Barricade 9500lb Synthetic Winch Install - Extreme Terrain

[@GroundPounder]

Very articulate. No rambling. Just the info you need. I watched the trailforce front bumper and winch video to prepare for my installs. Gotta go get some plastic conduit, that's a great idea. Very clean installs.

[@Airkoay]

This is one of the best instructional video for setting up bumper and winch combo from the makers of Extreme Terrain. Thanks for sharing brother, my last JKU I had the winch setup the hard way. Now I've picked up my new 2017 JKU and will surely follow your steps.

[@dennisc8664]

Great tutorial, thanks! The extra protection on the power lead cable is a good thing and I'll be doing that as well. I've noticed in a couple of your vids you do a great job protecting the wire bundles. It's always a good idea to use dielectric grease to the electrical connections.

[@patrickkirkes8360]

Thanks for the vids on both the bumper and winch install. Both my Barricade bumper and winch arrived today from ExtremeTerrain and your videos look to give me everything I need to install this weekend. Thanks again.

[@dalerpritchett]

Excellent! Very helpful video. I am in the middle of the project for both the Barricade Trail Force HD Bumper and Barricade Winch. The details you provide are very useful. The only change I made was to extend the Fog lights cable to put less stress on reach. I especially like the fact you name your wrenches as you go.

[@vics7961]

I've watched a couple of your videos now and greatly appreciate them! Great step by step!

[@invidious07]

For UV protection I recommend wrapping the end of the the rope that sticks out the front with tape, i used Gaffer Tape that I found on amazon which has held up really well. For now I am also using a cover but i plan to cut some sheet metal to cover up just the spool. I wish they made some kind of plastic cover that you could just snap on.

[@tde1970justreal]

I just bought this same bumper and winch setup from Extreme Terrain. Appreciate the videos, man! You saved me some time! My fog light harness just barely fit. It has a little bit of tension on it. Will check it after a few days and relieve some more wire, if necessary.

[@bigbo1865]

Between the grille inserts and the airflow disruption from the winch itself you're going to want to put some heat distribution louvers in that hood. Believe me. Especially if you plan on towing something of any weight over a mountain pass. If you have big oversized tires & are horsepower deprived it's going to overheat from even minimal air flow issues. If you're not towing anything of any weight and you're running normal tires should be fine & have absolutely no problems..!!! Great how to..in depth video & very informative. Great job my brother..!!! Clicking subscribe.

[@blamtheman]

Great video man. Extreme Terrain should pay you for all your tutorials.

[@Bcharns]

Great video thanks for posting. It's been a few years, how's the winch holding up?

[@clydevasey2241]

Great Video man, wife just got me a 2016 and you have made my decision to get the Barricade over the AEV very easy. Very affordable and easy to do on our own. Thank you so much!!!

[@eyelikehurdles]

thanks, not a lot of videos showing where to run the cables through and around to connect to the battery, as well as not to use those middle ones. Was really helpful!

[@GODLYNXofficial]

Great video man. I'm a new Jeep owner and this helped me out A LOT! Thanks again!

[@nathanpinho9877]

Matt Mondon

[@schmonkeeshomky5386]

If you opted out of having a rock guard, can you tell me why? I don't see the sleeve on your installed winch. I find it very helpful. Just curious why you don't use one.

[@Varge30]

I enjoy the way you installation of your winch on the bumper. I have the same bumper as you. Did you use wire loom on both cables? If you did use wire loom, you only tape at both ends, not the hold cable. But that is my choice. I did install inline a 30amp fuse holder on the positive side cable. When you install the fuse holder, solder it. Do not crimp inline, you will less chance of failure.

[@bobbyshah5743]

Excellent presentation. Direct, complete, thorough, well done....

[@doublecheeseburger1712]

Great video..... one question ,can't you just run the ground cable straight to the bumper or frame to avoid extra wires on battery, since it should be a good ground through chassis?

[@OMACMedicFiveZero]

Nice clean install, random question! What watch is that?

[@jetcarddude]

Followed your direction on mounting with winch and it came out great, thanks for the info.

[@KevinCar-jx1jw]

hows that winch holding up. wish I would've found your channel sooner.

[@conradbernard6319]

All your videos are great. Can you tell me the model number on the winch. The only one I pulled up with synthetic robe and wireless remote says it’s for an f-150

[@anibalbabilonia1867]

That will be my future proyect! I own a 2015 Jeep willys wheeler baja yellow, and i want the same kind of bumper and winch!👌😎👍great job!

[@johnrastelli1724]

OSHA approved foot ware? 😬

[@stevekline6648]

What LED bar do you have on your Barricade Trail Force HD front bumper? Great videos BTW!

