Bare Metal Finish on a 57 Chevy

  Рет қаралды 5,895

midcenturyscotland

midcenturyscotland

Күн бұрын

Пікірлер: 11
@DrWhom-bk7uz
@DrWhom-bk7uz Жыл бұрын
Yank here. I have a 57 Chevy Bel Air 4 door (no post)…. I am looking to do a bare metal finish on here, offset by all that chrome. Suicide the rear doors. Tobacco colored leather finish. Hook an Airstream coach on the back and call her “57 Bel Air Stream”
@midcenturyscotland
@midcenturyscotland Жыл бұрын
Sounds awesome :) I've thought about suicide doors on the back too.
@WiseManDude
@WiseManDude 3 жыл бұрын
Thanks for the info. Stay cool and stay abiding in the vine.
@midcenturyscotland
@midcenturyscotland 3 жыл бұрын
Thanks, it's not quite worked out as planned as it has gained a bit of patina, I will do a follow up video soon.
@markdavis2475
@markdavis2475 Жыл бұрын
Hi. Im using exactly your process on my MGB. Id be interested in how its held up over the year.
@midcenturyscotland
@midcenturyscotland Жыл бұрын
Hi Mark, I have a walk round video of the Chevy that was shot about 18 months later. It’s doing pretty well.
@markdavis2475
@markdavis2475 Жыл бұрын
@@midcenturyscotland Cool thanks! Looks very good!
@midcenturyscotland
@midcenturyscotland Жыл бұрын
@@markdavis2475 there was some initial reaction where it browned a bit under the lacquer but it’s stayed stable since
@markdavis2475
@markdavis2475 Жыл бұрын
@@midcenturyscotland Cool, thanks for the info. I had to special order the Owtrol. Got it now. Almost finished the welding! I probably will have it painted but not for a year or two!
@solartpaving1502
@solartpaving1502 3 жыл бұрын
Hi I’d be interested to know how it’s worked out as I’ve a bare metal project and I live in Devon
@midcenturyscotland
@midcenturyscotland 3 жыл бұрын
Thanks for the prompt I've been meaning to do a follow up, it's not quite worked out as I planned. After treating the whole car I had to get it outside to paint underneath. During the first couple of days there was a patina like reaction in the clear, a light rust. It stopped reacting after a few days and seems to be fixed now. I did 1300 miles in it over the last few weeks down to the NSRA Supernats amd Aberdeen, it got exposed to a lot of rain but still hasn't got any worse so it seems that its OK. There is a clip of the car right at the start of this video kzbin.info/www/bejne/fICTlIaJhsiMnpo so you can see. I will do a full follow up video soon.
How to Fix BAD body panel gaps FAST n EASY -  Metal finish - NO body filler ! D I Y Auto Restoration
16:10
Guzzi Fabrication - D.I.Y Auto Restoration
Рет қаралды 171 М.
STEP-BY-STEP GUIDE: How to Paint a Car at Home
16:52
Eastwood Company
Рет қаралды 1,3 МЛН
КОНЦЕРТЫ:  2 сезон | 1 выпуск | Камызяки
46:36
ТНТ Смотри еще!
Рет қаралды 3,7 МЛН
The Most Common Mistakes to Avoid when Painting a Car!
20:13
Paint Society
Рет қаралды 481 М.
Car Painting: How to Spray and Blend Silver Metallic Paint
20:43
Paint Society
Рет қаралды 125 М.
Ford V8s Did it First! 7 Groundbreaking Innovations from the 1930s
15:37
Best Ways To Strip Paint Off Your Project Car - Vintage Porsche 911
14:08
Garage Time - DIY Porsche Restoration
Рет қаралды 107 М.
BODY WORK: HOW TO APPLY AUTO BODY FILLER FOR SHOW CAR FINISH
51:54
Bad Chad
Рет қаралды 1,4 МЛН
Coating Bare Metal With SHARKHIDE
10:01
Patina Code
Рет қаралды 29 М.
Chemical dipping a Jaguar MK2
14:23
minute_of_dangle
Рет қаралды 291 М.
Miter Polishing Square Tube - Stainless Steel [With Basic Equipment]
4:30
How to do it yourself basic seat auto foam repair DIY
10:08
Old School Auto Upholstery Techniques
Рет қаралды 976 М.