Barko 937B cutting cedars

  Рет қаралды 54,106

Jeremy Kocar

Jeremy Kocar

Күн бұрын

Пікірлер: 20
@edgewood971
@edgewood971 2 жыл бұрын
Great machine. Been using them for 8 years now. With the right tooth type/ combination the FAE head is bad ass. Only thing I see missing here is guy is not using the machine to get production out of it properly,not using the hydraulic push bar. Figure on burning 6.9 to 8 gpm per hr depending on elevation. . So using good mastication skills to get production and good use of the unit are needed. Like everyone, it takes some time and a good teacher with patience.
@jeremykocar6772
@jeremykocar6772 2 жыл бұрын
This spot in Oklahoma came to a point with a drainage on both sides that were as deep as the machine. Had to pull the trees back on the machine to keep them out of the drainage. Been running all brands of machines and heads since 1994
@addiedeguzman3201
@addiedeguzman3201 3 жыл бұрын
AWESOME machine, I enjoyed watching.some more video, thanks
@samkaufman5232
@samkaufman5232 2 жыл бұрын
Any updates on the overall machine? I'm looking at potentially a new 930B.
@AnomadAlaska
@AnomadAlaska 6 ай бұрын
Where can I hire a machine like that in Western North Carolina? I only need a day or two.
@mrjon75
@mrjon75 3 жыл бұрын
Bad ass rig.
@rickdekard218
@rickdekard218 3 жыл бұрын
I bet that smell is amazing grinding up those cedars
@benniebarrow348
@benniebarrow348 9 ай бұрын
That is a cedar eater for sure !
@jaimewerschitz5898
@jaimewerschitz5898 Жыл бұрын
Great machines, they work amazingly on dry soils, too heavy , with sinking risk on wet soils.
@maquinariaagricola8018
@maquinariaagricola8018 7 ай бұрын
Quiero comprar un aparato de estos donde lo consigo
@jeffreid3341
@jeffreid3341 4 жыл бұрын
I wonder what the daily rate is on this thing
@glenmel78
@glenmel78 3 жыл бұрын
Bruh, there's a hydraulic push bar on the thing for a reason. You'll up your productivity using it.
@jeremykocar6772
@jeremykocar6772 3 жыл бұрын
With the way this small point was the push bar wouldn't do anything but shove them off into the drainage.
@glenmel78
@glenmel78 3 жыл бұрын
@@jeremykocar6772 if you keep a slight angle on the push bar to lean against the top of the tree, the top then falls away from the cab (ideally), and you start dropping the head into the base until you hit the ground, then roll forward to mulch the top. It's a safer, quicker method. Oh, and the points on the push bar help direct the fall of the tops if you need it to go a certain direction.
@glenmel78
@glenmel78 3 жыл бұрын
I understand now you were in limited, tight quarters and see why you did things the way you had to according to terrain. I've just had a couple of close calls with tops coming into the cab and nearly crushing me. I'd hate for anyone else to have to go through the same.
@davidwalker7383
@davidwalker7383 Жыл бұрын
You're fired.
@samgolin7629
@samgolin7629 3 жыл бұрын
先拍前面啦!前面掃砍乾淨才拍攝遠啊!往前走時怎麼沒有一起前進掃砍啊?亂七八糟
@reubenfrazier5603
@reubenfrazier5603 Жыл бұрын
That’s painful to watch, might as well put it in high gear and plow over the chit and not worry about mulching it LMAO
@ВалерийПетухов-и3л
@ВалерийПетухов-и3л 3 жыл бұрын
Моеугкы
@angloonly1308
@angloonly1308 2 жыл бұрын
NO VOLUME!!!!!!
Tethering the LX870D with a T-Winch
32:43
wantowski987
Рет қаралды 91 М.
BROYEUR DANS UN BASSIN
9:19
MARTIN TP OUEST
Рет қаралды 460 М.
Sigma Kid Mistake #funny #sigma
00:17
CRAZY GREAPA
Рет қаралды 26 МЛН
The Best Band 😅 #toshleh #viralshort
00:11
Toshleh
Рет қаралды 19 МЛН
Lazy days…
00:24
Anwar Jibawi
Рет қаралды 9 МЛН
Prentice 2470 with Fecon mulcher
14:35
deepsouthrefoest
Рет қаралды 53 М.
Barko 930B with Prinoth M650 Walk-around | 320HP Forestry Mulching Monster!
7:00
Quality Equipment & Parts
Рет қаралды 13 М.
Log Skidder on Steel Tracks
14:30
G and R Manufactured Solutions
Рет қаралды 619 М.
Mulching
20:18
Swamp Gator Ulm
Рет қаралды 277 М.