Baseline Correction in XPS, Raman | Origin | Fully Explained

This video tells you about the easiest way to get Baseline Correction In origin Pro 8/ 8 / 8.5 / 9 / 2018 or 2019, 2020 for XPS, Raman, XRD, & FTIR etc.
=============================
Thanks for Watching
Please leave a LIKE to Support me...😋 and don't forget to...
❤❤❤❤❤❤❤❤❤❤❤
LIKE SHARE COMMENT & SUBSCRIBE
=============================
Follow “All Lab Experiments” on Social Media-
Facebook- / alllabexperiments
Instagram- / alllabexperiments
My Personal Instagram Page - / saarthakthemeaningful
Website- www.alllabexperiments.com
=============================
Need Shopping -
Here are the Best Deals on Amazon -
amzn.to/3H9sPn5
Some best PHYSICS BOOKS available Online -
amzn.to/35mJLbC
=============================
Our aim is to provide ‘Free Quality Education’. And to be very clear, this cannot be done without your love and support. Feel Free to DONATE any amount of your choice, so that, we make the best content for you at the earliest.
 Google Pay, Paytm, PhonePe @ 9555278378, UPI ID - 9555278378@paytm
 Bank Card (India) - rzp.io/l/aledonations
 Bank Card (International) - www.paypal.com/paypalme/allla...
 Bank Transfer - Sachin Kumar
(Paytm Payment Bank, Acc. No. 919555278378, IFSC - PYTM0123456)
#SupportByDonating
=============================

[@AllLabExperiments]

Hello guys! Thank You very much for watching this video. Please give me suggestions about my future videos... :-) ==> You can also "Like" us on facebook ==> facebook.com/AllLabExperiments Please "Support by donating" on the links given in the description.

[@MrSrinivasbandi]

Sir, nice video very simple and effective thanks.

[@sreevidyasankarasubramania733]

Thankyou, Your views about Einstein is very catchy, Keep it up. Very clearly explained. Let me try it. I am unable to fix the problem while doing baseline correction.

[@AllLabExperiments]

Thanks Dear for your comment! Where and which views about Einstein you are mentioning?

[@cesareduardofigueroacastan6435]

Congratulations! great video! Do you have any video to determine the G and D peaks of DLC (Diamond-like carbon) Thanks.

[@henigg]

Thanks, simple and very effective

[@ppamonha]

Congrats! Very Usefull video.

[@AllLabExperiments]

Thanks @Pedro Oliveira

[@minarazavi9813]

Thank you very much, very well explained.

[@deeptisharma8151]

Thanks a lot for this video

[@jyotinarwal6795]

Good job 👍👍thanks a lot

[@Evellynpss]

Very Nice!!!

[@numanahmed9300]

thanks from Pakistan

[@manhngo4275]

Thank a lot

[@priyankasshaji1237]

Please upload more useful video. It will be very helpful for the research students.

[@AllLabExperiments]

Thanks Priyanka

[@prakashbinnal7884]

i want to find area under the D and G bands of Raman spectra...do you have video link for it sir..can you please share

[@AllLabExperiments]

First do baseline correction then do peak fitting. You will automatically get area in case of peak fitting. But in case you already have a defined peak then you can use this video to find the area kzbin.info/www/bejne/fISWe6uQor-hj7s

[@naranchimegichinkhorloo6434]

Hello, can I do this method on my DTA measurements as well?

[@AllLabExperiments]

Yes you can

[@mohan5912]

Why do you want to do on DTA measurements

[@user-ij5cy9hw1o]

Unable to establish autoupdate. Recalculate mode is set to NONE. shown by origin after completing the steps

[@minalfatima7779]

How to fix Raman baseline corrected Graph if it is out of line along X-axis

[@juraijk1582]

How can be find ID/IG ratio

[@AllLabExperiments]

What are Id and IG here?

[@juraijk1582]

@@AllLabExperiments Ratio of the intensity of D to that of G band.

[@AllLabExperiments]

@@juraijk1582 When you do peak fitting which is a separate video. You get their areas and height. For some characterizations people use the ratio of their height while some guys take the ratio of area (only if both of the bands are same kind of gaussian or other curves). Hope it is fine... Check my how to deconvolute video for getting these parameters.

[@vidal9747]

I can't select the smoothing method. It's written "Adjacent-Averaging smoothing is used" and I don't have the option to select the Savitzky-Golay option.

[@AllLabExperiments]

Which version of origin do you have

[@vidal9747]

@@AllLabExperiments 9.7.0.185 (Academic)

[@AllLabExperiments]

Aaa. Strange... Look around if you find it. In my opinion it should be there but don,t know about the latest version.

[@vishnu6398]

@@AllLabExperiments I am also facing same problem. Mine is 9.5.1.195 version

[@rohinizambare8675]

I am facing a error like: pa_basesubtr:X-Function failed to execute Invalid PA instance Please can you help me in this

[@AllLabExperiments]

Sorry but i have not seen such an error. Maybe something, some step or some data point could be wrong. As i have not seen such an error. I am not able to anticipate the reason behind.

[@franciscauzieda6227]

Hi! is it normal to lose counts after the processing? My original data shows peaks up to 4500 counts and after the substraction, the counts for the same peaks decrease to 600 counts!

[@AllLabExperiments]

Generally this doesnt happen. May be some option is controlling that check for that...

[@franciscauzieda6227]

@@AllLabExperiments Thanks for your reply, the issue is that I´m a new Origin user, so I´m not familiar with it. Do you know where can I find more info on this problem?

[@AllLabExperiments]

@@franciscauzieda6227 i dont think that specific solution could be available at any portal. Bt jss move around the options given on the main menu when you do this. May be you get to solve it. If there ia no change in plot when you look at it. In that case you can perform interpolation to increase no of data points if that is mandatory to show.