How To Use A Mixer In Your Dj Setup

[@schquitagoodwin7549]

i been DJing for 15 years and he's a million percent right. it's a little intimidating but literal heaven once you get it down.

[@DjChaser]

I am thinking about getting a mixer because now iam a up and coming dj and when on social media and sometime my sound will sound so bad and iam thinking about buying a Makie

[@showbiz555]

Dude Thanks a Million. Aside from the quality of sound as a DJ I’ve always been relying on just the controller board and u just taught me a valuable lesson!!!!

[@warrenarmstrong607]

The Architect Of Sound: Yes, it is a sage investment on a product that has been around probably; since, I would say around 1972. There is nomenclature about the mixer that has not been amended all that much in 50 years; so that, it very much intuitive. The pre-amps are very solid and this will last many, many years. Keep up the good work and enjoy your sound quality.

[@mr.honesty5115]

I actually have that mixer & do the same with my DDJ 1000. It’s always better to use an external mixer simply because it pushes more sound plus all its capabilities. I purchased 2 actually one to take with me every weekend cuz I’m a mobile Dj & one for my home set up for podcasting. Great purchase & great vid bro. Now clean that garage lol

[@Dranomoly]

Use the 1/4" over the RCA. 1/4" in balanced and less susceptible to outside interference. There is a reason professional controllers (and other sound output) all use 1/4" and XLR - RCA are a good backup.

[@abesickerz]

this was my question. so RCA out the controller to 1/4 to the mixer correct? what about auxilary for phone or ipad? would i need two 1/4" or one 1/4" to connect to phone? i guess it has to do with stereo and mono. sorry im new to mixers, just got a Behringer xenyx 802 and trying to learn lol thanks!

[@bboymac84]

@@abesickerz Its more about distance and Interference. The further away you are from the speaker the more likely you are vulnerable to outside interference. get good wires and you will be fine with RCA's

[@sullycliftona]

What ,,!!'m mmmm about it !?,, Min mim moaning little petti peoplE ,, give me a life paleaszze ... the guys just saying ,, ,, init

[@djjesse1294]

Thanks bro. Can you do a full set up review. I'm interested to see how you set up for a party, including lights. Much appreciated. Thank you.

[@BarnE888]

thats actually a good idea. I'll look into making that video. thanks for watching and your comment.

[@superdad8274]

Any reason why you would not go out from 1/4 inch vs RCA? Also, why not use the xlr master in the yamaha. Thank you

[@carlos_mann]

Would using an older 4 channel DJ mixer be the same right as an alternative, instead of going out and purchasing another piece of equipment

[@DjTecniq]

The main purpose for an additional mixer is more headroom for audio. The controller has a limiter and will peak fast depending on your setup whether it’s with just powered tops or coupled with subs. The mixer will allow more volume and has a greater preamp for microphones. The mic preamp on most controllers are dog shit. The mixer is useful for better sound quality overall. The SR2 can get really harsh esp if your pushing it past 12 o clock master. I used to have the SR2 now i have the SRT. Much better sound quality imo.

[@mksfank]

My exact comment and i use a traktor s4 mk3

[@O2THEZONE1]

Hey can you let me know how you usually set your levels on yours

[@supraman112184]

I have the Mackie Mix 8. for ceremony I run the mic and laptop through it. For reception I only run the mic through it. the controller goes direct to the speakers.

[@BarnE888]

the only reason i started to do it like this was cuz of the example i gave if my laptop shuts down my controller does too because its being powered by my laptop.

[@SuAmigoElilegal]

Hello please. I have 2 new power speakers that I want to add to my already set up dj, which is 2 subs and 2 load speakers. Now ,I do not want to plug them to the monitor input. I want them on the same left and right main output so I can have more power and same fader control of all. How do I connected them

[@marcosbabeto]

Nice tips. Thanks a lot. 👍👍

[@nickybjammin7629]

Can I run the pioneer dj through my peavey XR-mixer amp ( head unit)? It’s what I would sing through in a band. I want to amplify the sound through loud speakers for the affordable, pioneer beginners DJ set up . But the little speakers that are compatible with it will not hang with my guitar metal electric guitar ⚡️

[@DJJunior192]

Good video bro but. You should connect 1/4 from your controller to your mixer. Left side on channel one and right side on channel 2. You can use the pan to switch them to left and right on the channel. It’s better then RCA bro trust me.

