Bare metal Foil VS EZ Chrome Showdown!! I test both and compare!!

This is just a comparison of two different adhesive chromes. Bare Metal Foil and EZ Chrome. I hope you enjoy the video.
Get a t-shirt from my Tee-Spring store!!
model-car-vide...
Visit Hobby Nut Models
www.hobbynutmo...
Go check out Chris Callen's art at his website website below.
www.chriscalle...
Join the Model Car Videos Facebook Group!!
/ 488916899181391
If you would like to send me something by mail please send to the following address.
Matthew Inman
PO box 854
Nahunta Ga 31553
******************************************************************************************************
Building items that I use available on Amazon.
amzn.to/2YIMcid Tamiya Masking Tape
amzn.to/2YiLtE6 Bare Metal Foil
amzn.to/3uGZVEs Model Painting Alligator Clip Sticks 20PCS with Stand Base
amzn.to/3ny4htf Tamiya America, Inc Mark Fit, Solvent 40ml Bottle, TAM87102
amzn.to/2NxKH3X Decal Setting Solution-Micro Scale Micro Sol
amzn.to/3ig6Dfz TAMIYA America, Inc Extra-Thin Cement 40ml Quick-Setting,
amzn.to/3vYP9cW Sand paper assortment 2000 - 10000 grit
amzn.to/3nIq9lY TAMIYA Panel Line Accent Color Black
amzn.to/3nuuvgk Bob Smith Industries BSI-157H Maxi Cure/Insta-Set Combo Pack
amzn.to/35xEFXd NEO BCN Siphon Feed Dual Action Airbrush
amzn.to/3nA9roA Clear Parts Cement-1oz
amzn.to/3cemEBI TESTORS Plastic Cement Liquid, 1 oz
amzn.to/3iPnK87 TESTORS Plastic Model Glue tube
amzn.to/3sTeiFv AMT 1:25 Scale 1968 Shelby Mustang GT-500 Model Kit
amzn.to/3sWqN31 AMT 1970 1/2 Chevy Camaro Z28 1:25 Scale Model Kit
amzn.to/36h2LWy AMT 1967 Chevy Chevelle Pro Street 1:25 Scale Model Kit
Disclaimer: As an Amazon Associate I earn from qualifying purchases.
*****************************************************************************************************

[@deepjunkgarage]

I think you're right, the E-Z chrome looks like a good product for large straight pieces like the Corvette rocker trim or maybe a 70-72 Monte Carlo rocker molding. Everything has it's place, I use Bare-Metal foil for large pieces and the Molotow pen for little tiny pieces. Good video !

[@modelcarvideos5829]

👍🏻👍🏻

[@ronstewart9792]

Great comparison, I have trouble with my bare metal foil always having wrinkles in the sheet when I get them. Then I can't get a good big piece off the sheet. Ron

[@theintake8961]

That was interesting. Everyone who watches this video will know what to expect. Thanks Matt.👍

[@modelcarvideos5829]

👍🏻👍🏻

[@scorpio5289]

Looked like bare metal foil is easier to work with but the chrome shine on the ez chrome seemed brighter to me.The ez chrome looked more realistic,at least to my eyes. So, like others have said, I think both materials have a place when building model cars.As I have learned, its just a matter of knowing what to use and where to use it which comes with experience.Thanks for the vids you produce.Much appreciated.

[@modelcarvideos5829]

👍🏻👍🏻

[@coolgoldtiger1]

Thanks for the test.and keeping an eye out for different products. I was hoping ez chrome would be a winner, as I too have had difficult sheets of bare metal.

[@modelcarvideos5829]

👍🏻👍🏻

[@keithsmodelsandrcs6593]

Id like to be able to get the foil down correctly but don't ever get it to stay u know but i try just use chrome paint pen to make things a little easier for myself but great video, 👍👍Keith

[@mightylonesome9426]

There was a foil product on the market with the Testor's brand on it it. The foil was very thin but highly adherent, much more so than Bare Metal. It was really good for small details like wing glass frames or door handles but you had to be careful because it knotted up and tore easily. Just curious if it's still available, used to get it at Hobby Lobby. I took a brush from some cosmetic stuff my wife was tossing. It has semi rigid plastic bristles and was shaped like a mini toothbrush. It was great at pressing chrome foil into surfaces that were etched or had fine seams.

