcement for any emergency services that might receive interference from your Transmissions.

[@45AMT]

You need a license in the US to use GMRS Frequencies. FMRS don't require a license, but there is a power limit of 1/2 watt. (500 mw) These radios exceed the power limit, and these radios are not type accepted by the FCC for use on FMRS.

[@laoluu]

Ctrl C / Ctrl V (copy / paste) Just thought I mention it. Otherwise, good explanation. Thanks!

[@The123Now]

laoluu you are right, that is the proprietary keyboard entry for copy and paste on Windows and Mac devices, however this software and particular doesn't allow that keyboard function to work.

[@darksceptre7]

Ey, good vid, but how come when I try and read the radio on the program it just says it cant connect?

[@TheMatthooks]

Make sure you have the correct programming cable, that the radio volume is set to maximum and that there is charge in the battery. Then make sure that you have the correct COM port selected.

[@mikebouchard8753]

I am watching your video on the software baofeng 888s. what is the link for the software? All of the ones I have tried do not work.

[@The123Now]

Mike Bouchard I don't have the link right off my knowledge but stay tuned and I will soon be able to post a link on a Google Drive download from my software install copy

[@mikebouchard8753]

ok sounds good. thanks for your help

[@ashleypena2922]

Where could I find a setup download for a chrome book?

[@The123Now]

Ashley Pena I don't believe Chrome books support this software. Chromebooks usually run only on Android apps because it's an Android Base system and it won't have enough power for this software or any of the necessary drivers which are unavailable for Chromebooks.

[@kalashnikov6640]

can you show us how to programming Kenwood tk3207 please?

[@The123Now]

I don't own that radio, but I know that most Kenwood radios are supported on Chirp Programming software, try seeing if your radio is listed. I hope this helps, good luck!

[@michaelscolfield14]

so there is no fix for that? does that mean i cant program it?

[@The123Now]

Ancowes I would look into either getting a refund or an exchange for your product, some of the items were shipped with bad firmware

[@michaelscolfield14]

i am using chirp now, i think if you use chirp it will work.

[@The123Now]

Give it a try and comment if it works. I'll try to make another video if you or I find a way to use chirp to successfully to program these faulty units. Good luck!

[@stephenwilliams5201]

Mine works fine on chirp. And ms windows7 business. Only thing is I am blowing out the prolific chip set so I cut down the volume to about 2/3 . And rembering to start with low volume I think the start up lady (too loud) kills the chip set. so start low then go 2/3 all good then. ^_^ No blowouts kv4li 73

[@KalterKrieger]

The software is totally buggy (2013 last update). I your select UHF, you can enter 4xx numbers, but the devices beep all the time. Better use CHIRP.

[@The123Now]

I agree, however, unfortunately I still believe this model is non compatible with Chirp software hense my using of the proprietary software. I'm also told the beeping has something to do with the firmware being buggy on the actual radio and not the software

[@KalterKrieger]

@@The123Now It is not 100% compatible, you can't edit the properties, only the frequency tables. I have 4 devices, the newer ones have a different behaviour. They beep, when freq entry is left empty. Most functions like VOX, language etc can be switched with PTT+Monitor during Power ON. Ups, still awake in the US, its 1.30pm here in Germany, 8 hours back....

[@paparaotango9345]

Sir where can I get the software

[@michaelscolfield14]

when you mean bad firmware. does that mean it cant be programmed?

[@The123Now]

Possibly, I will do some more research to see if Chirp may be able successfully program it.

[@michaelscolfield14]

well i tried chirp and it did program it

[@EdgarRodriguez-ng5xn]

Someone know how i can connect this BF-888plus with a motorolas? I have to download the program or something like that?if someone can help me pls.... 🤔

[@The123Now]

Edgar Rodriguez the Motorola's may have a DCS or CTCSS tone squelch code on the frequencies, if it's a non commercial unit look for the small number on the LCD and make sure it says 0, otherwise you will need to google Motorola frequency chart and enter the squelch code for the corresponding number for the small number.

[@duongnguyen-sy1nu]

You try to give the video more brightness it will be great if you do

[@Cultwatch123]

why wont chirp work on my PC ?

[@vladtheimpaler5550]

I ordered the cable plus software disc from amazon yesterday should have it by friday or sooner. I hear conflicting things though. Some people say chuck the CD and just go to the CHIRP website and get the sofware there becaue the software on the CD sucks. Some say the CD is ok but not great but will get things done. Also I want to know if the high/low power settings actually do anything because one video out here says if you put it on high or low it makes no difference , it will put out the same power. So much info out there and hard to decipher what the best thing to do is. Anyway, I just watched part of your vid, maybe you cover that in the rest of it lol.

[@The123Now]

VLAD THE IMPALER from what I know, the power setting cannot be adjusted and I have not found any way to use chirp to program this radio in particular. The software included in the link is the one I've used that allowed me to program this unit successfully. I've heard rumors me but I don't believe it's been confirmed to the point of it being the better option unless somebody is just more used to the chirp operating system and they go through the hassle of making it compatible instead.