[@terryriderbell4558]

Hi, why is it better? especially, if I only have the RCA to XLR and no 1/4 (as we speak), what changes with the set up you sugested? whgat do you mean by using the pan to switch? Thanks

[@DjGCue71]

@@terryriderbell4558 it's not better. like the video says "this is just another way of hooking up"

[@BarnE888]

I'll Have to try it

[@longshot4484]

Make a video bro

[@NickBirge]

Came to same the same. When you do that you get true stereo sound. You could achieve the same by plugging your RCA's into separate channels. Xlr and trs 1/4 are both balanced, rca is not, that is why it is better.

[@izzys-travel]

Hi I have pioneer ddjrev1 controller and just bought Yamaha ag06 mixer but I can’t hear sound to TikTok both left and right green lights are on

[@edwinhernandez6627]

My backup is the Dennon MCX 8000 controller. If my laptop fails , all I do is move the flash drive to the controller and flip a switch, and the party/ dancing keeps going!!!! 😊 🧢🎛🎧🔊🎶🎵🎶🎵🕺💃🕺💃

[@victornaja7927]

one main out on my mixer doesnt work can i use a Y spitter and put both channels from amp to one of the mixer outputs.????

[@RazielFallen2991]

Appreciate you bro. I got my first gig in 4 weeks. I was worried I didn’t know what to do. I’m starting with a DDJ400. So there isn’t much too work with

[@vegaf2011]

Out of the hundreds of videos I watched about this topic you are the only one that I understand and demonstrates step by step how to hook all this stuff up, it’s super confusing but you made it very clear what people need. Would it possible to do one with an audio interface included

[@anthonydanielson5526]

Which make of phone are you using i have a samsung and bought a lead to do that but it didnt work so what else will i need

[@robertisabel3668]

Can you use a virtual DJ software with this controller even though it has Serrano?

[@djperez-x9g]

One question, why don´t you connect your speakers to the mixer instead? Thank you

[@Nowaythisisright]

how do you karoake with the mixer and pioneer , are you using serato ?

[@ItsPX]

Can i use a mixer like this one to map an effect on serato dj pro ?

[@SuperWorshipguy]

Thanks Barn-E, now i understand how its all connected. I have the Traktor S8 and also have the Yamaha MG 10 XU. Now I can prepare myself better. In Canada they have just announced that full capacity at venues and weddings will be allowed once again after 2 years, this will open up the business again, thanks again for the great video!

[@allancarter6473]

I agree with another comment use 1/4 inch sounds a lot better. I have always used a mixer as it does get you out of trouble, I have a 2nd laptop set for emergencies. Also means you can connect more than 1 Mic .

[@BarnE888]

yes thats the benefits of a 10 channel mixer.

[@ragnardeutsch]

Thank you for sharing...Best Regards from Bogotá - Colombia- South America.

[@atahuallpamejia2698]

Where did you get the controller case??? its awesome!!!!

[@banditt18]

i have a 6 channel pevey mixer and im just starting out was wondering if that would work or does the mixer need to have built in amp or not?

[@wolfstriker3992]

how is the sound Quality for outdoor venue Im looking into getting this mixer since Im djing more for community events at my work and I have a Pair of RadioShack 15" PA speakers with Max power of 300W

[@averymcdaniel423]

What is the cable adapter that you're running the phone to the rca cable?

[@godjchokedeezy]

I use the same mixer. How would I connect to a bar's external speakers via rca? What would be the process of signal flow?

[@concretejungle6938]

Can someone tell me what is the Grey RCA Cable that he unplugged & put in the mixer...What is the other end plugged into???

[@C-Dub1906]

Thanks Brother. I'm a new mobile Dj and have now gotten to the point where I'm looking at getting a line mixer as up until now, I've been connecting directly to my speakers from my controller. I admit I had been been intimidated by the mixers all together. After watching several videos, I'm convinced of the value this would bring to my setup and now zeroing in on what particular mixer I will purchase. Showing how you connect everything was really helpful and I thank you much.