[@MetalMania3DTV-TAS-AUS]

Absolutely brilliant job on these moldings (foil) cheers KC Tasmania Australia 🇦🇺🤝😎👍

[@modelcarvideos5829]

👍🏻👍🏻

[@MetalMania3DTV-TAS-AUS]

@@modelcarvideos5829 my pleasure 🇦🇺🤝😎👍

[@TerryWilsonModels]

Matt, thanks for putting out this vid. Hard to beat the king.

[@modelcarvideos5829]

👍🏻👍🏻

[@dougmulle2627]

I think both will have a place where they work better. The thicker EZ might be better for the top window trim, where the BMF gets rubbed off if you pick up the car a lot. (If you don't clear over the BMF).

[@modelcarvideos5829]

Good point!

[@TheLukaCeeChannel]

Good test/slash, review, buddy.

[@modelcarvideos5829]

Thanks Luka!!

[@michaelcooke2559]

I had never heard of EZ Chrome until this video. It was nice to see it tested against the tried and true Bare Metal Foil. I do agree with you that Bare Metal Foil works better when it is fresh. Thanks for the review.

[@modelcarvideos5829]

👍🏻👍🏻

[@paulhillclassix7676]

Nice job my friend I appreciate the comparison I have been an old bare metal foil user for a long time works great just got to be gentle carry on ✌️🍻🇺🇸🔧🔧

[@modelcarvideos5829]

👍🏻👍🏻🍻

[@bobyoung1698]

We've all had BMF that refused to stay where we put it. What many modelers recommend is heat - just a light pass or two with a blow dryer set on "LOW." It has worked for me in the past. Another trick - use a clean cotton swab dipped in rubbing alcohol to clean the area to be foiled. Let it dry and then foil.

[@modelcarvideos5829]

👍🏻👍🏻👍🏻

[@captnemomodelingzone7850]

Thank you for taking the time to do the test. You did a awesome job. I tried BMF one time never heard of the EZ. After watching this I think I need to try BMF again. Have a great week buddy

[@modelcarvideos5829]

👍🏻👍🏻

[@rickhenderson4803]

I like product testing side by side. Helps us save money at the hobby store. I have never used bare metal foil yet, but u make it look easy. Thanks for a great vid.

[@modelcarvideos5829]

👍🏻👍🏻

[@chuckymonster1000]

Thanks for the comparison great vid

[@modelcarvideos5829]

👍🏻👍🏻

[@christesta7553]

Thanks Matt for doing the comparisons on both chrome foil manufacturers. You just saved me some money. Keep up the great videos!!!!

[@modelcarvideos5829]

👍🏻👍🏻

[@kevin64573]

Nice comparison. Thanks for doing this.

[@modelcarvideos5829]

👍🏻👍🏻

[@stco21]

Alright, thank you for the product test. We now know

[@modelcarvideos5829]

👍🏻👍🏻

[@wall-e3313]

EZ-chrome might work best on pre-painted larger scale die-cast in at least 1:24 scale. Based on the effort you showed peeling it from an unpainted plastic model, I wouldn't attempt to use it on a painted one. Regarding BMF, I always by mine directly from them. I have had issues with adhesive, but it's less likely to tear in spots you cant see on the sheet. I've had that happen as other people have already mentioned. I also work primarily with 1/64 cars. When adhesive is an issue I brush some acrylic clear in the area, leave it to set overnight, then re-apply the foil. After reading the sentence I just typed, maybe I need some other form of therapy. But I hope it helps you and everyone else reading this. I've been using BMF for around 40 years now. Despite it's occasional faults, I still think its the best product around.

[@modelcarvideos5829]

Lol!! 👍🏻👍🏻👍🏻

[@doinstuffwiththings]

Cool comparison. I just yesterday (finally!) Got myself some BMF to try, watching your videos on it recently has been inspiring and motivational to kick start me. Totally your fault! Lol.