[@michaelscolfield14]

also even though i change it to english. it always will be chinese until il load the default setting again

[@The123Now]

Ancowes please go through some of the other comments and I have answered the same concerns, it has to do with the radios firmware and how it communicates with the software. It's a bug that's been going through the radios and some of them work and some don't

[@oliveronfort]

how can you make it legal? i want to use mine for the family and use it private. without having to pay a single penny

[@The123Now]

If you program in FR-S and gmr's frequencies they are licensed by the US and you do not need to purchase any licensing. If you decide to use other frequencies you will need to purchase licensing. Otherwise there is no need to purchase

[@deadcryxd6863]

When i unplugged it from cable it is in chinese and beeping HELP

[@The123Now]

You will need to go back through the settings on the programming software and select the language. I'm going to post a new video sometime soon showing how to do this.

[@clockwork421]

For all the people having issues with software, use bf888s_v1.05. Search in google and download it. Thats what I used and it worked perfect. Thank you so much for the help and for posting this. Im interested in having a channel for local scanner and general emergency radio. Would it be possible to do that to 2 of the channels?

[@The123Now]

clockwork421 if you're wanting to know if the BF has has dual standby then the answer is no. You can only listen to One Channel at a time due to the firmware. I hope this helps, let me know if you have any questions.

[@clockwork421]

Thanks I also noticed the weather radios typically are on a frequency outside of the range these little guys have. However. I followed the instructions like you said and now channel 16 seems to scan and then channels 9-15 just have a sustained beep? Any idea how that would be?

[@clockwork421]

Actually, I know what happened. The software I mentioned in my first comment is only successfully importing 8 of the 16 channels. I used Baofeng ZT-V68 Programming Software which is the OEM factory version and I can see that only 8 properly were written to it. I suggest using this same method you do here in your video. Maybe try to use OEM software if you definitely need or want 16 channels working. Otherwise, even if 8 work after this most wont complain or even bother to try and remedy it.

[@The123Now]

clockwork421 I recently purchased six of these radios and three out of the five do the same thing. I can't give a definitive answer as to why but I think it has to do with a firmware bug which I can't seem to find a fix for. I think the manufacturer is looking into it currently but has not yet found a solution for consumers. They might have a recall so keep your eye out.

[@bjornleonard2974]

Aaron please email me the default frequencies.

[@ricana4308]

thanks man!

[@The123Now]

You're very welcome! I have some new videos coming soon I hope you'll stay tuned. Thanks!

[@miguelesteves9740]

The software doesn't write to the radio.

[@jamescatt3390]

I followed all your steps and my radio is talking Chinese!!!

[@RustyX2010]

after I unplugged the cable from the radio I got a really loud beep and the language was in Chinese!

[@The123Now]

You most likely reset the defaults by accident, I've done it myself. Reprogram the radio with your channel frequencies, then double check the settings for Lang or Language. Then re-write/upload the new programming to the unit. Hope that helps! Good luck!

[@michaellalwani9053]

Hi I am tuning 888s

[@redraz09]

well done good video

[@The123Now]

Thank you very much for the kind feedback! I am happy this video was useful!

[@marcobenelli739]

Where I can download the program for 888S? Can you link me please?

[@The123Now]

You should be able to google BF888s programming software its available for windows and its backwards compatible.

[@davidmartin3881]

Need help with my walk !

[@marshal7102]

That disk is useless download it from the web

[@The123Now]

I'm sorry to hear that, I currently investigating fixes with other users and will post a fix video when one has been discovered.

[@crashsitetube]

Before making a tutorial it would be a good idea to do it at least once first. Even better to do it a few times first. Especially considering that all this cheap-charlie Chinese software is crap-on-a-stick and virtually unusable. It would also be useful if the first thing you say is that you are NOT using the disk and that you've already downloaded and installed the software off the internet...and, tell where you found it and tips for doing that instead of wasing time with the disk. Geez, man. We're already fitghting this Baofeng crap without getting a rambling, simi-related tutorial.

[@nowayjose20]

Ctrl + V is paste.

[@The123Now]

Your correct, however the programming software will only allow a right click and paste selection, the software won't recognize that command key.

[@ryancbooc2805]

I copied your frequency but damn from channels' 1-15 all beeeeeeeeeeeeeeeeeeep sound the heck

[@The123Now]

Hmm.... If all the channels except 16 are not working, then you may want to return. That many defective channels is certainly odd. I'd look into a return or replacement of your unit.

[@ryancbooc2805]

Aaron, actually it's default program are working fine, but when i program it to frs & gmrs, channel's 1 to 15 beeps but only 16 is ok... i really dont get it. but when i bring it back to default, it works just fine...

[@michaelscolfield14]

try using chirp as the programmer

[@joeltampus329]

same problem here

[@joeltampus329]

the CHIRP programmer worked! thanks a lot Ancomes!

[@rbachiller2008]

so you are playing WoT...

[@The123Now]

Lol u got me. I used to play it but I have a Xbox now Lol 🤣

[@michaellalwani9561]

153.625