[@BarnE888]

yea no prob. i hope my vid helped with ur decision.

[@alessandroraisaro165]

I have a Ddj flx4 working with rekordbox, do I need to buy a mixer compatible with rekordbox (pioneer) or can I connect any mixer to the consolle and still use Rekorbox?

[@temitopeodus3174]

How can I do microphone recording on my serato dj pro with my Sb3 controller ..is it possible ?

[@Midou_Maradon]

How ues to a audio interface in your dj setup

[@BarnE888]

i don't own one but i'll look into it. thanks

[@sk8tb1]

What’s the difference between the 2 channel mixer in the dj vs the 8 channel mixer on the phone. Can you just use the yamaha instead

[@henrysanchez1347]

hi i like the idea of the mixer . can I hook up and amplifier basically i have the same laptop / controller but no power speakers just passive i would have to add an amp would you know how to do this?

[@BlackLemonT]

Thanks for sharing. I’m using it the exact same way 👌 and reason bravo 👏

[@gerardocantu3646]

Any suggestions how to hook up my harbinger v2318 n 4115 to aharbinger mixer n numark mixer

[@Yakawan1969]

Hey DJ Barnie I notice you are really familiar with the Norteño Genre can you do a top 20 or top 50 must have songs

[@BarnE888]

i need to update my library first but i will look into making a video like that. thanks for the suggestion.

[@xxceesxx1]

That's a very good seggestion. I have noticed this as well. Specially cumbia norteña you have that for weeks.

[@xxceesxx1]

*suggestion

[@knino1983]

Wich do u recommend I have a small móvil dj sbd3,2 altos 312,and I want a small mixer also is behringer q802 or mackie 402vlz4?help

[@Drum4Chops88]

Nice video by the way I have a yamaha mg10xu mixer I plugged into channels 3/4 and it was peaking and distorting should I have plugged it in 5/6 UNBALANCED channels or what can you tell me what to do ?

[@user-qn5mc6vp5d]

Bro I bought a whole DJ mixer with turn tables and Bluetooth all that, but I can't figure out how to scratch and mix when I connect Bluetooth

[@henrybronxx_bomber3514]

Very informative video.. So by using your mixer there is no need for an amplifier?

[@RamboVibez]

If you’re using powered speakers no, amps are built in, unless you’re using passive (non powered speakers).

[@MobilediscowirralCoUk]

Invest in decent rca/xlr cable it does improve signal

[@JFL2Kx]

Can you just have the rca from controller go to mixer then mixer to speakers. What’s the purpose of the 1/4 from the controller to the mixer if you have RCA from controller to mixer

[@DJChi_BoccheDiLupo]

If you go in form rca to your mixer, and then outt from the mixer to your speakers, the signal of your audio will cange from unbalanced to balanced, and that's much better for different reasons.

[@snkafrica3916]

What song was that you were playing too at 1:47?

[@Hoobel]

If your controller is only powered by USB (pioneer dj 400) from the laptop.. Will the mixer get enough power?

[@williamrivera1582]

I have the sb3 can I still hook up a mixer to it all it has is stereo out

[@EnriquedAnguiano]

Is the mixer being power on its own ac outlet? Sorry for the ignorance

[@albertloyola7535]

Hey Barney i bought DDJ SB3 and used dual rca male to 1/4 in male to connect to my sony xp 700 speaker (only input/output) I am getting a lot of choppy sound lately, i changed the cables multiple times and the problems persist. I do not know if the problem is my SB3 controller or Tidal (where i pull my music from) or the speaker (its brand-new and works very well when i connect from iphone via Bluetooth) which integrates with Serato. Any guidance would be appreciate it

[@djkilo02]

Does the rca to your phone work connected to the ddj?

[@LP00151987]

Hi Dj Barney can u please show me if u use sr or mixer in auido settings in laptop ty

[@coolacadien]

I haven’t any videos yet who shows how to connect multiple amplifier to the mixer or the interface

[@carlosavalos4112]

Good video, can you do a video of how you use it? Like, how do you control the volume? Through the controller or mixer?