[@modelcarvideos5829]

👍🏻👍🏻😄😄

[@Aces_Eights_Scale_Vision]

Take a look at Hasegawa Mirror Chrome foil TF-01. Very thin a reflective like a mirror.

[@modelcarvideos5829]

👍🏻👍🏻 I'll check into it!!

[@arthurkindred6719]

The best thing to use when applying Bare Metal foil is to use Micro Metal Foil adhesive. Instructions say to put it on the foil. The way I have always done it is I use a brush to apply it to the chrome trim I want to apply the foil to. I put it on the trim and let it set for a few minutes and it will tack up real nice I then carefully lay it on and press it on with a pointed tooth pick and a cotton swab. Then I just trim it off. This way has always worked great for me. I hope this can help others and hope my tip here will make it a bit easier for others to use. As I said, it has always worked great for me.

[@davidchin350]

Thanks for the side by side comparison Matt.

[@modelcarvideos5829]

👍🏻👍🏻

[@pizzamanmodels9989]

Thanks Matt, great video comparison.

[@alvinpowell6189]

I have learned when I need new Bare Metal Foil I get it straight from BMF. That way you know it’s fresh and he ships it in a way that it does not get wrinkled. Also, trim 1/8 to 1/4 inch off each side before using. When the adhesive is applied it generally does not make all the way to the edge. Also I use one blade to cut the foil for use. I have a dedicated foil knife for trimming the foil on the car. And for you guys that have trouble with it sticking, keep your model clean!! I know when I get to foiling my hands sweat because my mind is telling me all the ways I’m going to screw it up! The sweat raises the oils on your skin and while holding the model you get it on the car. So I have wasted a lot of foil before I figured that out. Good luck guys, be patient, stay calm and model on!!!

[@raythackston1960]

Stick the large piece back into the space it cam...I do that and if you use it quickly it will work fine.

[@samuelvasquez8170]

I agree with the BMF problems

[@modelcarvideos5829]

👍🏻👍🏻

[@charlespalavros6952]

Thanks for sharing the tip , Have bare metal foil just haven’t had the guts to try it LOL hate to trash a paint job

[@DocsKustomKorner52]

Great review! I know Bare Metal Foil seems to have a shelf life in it. As it gets older the glue does seem to dry out a bit. Could get the same results on the EZ Chrome too, not sure as I’ve never used it before!

[@marcosfernandeznanita7150]

Awesome comparetion man, thanks for sharing

[@pissbridge]

Huh I think that was a good one to see I never knew there was another crome product I thought bare metal foil had the market cornered!!! But thank you Matt that was very helpful and I will also try the other brand as well

[@modelcarvideos5829]

👍🏻👍🏻

[@jeffhyde7934]

I used to enjoy doing bare metal, but now that my eyesight sucks, I dread it!

[@FlashSprues]

Bare Metal foil hands down. Maybe EZ Chrome would work great on larger flat surfaces such as truck bumpers. Also, found the sharp Q tips at Hobby Hobby.

[@N-Scale]

Thanks for this one. I have some Bare Metal but have NEVER used any. Crazy right?

[@modelcarvideos5829]

👍🏻👍🏻👍🏻

[@michaelhintzmikesminiature1812]

This was a Great video!!! Enjoyed watching this Mathew!!!

[@modelcarvideos5829]

Thanks Mike!!

[@waynewootton5385]

great video video

[@raythackston1960]

I would say in for a rocker panel or straight flat chrome strip...E-Z- Chrome.

[@raytheron]

I've never used EZ Chrome, but just recently received a sheet of NEW, IMPROVED BMF Chrome, which is supposed to be better (haven't tried it yet). Bare Metal also makes an ultra bright Chrome. I have a suspicion that the level of adhesiveness decreases with age, but that's just a suspicion 🙂

[@user-ni2zo5zo3c]

David R Lentz, Dublin, Ohio USA This is a delightful service to your viewers. Thanks. I also agree with your assessment. If EZ Chrome’s makers improve the adhesive backing, they may have a winner. In addtion to its smoother finish-which is what especially draws my interest-as well as being brighter, I expect that a heavier gauge metal would be less vulnerable to tearing. Now that would be a practical aspect, above and beyond any issues of aesthetics. P.S. I prefer addressing people by name. I am uncertain, though I have read in your channel someone addressing you (I think) as "Matthew". Is this correct?

