Can a hole in the muffler cause that code?

👍👍

Dope

Excessive has some very sweet stuff. He was here in Hesperia CA. for a long while and I'd see his Jeep drive by and I would basically try to chase him down to find out about the stuff he had on his Jeep. One day Lo and Behold there was the Jeep sitting in a driveway about 6 houses down and I walked down and talked with the gentleman. I have began switching over upgrading my upgrades as we all probably do LoL. He has moved on to Texas and I don't blame him but it was nice have Excessive Industries right here in town while he was here. Great looking bumper compared to your last one. Great vid. nice work.

Good video thanks

Details in the video perfectly matched setup on my 2006 TJ with manual transmission. Even my part broke in the same exact way and place as in the video. The only glitch was in dealing with a defective replacement part. The brass clip would not stay in place as shown in video. Drove me nuts until I replaced the new clip with the old then everything was fine. Would only add that you probably won't need to disconnect the switch from the wiring in order to replace the actuator pin.

I followed these steps and I’m still having an issue with the signal. My radio piece is saying no signal when I put the truck in reverse. Any suggestions?

In my case, the USB port on the radio does not recognize my keyboard. The keyboard does not turn on. Help me!

That's cute, you have 15 ft of working space. Must be nice

I was reading some of the comments saying not to connect or use ground on RCA. My idea is that ground is ground and whole car body and chassis works like a ground and can be connected any where cable or chassis and should not have problem

Great info to connect positive along with the RCA wire, another thing you can check with multimeter for continuity of negative wire in RCA pole, i guess outside round pole and not the middle one, will check and get back. Thanks

😊

Thanks for video!

I changed the battery on mine and now it won’t unlock, lock or auto start. How can I reprogram to my car?

how do i reverse the short circuit if i touched the red and black together??

Yeah magic. Or just use a relay. Easy

Too bad the torque converter is still full, huh?

😮great video how to. I dont own a jeep but I have a second generation 2002 dakota 3.9v6 4wd. Engine from dakota could use indentical wiring from the jeep as a upgrade. I noticed the very similarities the wiring bundle kit. Does that company sell a kit for dodge dakota. Am gonna check them out as of right now Im experiencing wiring issues. Could be ground to firewall from block or alternator. Its on positive battery side. My stepfather showed me a very cool trick for positive battery terminal post not cable upgrade kits. He did tell me I should maybe use bigger gauge wire. So im thinking of just redoing whole thing I dont overland with my truck but it should help it for daily driving.

Waste of time … you explained nothing.

Great video!!

Best video for tj jeep switch

Thanks right was on the left and the bottom piece of the two piece was backwards I had no idea 🤷‍♂️ I got it and yes the entire thing moves to tighten brake or for brake.

Crystal clear and comprehensive explanation! Thank you.

Where did you get the glove box? I need one of those

Just to add , the red wire running up the camera line back to the head unit is a trigger to tell the HU to go to camera screen. Especially in the case of an android HU.

I upgraded the battery and generator cables on both of my Jeeps, one purchased, the other from scratch. The only tricky part was finding all the ground connections.

Where can i order one?

Is there on available for the center council net? I have all the door ones and love them!

Hello! I got a pir of Oracle Oculus Bi-Led Switchback headlights (JK) for my TJ. Since the TJ does not have the DRLs function form factory, im wondering how to make the halos work. The headlights came with the Switchback Turn Signal Y Splitter Adapter. I will appreciate if you can help me out. Thank you! Great video.

Geez, getting the new one to start threading is a PAIN!!!! But, thanks for the vid, it's a life saver.

I Manuvered the the nut back in place first then aligned the latch was able to turn the nut.

I got it from top with a 1/4 " rachet and 13mm socket. No problem.

Immensely helpful, spent an hour wrestling with stuck ball joints and was just about to throw in the towel before finding this video. 5 minutes later they're off. Thanks so much for posting this!

How do you turn on the weather scanning

When you are in a home screen of a launcher home do you move, eliminate or add widgets and apps?

How'd you get the nipple in the tiny hole?

Thanks buddy! this helped me alot! Fixed

Thanks a bunch! This was exactly what I was missing!

Nice that it doesn't need ground. I didn't see that one coming. Recommend people test this before they screw everything down or cut wires off, I think this is a YMMV situation. You want the screen to immediately show backup camera when you shift in reverse. Some people have a head unit that will allow you to switch to Reverse Camera input manually. - Reverse only: power from the reverse lights or trailer plug. Convenience wire to the backup wire on the head unit. - Reverse and manual on. 1) Some modern vehicles (CAN bus) provide a backup signal from the internal computer - wire Accessory only on the head unit along convenience wire to the camera power. If not, you may have to run an extra wire from the 12v accessory wire on the head unit to the positive wire connected to camera. Convenience wire positive has to be connected to Backup on head unit to positive on trailer or reverse lights for triggering the backup screen when in reverse.

To bad you didn’t use real batteries or at least be clear on which tray the main batteries sat in. To much hand jesters mad it more confusing. But thanks for at least giving it a try.

You are the GOAT! I learned so much. I bought two replacement actuators but neither would retain the brass slider so I removed it. I remnantled without the last spring as well and it works beautifully.( proof that sometimes you don’t need all the parts) Ok, the steering doesn’t lock but what do I need that for anyway?

Needed to replace the shift indicator bulb in my 15 JKU. Worked like a charm, thanks!

Did you have to program that blade before putting it into the system? Which blade did you purchace?

Does the blade cartridge have to be purchased separately?

Cerakote looks the best not sure on the others in person

Hi! Thank you for your videos! What do you think about using ORO SwayLOC in the mud. Will this mechanism work properly after really muddy trails? What about your SwayLOC? Does it work well for today? Thanks!

Thank you so much for making this video. The exact same problem happened to me.

lol I just spent all day fighting two lower mall joints. I will try this in the morning.

Be glad you didn’t hit the factory, reset clear all data because then you would get stuck on a screen that says android is starting (like for everrrr!!🤔

What a great and helpful video. My actuator looked exactly the same (busted like yours). You provided all the necessary steps. I am now back in business! Also returned the new starter I didn't need...