[@BarnE888]

ok i'll make sure to do a video about all that. thanks

[@djchikilin2956]

I have the same exact setup and i personally set my mixxer volume to my desire level and i use my controller to adjust volume depending on what you're playing. Not all songs have the same quality and volume.

[@jessiesanchez432]

I have a question, what do you guys use for music. For example I use tidal for music, but sometimes I can’t use it on my laptop all the time. I need a hot spot. To help with internet.

[@ramnamdeo2060]

Great video, thanks! Just wondering if I can setup without a controller? I plan to karaoke with youtube tracks. Also plan to play dance songs in between karaokes.

[@hbrookes]

You can, just a lot of mouse work.

[@marvinsmileyzuniga2523]

Muchas gracias DJ Barn. Thanks for the tips man I have a pioneer ddj-sr as well. my homie loaned me his 24 ch berhinger and I agree with the more channels. do you have jbl eon speakers? I have the Eon 600's & I treat them like they are my babies. Que Sigue El Bochinche 👍🏼👊🏼✌🏼🎶😎

[@MegaRiccs]

Awesome Video Brother I enjoyed your Presentation being a up and coming DJ myself

[@Alpha-ro8sc]

Excellent advice! Always have a backup. Better to have it & not need it than the other way around...

[@Veross4cs]

Question: Do you need ACTIVE speakers for Yamaha MG10xu to work properly?

[@DavidMartinez-ck6jp]

I do agree with your suggestion. I use a mixer and and it does work out best.

[@leemccoy6318]

What's the wire in the back hooked to???????.

[@djpalos81]

What happens when you plug your mixers USB straight to your laptop?

[@BarnE888]

i don't know i haven't tried it.

[@djchikilin2956]

I have exactly the same set up, including the same dj controller case. When you plug in your mixer to your computer via usb, you have a dedicated channel on your mixxer that controls your over all sounds of your computer. This comes more in handy when you use the mixer to mix digitally on different applications, such as garage band and such. Its basically an external sound card. I used it a lot to record podcast. This mixer is very nice and it enhances your outputs.

[@robatisan]

Just wandering what year your mac is?

[@just_shel5608]

Great video...I have a question how do you hook up a powered subwoofer to the mixer..??

[@djchikilin2956]

Used the main outputs to connect to the subwoofers. From your subwoofer, use your output to connect to your mids. It's basically a chain you can keep going for as long as you possibly can lol

[@djbigshay]

Does this improve the quality of the sound? As opposed to going straight from the mixer/controller to the speaker?

[@johnpascasio8541]

As previously stated in another comment. It boosts the headroom giving you higher output or louder sound.

[@gillesbuvat5865]

I have no RCA jacks on my mixer. How do I connect my dj controller to the mixer?

[@thomasblades8356]

You can use TSR cables. Connect them to the line input on the mixer, then the master out on your dj controller.

[@robertisabel3668]

Using the same process; how could I connect a sub.

[@josephelibert2464]

Let’s say I don’t have powered speakers.....how would I connect my amp to this mixer???? The same way you connect the powered speakers ?

[@Beluel]

Joseph Elibert yes

[@BarnE888]

yea basically.

[@vinniemcgheesr.5294]

Thanks for the info 👍🏾 I'm going to do this

[@essentialtv4822]

Thanks this is the reason I thought I needed a mixer.

[@naturesoundvibrations9252]

Hey brother, How do you set a microphone up with your DJ equipment / mixer.

[@djchikilin2956]

Very easy actually. I have exactly the same set up. I just plug in my microphone to channel one on my mixxer (not my dj controller), and it has a compressor that makes it sound extra nice. Try it out.

[@rayhammertime]

What is the safest / best order of turning the equipment off and removing cables in a setup like this after a set? Trying to avoid those uncomfortable loud noises and damaging equipment.🤔

[@ThePOVDJ]

Always turn your speakers / PA system off first, before anything else. Then you can unplug / turn off / disconnect anything you like and it doesn't matter. Likewise at the beginning of the setup - connect everything up and power on first, THEN turn your soundsystem / PA on LAST. If you're working in a venue where you're not in control of the PA system, be sure to check they have turned you down or powered down front of house before you disconnect anything.