[@raythackston1960]

It would be easier to work with the E-Z Foil if you cut is closer to the correct size...that large piece is sticking to the body everywhere.

[@waynewootton5385]

never done the foil how hard you push down on blade to cut the foil that frist side you did looks great to me e z foil shine better bare metal foil i think both side looks great thank you for video i wish you do more foil video i think i mine try foil

[@125scalemodeldrive]

Great comparison Mathew. An great video. Thank you for the great content.

[@samuelvasquez8170]

Thank you for sharing

[@JHartModelworks]

nice side by side. I've noticed there are sheets of BMF that have a sticker that just say "chrome" and there are sheets that say "new improved chrome". The new improved sheets seem to be thinner and easier to lay down and cut. I had hell trying to cut the standard "chrome" sheet.

[@Anonymous1999b]

Where did you find the ”New improved chrome” foil? I used to use that for years but cannot find it any more.

[@JHartModelworks]

@@Anonymous1999b Wish I knew. Got a pack from amazon. Next time I re-ordered it I got the plain thick chrome stuff. I'd say if you have a hobbytown USA or another hobby store you might check the shelves and see if you can find it.

[@kingranch1962]

Informative thanks

[@modelcarvideos5829]

👍🏻👍🏻

[@jetpack5]

BMF says to put it over paint. If you put it on bare plastic it doesnt stick as good. The adhesive bonds to the paint better than plastic i think but i dont like doing it like that. Hasegawa has mylar chrome that is great but doesnt do it all like BMF does.

[@modelcarvideos5829]

👍🏻👍🏻

[@morrismckinnon6047]

I just use that cheap aluminium ducting tape from the hardware store. There's no way I'll pay nearly ten bucks for what is essentially a piece of kitchen foil that doesn't stick all that well when I can get a huge roll for pennies and sticks like hell. It looks just as good and is easier to work with, doesn't tear like BMF as it's a bit thicker. For thinner stuff I use kitchen foil and a tack stick of glue.

[@modelcarvideos5829]

👍🏻👍🏻

[@scottbechstein5708]

You called it right. With the high cost of kits, paint and glue at some point you need to save!

[@HobbyBarn]

After seeing this video I think I will stick to bare metal foil. The EZ Chrome looks like trying to use aluminum foil from the kitchen. Maybe like you said, if using for stripes around rocker panel or something with less detail, then maybe. Thanks for posting this Matthew. Also, thanks for the prayers while I was in the hospital really appreciate it buddy means a lot to me. Have a great week ahead.

[@modelcarvideos5829]

👍🏻👍🏻 thanks Terry

[@125scalemodeldrive]

Sorry to tell you Matt, but someone sold you an old old bmf sheet. The old " chrome" they sold adhesive for. Again, there's little to no adhesive on those old "chrome" sheets. When buying b.m.f always go with "new and improved " alot better sticking ability, and I feel like it's thinner and more applible

[@Anonymous1999b]

Which store did you get the ”New improved chrome” labelled foil from? Seems like it’s gone. I also had this new, thick version, but the problem was not so the lack of adhesive but the thickness and stiffness if the foil. I believe it is nit necessarily old stock, but just cheaper to produce.

[@125scalemodeldrive]

@@Anonymous1999b I grabbed mine from a local hobby shop. That just the info the gentleman at the hobby store told me. They had both types there, and when I asked the difference that's when he informed me of the old stuffs issues. I haven't had the new improved stuff come too thick, but I definitely believe that it could happen. They are not totally consistent with overall quality. Sad too considering what they charge

[@125scalemodeldrive]

@@Anonymous1999b Ryder' hobby shop, but not sure if they have online ordering. Saginaw, mi

[@Anonymous1999b]

@@125scalemodeldrive Thanks. And yes, i didn't have any issues with the brilliant "New improved chrome" either, only with this new thicker and wrinkled product that is called just "Chrome" in the package. BMF web site also only list "Chrome".

[@MODELMIND72]

I think their both good for what their good for, EZ Chrome can always just make thinner sheets to choose from? Bare Metal Foil has always been a hit or miss depending on the age and sheet you get.