[@rustyengland1465]

Are you still pleased with the winch? I'm looking at buying this winch and want an honest feedback.

[@o3djeeps]

Very. It's never let me down. If you check out my channel and search for "insurance" and then again for "pull-pal" and then for "water crossing" - you'll find 3 vids of the winch in action. I've used it more that that of course, but those ended up in videos.

[@rustyengland1465]

+OVERCLOCK3D - CPO I'm convinced. Thanks for the reply and as always great videos!

[@wtpence4731]

How thick is the winch mounting area ? No other plate ?

[@kryer3602]

I'm looking at adding this exact setup. Did you have to move the vacuum pump? I've heard different stories. I don't want to wait til I have the Jeep apart to realize I now have to order a vacuum relocation kit.

[@savagecomanche]

sean tevlin depends on the bumper this one doesn't need it moved but some will

[@christoffer1973]

Love your videos. Isn't it smart to rewire the winch whit some load after installing. What do you think? that you spol out all the rope/wire and have your car in a small slope in natural gear. And then use your car as load to wire in /preloaded the rope/wire. Hope you understand what I ment. love your channel watch your videos a few times now

[@omarvaldez9977]

for the cover did you contact extreme terrain or barricade? I know extreme terrain sells it separately

[@GLOCKCOPG23]

Very neat and professional looking job. Good work! Thanks for the very informative tutorial. Take care brother.

[@pitbull62]

Love your videos. Did you ever consider smittybilt 97495. Same price but more hp uses cable tho. Also what did u pay for ur winch. I really want rope vs cable. Appreciate any response.

[@whampers77]

How did you mount your license plate? I saw on another video you had it on but it looks like it would cut the opening for the cable in half

[@camhemmerich8473]

I'm fully aware that this is more of a winch install video. I live in upstate NY where we receive a fair amount of snow. Does anyone notice rust after a few years? From all salt on the road? (If you live in similar winter conditions.) Looking to possibly purchase a barricade bumper like this. I know they are powered coated but still? My 2012 Jeep wrangler is my daily driving vehicle and don't use it for off road. Just looking to beef up my Wrangler but not sure if it would be worth the money if it were to rust due to salt like I mentioned. Feedback appreciated.

[@JKTF476]

Thanks for making this video. Would this set up be appropriate on a 4 door? Can a single person winch themselves out or do you need 2 people?

[@o3djeeps]

Yes. Mine is a 4 door. You can winch yourself out of you have something to use as an anchor point: tree, etc

[@JKTF476]

Thank you much. I just bought my first jeep. A lot of good information on your channel. I noticed the barricade brand seems to offer good quality for price.

[@johndez9398]

What are he bumper bolt arrangements? I purchased the HD bumper but haven decided on a winch yet..... Can most any winch fit on the Barricade bumper? Are they mainly standard to mount on most bumpers?

[@trackstar1able]

Good job man you explain everything perfect and you make it seem easy which is good. I subscribed so keep on making great videos

[@allXamericanXbadass]

I noticed the chesapeake jeep club sticker on your windshield, do you live in chesapeake va?

[@GoproGuys99]

is the control box fully water proof?

[@JoeSmith-gp5dm]

I love this set up I've been looking at this bumper for a while

[@Orod_]

Thankyou from the bottom of my heart this helped me immensely !

[@ssaladino1998]

I see you upgraded from the BMW. great vids as always!

[@hondbob9263]

Is iT waterproof

[@michealbranquinho2300]

WHATS THE TIRE SIZE YOU RUNNING ON YOUR JEEP 305/70r17s?

[@trevorpool6822]

What kind of battery connectors are you using I have been looking for a set with multiple bolts to tie my lights into. What brand are they ?

[@trevorpool6822]

The battery terminals

[@o3djeeps]

+Trevor Pool It's just stock Jeep terminals.

[@trevorpool6822]

+OVERCLOCK3D - CPO Well I have a 2005 Jeep Wrangler and the terminals are in bad shape and I am wanting to get new ones that I can hook my new barricade winch to.

[@sgtnocasiousmc]

What kind of time piece are you wearing? Is that a Garmin?

[@o3djeeps]

Suunto Core All Black

[@Jonc85]

Very useful help, thank you.

[@Audel-bedolla7]

What did you use on your other videos on the winch rope that hangs out its like a ball and it's all the way in did you wraps the end of the rope with something

[@o3djeeps]

It's a Kong ball. Soon however it will be replaced with a Factor55 ProLink

[@Audel-bedolla7]

+OVERCLOCK3D - JKU is the end of the rope just orange or did you apply something to protect the end of it?

[@o3djeeps]

+Audel Bedoll the rope itself is orange.