[@josecarrillo735]

Good video man. What type of aux cable were you using? Ive had bad experiences with the past couple that i have bought

[@Itsdjdavo]

This ^

[@BarnE888]

to be honest i don't know the brand name.

[@PK-rl7qv]

How to connect them computer , mixer ( yamaha ) and speaker, because my kids like to listen youtube channels music pls...

[@localguy602]

Plug in via USB

[@djcook5854]

Why are using RCAs from Your Controller to Your Mixer??

[@yugaldaya4769]

What a coincidence, even I have been using the same set up but my mixer is the mg16xu....... Glad to come across this video.... :)

[@javierlagos5968]

Saludos en colombia, tengo una ddj 400 y quiero comprar el mg10xu me parece buen mixer.

[@BarnE888]

buen mixer por el precio

[@gabrielrosas5173]

Nice video bro! I gotta get me one of those Yamaha mixers

[@BarnE888]

thank you. yea look into it.

[@annaskyy6476]

You bought a whole mixer just in case your controller gives out you don’t use any of those a fx while you’re mixing???

[@djpandaproductions1223]

Okay yo lo conecto asi pero alguien me puede silucionar esto cuando voy aser mescla las cansiones el audio sale para enfrente

[@williamrivera1582]

Do you have the usb connected To the mixer

[@carlosavalos4112]

Loved this, bought one and used it when someone requests a song, not in my library but I can find it with my phone, I can have it ready and play it through that

[@pinkpanta72]

question for you as a novice; where do you set your level controls on your controller when you sdend your sound to the mixer? are all of your dials at 12 o'clock? and is your master volume on your controller at max? and is it possible to use xlr left and right and placing them in input 1 and 2 of the yamaha mixer?

[@BarnE888]

I usually have all my dials at 12 on the mixer. i control mostly everything on my on my controller cuz it makes it easier for me than to b looking over to the mixer if i have to adjust something. i can tell u how i connect everything n all my setting but if u dont have the same exact equipment as i do it wont b the same. so just try different things and see what works for you

[@concretejungle6938]

@@BarnE888 Aye Barney what is the other end of the Grey RCA cable you unplugged & put in the mixer...What is that connected to?And do you use the USB on the mixer for Serato?

[@jonathongalvan5131]

I connected mine the same way like u do

[@blackkrownempire2995]

Can u hook up mics to that rig?

[@MrLittlegrant]

so could I use this mixer to connect two controllers to the same set of speakers via the mixer so all channels come out the speakers?

[@djchikilin2956]

Yes. That is the main point of a MIXXER; to mix different inputs and control your output level all in one place.

[@perrywebster5234]

Can you play your controller without the soft wear

[@MrTomb1976]

i knew this would work, but this just reaffirmed for me what i already knew would be a good way to go so i can add some reverb on the mics for karaoke

[@ismaelpizzariano]

My Yamaha doesn’t have rca how can I connect?

[@Johnnybang916_]

I’ve been thinking about this for a while now....thank you so much!!

[@SKRecipes]

Hi brother, thanks for helpful video, I get a question. What cable you use to connect mixer to your phone,

[@Anonymous-qk9dg]

Bro go to any random mobile repair shop and ask for a sound cable . Actually I don't remember the name 😟. It will take almost 30-50 Rs

[@djchikilin2956]

A regular rca to headphone jack cable will do the job just fine. Buy one at Walmart for about 8 buks.

[@xxceesxx1]

How about a wireless mic set added to all that ? 🤔

[@BarnE888]

thats actually a good idea. i think i'ma do a full set up video.

[@josephjoestar5444]

I’m new to mixers but with a mixer u have more options to manipulate the music than just with the controller

[@josephjoestar5444]

Like getting rid of vocals and just keeping beats

[@overianlawrence3352]

How many speakers can you connect to it

[@mlg_dalinz]

Yo what typ of cords do we need to make it work and