[@modelcarvideos5829]

👍🏻👍🏻

[@alanq64]

Nothing to say. Just wanted to be first at something. haha

[@modelcarvideos5829]

👍🏻👍🏻 lol

[@donneighbors1486]

Have you compared household aluminum foil with Bare Metal yet? You have to use the cheap dollar store kind because it's thinner. I had pretty good results with it on a '50 Chevy pickup.

[@modelcarvideos5829]

I haven't Don but maybe I should!!

[@donneighbors1486]

@@modelcarvideos5829 It's a bit slower than Bare Metal foil, but I think it works pretty good, and it's cheap. I used clear paint as the adhesive. You need to let it set a few minutes before you apply the foil. I've seen where some use Mod Podge or Elmer's, but I haven't tried that yet.

[@modelcarvideos5829]

👍🏻👍🏻

[@PlasticImaginationWorkshop]

Thanks for doing this, great information. How much pressure do you use when trimming it? Have you ever left a cut in the paint below the foil? Once again, thanks for showing the process and samples of each brand of foil. Great stuff.

[@modelcarvideos5829]

Yes it will definitely cut the plastic if you press too hard.

[@rlpotts99]

wow!! Seems the Bare Metal Foil wins.

[@modelcarvideos5829]

Yep

[@jodyblackwell9012]

Matt I never use that stuff all my cars are customs shaved smooth no chrome at all keep building

[@modelcarvideos5829]

👍🏻👍🏻

[@scooterdoughmas3012]

wait first of all thanks for sharing what if the thicker stuff hair dryer on low maybe try on just a body outta the juck yard lub scooter d

[@modelcarvideos5829]

Maybe so!!

[@scooterdoughmas3012]

Where did chu gettit thinking 1/8th scale might need thicker stuff 😅😘🐶🏡💝🐯too

[@robertmann7277]

I have avoided BMF like the plague because of a) the cost b)I just can't get it to go on cleanly, so I've always used the tape from the .99 cent store, that too can be a pain in the butt- maybe it and EZ tape have a thicker substrate, suggestions?

[@modelcarvideos5829]

BMF really isn't that expensive. I can foil at least 5 cars per sheet. It is the best option for me so far.

[@johnnymayo8534]

I was really hoping that the EZ foil was the answer. Just some fyi....Did u know that BMF makes an adhesive? It reminds me of Elmer's white glue on steroids. I've tried it by brushing it on the backside of BMF. I have NOT perfected the application method!

[@modelcarvideos5829]

Yeah I saw that.

[@ScaleModelMuse]

I'll stay with my bare metal foil...only decent thing about ez chrome is the color...not going to risk a paint job it sounds like duct tape coming off.

[@lonniecrittenden3531]

You know that they have a more improved version of the BAREMEATAL FOIL????

[@125scalemodeldrive]

When getting bare metal foil, you have to make sure it's the " new & improved chrome" . The normal chrome is old stuff, and little to no adhesive on it. I've made the same mistake. Don't get ultra bright chrome, or the chrome. Has to say new and improved.

[@Anonymous1999b]

They (BMF) don’t have the ”new improved chrome” any more. I have asked a couple of suppliers about what’s going on, they have said this ”Chrome” is their current chrome product. Unfortunately, as also seen in the video, it is much thicker than the ”new improved chrome” and also prone to wrinkles. It’s also hard to cut because now you cannot just let the knife lay on the foil, you have to really press it. Also harder to use in narrow places because of thickness and poorer adhesive. So even if BMF is still usable in easy parts, it is almost unusable in tougher places. Really hope they return back to the quality of New improved foil. Until then Alcklad is often the better option.

[@Burnt_clutch89]

Every peice of BMF I've gotten have had atleast 1/3rd of it crinkled and unusable

[@zeffmoreno3200]

Bare metal foil for me..

[@JohnPol]

EZ Chrome I bet it won`t go around curves to easy

[@thomastims9583]

The EZ chrome looks more like an actual chrome piece to me 🤷🏻‍♂️

[@RoadRunnergarage8570]

I have had better luck with the liquid chrome Molotov market. .