[@Audel-bedolla7]

+OVERCLOCK3D - JKU So nothing to protect the end? Did your ever fade away? I have my fading away the orange color is

[@Audel-bedolla7]

+OVERCLOCK3D - JKU have you had that issue

[@conagherkasten4070]

Do a video of how it’s doing

[@remingtonkevin65]

Installed! Thanks for the video.

[@hartman4922]

Thank you brother, very informative. lifting that bumper with the sandals was a b-hole tightener tho.........the toes!!!! ATB.....G

[@drewbrown464]

hey. i live in north delaware. was looking at joining a jeep club. i am assuming that you are from around here from the Chesapeake jeep club. let me know whenever you get a chance. thanks

[@daviddawkins9669]

what brand of tires are those?

[@brandonbair]

What made you go with synthetic?

[@o3djeeps]

+brandonbair Light weight, safer, easier to handle. That's it really. Everyone I spoke with about winches seems to think that synthetic is the way to go these days. The ropes are stronger (in many cases) than the steel equivalents...but don't hold energy - so if they break the risk of injury is much less. They have a bit of a maintenance requirement...but if you use the cover...then pretty much everything is covered (literally). lol

[@schmonkeeshomky5386]

OVERCLOCK3D - CPO exactly why I chose synthetic. Sucks that the sun reduces their strength advantage so quick. Synthetic loses like 20% of its strength from sun burn/dry out in about 1 year. Replacing the winch "cable" is required way more often when you go with synthetic (for safety).

[@schmonkeeshomky5386]

OVERCLOCK3D - CPO exactly why I chose synthetic. Sucks that the sun reduces their strength advantage so quick. Synthetic loses like 20% of its strength from sun burn/dry out in about 1 year. Replacing the winch "cable" is required way more often when you go with synthetic (for safety).

[@CYOTsNiper]

Does it have holes in the grill guard to run wires from mounted lights?

[@o3djeeps]

No holes to run wires inside the bull bar. You could make them if you want... but I would just run along the back side.

[@440CRF250x]

Awesome videos man!

[@o3djeeps]

+dasmoose fourfourzero (dasmoose440) Thank you!

[@caliarmyguy]

Awesome video

[@cfor722]

Outstanding videos! Thank you.

[@nazerbisnar6012]

very detailed thanks for the video.

[@herrsnyder1505]

Where did you get the orange grill insert??

[@o3djeeps]

DIY job from plastic gutter guard and orange spray paint.

[@MarkFisch]

Where did u get the red grill insert?

[@o3djeeps]

I made it. :-) it's plastic gutter guard. You can find several decent videos on the process.

[@batty505]

Great vid, thanks.

[@bigwilly8746]

good stuff man

[@justinmetcalfe2669]

is that a carbon 6 ring?

[@o3djeeps]

+Justin Metcalfe No...its silicone, from Qalo

[@justinmetcalfe2669]

Gotcha, just kind of looked like mine lol kinda wish I hadn't left Baltimore, would've been cool to wheel with ya

[@m998hmmwv7]

Don't anyone believe in using locktight? And a dab of dielectric grease on the terminals. .

[@maheinicke]

Dean Labella I use No-Alox on everything, just don't get it on your fingers! lol

[@dennisc8664]

That was two of my thoughts as well. Never install electrical connections or light bulbs without dielectric grease if you want to avoid issues later.

[@Kennykoo65]

Agreed...but then all of the youtubers making videos of removing corroded, rusted bolts and nuts would be out of a job.

[@Mrn951951]

Heard their bumpers suck and rust after a year

[@o3djeeps]

If you don't take care of them... they will rust in a heartbeat. The key is to keep up on scratches and chips in the powdercoat.

[@Mrn951951]

OVERCLOCK3D - CPO I just heard a lot of reviews saying the powder coat is really thin. I just went with a smittybuilt src for like 100$ more.

[@o3djeeps]

That's a true statement. That's why you have to keep up with them. I use a rattle can of spray on bedliner to touch them up from time to time!

[@Spacesprocketz]

MD Jeepers!

[@richardspengler1794]

I really understand idiots that do mechanic work in flip flops!

[@JD-lt1kx]

I would have used red electrical tape so anyone working on my Jeep would know that's a hot wire. Otherwise a great video.

[@M70ACARRY]

That power lead needs to be fused.

[@erikaslt]

M70ACARRY yes and no.

[@neverfnquit]

Yeah it does. That's a huge fire hazard. That's what I came here to comment.

[@GrizOnTheTrail]

What amp fuze is should be used?

[@marypoppins9596]

If a person trying to steal your winch was smart enough they would just pull the whole bumper since it's so easy to take off

[@edward1730]

How can anyone take videos seriously from a man wearing sandals doing a mechanical install?

[@rockod8880]

Great video