How to Wire Hardware Inserts w/ Audient ID44 - Arturia X8 In & X8 Out - 500 Series Rack

How to Wire Hardware Inserts w/ Audient ID44 - Arturia X8 In & X8 Out - 500 Series Rack - Stam 1178+

Рет қаралды 4,196

Күн бұрын

Пікірлер: 32

@YouTube-Account-User Ай бұрын

Barry, you’re the real deal, my friend. You speak very well and explain things where there are no grey areas. You reassure the listener with everything you say. Thank you!

@adambell4513 6 ай бұрын

Great video Barry! I u ads e the audient ID44 for over 2 years and I love it. I haven’t used any hardware beyond an ADAT for I/O expansion but hope to get more outboard in the future. This video will help when that time comes. Well done

@nunoandradebluesdrive 4 ай бұрын

This is sooo useful.. it's basically a manual of how to do and think this out! Grateful again mr! 😎😎🍺

@asabrown1430 6 ай бұрын

Was literally just looking up this info and then this comes up! Great video, thanks 🙏🏾

@bertcano 2 ай бұрын

Excellent video. Commenting for the algorithm!

@brucehathcockmusic 6 ай бұрын

Thanks so much Berry

@brucehathcockmusic 6 ай бұрын

Really curious about a smaller set up using out board gear with just the Audient inserts

@fosiko123 6 ай бұрын

exactly ; thats what i was expecting ; because im starting simple when i buy my audient in novl😃 for vocal chain - id44 - heritage i73 preamp and stamp 1176 compressor using the inserts on ID44

@michaelbonanno7476 6 ай бұрын

Thank you Awesome Barry! It’s great that you’re using the Also-Awesome id44. I only have one external compressor (Also-Awesome Stam 76+) so won’t need a 8/16 yet, but your video will be (‘you guessed it) awesome as a reference once I do. :)

@bagoodale 6 ай бұрын

Great video! Thank you sir

@francescomarrone8466 6 ай бұрын

What I'd like to see Is an explanation of what happens to the levels of a signal in an hybrid setup like this.

@roycox4415 3 ай бұрын

I use both Adat inputs on my audient id44 and am recording everything at 48. I did find that I needed to buy a standalone word clock to run everything off of because I was getting volume drops, little clicks, etc. the hardware clock ended up fixing most of this.

@ITSYABOYDONTE 6 ай бұрын

Running studio one 6. I have a rme ucx ii with a cranborne 500adat. I use the rme adi 2 pro fs as my converter. I have been thinking about how I would expand my I/O when the time come. I don't have anymore adat on the ucx ii. The adat on my adi 2 pro is free but won't show up in total mix. I'm researching it but this video is making me think about the best way to do it.

@angelabdonnavarreteblanco 6 ай бұрын

Great video! how i used in the daw?

@callumallinson814 6 ай бұрын

Hi Barry, would you then recommend the extra cost of the Cranbourne Audio ADAT 500 series products for the simplicity and needing less cables? At face value, they seem expensive but starting to see all the different components you would need to hook it all up without one. Thanks!

@pablosavat2431 11 күн бұрын

Why didn’t you use the BNC cable to sync with the Audient clock?

@BarryJohns 11 күн бұрын

- The iD44 can only accept an external clock signal though its optical inputs, the BNC connector is an output only

@fbiagetti 6 ай бұрын

The way you have it wired you would need to clock from the X8 in, you would need to use BNC if you want to clock from the audient

@BarryJohns 6 ай бұрын

Nope, you clock via ADAT.

@fbiagetti 6 ай бұрын

@@BarryJohns how? The x8in only outputs, where does it get the clock from if not BNC?

@BarryJohns 6 ай бұрын

I mention it in the video, you clock via ADAT, which is what most people have been doing for a long time.

@fbiagetti 6 ай бұрын

@@BarryJohns maybe I’m thick (wouldn’t be the first time 😂) or missing something, but as far as I can see the X8 in is a standalone device that only has adat outputs, no adat in. So it only outputs the signal and cannot receive any clock from adat. So either the x8 in needs to be the master of the whole chain, or BNC needs to be used to make the audient the master.

@BarryJohns 6 ай бұрын

These are to add additional to your main interface, not used as standalone. Your main interface, example the Audient ID44, would be your master clock, the X8 in and/or X8 out would use the Audient as the master clock.